Vista to Windows 7 Upgrade not activate when it is installed on the bare machine

Similar Questions

• Windows 7 will not activate after a clean install and several improvements to my computer.

  I bought a copy of Windows 7 Home Premium 64-bit.  I installed my old hardware running, but found Windows 7 either too many resources.  When there was enough money kicking around to upgrade my computer a few months later I did (new card mother cpu and ram).  Windows 7 would not start normally or in safe mode, my old installation of XP would not boot normally but would start in safe mode.  So I reinstalled Windows 7 with a clean install (reformatted my hard drive) and it works fine but now it won't turn on!  It says that I have to type in a different product key because I typed the product key cannot be used to activate Windows on my computer.

  I understand the need to fight against piracy, but the thought that I can't upgrade my computer without having to buy another product key is ridiculous!  There are solutions to this problem?

  Activate manually.  It is detect your previous installation and seeing this as an attempt to install the product on another computer.  It is a common phenomenon.

  To activate manually, go to start, search, and type in slui 4 enter.  Enter your country and press Next.  You will be on a screen with a phone number and a bunch of codes below.  Dial the number and browse automatic guests until you get to a human being.  Have your handy product code because it will be asked.  Explain the situation, but it's the same PC and only installed on this PC.  They should give you a code to enter on this screen to activate the operating system.

  I hope this helps.

  Good luck!

  If this does not work (these procedures are for Vista, but I guess they will work with Windows7), and then republish your questiion in Windows7 Forums:http://social.answers.microsoft.com/Forums/en-US/w7install/threads where they can provide the procedure for this OS if it is different.

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Dreamweaver does not start when it is installed on the second disk

  Hello

  I recently installed Dreamweaver (trial version) on a second drive through creative cloud Manager.

  When I clicked on DW in the started program start, but got stuck.

  I tried to go in the installed folder and double click on DW, but it's the same thing.

  Then I clicked on DW to create Cloud manager and DW loaded without any problems.

  So why the program only started compared to the creative clouds?

  Platform: Windows 10

  Adobe Dreamweaver CC 2015

  Thanks in advance for any help.

  Thanks for all the help.

  I installed Dreamweaver on a second drive to save space on my SSD.

  I realized Cloud Creative manager to install on the second hard drive.

  After making that Dreamweaver is not started, I restarted my computer, and then everything has worked.

• Windows 10 - ADE not detected when I download books from the public library

  Since installing Windows 10 and 4.5 of the ADE, when I download a book in a public library it just downloads the file to some directory .epub I chose.  To get it in ADE, I have to go through the "Add to library" function in the ADE.

  That's fine, but ADE does not recognize it as a borrowed book, so I can't return it when I finished it.  I approach the maximum number of books I have checked with my local library because these books will not be returned.  Apparently, I have to wait for them has expired.

  Ideas?

  Well, I got the answer today at our local library.

  Books, that I was just downloading was be books "Open EPUB", which means they have no DRM protection.  I can keep them as long as I want.

  An unexpected consequence of these 'loans' is that there is no way to return the books before their expiration date, so that they are based on my library account, running the number of books I checked.  The librarian told me that if I really need to send back them at the beginning so I can consult books more I could send a request it and it can return manually.

  Problem solved.

• Suite Microsoft Office 2001 will not open when it is installed on the new computer - Data Execution Prevention.

  I have a new computer and installed the Microsoft Office 2001 Suite of disks provided with my old.  It seemed to install correctly but does not open.  Message says Microsoft Office Suite has stopped working - Data Execution Prevention - and when I change the DEP settings it still does not.  Why, and what I can do to fix the problem?

  http://www.Microsoft.com/Office/Community/en-us/flyoutoverview.mspx

  Office newsgroups

  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Office.misc&lang=en&CR=us

  Discussions of general issues of the Office.

  They will help you with your office questions in the newsgroups Office above.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows 7 will not activate reinstall after Asus M3A Council.

