Vista Service Pack 1 is not available for installation

Similar Questions

• Windows vista service pack 1 will not update. I get Error 80070002.

  Vista - install a drive - error 80070103

  I am trying to install a disc and it says I have error 80070103

  I am trying to install a disc and it says I have to update my computer and my windows vista service pack 1 will not update because I get the Error 80070002

  Hello

  See if that helps you.

  "Windows Update 80070002 error."

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

  "If you receive the error Windows Update 80070002 of updates, you must delete the temporary files to update that Windows uses to identify updates for your computer. To remove temporary files, stop the Windows Update service, delete the temporary update files, restart the Windows Update service, and then try checking the Windows updates again. »

  And this Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  And there is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  Or you can repost you this link in the Windows Update Forum.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

  See you soon.

• Vista service pack 3 is not installed

  Vista service pack 3 is not installed

  There is no Vista Service Pack 3.

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows vista service pack 1 (KB936330) keep offering re installation...

  Im trying to set up a wi - fi router and it wouldn't let me software Ciscoconnect coz they need me to update my windows vista service pack 1. I did the installation several times and said successful but want to always update me the same thing again... does anyone have any idea with this? hope someone could help me... Thank you!

  Hi, Macy,.

  I can understand the situation and I'm here to help you help you with the problem.

  I suggest you to refer to the advice given by Anoop P K on July 8, 2012 and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/i-can-not-seem-to-install-Windows-Service-Pack-one/41970218-4962-449c-bd6b-66df6a0486db

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  See also the suggestions provided by Kevin D Souza July 4, 2012 and check.

  http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_update/vista-service-pack-1-says-installed-successfully/6c5c2219-9c7e-4380-bfe1-9298cb25dc91?msgId=aec5205c-0f32-4c93-b55d-fbbd30258899

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  If the problem persists or you have any other questions, do not hesitate to let us know. It is our pleasure to be of service.

  Thank you.

• Download Windows Installer for Vista Service Pack 2 is not found! Help!

  Hello

  I desperately need help.  My windows installer does not work and I have tried everything to get it going, the reinstatement of the installer and do a system restore.  The first time I did the restore system it started working, but after installing the program, I needed I got a second program that must be downloaded.  The second download received error 1719 and impossible to download once again.  I was informed by my techno I would probably need download Windows install for Vista Service Pak 2.  I have received the link below, but was not able to find it?  Is there anyone who knows where I can download it.

  This is the link that has given me is not the one for Vista Service pack 2: http://www.microsoft.com/downloads/details.aspx?familyid=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Hi kookykaren,

  1. you remember to make changes to the computer before this problem?

  The link provided also applies to Windows Vista SP2.

  You can try the following steps and check if you can download the installation program.

  Method 1:

  Reregister windows install.

  a. Click Start, click Accessories and then click command prompt.

  b. at the command prompt, type the following and press ENTER after each line:

  MSIExec /Unregister

  MSIExec/regserver

  Method 2:

  Make sure that the Windows Installer service is started.

  a. Click Start, type services.msc in the search box and press ENTER to open Services.

  b. right click on the Windows Installer service, and then click Properties.

  c. If the startup type box is set to Disabled, change it to manual.

  d. click OK to close the Properties window.

  e. right click on the Windows Installer service and then click Start. The service should start without errors.

  f. now try to install the windows Installer 4.5 from the link you mentioned

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• For Windows Vista, Service Pack 1 will not completely install.

  On Windows Vista Home Premium, 32 - bit system, trying to update Explorer 7, that no longer works, to Explorer 9, which requires SP1 (KB936330) and SP2 as required components.  I use Windows Update method, Guard sent me with Service Pack 1 (KB936330) to update.  However, I do, and then he said it will take about an hour and do not use my computer.  I do this but in a few minutes 'complete' and said "completed successfully."  I have now more than a finished SP1 (KB936330) entry on my page in the history of the update, BUT does not appear under installed updates, so it seems that's not install completely.  Why?  How should I fill this out so I can go on installing SP2, then Explorer 9?

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

• Vista Service Pack 1 is NOT installed

  So, I wanted to upgrade to Windows 7. Unfortunately my installer for 7 told me that I had to first install Service Pack 1. Large. I know I don't have because it does not appear on my list of Windows Edition. I try to get it from Windows Update, but when I search for updates, it shoots only other stuff (e.g. Office Genuine Advantage Notification KB949810), but the service pack does. I checked my update history and apparently this Service Pack 1 could not install and I received the error code 80080008.

