Vista stuck on stop for more than 24 hours
Hello friends, I need help. I have windows vista professional, 2 GB of RAM, processor intel core 2 duo T7100. It was working fine until this morning I pushed the button install updates and shut down. I haven't had is long enough, so there are 15 updates. But still, I expected that it will take a little lonnger and install it and restart it. Then I pulled out of the House and came back after 5-6 hours, the display shows closing. Then, after 24 hours, show same thing. What should I do without a system Crash?
Hello friends, I need help. I have windows vista professional, 2 GB of RAM, processor intel core 2 duo T7100. It was working fine until this morning I pushed the button install updates and shut down. I haven't had is long enough, so there are 15 updates. But still, I expected that it will take a little lonnger and install it and restart it. Then I pulled out of the House and came back after 5-6 hours, the display shows closing. Then, after 24 hours, show same thing. What should I do without a system Crash?
I wouldn't be a big deal, if you're not the other problems as well. You were probably a few glitch software internal minor who hung your PC.
Tags: Windows
Similar Questions
-
I opened Adobe Creative Cloud installation Center and he asked me to update. What does that mean? And then I pressed the update, and it's been sitting at 2% for one hour now with no sign of progress. Is it possible to restart that process, because there is no getting out acess. I keep close the CC and when I open it again, it is still at 2%. I'm not yet of any recommnedations online.
I have a perfect home reception, so this isn't the problem. I have AI, Id, Lr, Pr, Fl, Ps and DW installed on my computer, but now I need to Encoder Adobe CC and I'm stuck waiting for the application Adobe CC for the installation of these stop smoking gel on me. Any help?
Thank you. Rachel.
Rachel, what version of operating system do you use? Try the below mentioned steps and let us know if it works.
1. close the creative process Cloud (cloud of Creative, coresync)
2. remove the cloud creative app - https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html
3. install Creative Cloud app - https://helpx.adobe.com/creative-cloud/help/install-apps.html
Waiting for your response.
Atul_Saini
-
Introduction to iCloud but "glued" for more than 12 hours
I am new to icloud and try to put up my pictures in icloud.
in the Photos on my imac, he says it's "uploading 11 983 points", but he's been stuck like that for more than 12 hours.
If I click on icloud in system preferences, it is also stuck and will not let me click on anything whatsoever.
What should I do now?
The first part in the photos is not uncommon, the initial download may take days and seems to stall for long periods of time. The second part on the system preferences is unusual, have you tried to restart the Mac yet.
-
CHKDSK stage 5 of 5 to 18% for more than 4 hours; Windows Vista
Help! CHKDSK has been checking the free space (step 5 of 5) for more than 4 hours. 18% full; 1996500 32228329 free clusters dealt with.
Steps 1-3 fine. Step 4 replaced bad clusters in 5 files. I have a Toshiba laptop with Windows Vista.Hi jacq_a,
Please take a look at the advice given by spirit X in the following thread:
-
Windows Update is stuck on the screen check updates for more than an hour.
Original title: Windows Update problems
I just got a new update for Windows 7 and got all my drivers installed. However, Windows Update is stuck on the screen check updates for more than an hour. Everything works except that, and I don't know how to fix it. It has updated two things: the Windows Update Agent 7.6.7600.320 and update for Windows (KB958488). He continues to seek constantly and never find anything.
Please leave for 5 or 6 hours and if he doesn't find anything:
Please run the Windows Update Troubleshooter:
http://go.Microsoft.com/?linkid=9830262Please provide details of any problem it reports as not fixed.
-
I upgraded from Vista home premium to Windows 7, you use an Acer upgrade pack, I have an Acer 6935 G. Yesterday, the upgrade is stuck at 18% during the 'gathering of the programs and setting files. I left it overnight to see it was still on the same section but had reached 88 percent. Its now been stuck at this point at least 10 hours (do not know where it has reached this point last night so it could be longer than 10 hours).
I am a novice with computers so don't want to stop the upgrade to halfway through, I do not know the consequences could be, but what I can do? THE SUMMER IS GOING FOR MORE THAN 24 HOURS! He could go to 24 others. I tried to get on the Microsoft technical support, but my product key was not recognized? and it would have cost £47 to pay for the support!
It's very frustrating, I am at my wits end but I can't find any help for this specific problem.
Thanks for the help everyone, has been flooded with tips, really very good to everyone.
In frustration, I opened and closed the CD tray with instantly invites him to work again. If someone falls on a similar problem, they might try the trick that the laity were to formulate itself despite dark and sincere call for help.
-
I've used icloud to transfer old 4 sec to 6 sec new phone but then tried to use the itunes backup. It has been run for more than 24 hours and seems to be stuck. Should I unplug the computer and stop the process?
a bit of luck with your 6s still?
-
10.11.5 was their stall for more than 2 hours, is it possible to cancel install
10.11.5 on MacBook Air installation it worked for more than two hours, anyway to stop installing?
Try to shut down the computer using the switch and restart. This may cause the installation ends.
-
Laptop is blocked at the installation of 10 out of 17 Updtes for more than three hours
Laptop last night quit unexpectedly. This morning when I started the machine, it was locked to the installation of 10 of the 17 updates for more than three hours. I tried to turn off the machine, but I still get the same message. How do I get this at the end to restart properly
Hello1. remember you number updates that have been installed?First check to see if there are external devices attached to the computer, if so remove and check.
