Vista was able to start after the auto update today

the system configuration might caused the problem, the system files check integrity and repair failed, code of error = 0xa
computer model acer Aspire 4930 - 732G 25 windows vista home edition premium OA (EM), no installation cd supplied so can not roll back, System Restore does not...

keongklee,
First, start from the Advanced startup options , and then select the 'last known good configuration."  If this does not work, try to start safe mode and then try a system restore.
If your system did not come with a restore disc it must have a recovery hard disk partition.  You will need to check with Acer to see how to get there if you want to perform a factory restore. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • I have a compaq presario cq60 with vista which was able to start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. What can I do?

    I have a compaq presario cq60 with vista. Could not start after the installation of windows updates. HP recovery failed with error code 100a and bios self-test gave error fail #1-07. I took the hard drive and installed in my office. Windows Explorer displays the main and recovery partitions.

    The primary partition has the following folders (including hidden & system)

    The recovery partition has the following (including the language files more)

    Someone at - it ideas why my laptop does not work?

    Thank you

    Greg

    Hello

    You press F11 on startup with a HP Compaq to start the recovery process.

    For problems with the recovery process, you will need to contact HP.

    BIOS problems:

    There are messages for the HP Forums for posters with similar errors:

    http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/notebook-HDD-problems-TEst-status-1-07-fail/TD-p/658902

    http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-dv8000-getting-1-07-fail-error/TD-p/883284

    http://h30499.www3.HP.com/T5/notebook-PCs-pavilions-Presario/HP-Pavilion-notebook-dv6000-1-07-fail/TD-p/1069457

    All the answers it point to a drive about to fail

    See you soon.

  • Satellite Pro L850: ATI Catalyst was able to start after the update of Windows

    Satellite Pro L850 with Windows 8 Pro 64 bit running OK with default Toshiba Catalyst Control Center and the 8.982.10.6000 video driver version. Video chipset is AMD Radeon HD7670M.

    This week, Windows Update offered an update of WDDM1.2 for HD7670M video driver to version 9. I thought it was OK to install it, as he came formally to Microsoft. The updated video driver installed OK.

    After a reboot everything works perfectly except the specially modified Toshiba Catalyst Control Center. CCC reports that "there are currently no parameters that can be configured using Catalyst Control Center". After that I drove back the new video driver version 9 to version 8.982.10.6000, CCC started working again.

    I checked for my laptop model Toshiba product support page, but it is not a new CCC by download. Toshiba will never be released a new CCC that works with the new Microsoft video driver? What alternatives are there?

    As far as I know these drivers are offered as option drivers and you should not install them. Stay with the original drivers. Don t update a driver offered through Windows update.

    Have you tried to roll back the OS to an earlier time before this update has been installed? If it does not do it and check the functionality.

  • WLan AutoConfig was able to start with the error 193:0xc1

    Former title: error 193:0xc1

    My wireless does not connect because it says that the WLan service failed to start.

    I went to the computer > manage > services > WLan AutoConfig. It has been set to automatic but it was empty when he should have said start. When I tried to start it I got the message service was able to start and the error in the title.

    I opened the dependencies in order to check if that was the problem and each of them have begun. So, it seems that the error is always in WLan AutoConfig.

    I tried the system restore (this problem just started today) to an earlier point, last week. It sticks on the system restore is initializing an hour +. I tried several restore points, but it always gets stuck on initialization.

    I looked at similar questions and I did everything recommended in people, but it seems that the answers stop without the original poster saying that they got it to work or not.

    Hello
     

    Step 1.
    Follow the steps below and check if the problem is resolved:
    a. Click Start, and then click computer.
    b. go on the system disk, where the operating system is installed (usually drive C :).
    c. find the program file.
    d. remove this file and restart the computer and check if you are able to start the service.
    Note: If you don't see the program file check if the file is hidden. Clickhere to find out how to show hidden files.
     
     
    Step 2.
    If the steps above to solve the problem I highly recommend to run a Virus Scan online.
     
    Sometimes the security program installed might not be fair enough. I also recommend you update your security software regularly.
     
    a. follow the link below to start the free online scan:
    http://OneCare.live.com/site/en-us/default.htm
     
    b. run the malware removal tool from Microsoft.
     