  So I download the thing directly from http://go.microsoft.com/fwlink/?LinkID=139503, and when it finished downloading it disappears. Then I saved it on my desktop and when I click on it nothing happens. Can someone help me?

  Slurgly wrote: This would have to do with a question I had on several occasions with the installation of .NET framework 1.1 Service pack and the .NET framework through update 3.5 service pack?

  Yes, it's a possibility. These updates of .NET Framework are among a myriad of SP1 updates, like, for example, KB955430 & KB947821.

  But I'm more concerned about one or two other things:

  1. the error 80080008 is very rarely seen and suggests that an infection in progress hijackware is at the origin of the problem.

  2 Vista SP1 is available through Windows Update (for most users) since March 18, 2008 (SP2 since March 2009). It is very unusual that SP1 has not yet install on your computer again.

  How long Avast4 has been installed? What antivirus application was installed before you installed Avast and your subscription always news when you have uninstalled it in preparation for the installation of Avast?

  A Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  The foregoing, your best bet at this point may be to back up your personal data, format the HARD drive and do a clean install of Vista to get it then patched up to SP1 before you perform the upgrade to Win7.

  I doubted much that a repair installation (upgrade AKA on-site) would solve the problem. Speaking of which, have you ever done a repair for some reason installation any?

  PS: Free support for installation of SP1 problems has been available since March 18, 2008 through June 30, 2009. This support would cost you $59 USD per incident (or more) now.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Vista Service Pack 2 will not install on my Vista.

  Since the Service Pack was released I tried to install it. And each time, repeatedly, he'll prepare my computer, tell me to restart, it will do the "install Windows Vista Service Pack 2 1/3 0% Complete" thing when I restart and right at the end where it says "3/3 100% complete" it will stop for about a minute, then say "Service Pack was not installed. Returning change"and it'll take about half an hour at a time to undo everything he does simply, without any reason. I don't know what is happening, and it's the most frustrating thing because it won't go away, and I do not understand how to fix it. Could someone help me with what to do please?

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

  Microsoft free support for Vista SP2 at the link above.

  See you soon.

  Mick Murphy - Microsoft partner

• Vista Service Pack 2 will not ' cold' start

  I have a Dell Studio 1737 I bought last week. Windows Vista Service Pack 2 update offered. I selected it and ran through the upgrade. He completed all 3 steps and rebooted. Seems to work very well. I turned off the laptop and went to bed.

  This morning, the laptop complete the power on self test and went to boot Vista. Nothing for 20 minutes then a warning to the blue screen. He himself deleted before that I could read what caused the BSOD and then tried a reboot. Black screen for 20 minutes with no hard disk activity. Manually, I forced a stop down and loaded the boot menu. Choose the Startup Repair. After 30 minutes, advised by the screen to try a restore to an earlier version running. It took another hour, but it worked.

  Update Windows SP2 offered again. Thinking that it may have been an installation failed, tried again. Downloaded and installed SP2, these three steps successfully completed. Yet once computer rebooted (hot start) and did fine. Shut down the system and restarted (cold boot). Same results! MESSAGE completed and handed over to Vista SP2 and then black screen. Took me another 90 minutes, but I restored it to Vista SP1, now it works well.

  So I can run Vista Home Premium 64 bit SP1 without problem but SP2 does not work?

  Update looking for a 64-bit SP2 or just blindly offer software?

  I think that Microsoft is using me as a Guinea pig.

  I'm supposed to receive a DVD of Windows 7 from Dell, in an upgrade. I am wary to install it now since SP2 does not work yet. I was so angry, I jumped out early without digging further, but now I think I might very well be better to stay with SP1 and jump more "updates" unless someone can tell me what is happening here.

  How SP1 can be compatible, but SP2 is not?

  And if all you can afford is a response of canned paste, boiler, don't waste your time. All it will do is make me madder.

  Apparently, offered to customers by Windows Update SP2 update is NOT a complete or is not 64-bit capable.
  

  UH - huh...

  1. What is the full name of your application or the installed antivirus security suite and when (date about) because your current subscription expires?  What (other than Defender) anti-spyware applications are installed?  What third-party firewall (if applicable)?

  1B. were ALL of those applications that run in the background when you initially tried install SP2?

  2. do you have a free trial Norton, or a test of free McAfee [a] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

• Windows Vista Service Pack 2 (KB948465) not __will not install - constant judgment of Internet Explorer

  I couldn't after several attempts to install Windows Vista Service Pack 2 (KB948465).  I finished all of the instructions that will appear on the screen to fix this problem and nothing works.  I'm not a PC geek and want just to get this update loaded.  I hope that this will solve the constant stop my IE WHENEVER I use it.  I'm at a point where I want to just remove Vista and go back to XP.  I NEVER had a problem with it.

