Vista said the «failed to load the user profile» user login

I looked on the site to see if others have had this problem and that they have. To resolve this problem said to press F8 at boot and choose Safe mode. I tried this and once I press f8 all that happens is kette - drive 0 see a failure. I have no idea what this means and nobody had this problem here before, so how can I fix this so I don't have to take my computer to a best buy and pay for repair

Hello

See the following message if necessary, and then return to it if the problem is still present.

You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.

Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been
known to cause this problem.

How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

How to fix error "your user profile was not loaded correctly! You have been logged on with a temporary
Profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

BE VERY CAREFUL IF YOU USE THIS ONE:

DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.html

Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or
two with the same password) use to test or difficulty of the other.

You can run the Admin account hidden from the prompt by if necessary.

This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
not that an Admin account that is not used except for testing and difficulty).

Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

I hope this helps.

Rob - bicycle - Mark Twain said it is good.

Tags: Windows

Similar Questions

  • I get "failed to load your firefox profile. It may be missing or unreachable. "When I open firefox and when I try to open the Profile Manager.

    I get "failed to load your firefox profile. It may be missing or unreachable. "When I open firefox and when I try to open the Profile Manager.

    OK I don't know what helped me exactly... but that's exactly what I've done so far.

    1 windows-key + r & open '% appdata%\Mozilla '.
    2 right click somewhere on the empty space in this folder, go to properties and make sure all protection read only for containinh the files and folders of
    3. Open firefox (version 13) has not been opened. Error as seen in the screenshot above.
    4 uninstall firefox.
    5. install firefox beta 14.6.
    6. Open firefox, works very well.

    I'm not sure if step 2 has helped as well as of the uninstall and reinstall.

    Thank you once more for the answer.

  • I am trying to load Windows Easy Transfer in Vista, but the temporary profile enable

    I am trying to load Windows Easy Transfer in Vista, but the temporary profile allow it. How can I work around it?

    Hi James,

    You say that you need help with a temporary profile? If so, please see the following:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/Vista-will-not-load-my-profile-a-temporary-one-has/109e1238-596f-4082-a79f-b1fb884d0fc0

  • Windows XP home do not move to the user login screen too early.

    How to configure Windows XP home do not go to the user login screen after a short period of time?  Very irritating.

    Go in Control Panel > display > screen saver .  Change the settinghold and/or uncheck the box on resume, password protect . Boulder computer Maven
    Most Microsoft Valuable Professional

  • Please suggest, on the report of the User Login/Logout time consulted responsibilities, accessed Modules, what he did during his connection in R12.

    Hi gurus,

    I need your help. My requirement is as follows.

    1. my company wants to control the User Login/Logout time, consulted with responsibilities, accessed Modules, what actions he did during its connection... Can we get this report? If yes pls Guide...

    2 is the data in the fnd_logins table to get the purge after 24 hours, if so, how do not purge get...

    Thank you very much in advance

    Kind regards

    Afzal.

    WA alaikoum amani brother Salam,

    Check search content Hussein as he would certainly help.

    At the same time, also have a look on the following site

    Oracle Apps DBA online training,

    Queries for SESSION INFORMATION

    Number of users connected to Oracle E-Business Suite

    Hope this helps

    Best regards

  • I uninstalled Firefox on my computer, then I reinstalled and tried to run, but this message appeared, "failed to load your Firefox profile,"

    I uninstalled Firefox on my computer, then I reinstalled and tried to run, but this message appeared, "failed to load your Firefox profile. It may be missing or inaccessible"and Firefox does not open.

    I tried press windows key + R on my computer and open %appdata%\Mozilla\ - and rename the folder labeled "Firefox", but he said that "the action cannot be complete because the folder or the file that is open in another program" I didn't open it and try to restart the pc, but still no help

    A likely cause is a problem with the file profiles.ini and the profile marked as the default value = 1 in this file is no longer present on the hard drive.

    • Windows: %AppData%\Mozilla\Firefox\
      C:\Users\ < user > < profile > \AppData\Roaming\Mozilla\Firefox\Profiles\.
    • Linux: ~/.mozilla/firefox/
    • Mac: ~/Library/Application Support/Firefox /.

    You can use one of them to make the Creation/use of a new default profile for Firefox:

    • Remove the profiles.ini file to force Firefox to create a new default profile
    • Use the Profile Manager to create a new profile
    • Use "Choose a folder" when you create a new profile to select the location of a lost profile and recover this profile
  • My Toshiba Windows Vista says that failed to load the user profile when I try to log in.

    He said also the user profile service service has no logon. I have not changed my password.

    Hello

    1st thing to try is the system in safe mode restore to before the problem

    http://www.windowsvistauserguide.com/system_restore.htm

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If that does not solve it read more

    read the tutorial below

    http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

    The user profile Service has not logon. User profile cannot be loaded.

    http://support.Microsoft.com/kb/947215#letmefixit

    Your user profile was not loaded correctly! You have been logged on with a temporary profile.

    http://support.Microsoft.com/kb/947242

    If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

    http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  • My user account will not open a session. message, said the user profile service failed.

