Vista Ultimate - SFC report WmiPrvSE errors

Here are the two errors I get.

2010-01-22 01:30:09, CSI Info 0000018 d [SR] verification complete
2010-01-22 01:30:09, CSI 0000018e [SR] Info components check 100 (0 x 00000064)
2010-01-22 01:30:09, CSI Info 0000018f transaction [SR] beginning verify and repair
2010-01-22 01:30:13, info CSI 00000190 [SR] cannot repair the military record [l:24 {12}] "WmiPrvSE.exe" Microsoft-Windows-WMI-Core-ProviderHost, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, impossible to verify files "
2010-01-22 01:30:20, info CSI 00000191 [SR] cannot repair the military record [l:24 {12}] "WmiPrvSE.exe" Microsoft-Windows-WMI-Core-ProviderHost, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, impossible to verify files "
2010-01-22 01:30:20, Info CSI 00000192 [SR] this element is referenced by [l:160 {80}] "" Package_25_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 113_neutral_GDR ""
2010-01-22 01:30:20, Info CSI 00000193 repair results created:

2010-01-22 01:32:05, CSI Info 000001 c 5 [SR] check all the
2010-01-22 01:32:05, CSI Info 000001 c 6 [SR] repair of components 1
2010-01-22 01:32:05, CSI Info 000001 c 7 [SR] beginning operation check and repair
2010-01-22 01:32:05, CSI Info 000001 c 8 [SR] cannot repair the military record [l:24 {12}] "WmiPrvSE.exe" Microsoft-Windows-WMI-Core-ProviderHost, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, impossible to verify files "
2010-01-22 01:32:05, CSI Info 000001 c 9 [SR] cannot repair the military record [l:24 {12}] "WmiPrvSE.exe" Microsoft-Windows-WMI-Core-ProviderHost, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, impossible to verify files "
2010-01-22 01:32:05, 000001 ca CSI Info [SR] this element is referenced by [l:160 {80}] "" Package_25_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 113_neutral_GDR ""
2010-01-22 01:32:05, 000001cb CSI Info repair results created:

Please help me to correct these errors.

Unfortunately I don't have to a true VISTA installation CD. All I have is practically worthless Toshiba recovery disks.

Thank you

You will need to borrow a DVD of Vista from Microsoft to make repairs:

If SFC finds serious errors that it cannot repair, you may need to do a upgrade Vista repair install.

If you do not have a DVD of Microsoft Vista, borrow one from a friend.

Read this tutorial on how to do a repair installation:

http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

See you soon.

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • I had to reinstall my real Vista Ultimate disk > it says error: Ox80072F8F. Please, how can I install completely?

    Hello

    I had to reinstall my real Vista Ultimate disk > it says error: Ox80072F8F.Please, how can I install completely?

    Hi GjinNoku,

    1. when exactly do you get this error during activation of the copy when installing or all by activating the copy after reinstallation?
    2. how you try to install Windows Vista (Format clean install or custom install)?
    3. why you re - install Windows Vista?
    4. What is the exact error message you get?

    The information is not sufficient to answer your question. Please give us more information to answer your question better.

    Additional information:
    Installation and reinstallation of Windows Vista
    http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

    Error message when you start Windows Vista: "your activation period has expired".
    http://support.Microsoft.com/kb/925616

  • Fix a SFC reported an error with WmiPrvSE.exe

    At first, I lived an extremely slow response with Vista Ultimate. Sometimes the locks system for a few minutes. THS drive activity light was lit.

    After watching the activity in the PERFORMANCE Monitor, I disabled the Indexing Service and the SuperFetch service. The system works a lot better now.  I would like to reuse these services, but that's a topic for another question.

    I ran SFC/scannow, and he noted several uncorrrectable errors affect all program WmiPrvSE. Here's just one of the errors.

