Vista will not start in Normal mode or safe.

Similar Questions

• Windows Vista does not start in normal mode

  My Windows Vista-based computer does not start successfully in mode noirmal upward. I restart and it is very slow. Finally I can connect and my come almost all my desktop icons. Almost. At this point, it seems frozen. Left click and it becomes totally frozen, including the white frozen screen Milky wit the icons in a blurred background. At this point, I can nothing but disable it at the tower. Restore the system to an earlier point has failed. Any ideas?

  See...

  My computer is slow!

  http://miekiemoes.blogspot.com/2008/02/help-my-computer-is-slow.html?

  List of troubleshooting for a slow computer

  http://www.bleepingcomputer.com/forums/topic44694.html>

  What to do if your computer is running slowly

  http://www.malwareremoval.com/tutorials/runningslowly.php>

  04/12 / 1107:23: 14:00

• Windows XP does not start in normal mode or safe. Download page_fault_in_nonpaged_area error message. Any help or suggetions? Thank you.

  It seems that the boot sequence is just circling himself. No matter if I try to start XP normally or in Safe Mode I go back to the screen that ask you how I want Windows XP to open. Any help would be appreciated.

  Hello Michael,

  Often, we see crashes as a result of a program from loading at startup. To solve these, we use the clean boot troubleshooting. The following describes this process: http://support.microsoft.com/kb/310353 http://support.microsoft.com/kb/316434

  Best regards

  Matthew_Ha

• Vista could not start in normal mode and the relocation of scores of hidden factory settings also failed.

  NOTE: THE PROBLEM WAS MY POWER SUPPLY WAS LOW, NEW POWER ADAPT SOLVED MY PROBLEM.   Read more if you are interested in what happened prior to my tent a different power adapter.

  Original title: vista 32 does not start

  After a reboot could enter the mode safe mode with internet connection.  able to restore good boot known beforehand.  But what normal start attempt would not start completely.  tried to reinstall from hidden factory partition.  07:34 minutes, the installation progessed.  then the machine stop.  When you restart get the message "error during installation, restart the computer, and then restart the installation."  When you try to start in safe mode, get error ' cannot install frrom SafeMode ".". "  I have no bootable cd.  to know about a 'platform of recovery' still tells CD also cannot install from this cd.   can I boot from a "devils of recovery" in safe mode and use the hidden partition to reinstall to factory settings as I tried the first time?  or do I need a full installation CD to get the machine to boot?   My question is should I at this stage of start-up during installation seems to have failed?

  as for what caused this problem?  I recently gave a USB external hard drive, but had not written for her.  did a chkdsk of the external hard disk without error.   When the problem was first happening, I removed the battery and the power cord of the acer laptop then pressed the power for 30 seconds to perform all memory the power button.  He got rid of a problem that I had been meet in which received start-up error message not "adapter acer". with battery removed, laptop power problems have disappeared.

  as the system is now, when I try to start everything now alt F10, I get a screen that reads "change windows startup options for: microsoft windows vista ' ' path: \windows\system32\winload.exe" "partition: 2" "HDD;". " d404533e' "[/ noexecute = optin /deteecthal]"

  When I press ESC the next screen "windows boot manager" bed "choose an operating system to stat, or press TAB to select a tool:

  Microsoft windows Vista (single choice)

  "to specify an option fo this choice, press F8."

  "Tools:

  "windows memory diagnostic"

  (diagnosis of memory showed no problem) by pressing TAB toggles between Vista and the diagnosis.

  I tried to boot with external USB hard drive connected and not connected.   the touch pointer was not working, but was erratic.   Sometimes, I could use a USB wireless mouse when it is started in safe mode.   recently the media player would not charge unless I restarted.  (before the system does not at all which is the theme of this original problem).

  When I try to start using f10, I get a screen that seems to ask for entry. the cursor is held after the detecthal of the line as below. What could of entry to enter the boot to continue?

  Winload.exe

  / noexecute = optin /detecthal

  me. surprised... the problem was that my power supply was low.   the adapter provided enough power for the laptop, most of the time.  but sometimes for laptop needs more power that the adapter could supply... so the laptop would be closed.   When I tried a different power adapter in a store, the fully charged laptop and my problem was solved.  lost a lot of time because I didn't know that the power supply was the problem!

• Vista will not start even in mode without failure or will start up repair help

  Hello everyone,

  I've been many problems with my OS recently (Vista 32 bit business) and decided to reinstall (it was really a last resort). The relocation went well, but in the end, he got the black screen with the extended cursor and didn't budge (I left it overnight).