    Microsoft Malicious - 32-bit removal tool
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en
     
    Microsoft Malicious removal tool - 64 bit
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en
     

    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • 'Circular session context Logger Kernal' was able to start with the following error: 0xC0000035

    I hope it helps someone as it has been a persistent problem for some time at least six months. I did the research almost as long and also a solution for this, but I'm done here as a last resort. My question to had is that I believe that this occurs at the start of most of the time with the system, but can occur later also is originally the system will block also up and we have four other systems here that this was never a problem at all. I'm still looking and I hope to find an answer somewhere with out having to do a complete clean reinstall 7. I looked here for answers and met several all through the web, including here none have solved the problem.  I would be grateful at least someone leading me in the right direction on this issue if you can.

    Hope this is the right place to post also. If this isn't the case, please advise.

    Journal name:

    Source:

    Date:

    Event ID:

    Microsoft - Windows - Kernel-also racingl Admin
    Microsoft - Windows-Kernel-EventTracing

    02/06/2013 -07:59:57

    2

    Task category: Session

    Level: error

    Keywords: Session

    User: SYSTEM

    Computer: BarbKeenan-bail

    Description:

    Session "circular kernel context Logger" was able to start with the following error:

    OxC0000035
    EventXmI:


    BDB6-4648-BC92-F3FDC74D3CA2}">I >
    2

    O

    2

    2

    12
    Ox80000000000000 1 O

    I >
    2713

    I >

    I >
    Microsoft-Windows-Kernel-EventTracing/Admin
    BarbKeenan - bail

    I >


    Kernel context Logger circular

    3221225525
    268436608


    For what it's worth, I have this error periodically on several Windows 7 systems.

    She seem to be a non-event and does cause some system problems.

    I don't think that your freezing problem is caused by the present.

    However, take a look at this thread.

    http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/2eab69ac-7537-40c4-916e-6f6d41c05d4b

  • Session "circular kernel context Logger" was able to start with the following error: 0xC0000035

    Is there a way to eliminate the error "Session"Circular kernel context Logger"was able to start with the following error: 0xC0000035?

    Hello A123.

    Thanks for the return of the response.  Regarding your last question, some were told that they have ignored this error without any problem, but I would like to see if we can fix that.  If you start in a clean boot state, you can reproduce this error?  I want to see if a program is causing this to happen.

    Clean boot:

    http://support.Microsoft.com/kb/929135

  • Journal of session "Homegroup" was able to start with the following error: 0xC0000035

    Hi my event error log says: session "Journal of home group", was able to start with the following error: 0xC0000035

    I don't have a setup of home group because I am the sole operator of my PC. (Windows 7 SP1 x 64).
    I assume that the error is so wrong? Y/N?
    If so is there a way to change the reports for this message?
    Thanks for all the support.

    Hello

    1 are you facing a problem to work with any application because of the error?

    2. do you have connected on a network printer?

    3. you remember changes to the computer before the show?

    I suggest you try the following:

    Run a scan of the System File Checker.

    http://support.Microsoft.com/kb/929833

    Also, make sure that homegroup is not created on the computer, even if the computer is not connected to the other computer. When you configure a network device it will prompt you to create a home group. Check the following link to leave a homegroup.

    http://Windows.Microsoft.com/en-us/Windows7/leave-a-HomeGroup

  • vCenter Service was able to start with the error failed to create the front of SINGLE sign-on: vmodl.fault.SystemError

    Hello

    Can someone guide me how to solve this error? vCenter service is not getting started, I looked in the newspapers vpxd and found the following error.

    vCenter Service was able to start with the error failed to create the front of SINGLE sign-on: vmodl.fault.SystemError

    Thank you

    John

    Hi John,.

    This is due to host on the vCenter server entries. Please try the procedure below

    Connect to the vCenter server, edit the/drivers/etc/hosts file in Notepad

    C:\Windows\System32\drivers\etc\hosts

    # 127.0.0.1 localhost

    Note: If a line does not exist in the hosts file, add it at the end of the text.

    #) to remove the comment from the line of IPv4.

    1. 127.0.0.1 localhost
      ·  Save and close the file.
    • localhost127.0.0.1.

      • GoTo services.msc and start VMware Virtual Center Services.

    Thank you

    Venance

  • Every moment & then my Vista Original fails to start after an automatic update & shutdown.