  Recently, I did a reinstall of costs of upgrading windows 7 on an Asus M3A mother card.  When I tried to do the validation, it is not accepted.   This license from a windows 7 upgrade kit 3pk @ Walmart I bought shortly after the release of windows 7.  I had no problem with the original installation but having moved and the system being stored for about 2 years, I thought I would clean the system with a new facility.  This update was conducted from Windows XP that was originally installed on the card.  I've updated the processor, memory and bios over the years.   I do a reinstall once before long after the upgrade and had a similar problem.  In this case, I had to go back to older BIOS and CPU that was in the system when I did the initial upgrade.  I took some of the old avalible yet bios from Asus but do not have the original CPU.   Attached are the results of the windows validation tool.   Any ideas?   I also tried the route to reinstall windows XP by using the original XP license and then done installing windows 7.  No luck.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Validation caching Code online: n/a, hr = 0xc004f012
  Windows product key: *-* - WT6R8 - 6327 K-GWWKG
  The Windows Product Key hash: Gmsv/jf + QoTK9qcNbahxLaD0eU =
  Windows product ID: 00359-030-4975712-85824
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7600.2.00010300.0.0.003
  ID: {1F86B26A-08E7-476B-B899-EA720352BF6E} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7600.win7_rtm. 090713 1255
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Internet Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\npwatweb.dll[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\watux.exe[Hr = 0 x 80070003]
  [File mismatch: C:\Windows\system32\wat\watweb.dll[Hr = 0 x 80070003]

  Other data-->
  Office details: {1F86B26A-08E7-476B-B899-EA720352BF6E}1.9.0027.06.1.7600.2.00010300.0.0.003x 64*-*-*-*-GWWKG00359-030-4975712-858245S-1-5-21-574978640-4040440140-3185464333the system manufacturer,System Product NameAmerican Megatrends Inc. 0803 20080402000000.000000 + 000CBBB3607018400F204090409Time(GMT-05:00) Standard is03109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7600.16385

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, retail channel
  Activation ID: 2e7d060d-4714-40f2-9896-1e4f15b612ad
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00170-030-497571-01-1033-7600.0000-2672015
  Installation ID: 022112811074556642838793008526244620559831615076826121
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: GWWKG
  License status: initial grace period
  Time remaining: 39300 minute (s) on (27 day (s))
  Remaining Windows rearm count: 3
  Trust time: 27/09/2015-17:54:02

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: n/a
  Beyond: 0 x 0000000000000000
  Event time stamp: n/a
  ActiveX: Not registered - 0 x 80040154
  The admin service: not registered - 0 x 80040154
  Output beyond bitmask:

  --> HWID data
  Current HWID of Hash: MgAAAAEABAABAAEAAAABAAAAAgABAAEA6GHwqmY1uJGQpsgiejnCq/hqHMUq06 plus 7qJw

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  OEMAPIC 040208 APIC
  FACP 040208 OEMFACP
  HPET 040208 OEMHPET
  MCFG 040208 OEMMCFG
  040208 AMI_OEM LASRYVITRAGE

  You should try the phone activation.

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with

  activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Windows 7 is not friendly when installing programs

  I got nothing else problems with Windows 7 because I bought this computer. I spent countless hours with your support staff (HP) as well as support staff from companies I bought software that will not download on my computer. Below is my last means of support to Roxio:

  I have already received your explanation of long pages how to install your product on Windows 7. First of all, please excuse this next part I'm about to tear my hair!

  All I want to do is to install your program! I don't want to be a computer programmer! Windows 7 is a huge piece of _! Anyone can help me with the fact that I can't seem to install anything. Is there someone in your organization who can help me to disable all "security" features in windows 7 that stop me from using my computer as a useful tool as it should be? I already spent the money to upgrade to your Creator 2010 when 2009 worked just fine on my old computer because windows 7 has said I should. Well now it won't download to my new computer as well as your download Windows Installer Cleanup utility tips to get rid of the traces of the program who don't settle. Well guess what people - Microsoft has removed this utility from its Web site because it screws to the top of your operating system! WHAT NOW?

  I have a very busy life - two children, two jobs, not enough time and not enough sleep! I need things I spend my hard earned money on to work the first time, without having to get an another diploma in computer programming.