    2010-01-20 16:03:47, CSI Info 0000018f transaction [SR] beginning verify and repair
    2010-01-20 16:03:51, info CSI 00000190 [SR] cannot repair the military record [l:24 {12}] "WmiPrvSE.exe" Microsoft-Windows-WMI-Core-ProviderHost, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, impossible to verify files "
    2010-01-20 16:03:57, info CSI 00000191 [SR] cannot repair the military record [l:24 {12}] "WmiPrvSE.exe" Microsoft-Windows-WMI-Core-ProviderHost, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, impossible to verify files "
    2010-01-20 16:03:57, info CSI 00000192 [SR] this element is referenced by [l:160 {80}] "" Package_25_for_KB948465 ~ 31bf3856ad364e35 ~ x 86 ~ ~ 6.0.1.18005.948465 - 113_neutral_GDR ""
    2010-01-20 16:03:57, info CSI 00000194 [SR] verification complete

    How can I fix this error?

    Thank you

    Hello

    Run Checkdisk then run the SFC/scannow again and see if you actually get the same error.

    How to run the check disk at startup in Vista
    http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

    -----------------------------------------------

    If necessary:

    If you can uninstall SP2 back to SP1 - SP1 or to return to standard Vista. You can go ahead
    Back to MS, you were at the same time, it is fixed.

    Try an InPlace upgrade.

    You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation.

    You can use another DVD (same 32/64 bit) because they are not protected, but you will need to copy you have the product key.

    On-site upgrade
    http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    How to perform a repair for Vista Installation
    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Need help to install Vista Ultimate x 64 SP1 - error 0x800F081F - standard corrections do not work

    I have trouble getting Service Pack 1 installed on Windows Vista x 64 final.

    Current issue: SP1 does not appear as an update, and I have not yet installed.  Windows Update tells me that I'm completely up to date.

    History (memory, may be some errors):

    • Performed the new installation, including Vista Ultimate x 64 disk erasure (MSDN)
    • Updated to current with windows update
    • Installed Office 2007 Ultimate (MSDN) (don't know where update what happened)
    • Active Windows (could be a problem doing this after you install updates?)
    • Installed CPU usage, network, gadgets sidebar discs counter meter
    • Installed Live Family Safety
    • Installed Chrome
    • Installed Google Apps
    • Google Pack antivirus installed
    • Installed Google Earth
    • Attempted a manual installation of SP1 - fails with the error 0x800F081F
    At the present time, I can't get a manual of installation of SP1 to work, and Windows Update tells me that I am up to date.  -> System control panel tells me I'm running Windows Vista Ultimate, but does not list all service packs.  He also confirmed that the x 64 edition is installed.
    Steps for debugging:
    • Installed the drivers for the sound card motherboard
    • A ran complete chkdsk on drive to repair bad sectors
    • Ran the system file checker - find corrupted files, but can't fix
    • Journal CBS does contain no [SF] cannot repair the entries
    • Installed continues to update the system tool - tool does eventually make a update facility - who settle whenever I run
    System Information Link: http://www.filedropper.com/systeminfo

    [1] this is a new installation, so nothing has been pre-installed.

    [2] the only antivirus that was installed is the one that is included in the google pack.  I took it...

    [3] SP1 does not appear as an update

    [4] I'm strongly considering just clean wiping and [do a clean install]

    A1. If Vista was preinstalled on the computer when you bought it and you use the OEM disks (or hidden restore partition) to reinstall Windows, any antivirus free trial which initially is preinstalled on the computer will be reinstalled, but not valid.

    A2. You have therefore no anti-virus application installed. I see.

    A3. There are several prerequisite updates that must be installed before SP1 will be offered. See...

    Windows Vista and Windows Server 2008 service Pack is not available for installation via Windows Update
    http://support.Microsoft.com/kb/948343

    A4. Since you do not have an antivirus application installed, it would be your best bet. See...

    Cleaning a compromised system
         http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

    Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

    HOW to do a clean install of Vista: section "If you want to reinstall Windows Vista by running a new installation...". "ofhttp://windows.microsoft.com/en-us/windows-vista/Installing-and-reinstalling-Windows-Vista

    Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before connecting a flash drive, card SD or any other external disk to the computer:

    4 steps to help protect your new computer before going online
         http://www.Microsoft.com/security/pypc.aspx

    Tip: After completing the computer fully patched, download/install KB971029 manually before connecting any player external to the computer:http://support.microsoft.com/kb/971029

    NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool appropriate prior to installing the updates, Windows Service Packs or IE upgrades AND BEFORE installing your new anti-virus application.

    Norton Removal Tool
         FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

    McAfee Consumer product removal tool
         http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

    If you need help, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/vistarepair/threads

    Good luck!

