Vista the specified domain does not exist or could not be contacted
Hello
Hello
you restart and press F11 to start the process of restoring HP
and follow the instructions from HP
Tags: Windows
Similar Questions
-
The specified domain does not exist or could not be contacted.
Last night I completely disconnected my laptop. This morning when I turned on the machine, she does everything as planned. When I reached the screen that requires a password to connect to Windows, the following error message came after I saw that my password and press ENTER.
The specified domain does not exist or could not be contacted.
I use Windows Vista Ultimate and the laptop connected to a wireless router.
I tried to restart and stop several times. It did not work. I did a Diagnostic Windows memory check and it went well. Also, I restarted Windows in Safe Mode and some other modes and received the same exact error message.
Thanks in advance for your answers!
Dan
Hello1. don't you make changes before the show?
2. is the laptop connected to a domain or have you tried to connect to a domain?
3. you have to any other user account on the laptop?If you have any other user account on the laptop, try logging in there and see if the problem still occurs. If you are able to connect, sever the computer from the domain. Try the following steps to separate the field.
1. right click on computer from the start menu, click Properties, click Advanced system settings, the computer name, change, select workgroup and workgroup name type. Click Ok. You will need the necessary permissions to perform this task.
If the computer is not connected to a domain and you have not made any changes recently. Try to restore the system using Vista DVD.
To run the restore of the system using Vista DVD, try the following steps.
1. start in Vista installation DVD.
2. choose your language settings, and click Next.
3. click on repair your computer.
4. choose your operating system and click Next. This should bring up the System Recovery Options.
5. click on system restore.
6. follow the instructions in the wizard to complete the task.
7. once the system restore is complete, start the computer as usual and try to connect.For more information on the Windows recovery environment options, see this link:
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-VistaTry the steps and post back with the results, so that we can help you further.Kind regards
Syed
Answers from Microsoft supports the engineer. -
"The specified domain does not exist or could not be contacted" then tried to connect to Windows
Original title: could not open a session after computer F8\Repair selection
Running Vista Home Prem
Dell Inspiron 1501
No Cd MFG.
I have recently been struck by application pretty nasty virus/malware and want to do a factory restore. The problem I have is that when I select the option to repair through F8 at startup I get to the logon screen and all it shows is 'another user' in the way witness name of user/pass fields.
I tried every possible user and the user/pass combo I could find and think. Every time I have enter a value in these fields and try to connect, I get the message "the specified domain does not exist or could not be contacted", if I try to log in without putting information in the field I get a msg of windows security saying that I have a user/pass to open a session.
I looked in all possible aspects of user accnts, changed the need to open a session, deleted all passes, gave full control to all parts of windows and I still get the same screen.
I need to know if there is a way around this or if the virus has changed the aperture setting of session for the repair operation? Also, if someone could tell me what measures the system and what files it loads when you browse the F8 repair op.
Anything you could tell me would greatly
Thank you
Running Vista Home Prem
Dell Inspiron 1501
No Cd MFG.
I have recently been struck by application pretty nasty virus/malware and want to do a factory restore. The problem I have is that when I select the option to repair through F8 at startup I get to the logon screen and all it shows is 'another user' in the way witness name of user/pass fields.
I tried every possible user and the user/pass combo I could find and think. Every time I have enter a value in these fields and try to connect, I get the message "the specified domain does not exist or could not be contacted", if I try to log in without putting information in the field I get a msg of windows security saying that I have a user/pass to open a session.
I looked in all possible aspects of user accnts, changed the need to open a session, deleted all passes, gave full control to all parts of windows and I still get the same screen.
I need to know if there is a way around this or if the virus has changed the aperture setting of session for the repair operation? Also, if someone could tell me what measures the system and what files it loads when you browse the F8 repair op.
Anything you could tell me would greatly
Thank you
Hey
link below has the dell way they do a reinstall of recovery
If you continue to have problems with it contact dell
There is also a support link for dell at this link of recovery
It's their recovery process
Walter, the time zone traveller
-
using several Windows 2003 domain in an attempt to push the msi using Group Policy is following on xp sp3 machine error
Group Policy infrastructure failed due to the error below.
The specified domain does not exist or could not be contacted.Note: Due to the GP Core failure, no other component processes Group Policy policy. Consequently, status information for the other components are not available.