    I had upgraded from XP to Vista Home Premium.  All updates are on. I also use Microsoft essential security such as anti-virus protection. Every moment & then my Vista Original fails to start after an automatic update & shutdown. I had to reinstall all my programs. Happen 3 - 4 times in less than a year. The disturbances windows also does not work

    Any Advisor. Should I upgrade to XP?

    Hello

    Make sure that you do not install hardware 3rd party via windows update drivers

    they are normally not up to date and can cause computer problems

    change the way you receive updates and check what you install ad if you don't not right-clicking on UAC prompt you to hide it:

    http://www.bleepingcomputer.com/tutorials/tutorial140.html

    Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

    Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

    and if you're still stuck in a loop non-Boot read these methods on how to try to fix it:

    1st thing to try is a restoration of the system in safe mode

    http://www.windowsvistauserguide.com/system_restore.htm

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If that does not read this information

    the link below is how to download and get a vista disk startup repair, which you can start from the

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

    It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

    Change boot order it do dvd drive 1st in the boot order

    http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

    ;

  • Vista 32-bit Home Pemium does not start after the automatic update. Crashes 90% during step 3 of the configuration of update.

    Started to start for the first time today, and after half an hour of PC was still at the stage of configuration update 3 to 90%. Tried to restore the last good configuration without success. IE 9 has been installed yesterday and I rebooted a couple of times very well. I guess an automatic update downloaded all night is the problem.

    Hi Dick50,

    Try the following and check if it helps.

    Method 1: Try to start the computer in safe mode and see if you can start fine. If he is able to start try to perform a System Restore.

    System Restore: frequently asked questions

    Method 2: If it is impossible to start then try to boot into the Windows recovery environment (WinRe).

    ·         Do the Startup Repair.

    ·         Achieve the restoration of the system from the same options.

    Method 3: Once you are able to start normally, look for the updates and take note of the update that is offered.

    Just reply with the results.

  • My pc with UEFI windows8 was able to start at the WSC windows8

    I don't know if it's supposed to happen, but recently I wanted to install windows7 and I put my system in legacy mode and came a message saying that I wouldn't be able to start the operating system. To restart my system, Windows8 was able to boot to the CSM. If it's supposed to happen? When I changed it to UEFI also started. My system can start at windows 8 in the two MCS AND of UEFI?

    Hello

    Thanks for the reply.

    As you have Windows 8 on your computer, there is no point on what you can not use Windows 7 installation. But, you can install Ubuntu in another partition and use it by disabling the UEFI mode and secure boot options.

    Let us know if you have any additional questions.

  • Windows 7 Pro 64-bit not start after the first update.

    Integrated system:

    Motherboard: Version of the BIOS Gigabyte GA-X58A-UD3R revision 2.0: FA

    CPU: Intel Core i7-930

    Memory: 6 GB Corsair PC3-12800 DDR3 Triple channel

    HD: Western Digital Black 500 GB SATA 3 Gb/s

    Water cooler: Corsair H50

    The operating system has been installed and running perfect. Readers for the mobo has been installed and and all is well. I can see everything on my computer, network, disks, programs, Device Manager and etc.

    First update for the system, only the important updates were downloaded and after the reboot, the system will not start. The system to start repairing the system but found no problem and restart again and return to the screen of system repair.

    The operating system has been installed 5 times and I had the same problem after the first update, the system unbootable. I tried to boot from the Windows dvd, but I had the same problem again.

    Can someone help me with this problem?

    Thank you

    M. Vilela

    Hi Danielle,

    In addition to the suggestion of Rock Star, you can try the following steps and check if it helps.

    Step 1

    You can first try to start the computer in safe mode and check if you can boot to the desktop. Access the link below and follow the steps to boot to the desktop. To boot to the desktop in safe mode keep tapping key F8 during restart. Once you see the option to start in safe mode select and press to enter.

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Step 2

    If you are able to boot to the desktop in safe mode, you can access to view the history of update on your computer and search for the error code and the updates that failed to install and post it back.

    To view the update history, follow the steps below:

    A. open the control panel (all items view) and click the Windows Update icon.

    B. click on the link to view update history.

    To view the details of a single Windows Update. Select and right-click on a Windows Update list, and then click details.

    Step 3

    I would say also allows you to perform a system restore in safe mode to see if you can restore the computer to an earlier date when it was working fine.