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Vista Ultimate SP1 to SP2 error: Code FF

    System: HP d5000t with 6 GB of memory; 408 GB of free space on the hard drive; w2408H 24 "monitor running Vista Ultimate SP1.

    I tried a dozen times more than 3 months of updating Vista Ultimate 64 bit SP1 to SP2, each time that the error below.  It's the only update I have been unable to do.

    I take the following steps:

    : Download the update

    : accept the license terms

    : a window "install Windows Vista Service Pack; "Save your work, close all open applications and then click on install ', what I do

    : a message, ' Self extraction Stub has stopped working: a problem caused blocking the program works correctly. "  Windows will close the program and notify you if a solution is available - close the program", which I do.

    Still, the following message appears:

    Some updates have not been installed.
    Failed: 1 update
    Error(*s) found:
    Code FF     Windows Update has encountered an unknown error.  Get help with this error
    1 result for "WindowsUpdate_000000FF" "WindowsUpdate_dt000"

    0x000000FF Error_EA_List_Inconsistent
    Extended attributes are not consistent, the installer has sufficient privileges to access this directory

    What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you tried to install SP2?

    A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

    Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for Windows Vista Service Pack 2 (SP2) is valid until November 26, 2009. Availability of support chat or messaging differs depending on your location. Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Vista Ultimate 32-bit gives errors when installing

    I tried 7 times to install SP2, and it is down just 7 times, with 3 different errors: 80242016 (9/19), 80246067 (10/1), 80004005 (10/1), 80242016 (11/15), 80242016 (today) and 80004005 (twice now). I also noticed that some other updates do not appear to be installed correctly, for example KB974306 supposed to be properly installed on 10/14, but Windows Update tried to reinstall twice on 11/15, twice failed them. These updates do not appear in Windows Update now. Exactly the same story for KB954155, KB968816 (initial installation 9/9), KB856744 (8/23), KB961371 (8/23), and the list goes. All this had an installation failed twice on 11/15. Today, I have disabled Symantec Antivirus before the first installation, tried this before either: http://support.microsoft.com/kb/971058 and KB947821 installed before the third attempt. The only possibility I can think of questions is that I disabled some services when I did the initial Setup, but I don't remember what they were, but I don't think they had anything to do with updates. Any ideas?

    Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • I have windows fix windows vista ultimate.using happens an error code 0 x 80092003.what what I can do

    my google chrome keeps frezzing up.so I tried windows fix it.this comes up with an error code 0x80092003.each time I try to use fix on any problem why

    Hello

    ·          Who solve what are you trying to use?

    ·          Have you tried to reinstall Google Chrome?

    Step 1: For error code 0 x 80092003, you can see the following Microsoft article. You can use the system update tool and check if this helps solve the problem-

    http://support.Microsoft.com/kb/947821

  • get the engine deployment error while installing Vista Ultimate 32-bit

    When I try to load vista ultimate I get an error message; Windows game could not reset the deployment engine. To install windows restart installation. then I start again with the same results. Vista can't handle new computers? This is a new computer without an operating system.

    Hello

    1. how you try to install Vista? You install using Setup disc or try to re the image?

    Please check the compatibility of your drive with Vista:

    http://www.Microsoft.com/Windows/compatibility/Windows-Vista/search.aspx?type=hardware&s=Seagate%20barracuda%201.5%20TB

    You can use third party software to do a low-level format of the disk, and then try to install Vista once more.

    Important: Microsoft offers no assurance or warranty, implied or otherwise and is not responsible for the download you receive from the sites of third parties or support related to the download or the downloaded technology. If you need assistance dealing with third party technology, please contact directly the manufacturer.

     

    If this does not work please get another Vista Installer DVD to install it.

