Vista SP1 does not update problems and System Restore returns a message "system restore was not entirely successful. File system and the setting of your computer has not changed"with the error code (0x80071AA7)

0rignal title: Vista SP1 didn't update problem

So, recently, I was on my computer of gf and noticed she had some updates, it could use his computer which included the SP1 update.  So I went through the process trying to update his computer and he has been a disaster and have had many problems and seems to have tried everything.  It has a Dell inspiron 1525 and has no CD and no key for its program of Vista.  I burned a Vista recovery disk and tried troubleshooting by using that, but have not had much luck.  When I use the Startup Repair tool there is no nothing.  So I tried to use the restore of the system with the Description of "install: Windows Vista Service Pack 1.  He had a restore point saved just before I tried to update to SP1.  Whenever I chose this method, it's but the whole process then in the end it says:

"System restore was not entirely successful.  File system and the setting of your computer have not changed. "

then he begins to list the details with the error code (0x80071AA7) and then gives me the option to close or 'Run System Restore"once again that is an endless loop, because I just end up with the same error each time.  If anyone has had this problem and bring myself through it.  I don't want to reinstall windows because it seems simply ridiculous and plus that she a lot of pictures on his computer and I want to get rid of those.

If you need more information please let me know and evil provides everything I can

Hello
 
Follow the steps and check if the problem persists.
 
Step 1:
 
I suspect that your security program may be responsible for this. I would suggest you temporarily disable all security software and try the system restore.
 
http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off
 
http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
 
Note : Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
 
Step 2:
 
As for installing updates is concerned, I you should install them after you put your computer in aclean boot State. There could be a third-party software in conflict with updates. Clean boot helps eliminate these conflicts.
 
Note: Restart your machine as usual by following step 7.
 
Aziz Nadeem - Microsoft Support

[If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

Tags: Windows

Similar Questions

  • Windows 8 does not start with an error code: 0x000000f.

    Original title: trouble with pc problem.

    When I start my pc which has windows 8 on it. It is said

    Recovery

    your pc needs to be repaired

    the application or the operating system could not be loaded because a required file is missing or contains errors

    File: \windwos\system32\winload. EFI

    error code: 0x000000f

    you will need to use the tools of recovery on your installation media. If you don't have any installation media (such as the disk or a usb device). Contact your system administrator or the pc manufacturer.

    I tried to restore and recover the system, but it did not work. reset does not work. I tried chkdsk via the command prompt, but it says "unable to forward the message recorded in the log of the events with the 50 State". I m not professional and my pc vendor has no me recovery CD too. What to do please help.

    Hello

    (1) a free trial of Norton or McAfee has already been installed?

    (2) you are able to start Windows via Safe Mode?

    (3) do you see this message when you switch on for the first time under Windows?

    As you do not have installation disks which usually (and should of!) come with the computer, please see the following article:

    Create an installation media for Windows 8.1.

    http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

    Then, you can follow these steps which have been drafted by Sébastien M:

    a. Insert the media such as (DVD or USB key) and press the F12 key and click cdefault Hanger or any other option located at the bottom of the screen.

    b. in the next screen, click troubleshoot option, this will show you different options of WinRE (Windows Recovery Environment) to solve the problems with the computer when it is in no State to start.

    c. now click on repair automatic, this will open a wizard that automatically diagnose and repair problems with starting the computer.

    Let me know the status of the issue after following the steps above.

    Thank you.

  • My Windows update fails to install the important update 3, and the error code is Code 8007045 D. Anyone had this happen, and how can I fix it?

    Code 8007045 that appear when Windows Update fails to install important updates

    Short story: If you do NOT live in one of the zones listed in http://support.microsoft.com/kb/976098, you really don't need to install this update anyway so you can just "hide".

    HOW to hide an update or restore a hidden update
    http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Several windows updates are not installed and the error code given is 66A

    Original title: updates

    Several windows updates are not installed and the error code given is 66. However the error is considered to be unknown and the code is not useful to find a solution. Anyone know what the code means, or we mean?

    Hello

    1 did you change on your computer before this problem?

    Follow the suggestions and check if it works.

    Method 1

    You can reset Windows Update components and see if it works fine.

    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058
    Method 2

    You can download and run the system update readiness tool.

    Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
    http://support.Microsoft.com/kb/947821

    See also:

    Error code '0x8007066A' or "66" when you use the Windows Update Web site or Microsoft Update to install the .net Framework update

    http://support.Microsoft.com/kb/2507641/en-us

  • I can't send or receive any e-mail and the error code: 0x800CCC19 I call the provider and they say it's a software problem. Help, please

    I can't send or receive any e-mail and the error code: 0x800CCC19 I call the provider and they say it's a software problem.  Help, please

    1. Windows Mail.  But he argued that email account for more than a year without problem.

    2 here is the full error message:

    "Are subject: how pumpkin pies are made ', account: 'pop3.live.com', server: 'smtp.live.com', Protocol: SMTP, Port: 25, secure (SSL): Yes, error number: 0x800CCC19.

    ("How pumpkin pies are doing it" the subject of an email I tried to answer to and it does not work)

    I get another message when sending email: "your POP2 server has not responded in 60 seconds.  You want to wait 60 seconds for the server to respond? »

    And I'm waiting for 60 seconds, several times and it does not send

    It was 1 year there, not more. Not sure when it started.
    Read this article from Microsoft Help Support &:

    http://support.Microsoft.com/default.aspx/KB/926374

    t-4-2

  • My Vista 32 does not work with Abby Fine Reader 5.0 Sprint

    My Vista 32 does not work with Abby Fine Reader 5.0 Sprint. I have Adobe Reader 9.5. Can I both... Can I uninstall Abby?

    Hello

    I would like to inform you that Abbyy Fine Reader Sprint 5.0 is an optical character recognition program. It takes a scanned image and converts it to editable text, such as Microsoft Word or Excel.

    You can view the following link to learn more on this subject:

    ABBYY FineReader Sprint
    http://www.ABBYY.com/finereader_sprint/

    You can go through the link and uninstall Abbyy FineReader Sprint 5.0 as Adobe offers the same functionality.

    See the following steps to uninstall it:

    a. click the Start button and select Panel.

    b. select programs and features in the menu.

    c. in the programs and features window, search for Abbyy FineReader Sprint 5.0 in the list of programs.

    d. select the option Uninstall. (If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.)

    e. follow the on-screen instructions to complete the uninstall and then restart the computer if prompted.

    Hope this information is useful.

  • Cursor does not change with the selection tool

    If anyone has experienced this?  My cursor suddenly does not change with the selection tools when working on the photos.  Once I roll over the image, the arrow disappears and becomes a strange 3 little things, so cannot do any work with precision.  Still using 7 PS in Windows 7.  It wasn't a problem before.  Already uninstalled and reinstalled and the problem is still there.  I searched where this can be corrected.  So far, no luck.  Any suggestions?

    Three cursors display in Photoshop, Bridge, and Camera Raw (Windows 7)

  • KB2449741 not can not install with an error code: 80092004 in ser Win 2008 R2 Enterprise (RTM)

    KB2449741 not can not install with an error code: 80092004 in ser Win 2008 R2 Enterprise (RTM)

    Hello Muneswar M.

    Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet forum. You can follow the link below to ask your question:

    http://social.technet.Microsoft.com/forums/en-us/categories

  • PS CS6 cannot be implemented until even after uninstalling and reinstalling. And the error code is 16.

    PS CS6 cannot be implemented until even after uninstalling and reinstalling. And the error code is 16.

    Configuration error. CC, CS

  • Windows 7 backup error: the file is corrupt or has been tampered with. Error code is 0 X 80041321

    After coming back to Windows 7 pro to windows 10 I'm not long able to back up my computer.  I get an error message saying: the file is corrupt or has been tampered with.  Error code is 0 X 80041321.  Any help will be greatly appreciated.

    Original title: backup Windows 7

    Hi Mark,

    Thanks for posting your query in Microsoft Community.

    I would say first of all allows you to check if the Volume Shadow Copy service is running.

    1. click on Start, type Services in start search. When the page is open, find shadow copy Volume service.

    2. right clickon the Volume Shadow Copy service (VSS) and check whether it is started.

    3. If it is stopped, select Start or restart.

    Check if you are able to backup.

    Step 2: If you have installed a third-party security software, then try to temporarily disable the security software and check what is happening.

    Step 3: You can also try to remove the task from the location:

    C:\Windows\System32\Tasks

    How to find which task is damaged or altered.

    3. click on Start; Search type cmd in the list on the start menu, programs, right click on cmd and run as administrator.
    4. now run the following command

    schtasks/query | findstr /i

    Search:

    ERROR: the task image is damaged or has been tampered with.
    ERROR: task cannot be loaded: the task name

    Find the name of the task, try deleting the task name, and then try to recreate.

    See the link below that solves your problem.

    http://social.technet.Microsoft.com/forums/en-us/itprovistaapps/thread/dcb0fb2b-d1e3-4562-823f-cee16bfa4945

    1. click on Start, type Task Scheduler in the start search box, and then click Task Scheduler in the list programs.