Method 1.
Let us run repair system at this stage, it might solve the problem.
See the following articles for additional help and steps on startup repair.
Startup Repair
http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair
What are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
Method 2.
If the bows persists please verify if you are able to boot safe mode.Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-modeTroubleshooting in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-modeIf the problem exists not in Mode safe run mode startup minimum troubleshooting to find the root cause of the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.Method 3.I recommend you to restore system using a Windows 7 DVD.Here's how:
To open the Options menu system recovery using a system repair disc or a Windows 7 installation disc
If your system is damaged and cannot access the menu system on your computer Recovery Options, you can access it using the Windows 7 installation disc or a system repair disc previously.
To use this method, you need to restart (boot) your computer using the disk.
a. Insert the disc.
b. restart your computer using the power button on the computer.
c. If prompted, press any key to start Windows from the installation disc.
o If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer.
d. choose your language settings, and then click Next.
e. If you are using the Windows installation disc, click on repair your computer.
f. Select the Windows installation you want to repair, and then click Next.
g. in the System Recovery Options menu, click a tool to open it and then choose the system restore and check.
If we are able to boot to the desktop now, I would ask you install the updates one by one andcheck the update is at the origin of the conflict.I hope this helps.Kind regards
Support Microsoft Savan- -
I installed the service pack and when the computer restarted message "service pack do not have. restoration of the changes. "came and slept there. I tried to turn off computer and start in safe mode, but nothing helped. Has been ongoing for more than 12 hours and no change. Any ideas? Thank you
Hello
You can try this:
the link below is how to download and get a vista disk startup repair, which you can start from the
http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/
Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below
http://www.bleepingcomputer.com/tutorials/tutorial148.html
to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start
It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu
Change boot order it do dvd drive 1st in the boot order
-
For more than 24 hours running Startup Repair
I recently installed the Win 7 64 bit on my pc nine girls.
Unfortunately, I installed on a motherboard, I had to change. One did not support the RAM I have.
Then I installed the new ASUS mainboard and started.
Everything seemed to go well after loading some new drivers.
But now the pc always very briefly see a blue screen at startup then suggesting safe mode or the Startup Repair.
The startup repair works now for more than 24 hours and that the current repair must not be abandoned. I'm considereing to close and restart and reinstall win 7, but it is a long process, install all software. What's your tip?
O' race he could problems drivers bee due to be installed on the motherboard first.Stop and do a clean install of Windows 7. You can do anything else. Make sure you have Win7 64-bit available drivers for all your hardware first. MS - MVP - Elephant Boy computers - don't panic!
-
I tried to erase and reset my iphone 6 s. But why is it taking so long? For more than 24 hours. Is this normal? The phone displays just the apple logo and wont open. Help, please. Thank you in advance.
Hello
Follow the instructions here:
If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports
-
A frozen (for more than an hour) when installing Win7 updates
During the installation of updates during a restart, IQ506 froze, although few 'circle' still rotating, for more than an hour so far. Message says not to put off, but nothing happens. Where should I go from here, if I am not in power down?
A few times just to give up and put off, I look at the HD indicator, if it goes 30 minutes without blinking I give him a strong power off, if the HD is flashing I will usually let it run all night
-
No access to hotmail for more than 24 hours. Said they do maintenance and should not be more than an hour. Before be bleached, I had 9 unread messages, now when I sign it shows 0 next to the hotmail tab. What can I do? Nowhere to get after spending hours trying to find Hotmail and send requests on their forum.
Submit all Live and Hotmail queries on the forum right here:
Windows Live Solution Center
http://windowslivehelp.com/ -
Error message - I have a 15MB email sitting in my Outbox. How can I remove it because they say, it is already transmitting... He passed for more than 24 hours
Error message - I have a 15MB email sitting in my Outbox. How can I remove it because they say, it is already transmitting... He passed for more than 24 hours
No guarantee.
Open Windows Mail > file > work Offlone.
See if you can now delete.t-4-2
Maybe you are looking for
-
Equium A100-027: Audible 'slip' in his o/p when the SRS is enabled
For users who use Band-In-A-Box, I found the accentuation of the sound (SRS) creates unacceptable noise (almost a "" hissing) when you use BB - and is especially noticeable at the intro to songs.Rendering of songs produce the same symptoms and I foun
-
Y at - it a Mac OS version of the XPS Pro-100 driver?
-
I tried to update but received this error: Code FFFFFFFE, what should I do?
I tried to update but received this error: Code FFFFFFFE What should I do? What does that mean? THANK YOU VERY MUCH FOR YOUR HELP! : D -L
-
A T500 driver setup guide anywhere?
Hello I was wondering if perhaps it was a guide out there on the net to learn how to configure its T500 correctly after a fresh install of the OS. I followed initially one for the T61 (with corresponding T500 drivers) of notebookreview.com, but I did
-
Photosmart B110 on wireless network. Queue Mac returns to 'break '.
I installed a Photosmart B110 on the network of the company through the printer wireless. Received the message "Congratulations" OK. I set up my MacBook Pro OS 10.5.8 to WiFi connection to the IP address of network, which is already used to access