  I forced to restart at the end of the day, and now it won't start, it just says loading windows and displays the logo of loading, but will not charge.

  Safe mode will start to load the drivers, but then freeze, leaving a permanent list of drivers and a "Please wait".

  I tried to boot from the Vista startup disk, who works the Startup Repair very well and running. The first time, he said he found problems with the boot files automatically and then asks me to click on "repair and restart. Once I do, nothing changes, it's always the same.

  I tried to run a further startup repair, but it does nothing, just scans and scans and scans... but can't find anything in the newspaper (it is not passed the crawl log entry).

  I can access the features on the disc to start very well, so I ran guest and drive a DSKCHK (read-only), but again it froze in the third part.

  As far as I know all my hardware works fine, and a diagnostic scanning don't tell something abnormal.

  ... any ideas?

  Enjoy your time,

  Chris.

  Hi Chris,

  This resembles the faulty Ram or a hard drive does not properly, even if the systems on board diagnosis cannot capture an error!

  Of what you sayed I recon, it is a hard drive error more defective ram, try rerunning DSKCHK and see if it stops on part III, once again, if the fact, its probably your hard drive! Maybe someone else has a similar thought?

  Hope this helps with your problem.

  Jon

• Windows Exployer will not respond in 'Normal Mode', in 'Safe Mode' or in 'clean boot '. "Fix it" even does not work. How can I fix this problem?

  Windows Explorer does not work in 'normal', in "Safe Mode" Mode or in "clean boot".  Same 'Fix it' does not.  How can I fix this problem?  I have Win 7, 64 bit.  Thank you.

  Hello

  1. do you receive any error messages?
  2 has there been any changes made on the computer before the show?

  Method 1:
  If this solves the problem, you can run check and the (SFC) System File Checker tool. SFC scan would be a system file corrupt on the computer search and replace.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 2:
  If the problem persists, you can create a new user account and check if the problem still persists.

  Create a user account
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If the problem is resolved in the new user account, you may have corrupted profile.

  Here is the link for troubleshooting a corrupted profile, you can follow the steps mentioned in the link.

  Difficulty of a corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Method 3:

  If the problem persists you can scan your computer anti-virus using the Microsoft Safety Scanner.

  Microsoft safety scanner will help us to get rid of software viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Warning: If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.
   
  I hope this information helps!

• Fire Fox does not start in normal mode and safe

  I had tried to start Fire Fox on safe mode, but do not start.
  I tried to re - install Fire Fox, but do not start.

  Crash ID: bp-d9bea701-7338-4634-9141-b97182131005

  Bp-d9bea701-7338-4634-9141-b97182131005 ID crash shows that Firefox crashes both KERNELBASE.dll and BitGuard.dll

  Since Firefox hangs in Firefox Safe Mode , I would start by founded BitGuard uninstall of the following:

  • http://filedennis.WordPress.com/2013/09/16/what-is-BitGuard-exe-and-BitGuard-dll/

  See also:

  • Fix Firefox problems caused by malicious software

• my computer only works in safe mode and will not start in normal mode I have no virus, what could be the problem

  I get the blue sreen with theses messages
  0 x 0, 00000000 00000001

  I get the blue sreen with theses messages
  0 x 0, 00000000 00000001

  I don't know what your problem is, but I would point out that when you say "I have no virus", you could very well be wrong

  No antivirus program is perfect, and the more popular (Norton and McAfee) are among the worst. Just because they do not catch something doesn't mean you're not nfected.

  In addition, more virus there are other types of malware, such as spyware, and even if you have no virus, you could be infected with spyware.

  For an anti-virus program, I recommend eSet NOD32, if you're ready
  to pay for it. If you want a free anti-virus, I recommend one (do not run more than one) of the following three:
   
  Avira AntiVir
  Avast
  Microsoft Security Essentials
   
  You also need anti-spyware software (even if you run a program like Microsoft Security Essentials, with anti-spyware feature integrated into it). I recommend that you download and
  install MalwareBytes AntiMalware (freeware)

• Vista will not start! Black screen, no mouse, no cursor pointer. Startup Repair cannot repair. Details say 'wrong pass '. What is the correct syntax for pkgmgr to uninstall?

  Vista will not start!  Black screen, no mouse, no cursor pointer.  Startup Repair cannot repair.  Details say 'wrong pass '.  It looks like all the files are well intact on the disk.