    Two days ago, I try to connect my messgae of acct user popped up of service user profile service failed to connect. Have the other 3 acct and they connect without any problems.  How can I fix it?

    Hello

    These methods should help for Windows 7 or Vista.

    References to Vista also apply to Windows 7.

    You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. THE ADMIN
    Safe Mode account has no default password (so unless someone changed
    the password should be available).

    Some programs such as the Google Updater (if you've added the Google toolbar,
    Chrome or Google Earth) has been known to cause this problem.

    Error message when you log on to a Windows Vista-based or Windows 7
    computer by using a temporary profile: "the user profile Service has no logon.

    Unable to load the user profile.
    http://support.Microsoft.com/kb/947215

    Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
    http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    How to fix error "the user profile Service has no logon. Could not load user profile. "in Vista & Windows 7.
    http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    How to fix error "your user profile was not loaded correctly! You have visited
    logged on with a temporary profile. "in Vista & Windows 7.
    http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

    BE VERY CAREFUL IF YOU USE THIS ONE:

    DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

    ----------------------------------------------------------------------------------------------------------

    For Windows 7:

    How to enable or disable the built-in Windows 7 Administrator account
    http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

    Use the hidden administrator account to lower your user account APPLY / OK then
    Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
    If necessary after following the above message.

    You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
    your password even (or two with the same password) use a test or difficulty to another.

    You can run the command Admin account hidden from the command prompt
    from there if necessary.

    How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    What are the system recovery options in Windows 7?
    http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    ----------------------------------------------------------------------------------------------------------

    For Vista:

    How to enable or disable the real built-in Administrator account in Vista
    http://www.Vistax64.com/tutorials/67567-administrator-account.html

    Use the hidden administrator account to lower your user account APPLY / OK then
    Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
    If necessary after following the above message.

    You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
    your password even (or two with the same password) use a test or difficulty to another.

    You can run the command Admin account hidden from the command prompt
    from there if necessary.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    What are the system recovery options in Windows Vista?
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

    How to create a Vista - free methods recovery disk
    http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

    ---------------------------------------------------------------------------------------------------------

    If you can't access your old account you can still use an Admin to migrate to one
    new (remember to always leave an account Admin who is not used except)
    to test and difficulty).

    Difficulty of a corrupted user profile
    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • DUN connection Bluetooth for Pocket PC, Vista and the user rights restricted

    Hallo,

    I managed to establish a DUN connection to my smartphone WM5 Pocket QTEK 9100 Bluetooth-based and the Toshiba Stack, latest version. My laptop is an X 200 - 21 d with Vista Home Premium.

    Everything works although I do not change the Vista user to a user with restricted rights, for the user with the Bluetooth utility administrator rights has created a new DUN connection and a new modem with a virtual COM port. The user with restricted rights is not allowed to set up a new connection, but it is necessary to connect to the smartphone with the Bluetooth utility. On the administrative account the option button to allow the connection to call other users is disabled and grayed out, so there is sort now open it up to other users.

    How can I set up a Bluetooth DUN connection for a user with restricted rights?

    Thank you in advance!

    If the user restricted use the same DUN like the Admin Setup?

    If Yes, then you can use "Bluetooth-> custom Mode settings". This allows you to
    Select the "Standard 33600 Modem" from the list that has been set up before
    the admin. So every ONE that has been configured by the administrator can be used by the
    User restricted with this method. Restricted users cannot install hardware, so
    If the administrator has not installed a modem, then also the restricted user cannot use it.

    The Admin can pre-install a modem with Bluetooth stack installation.
    This is useful if the restricted user should be able to configure a DUN connection
    with the advanced modem settings which are not used by the administrator.

    This should be possible if the file "as.ini" has a line "MODEMINST = 1".

  • Someone put to the top of my laptop with vista and the local profile, user, admin isn't me how can I fix it?

    I would also like to know how change the user local profile so that my name is displayed as I keep saying that I don't have administrator privileges for my own laptop

    Hello

    ·         Your computer is on the field?

    ·         You are logged as administrator?

    I would be creating a new profile user such as your name and transfer the data from the old user profile and delete the profile follow the steps mentioned below:

    Step 1:

    Create new user account follow the steps in the link:

    http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

    Step 2:

    After above step, follow the steps in the link to transfer data from the old profile to new profile:

    http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  • After you start the HP Vista laptop, the user account shows as a user of kiosk

    Separated from the:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/Vista-user-account-issue-kiosk/798e04ac-ba6e-4514-85E4-ee521f4ba2c9

    Hi, I bought a computer hp laptop, when I stopped and then to turn it on again later, it came with Kiosk user, I can't get off to this user or connect to it I would be appreciete of help if someone knew how to enable offshore or let me on the user I created.