  I had several sessions with your personal online support that eventually included a clean installation of Windows 7! I got it! I want all the features of 'Safe' windows 7 is off! I am the ONLY user of my computer! I am the administrator! I won't be asked to give permission to download something on my computer just to come back and say that there no download in any case! I don't want one set of instructions in a 55-page memo explaining how "easily" this problem could be solved! I don't want this 'HUGE' issued to be fixed at this time only she either happen the next time I decide to purchase software to try to make my life easier. I want a permanent solution!  I won't contact you again this topic! I is uncomfortable to have to contact HP on a problem of Windows 7, but Microsoft will not support my Windows 7 because it was installed by HP, when I bought your computer! I spent a lot of money on this computer and so far I WAS NOT HAPPY! :(

  See if you can download the Windows Installer Cleanup utility through this Microsoft link.

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Which exact error message do you receive when you try to install anything?

  Windows Setup does not work when I try to install itune__error says windows install not installed correctly
  http://social.answers.Microsoft.com/forums/en-us/w7programs/thread/8e8b323b-B3CE-4753-b359-a7daa77cac9d/#c7120670-ACBD-4b1c-b883-d6719be70509

  Disable User Account Control (UAC) the easy way on Windows 7 or Vista
  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-user-account-control-UAC-the-easy-way-on-Windows-Vista/

  Enable the built-in Administrator account.

  Open a command prompt with admin rights by clicking Start, type cmd in the search/run box, hit CTRL-SHIFT-ENTER.

  At the prompt, type:

  NET user administrator / Active: Yes

  Then disconnect from your regular account and record as an administrator, you should be able to install the program. When you are finished, open a session to your regular account and, for security reasons, disabling the account administrator for assistance:

  NET user administrator / active: No.

  http://user.Services.OpenOffice.org/en/forum/viewtopic.php?f=15&t=11706#p55879

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  950093 how to use the System Configuration utility to resolve configuration errors in Windows Vista
  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 950093

  Windows sometimes has protection files and dumps in a hidden location similar to this one.

  "C:\Users\usernamexxxx\AppData\Local\Microsoft\Windows\Temporary Internet Files\Virtualized\C\Users\usernamexxx" typed in the box to begin running with the correct user name and the line includes quotes.  Discover the subfolders of this location, particularly one called downloads

  If no downloads never go away and find themselves in the situation above, read this.

  What does Internet Explorer protected mode?

  Internet Explorer protected mode is a feature that makes it more difficult for malware to be installed on your computer.

  In addition to helping protect your computer from malicious software, protected mode allows you to install wanted ActiveX controls or modules when logged in as an administrator.

  Protected mode is enabled by default in the Internet, intranet, Local and sensitive sites areas and an icon appears on the status bar to make you know it is running.

  By clicking on 'Protected Mode' (just above and to the left of the clock) allows you to disable.

  What ever you end up disabling or removing make sure you note how to turn things back on.

• Windows XP will not activate.

  Starting a box appears on the screen and Windows asks me to activate, when I do this another box comes up and says that Windows is already activated. I now have four days to activate Windows XP.

  It was a new update in a store, and yes a new motherboard has been implemented with only a few weeks. What is this business of piracy? This copy was placed in the shop and I used my original disc number I had in my old machine for a while?

  What we say here that XP original and the number isn't good and everytime I update, I have to buy a software from Microsoft?

  This means you are trying to install an OEM of Windows version which was provided by a computer on another computer manufacturer. A new motherboard is classified as a new computer and will not work.

• Windows Vista to windows 7 upgrade - making circles in the round

  I tried to upgrade Vista to windows 7 using the Microsoft Web site.

  The Upgrade Advisor confirms that I am compatible.  It contains a link to «get detailed instructions on how to upgrade»

  Step 1 of this guide request control panel > system for confirmation of the version and ends with "Next - install Windows 7 using the upgrade option.

  This opens another window titled "windows anytime upgrade".  With an option to "compare the editions of Windows Vista" clicking this takes you to another window titled "Windows 7 Upgrade Advisor" which does not allow to download the Upgrade Advisor, which is where I started

  Help

  http://Windows.Microsoft.com/en-AU/Windows-Vista/upgrade-to-another-edition-of-Windows-Vista

  Windows Anytime Upgrade is no longer available for Windows Vista.

  If you're running Windows Vista and want to upgrade your PC, go online to upgrade to Windows 7.