  What is the correct for pkgmgr syntax when you try to uninstall an update by using a command prompt when starting Vista OS disk?  I entered the following in the "x:\Sources >" prompt:

  start /w pkgmgr/o: "C:\; /Up:Package_1_for_KB2840149~31bf3856ad364e35~x86~~6.0.1.0 C:\Windows.

  When I run this command it ends quickly and when I run 'echo %errorlevel%' I get '5', which seems to mean 'access denied'.  How am I supposed to have access to remove the patch?  Am I missing something?  Perhaps a switch in the syntax to access?  Help, please.  Thank you.

  I tried both options that you recommended.  As initially stated, no boot option would produce something other than the black screen.  I tried to boot from a drive and restoring the system running, but she didn't, and when I tried to do it again the recovery console could not find restore points. ?.

  An update, the computer is now fixed.  Oddly enough, I ran recovery of starting a drive at least 8 times and each time I checked the details and he said: he ran chkdsk without error and return to the same cause "a patch is preventing windows to start.  I even ran chkdsk c: /f from a prompt command from the recovery disk and it found no errors.  That's when I posted the question above after trying to remove the patch in the manner described above.  After some time and frustration, I decided to run chkdsk /r c:.  It took awhile, but it found 1 bad sector, moved the data, the bad sector tag and finished.  Once I restarted from that, everything came and went very well.

  So, the original question remains, what was missing in the command to run pkgmgr/high: successfully.  And the new question exists as to why start Recovery claims run chkdsk if it does not, or he turns the version/f not the version/r the same as I did manually?  It would be good to know for the future.  Thank you!

• "Error message: Verifing DMI pool Data data ', 'Boot from CD' and Vista will not start.

  Vista will not start. Yesterday I had a remote assist of a tech trade SPS who took several Java updates and installed the recommended Java version. Until I left work the day I closed my computer so that he could install the updates from Microsoft. After the updates were finished I he turned and left for the day. When I arrived this morning, I had was a black screen and 2 lines of text following: 'Verifing DMI pool data' and 'Boot from CD' and a cursor flashing beneath them. I downloaded and executed a Western Digital utility that showed no problems with the hard drive, put in on the installation disc repair service is no error. I did a system restore to a point since yesterday morning, and Vista still does not start. Any ideas or suggestions?

  Hi JohnHorky,

  Step 1:

  First check and make sure that all physical connections on the computer are correct.

  Step 2:

  Alternatively, you can try to run a Checkdisk and check.

  a. Insert the installation disc.

  b. restart your computer.

  c. click on the Start button, click the arrow next to the button lock and then click on restart. If you are prompted, press any key to start Windows from the installation disc.

  d. choose your language settings, and then click Next.

  e. in the System Recovery Options menu, click command prompt

  f. at a command prompt, type the following command and press ENTER

  Chkdsk /f /r X: (drive letter)

  Note: When you run the checkdisk, there are risks of data loss you can take a backup before starting the checkdisk.

  g. press y when you are prompted to check the drive the next time the system restarts.

  h. close all applications and restart the computer.

  Note: When you run the disk check, there are chances of losing data if you can take a backup before starting the checkdisk.

  Step 3:

  Check if the automatic hard drive in the BIOS (Basic Input/output System) is enabled and save settings and check if it works. If it doesn't, contact the manufacturer of the system for more support options.

  I also suggest that you install the latest update of the basic system of input/output (BIOS) on the computer by contacting the manufacturer of the computer and check if it helps.

  Important: Change to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Hope this information is useful.

• Satellite P300D-110 will not start up normally

  My P300 - 100 d will not be running normally.

  It crashes after the ad that Windows is starting.
  Firstly I have to boot in safe mode, and if I'm lucky it will start normal after choosing "restart".

  The strange thing is that this problem appears only after that the laptop has been stop for awhile.
  If I start shortly after a stop, there seems to be no problem. I use Windows Vista Home Premium SP1.

  Someone at - it an idea?

  TNX in advance!

  It is a strange question.

  Did you look in the event viewer? Maybe you can see something on this issue.

  In addition, I would like to make a BIOS update.

  Sorry that I can't give you more advise, but in his case, it is not easy to say what the problem is.

• Why I can't get online in safe mode with networking? Does not start in normal mode.

