Vista Sp2 installation fails with the error ASN1
When I run the installation of SP2 through Windows Update or the standalone version I get the following error «end asn1» unexpected data Anyone have any ideas?
I tried everything I can think and find on the web or on TechNet. I even reinstalled the operating system and the error showed once again.
Hello RowdyMrB,
Thank you for visiting the Microsoft Answers forum.
I suggest you to run a scan of the System File Checker to see if there is corruption in your system from the wrong key of RAM,
To do this, follow these steps:
- Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
- Type the following command and press ENTER:sfc/scannow
The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
Please post back with the last 50 lines of the output JOURNAL.
Thank you
Martin
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think
Tags: Windows
Similar Questions
-
Original title: several installation update of Windows Powershell 2.0 and WinRM 2.0 for Windows Vista (KB968930) but fails with the error 800b0100 - tried Code recommended fixed but nothing works - any ideas? Alan R
Installer standalone and patches already installed - laptop Medion used - all other updates loaded ok - also tried PC Tuneup of Maestro.
Hi Alan,
Thank you for visiting Microsoft Community.
To resolve the problem with the installation of the updates, follow these methods:
Method 1:
See the article and check if that helps:
Error 0x800B0100 when you try to install updates for Windows or Microsoft Updates
Method 2:
Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
For more information about how to back up the registry, see the link:
Back up the registry
http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
I suggest that you follow the steps described in the article and try to reset Windows Update components:
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
I hope this helps. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.
-
Home Vista premium: KB978338 fails with the error code 80004005
Cannot install other updates windows update screws. Impossible to find answers to this specific problem, all the links seem to point to XP or windows 7
Went to the Microsoft site and just tried to download and install just the fix KB978338, watched as she worked, system has rebooted with what looked like 266/266/registry component machine appearing on the screen just after the message of the HP bios and just before loading windows. The PC then realized... Updates not configured correctly - returning changes.
Seem to be stuck in this loop that KB978338 will not install and stops all other updates installation as all fails with the error code 800F0826.
Hi gbislay,
I think that you are able to get on the desktop after changes have been restored.
Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below
Step 2: Download and run the system update tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.
Step 3: Clean boot the computer
Follow step 1 in the link below,
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
Important: n ' forget not to put the computer to follow normal start-up step 7 in the link.
Step 4: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the mouse and keyboard and then try to install the updates.
You can see the steps outlined in the article below, which deals with a similar question
Service pack Windows Vista and Windows Server 2008 install fails with error 0x80004005
Note: Steps to solve the problem of Windows Update for Windows 7 is valid for Windows Vista.
Thanks and greetings
Ajay KMicrosoft Answers Support Engineer
***************************************************************************
Visit our Microsoft answers feedback Forum and let us know what you think. -
I have a Sony Vaio SVE1113M1EB provided with pre-installed Windows 8. Yesterday, my laptop won't start and recovery tools did not work. Then I deleted the partitions in stock and tried to install Windows 8 on DVD. He said: "the product key entered is not one of the images available for installation windows." I wrote my product key. How to install Windows 8?
Original title: Installation of Windows 8
Hi Qadir,
The issue could be due to the supplied product key does not match the press which is used to install Windows. The product key that is provided can be a file without assistance, in a. EI. CFG file, in the PID.txt file or in the BIOS firmware. Windows OEM 8 machines ship with the product key in the firmware, and if this product key does not match the press, then you will see the above error message.
I suggest you to change the product key to the correct for the media you are trying to install. If the system has a product key in the motherboard (o. a. 3.0 [Activation OEM] provides an OEM product key in the firmware), you use an Unattend file, file (EI.cfg) edition Configuration or the product ID file (PID.txt).
You can check the link:
«Windows 8 or Windows Server 2012 installation may fail with the error message: the product key entered does not match any of the images available for installation Windows.» "Enter a different product key"
http://support.Microsoft.com/kb/2796988/en-us
I hope this helps. If you have any other questions, we will be happy to help you.
-
I'm running Windows7 and have attempted to download/install Windows 10. The Windows 10 download/install fails with error code 80200053. Troubleshooting Windows Update product unresolved error code 80070057. How should I proceed?
OT:
Installation of Windows 10
I think that this error has something to do with the Windows updates blocking antivirus.
Try this:
(1) disable the anti-virus and all others no essential programs
(2) type in services.msc RUN which will take you to the 'services' and search for Windows Installer mine has been set to manual so leave it put there and just start it
(3) now, run windows update and wait for your window installed correctly
(4) restart the computer
Let me know how it goes!