Hello
Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Technet Windows Forums. Here is the link:
http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads -
Computer disconnects error the specified domain does not exist or could not be contacted
Original title: Vista connection problem
Using Vista, I can not connect. It does give me an option of safe mode. When you start in normal mode, it just runs and runs but does not charge. When I use the repair option which brings me to a login screen, but not my normal connection, he says any other user. Any user or password that I use, I get the following message: "the specified domain either does not exist or could not be contacted.
Hello
· You will remember to do recent changes on the computer before this problem?
· Your computer is on the network?
· What is the exact message that you get in what concerns the "other user"?
I suggest you follow the steps below:
Method 1:
Restart the computer in safe mode controls the State of the question. Let us know the results. Follow the steps from the link to the following article to find out how to start the computer in safe mode:
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Method 2:
If the problem occurred recently then I would suggest allows you to perform a system restore from winre mode at a time where everything worked well. Follow the steps in the link:
-
Receives the Message "the specified domain does not exist or could not be contacted" when starting
I was working on my machine, normally the day before and I shut it down properly - everything was fine. I'm confused as to what happened between the stopping and starting of the next day!
After you receive this message, he asks me my password for the account of one on my machine. I've never set up a password.
I have tried rebooting several times and it gives me the same message.
I started to run diagnostics, but he appeared to get hooked on a memory test.
Any ideas on how to pass this message/fix, it would be appreciated!
Your system appears to have been related to a field. After that, it requires a reboot to take effect. Once you restarted so he invites to connect to the domain.
There are always local accounts on your computer that allows you to open a session, but they will have a password for all accounts if your system is connected to a domain (as it is a requirement). To log on by using a local account, choose the name of your computer in the ' log on: "drop-down at the login prompt. You will need to know the valid username and password for this computer. If you or someone you know has an account in the domain that is joined to your system, allow you to logon to the domain by providing the valid domain user name and password.
Once logged on you can undo your computer from the domain (right click on the computer in the start menu, properties, advanced system settings, change the computer name, select workgroup and type workgroup name. Click Ok.) You will need the necessary permissions to perform this task.
If you are unable to go further, because you don't have a valid login, you can reinstall Windows. If you format your drive when you re-install you will lose all data on this disc. So if you need all the files from the drive, and you go this route, make a backup first!
-
Windows XP the specified domain does not exist or could not be contacted
I think that as long as XP has been around, Microsoft would have found a solution to this problem.
Everything I've found don't do me no good, because I can't cross the password prompt. Is normal
or safe mode. What am I supposed to do? I can't afford a new computer, so in the meantime I'm without my main
computer.
Some relevant information would be useful.
Thank you
Larry
Hello
I suggest you to follow the steps in this link and check if it helps:
http://support.Microsoft.com/kb/307545
It will be useful.
-
The specified service does not exist as an installed service
Recently I seem to have problem with every thing in my laptop under windows vistas. When I try to open any program such as device 1 Manager) 2) install/uninstall any program 3) manage computer 4) remove a printer, etc., it gives only the error "the specified service does not exist as an installed service. I am unable to set something good with my computer. the system tray has the error "The Audio Service is not running". The windows update is on and its updates up to today date from the. I can't even install the 'Active X' in IE8.
Even when I open MS office like word or execl program opens a file, but it takes 5 minutes to get active average as it opens, it gets busy. We can open other programs, but not MS office program.Good advice to set this right. Thank you and best regards.
Hi Dilippatel,
A. when it last work very well?
B. recent changes made on your computer?
C. who is the manufacturer of your computer?Try the following steps.
Step 1 : clean boot
A clean boot helps eliminate software conflicts. Let us check if software is causing the problem by following the clean boot procedure. To perform the clean boot procedure, follow the instructions in the link below.
1: perform a clean boot
2: enable half the services
3: determine whether the problem returns
4: enable half of the startup items
5: determine whether the problem returns
6: solve the problem
7: reset the computer to start as usualHow to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135After reviewing the issue, put the computer into Normal mode. Uninstall or update the program that is causing the problem.
Step 2:
1. click on start.
2. type regedit in the search box start and press to enter.
3. navigate to the location:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Class\ {4D36E967-E325-11CE-BBBFC1-08002BE10318}4 remove the LowerFilters value in the right panel. (NOTE: under the key, it)
are also some sub keys for example 0000, 0001. Please, double click it and remove the
LowerFilters value.)5 restart the computer and check if the problem persists.