  Click on "upgrade to Windows 7" leads to:

  We're sorry, the requested page is not found.

  The URL may be misspelled or the page you are looking for is no longer available.

  As I said, that Microsoft sells more than 7.

  We do not work for Microsoft.

  We are mainly volunteers here; all other such users that help the posters in our time.

  As to why, you ask Microsoft.

  Kind regards.

• The x 64 Ultimate from Vista to Windows 7 upgrade. Should I buy WIndows 7 Ultimate to keep my applications?

  Same as title.

  The x 64 Ultimate from Vista to Windows 7 upgrade. Should I buy WIndows 7 Ultimate to keep my applications?

  Thanks in advance.

  Found my answer. I need Windows 7 Ultimate upgrade to keep existing applications.

• Windows 7 can not activate the 0x800702c7 error code.

  Original title:

  my pc can not update bacause of an 0x800702c7 error code

  my windows 7 can not activate bacause of an 0x800702c7 error code

  What will I do?

  Hello

   
  How you try to activate Windows?
   
  Reference:
  Activate Windows 7 on this computer:
  http://Windows.Microsoft.com/en-us/Windows7/activate-Windows-7-on-this-computer
  Activate Windows 7: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/activating-Windows-7-frequently-asked-questions
   
   
  I hope this helps!

• Windows PC upgrade to 10. Try to install the first Pro CS5. Does not work.

  Windows PC upgrade to 10. Try to install the first Pro CS5. Does not work.

  Download the following messages: Exit Code: 7 please see the faults and warnings below for troubleshooting. For example, ERROR: DW050... WARNING: DW036, DW066...

  -0 fatal Error (s), 82 (s), 124 warning (s)

  Any idea?

  Thank you

  Jaap

  Do you have other Adobe applications installed on your computer?

  Navigate to C: > Program Files > Adobe.

  Open the Adobe folder and check if the Adobe Premiere pro CS5 folder is created with files stay inside?

  Let us know.

  As System File Checker run command once and see if \any system files are corrupt. As you had upgraded to Windows 10 we will check the system files once. Later we can try to provide full permissions for the required records.

  https://support.Microsoft.com/en-in/KB/929833

• Error "Windows Media could not find a certificate to connect to the network" when connecting to a secure wireless network with WPA2.

  Original title: I'm having a problem trying to connect to a Windows XP SP2 to a wireless secure with WPA2, had this error "Windows Media could not find a certificate to connect to the network.

  Not Applicable

  Hi StheveOses,

  As Cameron O have rightly said, you must have Service Pack 3 and other important updates installed. If you continue to experience problems with the connection to the wireless network, you will have a quick glance at this article.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  (Works for Windows XP SP3 as well)

  I hope this helps.

• My computer says "windows defender is not found", and I can't change the startup of programs in the Control Panel, it says cannot find 'C:\program '.

  Original title: can you help me?

  My computer says "windows defender is not found", and I can't change the startup of programs in the Control Panel, it says cannot find 'C:\program '. I'm vwindows vista

  My computer says "windows defender is not found", and I can't change the startup of programs in the Control Panel, it says cannot find 'C:\program '. I'm vwindows vista

  You in fact 2 questions.
  I will answer the one who is the most important, for you it is.

  RE: Change startup programs

  You can access this way startup programs...

  Start button > in the search box, type msconfig > Enter > click on Startup tab. Here's your startup programs.
  To disable, uncheck the box in front

  To activate... check the box opposite.

  RE: Windows Defender cannot be found.

  If you have the following AV, antivirus, programs installed, close your Windows Defender. Purpose of these AVs have their own advocates. 2 defenders on the same machine will create conflicts.
  Bottom line: it's ok. It's normal.
  List of AVs which will stop Windows Defender:
  Norton
  McAfee
  AVG
  Microsoft Security Essentials

  If you don't have AV programs above, here's how to restart Windows Defender:

  Start button > in the search box, typeServices > press the Enter key > scroll to find Windows Defender, click on it >...
  topic status , it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say that, right click on Windows Defender > click Properties >
  in Startup Type, click on the pointer to the right and select automatic
  to the service status, click Start
  Click OK when finished.

• Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.

  Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile