Vista SP2 not allowing not Internet connection

Similar Questions

• Sharing works do not Internet connection

  OK im trying to make my computer vista laptop wireless for my xbox 360 and im struggling to try to leave Internet connection sharing when I go to propities and go to the sharing, I have the box that says allow other network users to connect through this computer's internet connection I click on it and click ok , then it opens with an error message indicating an error occurred while the connection was activated and it does never time I try and select it ive tried something different and looked online and can't find someone with the same problem or answers as to the difficulty that I even tried bridging the connections and it did not work im not sure if its because of my computer is connected to a router im trying to use my computer and wireless ICS were like this, it will only work if it was connected to the local network

  Hi rhawley64,

  Thanks for posting on the Microsoft answers Forums.

  Have you tried to connect your XBOX to your computer via a wired connection?

  1. first of all, have turned on your Xbox. Also have your PC on, because this next part is everything with the computer. It will probably work with a wired connection as well (but you could probably just hang to the top your modem or router then), but here it is. First go to start and go to your control panel. Switch to Classic view using the link in the upper left corner of the window. Find the network connections and open it.

  2. you should see a "connect to the Local network' (or disconnected, it's to connect to the Xbox) and your internet connection (mine is called"Wireless network connection"). Connect the Ethernet cable to your laptop and the back of the 360. Select the 'connection to the Local network. After it is connected, turn off your internet connection. Once it is disable right-click the internet connection, and then click Properties. Go to the Advanced tab and check "allow other users of the network to connect through this computer's internet connection". Allow that this ends, it may take a little bit. Once this is done, your internet connection should say shared next to the State of the connection.

  3. check your internet connection. Once it is fully connected, right-click to 'connect to the Local network' and click on repair. Allow only at the end. On your Xbox, find the system control panel and browse until you find 'connection to Xbox Live Test. Test the connection. If it works, congratulations, you don't need this next part. For some, at this stage, they get a DNS error. There are a number of ways to solve this problem.

  4. you must have a connection to a router. To browse the internet once again, you must disable the "connect to the Local network' and then to repair the Internet connection (follow the steps above to activate it again once you have finished). Go to http://192.168.0.1. You will be asked for a connection. On most routers, this is:

  User name: admin

  Password: (no password)

  If this does not work, look for the login information for your model of router. Once connected, you have to find where your server DNS IPs would be listed. On the top bar, click State. Under WAN, you should find DNS IPs. Manually enter them into your Xbox (rather than have it find automatically) and test your connection again. At this stage it should work. Any other error can be search online.

  After following the steps above you have established a wireless via your computer with your Xbox?

  Please post back and let us know if this information was useful to solve your problem or not, so that we can help you if necessary.

  Robyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Vista SP2 not recognizing not not SD card with the external drive

  I have a Dell PC running Vista SP2 32 bit, and I just bought a card reader IOGear (GFR204SD, USB key with slots for SD/MicroSD cards). With the help of one of my Android devices micro SDHC cards (both brand Sandisk 16GB, I have a Droid and a tablet of Sanyo), this USB drive will not be detected, but when I click on the icon that appears in my computer, it just says "Please insert disk into drive h:" even if the card is inserted. Cards read very well if I mount them by the smartphone, but not on this device. The IOGear online chat person was no help for me until my connection has been lost, and before I asked them once again, I thought I would see if it was a Vista problem.

  Every search I did shoot a lot Info for XP or SP1, but not to SP2. And in Device Manager there is no yellow triangle exclamation the device seems to settle but the card itself does not seem to be save.

  See this article if this can help:

  How to fix the error "Please insert a disk into the drive" in Windows
  http://www.troublefixers.com/how-to-fix-please-insert-a-disk-into-drive-error-in-Windows/

• CC sees not internet connection

  Hi, I can't open my CC apps as my CC does not see my internet connection, I get the error: "your computer seems to be offline. An Internet connection is required. If please connect to the Internet and try again. "I'm connected to the internet... This is a new problem, as he has worked for months, why it suddenly does not work?

  HidiPixi74, allows to try the solutions mentioned in the article below and check if that helps.

  http://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• WNDR3700 not internet connection due to the storm

  My modem to broadband ISP (ARRIS TM822) was killed during a storm, it was replaced with the same model, and at the beginning, when I plugged my router, the wireless worked well. I'm not in the settings or something, just plugged in, and it worked perfectly. However the next morning, I was unable to connect to the internet.

  I did a lot of troubleshooting:

  • Firstly, I fed all the way down, pulling cables, batteries on the modem, etc and started in sequence. This is done several times without success.
  