  Please contact something that can do a non-techie.  I look at all these forums, but I don't really know how to do all this.  So, unless there are instructions step by step, I'm a lost soul.

  Thank you

  Scappi

  Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself.

  [You may want to print these instructions for reference offline. If a step said to reboot, reboot.]

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  1B. download the tool McAfee Consumer Product Removal, save it to your desktop: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step # 1 above and select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  5. right-click on the file that you saved in step # 1 b above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then reboot again.

  6. do a clean install of Norton Internet Security 2011 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.
  
  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  9. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  10. restart once again & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows vista service pack 2 - will not recognize the presence of service pack 1

  Here's the situation

  I installed Windows service pack 1 (32-bit)
  computer restarts
  tried to install service pack 2, but it will not be installed because he thinks that I have not installed service pack 1
  went to automatic updates yesterday and he said that I had to install service pack 1, so I let him install that
  Updates checked to automatic update today... He always thinks that I need to install Service Pack 1 I did
  tried to install SP 2 but he always thinks that I have installed SP 1
  My ultimate goal is to install parental controls of Windows, but I think that's not possible unless I have SP1 and SP2 and Platform for Vista update

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you here what Service Packs, if any, are already installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, first of all the installation of SP1.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  And if you have any problems:

  There is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  See you soon.

• Windows Vista Service Pack 1 will not install.

  My computer tried to install Vista SP1 since April 09.   I have a Toshiba A215-S4757.  Other updates install w/no problem.

  Hi Subtru,

  Thanks for choosing Windows Vista community.

  1. can you send us the exact error that you get when trying to install Service Pack 1?

  2 have you tried to install Windows Vista Service Pack 1 from Microsoft Download Center?

  3. is this a Vista 32 bit / 64 bit?

  First of all, check that your software has been installed using the correct product key. If an incorrect product key may have been used, try to update the product key and you try to post again. To update the product key, try to validate the software by visiting the following Web site:

  http://www.Microsoft.com/genuine/validate/?displaylang=en&sGuid=6530f023-54f6-4c7f-9a06-c20cb2fdda49

  Select valid now.

  Download the standalone version of Vista SP1 package from the link provided and install mode without failure.

  Proceed to method 3 in the link below which shows how to get the latest pack of service Windows Vista from Microsoft Download Center and download the Vista SP1 standalone package

  http://support.Microsoft.com/ kb/935791

  Steps to start safe mode:

  1 restart your computer and keep pressing F8 before the Windows logo appears. |

  2. on the Advanced menu select Safe Mode and press ENTER.

  3. Once you start to move forward on the desktop in Mode safe mode and install SP2.

  You can also go through the link below indicating

  What you need to know before you install Service Pack 1

  http://support.Microsoft.com/kb/936330

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

  Hope this is useful and I would like to hear from you.

  Kind regards

  Support of yama - Microsoft.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Parental controls in Windows Vista Service Pack 1 freeze internet access for administrators

  I just bought a new computer with Windows Vista Service Pack 1 pre installed.  I've set up three profiles.  Two administrators and one user (my daughter).  When I put parental controls on his profile through user accounts, administrators are unable to access the internet.  Before you start to go through each setting and eliminate each other through process of elimination, anyone had this problem happen before?

  http://www.bleepingcomputer.com/tutorials/tutorial139.html

  Read the tutorial above.

  It is the best around on how successfully set up Parental controls on Vista.

  See you soon. Mick Murphy - Microsoft partner

• Service Pack 2 is not available

  After reformatting the hard drive with xp, trying to load service packs, but sp2 does not seem to be available.  All the info at Microsoft, explains sp2 must be loaded before sp3 can be loaded. is this true? I can not find anywhere sp2.

  From: Learn how to install Windows XP Service Pack 3 (SP3)

  "In order to install SP3, you must first have Windows XP Service Pack 1a (SP1a) or Service Pack 2 (SP2) installed. These are also available when you have automatic updates on. For more information on these commands and other service packs of Windows, go to the Center of Service Pack. "

  Service Pack Center has links to SP2 for network facilities (the full, stand-alone, SP2) and a link to the stub for SP1a (the rest of the SP1a will be downloaded from Microsoft).

• Windows vista service pack 1 did not install correctly

  prevents me to install service pack 2.  said SP 1 is successful, but later I thought that it must be installed again. ??

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.