-
Muse update installation fails with the error: DW071 &; DW0003
Here is the Setup log error:
Exit code: 7 please see specific errors below for troubleshooting. For example, ERROR: DW003, DW071... - Summary - 0 fatal Error (s), 3 (s) - payload: dotNet 4.5 4.5.0.0 {B89609E0-1A98-11E5-9217-A35DB58AA028}---ERREUR: DW071: ERROR: DW003: payload of third party installer NDP452-KB2901907-x86-x64-AllOS-ENU.exe failed with exit code: ERROR-2145124329: cannot install .net framework.
I have already completed the installation of repair on all C++ applications and installed the dot net 4.6 update and restarted the computer.
Hi ,
Please, try the following steps:
- Uninstall Adobe CC of the machine (Creative Cloud help |) Uninstall the creative Office Cloud app)
- Set to "Full control" permissions on the files of Adobe for all users in the following locations:
- [System drive]: \Users\ [user name] \AppData\Local\
- [System drive]: \Program Files (x 86) \Common Files\
- Restart the computer.
- Install the application Adobe CC (Creative Cloud help |) Creative cloud for office)
Kind regards
Nicos
-
KB980182 installation fails with the error Code 80070057
OS: Windows 7 Home Premium x 64
After several attempts, I can't KB980182 to install through Windows Update or by downloading and running manually the. MSU. I am presented with the code 80070057 error whenever I try.
I also tried to restart my computer several times to get this to install without a bit of luck.
Is there a way to fix this without having to reinstall Windows as I saw suggested elsewhere?
Try this:
1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe
2. close all open applications (that is, anything with an icon on the taskbar).
3. After completing some you have a copy of your key of handy product, uninstall NIS 2009, LiveUpdate and all Norton Add ons via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).
4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.
NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!
5. right click on the file that you saved in step #1 above, and then select run as administrator. DO TAP not your keyboard until the race ends, then restart.
6. do a clean install of NIS 2010 using your product ID & reboot: http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN
TIP: Do not activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.
7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".
8 see if KB980182 now installs. If no joy, open a free support ASAP incident!
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
This question has been previously published, but doesn't seem to have not been resolved for my case. I have hired McAfee and they ran through their bag of tricks does not.
The upgrade of Vista 64 Ultimate 64 Windowns fails due to McAfee Personal Firewall. However, this application has been uninstalled and also used the McAfee product removal tool. The error continues.
I disabled all services at startup, which did not solve the problem.
I am looking for the specific trigger for this error. What you looking for Win 7? It is a specific registry entry?
Use the McAfee removal tool to remove it completely from your computer:
McAfee removal tool - uninstall of McAfee
Also search in Program Files and Program Files (x 86) for all McAfee files and delete them.
Also perform a clean boot:
-
Microsoft Office 2003 updates are installation failed with the error.
Unable to install the updates of Windows office 2003?
Original title: Windows update cannot install Office 2003 updates / I have Win XP Professional SP3. I am tired
Hello
-What is the error code that you get when you try to install updates?
-Is the specific question to the updates of Microsoft office?Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services
http://support.Microsoft.com/kb/906602You can also post your question under office forum if the problem is specific to the MS office updates.
-
OfficeJet 8600 installation fails with the error 25024
Had to replace a 8600 printer. Added the new device, but analysis wouldn't work on the second computer, nor the HP application would launch. Tried to reinstall the driver but it fails stating that he cannot remove the old device. In the case of the Viewer, it displays an error 25024. I tried to install from the CD & download. He has worked on the other computer, but this one may not remove or install correctly. I tried to run the scrubber v14 but who does not find a device and said has some files to remove, restart, attempt to install and always fails. The scrubber removes all entries in reg etc. and which is the right to use one?
Win7 64 bit
OfficeJet Pro 8600 - attached to the network (wired).
To start sounds like it is a driver problem. I want to start to be sure that deleting the software and relocation happened in the best way possible. I want you to follow my steps, I can be sure that we start both on the same page.
First of all, if you use a USB cable, be sure to remove it (it's important). Do not plug it in again until the software instructs you. Through devices and printers, programs and features and issues Device Manager and make sure that all copies, files, and programs related to the printer are removed. As indicated, and then restart the computer.
In the menu START menu type "%temp%" and press ENTER. Here, I want you to press Ctrl + A, and press DELETE. Some files you cannot delete them, ignore these files and delete the majority that allows it to.
find and install SOFTWARE to FEATURE FULL if it is available:
http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=4323659
Install and let me know the result!
Have a great day!
-Spencer
-
Vista Service Pack installation fails with the error.