  
  • I updated the firmware on the router, done the commissioning, no luck
  
  
  • Connected on the router, using the routerlogin.net and run the configuration wizard. Got the message saying 'No Internet connection detected' ' Please check connection to the modem cable/DSL and of Internet WAN port.
  
  
  • Did a factory reset and used the resource CD. To the tab of preparation, got 'No adapter' ' is either disabled or no Ethernet card Ethernet card is installed on this computer...» "I've updated the driver for the LAN on my computer (it's something RealTek) and uninstalled and re-installed. Same result.
  
  
  • In addition, the port is very well. The LED indicator for the Ethernet port is shining green on the router and the computer, the port "lights" to show a good connection. It also works very well when it is connected directly to the modem.
  
  
  • The State of the computer shows LAN network data is sent and received when it is connected to the router, quite strangely, even if I can't connect to the internet.

  Thus, it has been a long and frustrating day. I'd appreciate help on solving this problem.

  Thanks in advance.

  Hi Elaine,.

  I couldn't make it work. I pretty well confirmed, however, it is the router. I tried another router and it works very well with the modem, and I had a friend check my router on its network. It did not work there either. I'll have to buy another.

  Maybe it was damaged during the storm that killed the modem. Just very strange that he worked for a while before stopping and that he was not completely killed as the modem, just maybe the internet port. Both have been connected to a surge protector as well! Maybe I can get compensation from the manufacturer. Well...

  Thank you for following it upwards.

• Linksys does not detect not internet connection.

  My linksys router hotspot does not detect my internet connection. My internet connection is clear. How would I fix this? Help, please.

  Hello

  You need to reset the Linksys router and then check if the problem persists.

  Note: you need to contact Linksys in order to reset the router.

  Hope this information helps.

• Vista 32 bit loses the internet connection after about 10-15 minutes.

  I lose my internet connection after 10-15 minutes.

  The message says local access only.

  The only way to reconnect is to restart the computer.

  I use a devolo home plug network system. It is connected to a 210 of BT router travel.

  I also have a new computer recently bought and installed Windows 7. There is no problem with that.

  Maybe it's a coincidence, but the problem started only since the installation of the new model.

  
  

  Hello Cody C.

  Thanks for your reply. I tried this. It is said that the drivers are up to date.

  I go into the settings of power network and checked the box "turn off network card to save energy.

  Since that seems to be OK. Only time will tell if.

  Thanks a lot for all the replies. EXTED

• Vista SP2 not provided in the updates

  I use Vista Ultimate SP1 of the initial installation.
  I noticed that SP2 is available for some time now.
  My question is - why has it not been downloaded by automatic updates.
  Does this mean that I have to download myself and hope _ as it installs OK. Seems that people have had a few problems with SP2 installed.
  Maybe better to leave it where it is.
  I can get some advice please.

  http://support.Microsoft.com/kb/947366/

  "How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues"

  Resolution 2 of the reading:

  Solution 2: Run the tool system update System Update tool checks your computer and trying to resolve certain conditions that could interfere with installing updates or other software. However, before you download the tool, you must determine whether your computer is running a 32-bit version or a 64 bit version of the Windows Vista operating system. If your computer is Windows Vista installed, and you know which version you are using, go to the section "how to download the system update readiness tool. If you are unsure which version your computer has installed, follow these steps:

  1. Click Start
     Collapse this includes this image

     

     .

  2. In the Search box, type system, and then click System in the programs list.

  The operating system is displayed as follows:

  • For a 32 - bit version operating system, 32-bit operating system appears for the system type under System.
  • For a 64 - bit version operating system, 64-bit operating system appears for the system type under System.

  After you determine which version of Windows Vista, your computer is running, download system update readiness tool. Mick Murphy - Microsoft partner

• Explorer freezes on Vista desktop, not internet explore

  I have Vista and Explorer keeps on freezing upwards and do respond no icons on the desktop.  The system recognizes the error and restart the explorer, but in a few minutes, it happens again.

  Hello

  Use the Secure Mode of as needed to solve problems - tap F8 repeatedly that you start.

  Use the startup clean and other methods to try to determine the cause of and eliminate
  the questions.

  ---------------------------------------------------------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Photosmart 5520: Not internet connection post update download

  5520 new. Connected to internet and downloaded straightup update. Now I get "server connection error... check the connection etc. This is done via the touchpad printer so the browser interface. Then... no ePrint or possible applications. Direct wireless for devices works fine.