    If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

    2. in the Actions of the Task Scheduler dialog box, click on create a new task.

    Check whether the problem is resolved.

    Hope this information is useful. Let us know if you need more help, we will be happy to help you.

  • When I try to create a new folder of file I get the error Code 0 x 80070570

    When I try to create a new folder of file I get the error Code 0 x 80070570

    Hello Denny,


    Thanks for the reply with the State of the question, sorry for the caused incontinence.
    I suggest you follow the suggestion of Babu V replied on 16 may 2013

    CHKDSK WARNING: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

    Please respond with the State of the question of assistance in
    Windows.

  • during installation of windows vista service pack 2, an error code comes and says that some updates to update were not installed with an error code (KB948465) _

    system information:
    Windows vista edition Home premium
    2007 micro.corp. service pack 1
    Manufacturer: Hewlett-Packard
    model: compaq presario CQ61 notebook pc
    ORP of 32 bits. sys
    Processor: cpu t3400 2.16 GHz

    And the error was...?

    Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

    =====================

    In no order given...

    How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
    [0 x Error 80070002; 0x8007000D; 0 x 80073712; 0x800B0100; & 0x8024200D]
    http://support.Microsoft.com/kb/947366

    Service pack Windows Vista and Windows Server 2008 install fails with error 0x80004005:
    http://support.Microsoft.com/kb/971204

    0X8007371B ERROR_SXS_TRANSACTION_CLOSURE_INCOMPLETE
    http://support.Microsoft.com/kb/947821

    Error message when you try to install Windows Vista Service Pack 2 or Windows Server 2008 Service Pack 2: "an internal error occurred during the installation of the service pack:
    http://support.Microsoft.com/kb/967818

    The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista
    http://support.Microsoft.com/kb/949358

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • I agree with the CC. But I also have APS CS6. I get the message that the updates are available. But whenever I try to 'install', I get the message that it failed and the error code is U44M1P7. What is the problem with obtaining this update?

    Whenever I try to install I get message that he had failed. The error code is U44M1P7. What is the problem with this update?

    U44... Update error http://forums.adobe.com/thread/1289956 can help

    At some point in the past (I don't know the exact date) Adobe "merged" the original update manager in cloud Update Manager, which means that you no longer use your original update manager

    I read a lot of posts that the updater latetest (cloud) sometimes does not work with old programs... Try to install your updates manually

    Beginning of the updates here and product selection, read to see if you need to install updates in the order of the numbers, or if updates are cumulative for the product http://www.adobe.com/downloads/updates/

  • could not open windows live messenger and the error code 80040200

    Original title: error code 80040200

    I could not open windows live messenger and the error message I got was... error code 80040200... How can I fix this... Thanks for your help

    Hi NateGoodman,

    When you use Windows Live Messenger and the question you have posted is related to Windows Live, so it would be better suited in the Windows Live community. Please visit the link below to find a community that will provide the best support.

    Windows Live Messenger

    http://windowslivehelp.com/product.aspx?ProductID=2

    I hope this helps.

  • Windows Media Player Vista when I try to play some videos, including some film my daughter loaded on a usb key that I encounter the error code cood11d1

    I presume that I have windows media version 11 of the drive and when I try to play some videos, including some film my daughter loaded on a usb key that I encounter the error code cood11d1. My attempts appear so far have confirmed that I have the latest updates available for my drive, and after you run the fix it program tell me no error or problems when identified. Appreciate any help that can be offered

    Hi at Rob Merci for the quick reply, but before that I followed one of your suggestions I confirm the error message I get when trying to play some movies is certainly cood11d1 so your thoughts before going further with thank you bob.

    ==========================================

    Followign links may be worth a visit:

    (935336) Windows Media Player 11 cannot
    read content protected by DRM on Windows Vista
    http://support.Microsoft.com/kb/935336

    (925705) when you try to use Windows Media
    Player 11 to play a digital rights management
    (DRM) - protected media file media cannot play
    http://support.Microsoft.com/kb/925705

    The security component upgrade
    http://drmlicense.one.Microsoft.com/Indivsite/en/indivit.asp

    Windows Media Player: Mini WMP FAQ
    http://zachd.com/PSS/PSS.html
    (scroll down a bit to the 3rd entry that said: Vista only)

    Windows Media Player error c00d11b1 resolved
    http://Strom.WordPress.com/2007/04/06/Windows-Media-Player-error-C00D11B1-solved/
    (it's a long discussion on the error 0XC00D11B1)

Maybe you are looking for