I checked Windows update and every time he tried to install SP1, system failed, done everything suggested to & assistance and not yet able to download SP1 and SP2 cannot download until I have the first...
Original title: I want to install Vista Service Pack 2 but informed me that I don't have a VSP 1, when I try to download SP1 it tells me that I have an error, please can someone advise... Thank you
Try to download the SP directly on your computer first, then run. My apologies if that's what you hear in #3
http://www.Microsoft.com/en-US/Download/details.aspx?ID=30
I hope this helps. (Note: you can do the same thing with SP2)
-
Windows Update loops round and round constantly to not set up correctly, then restores the changes
Do I need to install the System Update Readiness Tool KB 947821?
Probably not: I had a lot of doubt that SP2 is installed if KB947821 has not already been installed.
Given that this problem is after a fairly recent install of SP2...
Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack <=pick this="">=pick> ).
In the case opposite & whereas KB971644 is NOT a security update, you can simply hide the "thing":
1. stop the automatic updates service:
Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
Double-click automatic updates > click stop
(Stopping the service will take a moment)2 remove the contents of the download folder:
Start > Right click on run , and then select run as administrator >
(type or copy/paste) %windir%\SoftwareDistribution > [OK]
Open the download folder and delete its content
Close the window.3 start | Control Panel | System maintenance and (if you use Classic view, skip this step). Windows Update | View the updates available (or Select the updates installed): right click on the (platform) update for Windows Vista (KB971644) | Click hide update | Confirm the prompt UAC (User Account Control), if any, & OK your way out.
4. start the automatic updates service:
Start > Right click on run , and then select run as administrator > services.msc (type) > [OK]
Double-click automatic updates > click Start
(Stopping the service will take a moment)=====================================
To restore/show updates for Vista: Start | Control Panel | System maintenance and (if you use Classic view, skip this step) | Windows Update | Restore hidden updates: Find and select the update you want to install. Click restore. You can now select once again it and install through the normal process.NB: If KB971644 were available for download/installation manual (and is not), I would have you try it.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Kb968211 installation fails with the error 8007371B code
I tried many solutions, but failed.
KB968211 is the media pack with WMP 12 for Win 7 N.
Hello
I tried this, but failed.
I downloaded the file again and again.
I have clean booted etc.
Now, I've used a lot of time, so I installed Win Ultimate (no N) with WMP.
Thanks in any case!
BR / Nils
-
Update for Windows Vista 64 b failed with the error: 80070005
Update windows 64B is now impossible because I see an error code 80070005. I tried to work on my admin account, but even who could not fix this update. On the internet, I've seen a lot of questions unanswerd (UAC) for a problem like this.
The following things could not solve the problem:- Tune up utilities
- Availability of system updates tool
- fix Microsoft (search for problems of sound and WV64 update)
Another problem maybe caused by the present is: there is no sound on the PC.
who knows the answer?The update works again! I downloaded everything manually. Thnx
-
vurial studio 2005 sp1 installation fails with the error of digital signature verification
Information system
Visual studio 2005 vere 8.0.5
Microsoft .net framework 2.0.50727 sp2
Micorsort viaual Web developer 2005
Microsoft windows xp professional 5.1.26 build 2600 sp3
WindowsInstaller3_1
Hi Bob,
Please go to the Microsoft Community Forums.This problem would be better suited to the MSDN Forums community.
Please visit the link below to find a community that will provide the support you want.
Maybe you are looking for
-
Before coming to my new place, I saved all my info like passwords, bookmarks etc in my old laptop and they sync with my Firefox sync account. But after that I came to my new place, I bought a new laptop. But when I signed into my account to synchroni
-
6477-r7u product, I can't find or get the internal hsdpa module to work any advice. I had a quick glance at the support site and many software available, but what's on the machine, this is what is available. And is this module locked to any provider
-
Dear all I have the project with DaNI robot and I have two questions: 1 - can you tell me please if it is possible to connect DaNi with host wireless? 2 - someone has some files recommend? Thanks and greetings
-
Broadcom 802.11n guard disconnection windows 7
My Dell vostro 3560 with windows 7 Professional can logout using the broadcom 802.11n wireless adapter. He did this three or four times a day. My laptop is 3 meters from the router, and all other wireless devices are connected. Sometimes reboot lapto
-
It is possible to specify a different directory URL service for a lobby phone?
Hello We have a 7841 configured as phone Hall. Now, we want to allow visitors to search Director of extensions only. I can create another directory server so that it contains only the extensions. But I'm not sure if we can specify different URLS for