  Could it be a corrupted download of update? Anyway to force a reinstall?

  Any thoughts?

  Let's define an external static IP and DNS address for the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• T61p not internet connection WiFi

  I have a T61p 6459 with an Intell Wireless WiFi Link 4965 AGN inside network adapter. It was working fine until the right signal strength for a few days when I would be connected to the network all of a sudden I would lose Internet access but then I always 100%. I have tried dissconnecting and that has not worked. Then I rebooted and it worked but only for a few hours, what is the same thing. Now, even with a reboot I have 100% signal strength, but no internet access.

  Help me please!

  Your wifi network adapter does not connect to internet, it only connects you to a local access point, usually a router, whose job it is to connect to the internet. Try to turn off your router for a minute or two, in fact completely the unplug, wait a minute and a plug it back in and then see if you can connect.

  If so, you can then focus on an update of the firmware of your router, if the problem persists.

• Wireless signal recognized but not internet connectivity: laptop HP 2000, model QE334UA, Windows 7

  I have a 2000 Notebook PC HP, Model # QE334UA, running Windows 7.  The wireless signal is showing all the bars at the bottom right, but I am unable connect wireless to what anyone (for example, any web browser, Outlook, Dropbox).  When you connect via a LAN, however, I have no problem.  Here are some details on what I tried:

  1.) this same problem occurs on all the networks I tried, even if the other computers are on these networks, is not a problem of router/modem.  Yet, I restarted those and nothing helped.

  Rebooted 2.) the computer.

  3.) done a system restore.

  4.) checked IPV4 settings make sure IP & DNS server addresses are configured to automatically get.

  5.) turned on and off the wireless on the keyboard button.

  6.) as gone with the Device Manager and press update driver software for all network adapters.

  7.) deactivated and reactivated all NICs.

  I have read many other forums - than where I got these ideas- and it seems a common problem, but I could not find an answer that works.  I'm not too technically savvy, so maybe I'm missing something, but any help would be LARGELY APPRECIATED, especially because my warranty just expired.

  Thank you

  Zack

  I have it!  It turns out that my SonicWall VPN has been the origin of the problem.  Thank you!

• Vista SP2 not success to install

  In the middle of a specified when installing SP2, and then in the dialog box said no success and detail is Error:ERROR_INVALID_DATA (0x8007000d)

  and I follow the sulotion to help support until the solution 4 uninstall anti-virus program. its can not succeed.

  What should I do, please help and suggestion

  Thank you

  Bill

  Hi Beepal,

  Please follow the steps below to install SP2 successfully on your computer:

  http://support.Microsoft.com/kb/947366

  Answer about the State of the question.

  Thank you

  Marnie.

• Vista to Windows 7 - no internet connection - "the remote device or resource accepts the connection.

  After the form of Vista to Windows 7, the office is connected to the network but cannot connect to the internet. All firewalls are disabled. The other pc on the network works well. I get the message "the remote device or resource accepts the connection.

  There's a way easier than Cody (do not hit you m8, but sometimes things can be simpler)

  Click on start/Control Panel/internet options/connections/LAN. Most likely your proxy is checked. Uncheck it and then reopen internet Explorer. Sounds like your proxy settings are on. I hope this helps.

• Homestead sitebuilder does not see internet connection under Windows Vista

  Recently, I switched from Verizon internet home (very bad product) Qwest's high-speed wireless. No problem. However, I discovered that I have a problem with vista.

  First of all, microsoft updates would not download at all. I eliminated the firewall and done everything I could think and one day (had vista sp 1...) Yes, only had not updated in a while) it switched to automatic updates. Then it worked fine.

  My second problem is with my website building program. It is not the internet connection. If I have power of Attorney, the internet connection test is fine. I have no problem with my internet. I can get online every time that and fast. However, it is curious that my homestead sitebuilder program does not recognize. So I uninstalled the sitebuilder and tried to reinstall a clean install. The installation wizard starts and installs the first part, I hit then, and suddenly, I get a message error "Sitebuilder has stopped working; try to find a solution", in which he can never find the solution. So, I go to the site of the farm and download the zip file. I am able to install sitebuilder by these means, but then it takes forever to load on vista and never find the internet connection.

  Someone at - it solutions? It is a program that I use quite often and now I can only update online that allows me a limited capacity. BTW... I use firefox for my browser. Homestead accepts only the browser.

  Solutions?

  Hello

  You may need to contact the support for the site builder from homestead to reinstall.

  Also contact Qwest High Speed Internet connection to inquire the matter with an Internet connection.