    To restore the operating system to an earlier point in time, follow these steps:

    a. Click Start, type system restore in the search box and then in the list click on the system restore program.

    If you are prompted for an administrator password or a confirmation, type your password or click on continue.

    b. in the System Restore dialog box, click on choose a different restore point and then click Next.

    c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

    d. click Finish.

    The computer restarts and system files and settings are back to the State they were in when the restore point was created.

    Access the link below to learn more about how to repair the operating system and how torestore configuring operatingsystem to a point in time earlier in Windows:

    http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

    I hope this helps. Let us know the results.

    Thank you and best regards,

    Srinivas R

    Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Bridge is no longer starts after the last update

    Hello

    After the last update of CC 2015.5 bridge will start is no longer. I get the window that shows that "Adobe Bridge CC unexpectedly quit' almost immediately. Of the window:

    Crashed thread: 0 dispatch queue: com.apple.main - wire

    Exception type: EXC_BAD_ACCESS (SIGSEGV)

    Exception codes: KERN_INVALID_ADDRESS at 0x000000000000000c

    Note the exception: EXC_CORPSE_NOTIFY

    Have uninstalled and reinstalled. preferences ransacked without success. I am running the latest version of the operating system. CC of other apps that I use (PS, I, ID) seem to work. 5 Bridge works fine.

    Any help would be appreciated.

    Thank you

    Ted

    Hi all

    We published a new version of Adobe Bridge (CC 2015) on July 19, 2016. This update is available via the Adobe Creative Cloud application.

    We addressed some crash bridge issues experienced on the launch of the application. Please try the new version and are looking for the crash problems you encountered.

    If you are not able to locate the bridge (CC 2015) on the creative cloud application, you will need to update the creative cloud application and restart your computer.

    Thank you

    Deepak Gupta

  • How to stop ringing? After I have send a message in my iPhone I get six beeps. It started after the new update

    When I send a message on my iPhone I have six beeps just once this has happened after the last update, how do I stop ringing? w

    Check the settings > sounds > text tones and make sure that the sound has not changed. Also, try a forced reboot. Hold down the Home and Sleep/Wake buttons at the same time for about 15 seconds, until the Apple logo appears. You won't lose anything.

  • CSSD was able to start after restarting the system

    I installed oracle11gr2 on Solaris Opteron, after the system restarts, asm instance started.
    SQL > startup
    ORA-01078: failure in the treatment of system settings
    ORA-29701: unable to connect to the Cluster Synchronization Service

    When I run $ORACLE_HOME/grid/root.sh as root:
    ......
    CRS is already configured on this node for crshome = 1
    Cannot configure two instances CRS on the same cluster.
    Please Unconfigure before proceeding with the configuration of the new House.

    How to unconfigure?

    ARO

    Good, your ASM is running. The next step is to make visible disks to ASM. ASM uses a string parameter of discovery to find the drive, and as you can imagine, they should be there. In addition they should be owned by oracle user and group dba so that ASM can mount them.

Maybe you are looking for

  • I want to buy a flash with lightning connector data storage.

    I want to buy a flash with lightning connector data storage. I'm between Transcend JetDrive™ Go 500 and iXpand SanDisk Flash Drive. What do you suggest me? Do you have another? My first priority is speed and iOS app use of data transfer.

  • Recommendations for a sim card (unlocked iPhone 4)

    Hi guys.    Yesterday, I bought an iPhone Unlocked 4 with a big scratch someone through Craigslist.     I bought it all simply because I want to use it when I travel in Thailand.     It is not the most recent and it is certainly not the prettiest, bu

  • I can't back up my computer on a disc?

    It is said to back up to disk so under him, he said network I choose the disk and arrow down and he says discount so I click it and it flashes to witch network is nothing I need to enable something or am I hurt thanks ibjeffur

  • Opening of session happening too often

    I have a HP Pavilion p6774y Desktop PC running Windows 7.  My PC requires I connect after only a very short period of inactivity.   And after I connect, I hear this annoying trumpet.  I had the laptop about 4 months, and this just started happening w

  • How to increase Mins to DateTime...

    Hello I have a date past say Sun may 24 18:40:00 GMT 2009 I have uncreated 10mins to this day... but unable to do so... Can someone pls help increarse the minutes in 10 minutes date... kindly help...