  • error 800b0100 windows update KB2660649 - Windows Vista Ultimate 32 bit SP2 installation - solved

    Original title: 800 b 0100 KB2660649

    • Run Windows Update on Vista Ultimate 32 bit SP2 under BootCamp on Macbook Pro
    • Trying to install KB2660649 by using Windows Update
    • Difficulty is unable to install - response 800b0100
    • Running sfc/scannow - successful, no error
    • Have downloaded and run the update tool system - successful, no errors
    • Downloaded and run the stand-alone version on the fix - failed, and saw the following in the system log: Windows Update 'A security update for Windows (KB2660649)' could not be installed because of an error: 2148204800 "no signature was present in the subject. (Command line: "" C:\Windows\system32\wusa.exe""C:\Users\steve\Downloads\Windows6.0-KB2660649-x86.msu"")
    • Tried WU and seen the following in the system log messages: b Windows Servicing began a process of change in package KB2660649 (security update) State of Resolved (Resolved) to Staged (Staged) (b) Windows Servicing has not completed the process of the configuration package KB2660649 (security update) in State of Resolved (Resolved)

    Any ideas anyone please?

    Amazing!  I have already mentioned that I lived the problem of the "feature Windows empty window.  Seeing that my initially reported problem and seemed to have similar signs and given that I had a clear explanation on how to solve this problem, I did it - and these two problems are now history.

    In the two following links, you will find the description and method to solve the problem of the 'empty Windows feature window' and (b) a method for appropriating errant registry entries.

    http://www.Raymond.CC/blog/fix-blank-or-empty-list-in-Vista-turn-Windows-features-on-or-off-optionalfeaturesexe/

    http://www.Raymond.CC/blog/full-control-permission-to-delete-or-edit-restricted-Windows-registry/

    This * may * solve your problem too - it seems that there is a generic problem with determination rather poor problem feedback.

    Good luck and thanks to all who contributed

    Best regards, Steve

  • cannot activate windows vista ultimate 64-bit it says error code: 0xc004E003

    activate Windows vista ultimate 64 bit

    cannot activate windows vista ultimate 64-bit it says error code: 0xc004E003

    Hi Jarska,

    ·        You did changes to the computer recently before the issue started?

    ·        If your computer came pre-installed with Windows Vista, or you don't have it installed separately?

    You receive this error 0xC004E003 when the Software Licensing Service reported that license evaluation failed on your computer. You can access the link below and follow the steps in method C and check if that helps you solve the problem of activation. If the C method does not work, you can follow the steps in method G and try activation using the automated phone system.

    http://support.Microsoft.com/kb/931276

    I hope this helps. Let us know the results.

    Thank you and best regards,

     

    Srinivas R

    Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Taskeng error (Vista Ultimate). PC will not properly shutdown

    Hey Microsoft board gurus,

    (Running Vista Ultimate on a Dell Optiplex 330)

    SHUTDOWN PROBLEM, here is what happens:

    1. I use start menu & off the pc.
    2. PC seems to turn off (but a few small red lights twinkling near the power button / at the front of the Tower & the rest of button IT turned on.)
    3. After about 10 minutes, the PC then restarts by itself
    4. He can complain about "an unscheduled stop.
    5. Then
    6. I stopped again, and finally, it shuts

    Sometimes to get it off, I have to make a hold in the power button.  I know that regularly isn't good for the computer.

    At some point after the pc auto-entrée back, he sent this taskeng error, so maybe this is a hint on the cause of the problem.

    • I tried to do a restore from the registry to May 7 (a date the pc was ok), tried ending taskeng before stopping, and I let a Windows system/repair/recovery Volume and still have the problem.
    • Thinking maybe the computer was in the middle of the installation of Windows updates when I turn me off my PC at night, I have reviewed the updates of Windows 'Important' that were pending / CCEd would be / available, and they are useless for me (Office 2007 and IE) and should not have been install.
    • I tried a few other things, and the problem happens even about half time or more when I turned off the PC for the night.
    • I spoke to Microsoft; they don't help me without paying because my license code Vista is OEM, meaning that Dell is responsible for helping me.  Dell will not help me without paying because they say that it is a software problem and those who are not included in no charge technical support and was told to talk to Microsoft.

    Any advice to get my computer to close normally again?  It is very annoying because it takes TWO stops in about 10 min. OR a hold-in button stop making my PC actually turn off.  The text of the error below.  Thank you.