  I can't get my computer starts in normal mode.  It starts only in safe mode.  I can choose the mode safe mode with networking so I can get online, but that's all... just safe mode.  Can I do to solve this problem?  I don't have a lot of money and a new computer is not an option at the present time.  Any help out there?  I have also no sound.  I tried to reinstall my windows xp, but it won't let me.  I have XP Pro and SP3.

  Hello splunk2011,

  Please contact the Microsoft Answers forum with this problem!

  After reading your post, my understanding of the issue is that you are unable to start in Normal Mode and as such, cannot be online within Mode safe mode with networking.

  Because we can start in Mode safe mode with networking, this tells us that a driver or a program from loading at startup may cause the problem.  To solve this, I would try a clean boot.

  More details about this is located at the following link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Let us know if this helps solve your problem.

  Best regards

  Matthew_Ha

• my computer does that in safe mode, it does not start in normal mode, my Security Center opens not or my updates of the widow.

  Hello

  my computer has stopped working on normal mode. I have to use my computer on safe mode.

  My Security Center lights.

  Windows dates won't turn on.

  I think having a consistency of disk.

  Can someone help me?

  Hello

  1. what exactly happens when you try to start in normal mode?

  2. do you receive any error messages?

  3. don't you make changes to the computer until the problem occurred?

   

  Method 1: Perform a system restore

  To get the procedure perform system restore, open the site mentioned below

  http://windows.microsoft.com/en-US/windows-vista/What-is-System-Restore.

  Method 2: Perform a clean boot in safe mode

  For the procedure to place the computer in a clean boot, open the site mentioned below

  http://support.microsoft.com/kb/929135.

  Note: To set the computer back to start normally, use the step 7 in the same link.

   

• Satellite A300 Vista - will not start cd/DVD with backup

  Hello world

  I have a big problem with Toshiba a300. Windows Vista is not starts.

  Watch only the menu with 2 options: first "fix the system" - when I choose this option 10 seconds later I see messeage: click OK to turn off the computer.
  When I choose the second option in my laptop restart every time.

  I tried after turning on the computer, press F8, but all the option in this menu do NOT fix the problem.
  I have no CV/DVD to my computer.
  After the first time I don't burn DVD with backup.

  I have really now how can I install system with recovery patriction. What softwere I need and how do I do it?

  Thanks for help

  Hello

  Sat A300 and other new models of laptops are equipped with HARD drive recovery option. This HARD drive recovery should allow you to recover the laptop without the use of all disks.
  In order to start the procedure for HARD drive recovery, you need to press F8. Then choose the first option called fix my computer. Then new window pops up and there you have to choose Toshiba HDD recovery. All that s.

  But if this procedure don't work (no matter why) then you will need to use the Toshiba recovery disc. If you n t create a floppy disk for recovery of a hand and the laptop will not start, then you will have to buy a drive for recovery of this page:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye

• Vista will not start. Verifying the integrity of system files and repair has no ErrorCode = 0 x 2 HELP PLEASE!

  ASUS PC, Windows Vist Home premium, all updates.

  Out of the blue, it will not start.  Access the start scrolling (the one just before logon) screen and it just stops.

  Twice I ran Vista check utility.  The first time, I chose to do the system restore to previous state.  Restarted.  Always off.  The second time, it took much longer and from what I can see.  All TESTS PASS, except one:

  Repair action: repair and checking of the filesystem Integrety

  Result: failed. Error code = 0 x 2

  Time required: 6206818ms

  I get no blue screen, I can't even any screen!

  I'm triying to repar because I have several costly software titles that link the authorization key code to a key hardware and software installation.  I don't know that I could reinstall if I get a code (randomly?) different generated software.

  I don't know about i-tunes and other content downloaded my wife has such as MP3 files and audio books.

  Thanks for any help!

  The test fails (SFC) checks for corruption in the files on your system.  If she can't even complete, she suggests the Vista all system needs to be re-installed - but you have already done this and you still have the problem.

  In fact, look like a hardware problem.  Here are some troubleshooting guidelines hardware that can help (but probably not for this question as what you really need, it is a replacement for test):http://elephantboycomputers.com/page2.html#Hardware_Tshoot.  Frankly, I think it's time to take the system to a repair facility of good reputation for the service computer (or to return to the manufacturer for repair - costs, schedule, guarantees and make a decision).  I don't know what hardware component.

  If you can, try to back up your data before you import it it because they will probably wipe the drive clean during the process. You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (perhaps done on another computer).  This should give you enough access to the system (if you do not have any other means) to backup your important data.  Otherwise, try slaving the drive to another system and access the data in this way.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.