Important this article contains information about how to edit the registry. Make sure that you back up the registry before you edit it. Make sure you know how to restore the registry if a problem occurs. For more information about how to back up, restore, and modify the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows
Try these steps and let us know the result.
Please post you rquestion in the discussion group of the Office for issues related to Microsoft Office.
http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspxBindu S - Microsoft Support
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]
-
When I try to change the networking of sharing and discovery, I get the above message. I don't quite know what to try to fix the problem. Any thoughts would be helpful. Thanks in advance.
Hello MarkPogue,
Thank you for the question!
I'm sorry to know that have problems you with the network sharing and discovery. "As I understand it, you get an error message" the specified service does not exist as an installed service ' trying to turn on network discovery.
Make the SFC (System File Checker) scan and see if the problem occurs.
Answer to us if you are having problems with the network discovery or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.
Good day!
Hope this information helps.
-
Impossible to share file error: the specified service does not exist as an installed service
Original title: Impossible to share a folder in Vista
I have Vista Home Basic 2007 with service pack 1. My software provider tries to share a file on the network and is unable to do so and has no solution. The error message is something like "not several points endpoint available.»
Also in the network and sharing Center I am unable to turn on network discovery, turn on file sharing, enable printer sharing. The error message is: "the specified service does not exist as an installed service."
What is the solution? Advisor. Thank you
Hello MC2882,
Please see the following article for more information on the replacement of Microsoft software, or contact the manufacturer of your computer: -
I get a message saying "the specified service does not exist as an installed service."
Hi, im having problems with windows vista where whenever I try to update my system (security, java, adobe) or I right click on the sound icon in the toolbar of my screen (and open) section, I get the message saying that the specified service does not exist as an installed service. SO, I searched online and which did not help. Oh and by the way, when I get the options after I have right click on the sound icon, I can't click on the mixer. IM using a dell inspiron 531 and it works on windows vista and is very slow, almost never answers (only restores the games that I have on it) and has an athlon processor. What should I do? Thank you, Shawn White. P.S. that's in the good topic?
Hello
1. you remember to make changes to the computer before this problem?
2. what anti-virus is installed on the computer?
Follow these methods
Method 1: A Microsoft Safety scanner to make sure that the computer is free from virus infection:
http://www.Microsoft.com/security/scanner/en-us/default.aspxNote: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.Method 2: Run the fixit in the following Microsoft article and check if it works.
Solve problems with programs that cannot be installed or uninstalled:
http://support.Microsoft.com/mats/Program_Install_and_Uninstall/
Method 3: Run a file system check Scan (scan SFC)
Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:
a. open an elevated command prompt. To do this, click Start, click principally madeprograms, Accessories, right-click guest, and then click run as administrator.
If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
b. type the following command and press ENTER:
sfc/scannowThe sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
Merthod 4: Check services.
Check if a service is stopped or disabled. You will need to check each service one by one. If you find any service is stopped or disabled, you must start or enable and check if the problem persists.
-
My computer was slow, so I tried to scan all using Windows Defender, and this error message keeps popping up, "the specified service does not exist as an installed device (error Code: 0 x 80070424) I don't know how fx this.» I' of love too see if there is another reliable computer, free softwear that can scan and virus scanning spywear.
Hello
Windows Defender is an antispyware software, not an Antivirus.
If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.
There is nothing to worry.
Using both programs at the same time can cause system conflicts, etc.
If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):
"Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.
Right click and select Properties , ensure that Startup Type is automatic.
Once modified, click apply and OK.
Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"
.
And for now, change startup Vista programs without using Defender, use one of these methods:
"How to use MSCONFIG in Windows Vista"
http://netsquirrel.com/Msconfig/msconfig_vista.html
Or the program Autoruns for FREE:
"V11.21 Autoruns for Windows"
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
And try this method for the analysis of Malware
Scan of Malware in Safe Mode with network.
http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
Once in Safe Mode with network, download and run RKill.
RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.
http://www.bleepingcomputer.com/download/rkill/
Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:
http://www.Malwarebytes.org/products/malwarebytes_free
See you soon.
-
Hello
Somehow, I lost all my windows games. I have Windows Vista Home Premium; Internet Exployer 9 & Service Pack 2. I don't know if you need any information Add ' l to answer my question. But if anyone can help me, I'll be very grateful.
I'm not at all computer literate. So if you answer me, please give me for exact directions.
I already watched: Control Panel; Programs of devices &; and the box is checked for the 'games '. I also clicked on the word 'Games' and all games can up and they are all checked.
When I try to access the games, I get this message:
C:\Program Files\Microsoft Games\Minesweeper (I got just to click on this game) \Minesweeper.exe the specified path does not exist. Check the path and try again. (But I don't know how to check the path! Can someone help me?
Thank you, b.
C:\Program Files\Microsoft Games\Minesweeper (I got just to click on this game) \Minesweeper.exe the specified path does not exist. Check the path and try again.
What do you get the message above? You try to put a tick in the box empty for Minesweeper in Windows turn features on or off?
If you uncheck the box for games, click OK, restart your PC, then check the box for games, press OK and restart again, what happens?
Is it one bought for PC & that you own, or is it a PC belonging to the company?
-
C7280 Installation error: the specified service does not exist as an installed service
All,
I have an AIO C7280 printer that is connected wireless to my router. I have a pc (Vista) cable and a laptop wireless (XP) connected to the router as well. I have no impression of question from the pc. However, when I try to install the driver on the laptop I get an error just after that he asked me if it's a USB drive or a network printer. I chose the network and the error appears saying "the specified service does not exist as an installed service. I ping the printer from the laptop so I know it can 'see '. I don't know what to do. I have uninstalled/reinstalled several times without success. Can anyone help?
Thank you.
Edit for more information:
After building a log of installation failure and 'details', that's what I see:
Error Situation code: 20364041
Now Launching = X:\hpzdui01.exe - gateoncmdline easyinstall | XXX f X:\hpoins21.dat-valider No.
LaunchNetworkInstall retrieves the value unexpected 1060
RUN: 50 return stops Driver UI plugin
Exit code = 50
Message edited by gatorman on 09/18/2009 16:57Message edited by gatorman on 09/18/2009 17:10The service that the error message refers is the HP network devices support service. Try this...
Open the contents of the installation CD, and then open the file "setup." Now you will find either a folder named 'netdevicemanager' or simply 'network '. Open if it is present. Now there should be a file with the same name as the file, but with extension .msi. Right-click on this file and click on uninstall. If you get a message stating that the action applies only to products that have been installed, and then click OK. Restart the computer IF necessary. Now, right-click on the file and click on install. Installation do not normally present a window of 'success' You will just see a bar of progress for a few seconds and disappear. Once this happens, restart the PC and check if the HP Network Device Support or similar service appeared in the list of services. If Yes, then reinstall the software, and it should install correctly.
-
I tried to turn on my Windows Firewall because they all stopped working for some reason any
& When I tried turning on setting recommended my tittes name appears. PLEAS HELP
The specified service does not exist as an installed service. (Error Code: 0 x 80070424)
I tried to turn on my Windows Firewall because they all stopped working for some reason any
& When I tried turning on setting recommended my tittes name appears. PLEAS HELP
The specified service does not exist as an installed service. (Error Code: 0 x 80070424)
The name of your what appears?
Error 0 x 80070424 See: http://support.microsoft.com/kb/968002
Maybe you are looking for
-
Unable to find the file userChrome.css customization of Firefox. I just installed 20.0.1 version of the Firefox browser.I want to disable/remove the navigation bar of the browser window, making the browser works like the kiosk mode. Help, please Than
-
Having a problem syncing the contacts list on my iMac to my iPad. The iCloud Mail synchronizes well. Cannot find anything on the settings of the iPad that synchronizes contacts. Thanks for any info.
-
Updateing problem on internet time
Hi all I'm trying to update the time on the controller from a website NTP stratum 2 PXI real-time. There are two methods offered by EITHER: Method 1 - Driver for PXI (LV > = 2009) Method 2 - Code based The example of function code (which works well)
-
Torrent video plays fine in Windows Media Player, but only audio in Windows Movie Maker?
I downloaded a video torrent on my Windows Vista laptop. When I went to play in Windows Media Player, it works fine. However, when I try to play it on Windows Movie Maker, I can place only the file in the audio section / music, even if it is listed a
-
Separated from this thread. I started to have exactly the same problem yesterday (20/10/2014)! Just cranking up my office is 25 minutes. Saving mode that I can work at least to some extend and performance is much better, even if the startup is still