    Signature of the problem:
    Problem event name: BlueScreen ((registry of means files are corrupt MATERIAL ts rep sales; AFTER this error if I post in the community))
    OS version: 6.0.6002.2.2.0.256.1
    Locale ID: 1033

    More information about the problem:
    BCCode: 9f
    BCP1: 00000003
    BCP2: 86DDA430
    BCP3: 86DE1348
    BCP4: 8460BE28
    OS version: 6_0_6002
    Service Pack: 2_0
    Product: 256_1

    Files helping to describe the problem:
    C:\Windows\Minidump\Mini050910-02.dmp
    C:\Users\Kurt Kirton\AppData\Local\Temp\WER-40029-0.sysdata.xml
    C:\Users\Kurt Kirton\AppData\Local\Temp\WERCAAD.tmp.version.txt

    Read our privacy statement:
    http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

    You said Details of the bugcheck 0x9f - DRIVER_POWER_STATE_FAILURE. "This bug check indicates that the driver is in an inconsistent or invalid power state." The problem is that "a device object has been blocking an IRP for too long."

    You can download the contents of the c:\windows\minidump on SkyDrive and provide a link?

    Consider the following general guidelines for dealing with bluescreens.

    Consider running chkdsk on all partitions.  Leave complete chkdsk on each partition and see if that helps.

    Also consider running SFC/scannow.

    If you start in safe mode, do you still feel bugs? What if you do a clean boot, or boot device?

    Consider the memory with memtest86 or Windows Memory Diagnostic test. Note that memory that pass the tests isn't necessarily good memory - he not only failed a review.  Examine systematically to eliminate the system RAM - run with a few modules for awhile and see how things are going. Then try the other modules.

    Other common suggestions include ensuring drivers are up to date, but also to ensure that you use the latest version of the BIOS.

    It may be useful to use the driver verifier.  To activate the... Driver Verifier start-> verifier.exe-> OK-> create standard settings-> next-> driver select the names to a list-> next-> sort by provider-> select all other Microsoft drivers-> finish and OK your way out of the dialog box.

    Then restart and use the system as you normally and wait for a problem.  In case the system does not completely start after activation of the Verifier, boot mode safe and run driver verifier and tell him to remove the changes.

    Wait for a bugcheck occurs after you have enabled the auditor as described, and then download the dump on your SkyDrive and provide a link.

  • Satellite P200 Vista Ultimate - boot configuration data read error

    I have a Toshiba Satellite P200 running Vista Ultimate.

    Recently I started having a problem after restarting after the installation of vista updates. In fact, it will not start at all and gives me the following message on a black screen.

    Windows could not start. A recent change in hardware or software can cause of bethe. To solve the problem:

    1. Insert your windows installation disc, and then restart your computer
    2. choose your language settings, and then click Next.
    3. click on "repair your computer".

    If you do not have this disc contact your manufacturer aministrator or the computer of the help system.

    File: \Boot\BCD

    Status: 0xc00014c

    Info: An error occurred trying to read the boot configuration data.

    The only way I can fix it to insert the recovery dvd and click on repair. This levonorgestrol only when the computer restarts after an update. If I manually turn off the computer, then on start up fine.

    I don't want to put automatic offf to update more because I think they are important from the safety point of view, however, this situation is not acceptable.

    Can someone please help.
    I have a screenshot of the error, but have reproduced the information above.

    Hello

    In my opinion, there is something wrong with your mater boot (MBR) of the drive and therefore the bootloader causes an error.

    Usually, you might be able to fix it using the original disk of Vista but it s really strange that this problem still occurs after the update to vista.

    In my eyes, you should really check if the same problem would happen using the Toshiba factory settings and configuration.

    Good luck

  • VAP 1.1.19 error installation on Vista Ultimate - GetProfString is broken

    I have an A300-1i4 with Vista Ultimate 32 bit as OS.

    And when trying to install the package of value-added 1.1.19 I get the following error message "GetProfString is down..."

    Any idea or suggestion to this incident?

    Thank you.

    Hello

    First, you must remove the older version of VAP.
    Then you must clean the BONES and the register using the free also called CCleaner.
    This could be important to ensure that Vista does not contain old files VAP.
    After restarting again, you can try again to install the VAP.

    By the way; I m not very good, but it might be possible that VAP does not support full version Vista Ultimate.

  • How to fix 8024200d error code in vista ultimate sp1

    How to fix 8024200d error code in vista ultimate sp1

    You may encounter temporary connection related errors when you use Windows Update or Microsoft Update to install updates:
    http://support.Microsoft.com/kb/836941

    What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

    A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Error message of HALO CE on vista ultimate, unload debugger, game worked fine on xp. ?

    error message on vista ultimate, a DEBUGGER has BEEN DETECTED, UNLOAD THE DEBUGGER AND try AGAIN.