    Hello

    ·          Did you the latest changes on the computer before the show?

    I suggest you to follow the steps in troubleshooting this article and check if it helps.

    How to use system restore to log on Windows 7 or Windows Vista when you lose access to an account.

    http://support.Microsoft.com/kb/940765

  • Vista-Help Page fail to load

    Whenever I try to access my computer as well as information on the performance and management of network and sharing Center says page failed to load. Help, please.

    Hello

    Those who are closely related to EI so please do these:

    What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
    machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

    IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

    IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

    Close IE and restart IE

    Looking for unusual Addons, BHO and other:

    IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
    "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

    Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
    are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

    Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
    are bad, but some can cause your question (toolbars are BHO).
    http://securityxploded.com/bhoremover.php

    Startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    Also get Malwarebytes - free - use as scanner only.

    http://www.Malwarebytes.org/

    --------------------------------

    Try these to erase corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

    sfc/scannow

    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log
    http://support.Microsoft.com/kb/928228

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • How to execute a method after the user login

    Hello
    I have an application with a public and non-public part. When a connection from the user to the application, I want to execute a method in a session bean to load default data in certain properties in the session bean. How can I execute a method after a connection/disconnection from the user of the application using the ADF security? Is the only Posibility to write a custom plug-in? If so,... How can I easily extend an existing connection module?

    Kind regards
    André

    Hello

    How is that you are relying on the login? You can connect to WLS FRO m backing bean (see this ) and if everything is ok, call your session bean method.
    You just need the reference of session bean in your backing bean (@EJB injection (yet?) does not work for the safeguarding of the beans, so either do the JNDI research or expose the method in the pageDef and then solve / execute it in the bean to support).

    Another possibility would be to place - the method call activity after your login to the adfc - config.xml, but this page depends on how you set up logging. So, the first solution should work.

    Pedja

  • 10.11.6 OSX have a bug on the list of the user, login screen

    Hello

    I am disable the user invited,.

    but after the restart or shutdown and power on it my login select Show mac my user screen and comments.

    I have a question, in this case, however solve?

    AFTER PUTTING IN

    There are two users invited, not related to each other.

    One is the guest user that you turn on or off in the preferences users and groups window.

    The other is the Pseudo-compte of "Guest user" which is activated automatically when you enable find my Mac. It is not a real user, but a recovery mode in which Safari is the app available only. The idea is to allow a thief who steals your computer to browse the Web so that it will stay online and give you time to locate the device.

    When 'Find my Mac' or FileVault is turned on, the first guest user is automatically disabled and cannot be re-enabled.

  • Scoreloop, set the user login

    Hello everyone;

    I want to change the display/user login / drive on the server Scoreloop and I used this code:

    SC_User_h user = SC_Session_GetUser(session);
    SC_Error_t err =  SC_User_SetLogin(user, "MyLogin");
    err =  SC_UserController_UpdateUser(userController);
    

    but it has not changed on the server, although the error value is '0' which means OK.

    Thank you in advance.

    Hello, William;

    When I called 'SC_User_SetLogin' function inside the callback function it wasn't working, but when I called him in the same function as I asked the user, then it works like this:

    SC_Error_t rc = SC_Client_CreateUserController (customer, userController, RequestUserCompletionCallback, app);

    RC = SC_UserController_LoadUser (userController);

    The SC_User_h user = SC_UserController_GetUser (userController);
    RC = SC_User_SetLogin (user, "my name");
    RC = SC_UserController_UpdateUser (userController);

    In any case, I noticed that the application is connected to the game application that is installed on your device BlackBerry 10

    who, from there, the user can update his profile name and connect as will.

Maybe you are looking for

  • New issues of tabs

    Two questions and an observation:1. why the new tab icon has been eliminated? When I search I open tabs to keep track of web pages related to this topic, I am doing research. Often, a new topic or question comes to mind and I open a new window with t

  • Satellite C855 - 29 the screen flicker becomes constant

    I wonder if someone could give me some tips about the foregoing. During the last two weeks my laptop screen was flicker - colored lines transiting via the page until they get darker and darker. It seems to stop or slow down if I move the laptop (usua

  • How to get back back

    How to go back to the right.  delete goes to the left.

  • Update cumulative security for IE8 for Windows Vista for x 64-based systems (KB2360131)

    Download of the update above completely changes my settings. I can no longer choose a Standard Windows Vista or a theme based on my computer, only a Standard Windows one. Is there a solution to this? Or some elements of the update I should not simply

  • Windows 7 - (Freeze installing KB982381)

    I'm currently under Windows 7 Pro. When I'm going to update Windows 7, it always freezes, I just tried to update and it has been blocked here for the last hour to "Installing updates...". Installing Update 1 10...  Update for Internet Explorer 8 for