    Hi trtparadise,

    Welcome to the Microsoft Answers community.

    a. which version you are trying to install?

    You can check the compatibility of this game using the link below.

    http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?type=software&s=Halo

    To resolve this problem, use the following methods in the order that they appear.

    Method 1: Rename the Amdfix.sys file

    1. click on start and then click search.

    2. in all or part of the file name box, type amdfix.sys.

    3. click on search now.

    4. in the list of search results, right click on Amdfix.sys, click Rename, and then rename the file as Amdfix.sys.old.

    5 restart your computer.

    If this does not resolve the problem, go to method 2.


    Method 2:
    restart the computer by using a clean boot procedure

    1. click on start, run, type msconfig in the Open box, and then click OK.

    2. in the general tab, click Selective startup.

    3. under Selective startup, clear the following check boxes:

    o SYSTEM process. INI file

    o Process WIN. INI file

    o load startup items

    4. on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

    5. click OK and then click on restart.

    For more information visit: http://support.microsoft.com/kb/331796 . In addition, see the section on how to restore your computer to a Normal startup mode.

    If this does not resolve the problem, go to method 3.

    Method 3: Update sound card drivers

    Steps to update the driver:

    1. click on the Start button.

    2. in the search box type devmgmt.msc, and then press ENTER.

    3. Select the audio device and right click on it

    4. now, select Properties.

    5. in the Properties window, on the driver tab, click Update driver.

    6. After installing the updates, restart the computer.

    You can also contact your audio hardware manufacturer to obtain and install the latest version of the driver for your sound card. For more information about how to contact the manufacturer of the sound card, see the References"" section. Otherwise, refer to the following Microsoft Windows Update Web site to determine whether applicable driver updates are available:

    http://windowsupdate.Microsoft.com

    If this does not resolve the problem, go to method 4.

    Method 4: Disable the creative welcome menu

    1. click on start, point to programs, point to Sound Blaster Audigy and then click on the Home Menu.

    2. Click to select the do not show this box again and then click Close.

    If this does not resolve the problem, go to method 5.

    Method 5: Configure the Audigy in the System Configuration utility

    1. click on start, run, type msconfig, in the Open box, and then click OK.

    2. in the System Configuration Utility window, click the Startup tab.

    3. Click to clear each check box Audigy-associated, and then click OK.

    For more information visit:

    http://support.Microsoft.com/kb/812759

    http://support.Microsoft.com/pchalofaq

    You can also try to install vista or XP compatibility mode.

    For more information, visit the links below:

    http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

    http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

    Hope this information is useful.
    Let me know if it worked.

    Thank you, and in what concerns:
    Umesh P - Microsoft Support
    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for

  • Satellite P10-304: bad sectors on the disk - how to fix?

    My drive HARD drive bad sectors developed and replacement needs, does anyone know how to do this? My model is a P10-304. In addition, Windows will not start upward in my old HDD because of bad sectors and the drive is protected by Norton and back, do

  • HP PSC 1100 COMPATIBILITY WITH THE WINDOWS OPERATING SYSTEM ERROR 8

    Dear team, My HP PSC 1100 PImprimante is not printing documents with windows system 8. I installed the original drive and the PC it accepts. but do not print. I tried installation wrong shhot online but found no printer PSC 1100 with the installer of

  • LabVIEW stops on a VI during a search for text in all of the project

    Hi, I have a strange problem. I have a fairly large project (363 screws) written using the Framework of the actor. During the search (Ctrl + f) for a text, LV is looking for the following files, but when it comes to file Helpers.lvlib:Test watki.vi (

  • How to restore WRusr.dill

    I installed Firefox on my computor but when I try to use it it shows cannot find WRusr.dill. I have no idea wht he is but he says reinstall me but when I do the same thing happens. It has also affected my game Peggle. I need help

  • A message appears everytime I turn on my PC

    Whenever I connect to my system, this message - error loading C:\Windows\systems32\hgGvturr.dll - the specified module could not be found. Can someone please help me solve this problem. He arrived last month.I don't know what to do. Concerningrose246