Vista Windows Media Player; cannot get songs burned on a CD to play in the desired order in the car drive

I have several CD of music that play in the drive of the car in the order I put them into the burn list/list of reading.  Now, I have a CD that plays in its agenda, and I can't understand how that is wrong.  The CD plays ok on my PC...

Hello

 

1. you try to create a MP3 or Audio CD format?

2. what happens when you tried to edit the order before you burn the CD?
 
I suggest you to go through the link provided below.

Burn a CD or DVD in Windows Media Player
 

Windows Media Player playlist: frequently asked questions

Provide the link below and refer to the section change the settings for ' add a list of all files burned disk to format;

http://Windows.Microsoft.com/en-us/Windows-Vista/change-settings-for-burning-a-CD-or-DVD-in-Windows-Media-Player

 
I hope this helps.

Tags: Windows

Similar Questions

  • My Windows Media Player does not automatically recognize when a disc is placed in the disc drive.

    My windows media player does not automatically recognize when a disc is placed in the disc drive. I have to put the disc in the disc drive, and then close windows media player, with the disc in the disc drive already, then re-open windows media player. Reopened WMP with the disc in the disc drive, it recognizes the disc in the drive. It then functions well until I need to change the disk at this time I have to start the reboot stop of WMP. This problem has not allways exists just started a few months ago. Thanks for any helpful information.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs

    http://support.Microsoft.com/kb/982116

    In addition,

    When you insert a CD or a DVD, Windows Vista may not recognize the disc

    http://support.Microsoft.com/kb/939052

  • In the error message is Vista "Windows Media Player cannot play the file, might not support the codec used to compress the file.

    It worked very well what place please?

    * original title - Window Media Player cannot drive cannot read the file the player could does not load the file or may not support or does not support the codec used to compress the fichier.*

    Hello

    1. what changes have been made to your computer before the problem?
    2. the problem occurs on a particular file?
    3. What is the format of the file you want to play in Windows Media Player?

    You may encounter this error message for the following reasons:

    (a) the file type is supported by the drive, but the file was compressed by using a codec that is not supported by the player.

    (b) the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

    Windows media player will play only the files and videos only if it supports this type of file.

    Please see the bottom of the article that gives you information on the types of media files that supports Windows Media Player.

    http://support.Microsoft.com/kb/316992

    If the files are not supported by Windows media player, then you will need to use a few players from third party that supports this file format.

    WARNING OF THIRD PARTY SOFTWARE

    Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    See the link below for more information on the codec.

    Codecs: Frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  • Recently I have not been able to burn a CD with Windows Media Player: I get an error message: "Windows Media Player cannot find the file."

    Hello

    I recently haven't been able to burn a CD with Windows Media Player (he worked last week, but not now). I get an error message "Windows Media Player cannot find the file. The link between the library item and its digital media file associated with may be broken. "Try to fix the link or delete the item. There is a web help option which says that to fix a link, you click on the blue icon next to the item, then click "Browse this article. But the only icon I see is a little blue triangle next to individual songs in the library pane or list, there is no icon next to the name of the playlist. Although the click with the right button on the blue triangle gives me a few options, "Browse this point" is not one of them. Does anyone have any ideas what is wrong and how can I sort it please!

    Rick

    original title: burning a CD problems

    Hello


    (1) what version of Windows Media Player do you use?
    (2) what is the model of your CD burner?
    (3) you have the latest drivers for the CD burner?
    (4) what type of file you are trying to burn?
    (5) you receive error codes?
    (6) what version of the operating system is installed on the computer?
    (7) we get to a particular file?
     

    Method 1: You can try to update the drivers of your CD burner visit the manufactures Web site.
     
    Method 2: You can try to remove the CD, and then insert another CD and try to burn another file and check if the problem persists.
    I hope this information helps!
  • Unable to play the song or burning CDs in windows media player 11 error message: "Windows Media Player cannot find the file.

    Original title: the windows media player 11

    I have the media player 11 and my operating system is XP Home Edition, but for some reason, when I try to play a song or burn it to a CD, this is the error message I get.  Can someone help me with this?

    Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted. reason for which each song I ever download from the internet is going to play is no longer...

    Thank you.

    Hi NancyCamper,

    ·         Have you made changes on the computer?

    Follow these methods.

    Method 1: Follow the steps in the article.

    Resources for the resolution of problems in Windows Media Player

    http://support.Microsoft.com/kb/843509

    Method 2: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Start, run.

    (b) type msconfigand click OK.

    (c) the System Configuration Utility dialog box appears.

    (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

    (e) when you are prompted, click on restart to restart the computer.

  • Cannot retrieve the songs to a cd error "Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted. »

    Oriiginal title: can not extract the songs from a cd

    I have problems ripping the songs from a cd in my windows media player library. Whenever I click "Rip CD" this message "Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted. "How can I fix it?

    Hi littleprincess54,

    (1) have you checked with diffΘrents CDs?

    (2) since when are you facing this problem?

    Method 1: Run the troubleshooter in Windows Media Player settings and check if that makes a difference

    Open the troubleshooting Windows Media Player settings Troubleshooter

    http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

    Method 2: Change the location of Rip. see the steps mentioned in the link

    To change rip settings in the Options dialog box

    Method 3: You can follow the steps mentioned in the link below that relates to a similar question

    Windows Media Player error C00D1197

    http://Windows.Microsoft.com/en-us/Windows7/C00D1197

    Thanks and greetings
    Ajay K
    Microsoft Answers Support Engineer
    ***************************************************************************
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error Windows Media Player cannot play the CD. The disc may be dirty or damaged. Turn on error correction and then try on Vista 64-bit

    Original title: Windows Media Player, playing only half of the first song on cd and rest jump

    I have Vista 64 bit on my computer, I have WMP 11.  When I put the CD in the player it loads correctly, gives me the titles and others and will start playing the first song.  To halfway through it stops and for the rest of the CD, he crosses and put an X next to them then this error message is displayed:

    Windows Media Player cannot play the CD. The disc may be dirty or damaged. Turn on error correction and then try again.

    I tried to turn on error correction, but it didn't work, it was not available in the reading section.  How can I get the cd to play?  I tried a lot of different cd and they all do the same thing.  I have the same problem in Itunes as well.

    Hi Brian21777,

    (1) since when are you facing this problem?

    (2) remember to make changes to the computer?

    Method 1: You can see the steps by Karena R, in the link below that relates to a similar question:
    http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/8e35a984-D302-48c9-bf3c-a687d1546cd2

    Method 2: Download and install all available Windows Update
    Install Windows updates

    Method 3: Make sure that your DVD drivers are up to date; see the link below
    Manually update the drivers

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer
    ***************************************************************************
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I get the message Windows Media Player: "windows media Player cannot find the file.

    I get the message Windows Media Player: "windows media Player cannot find the file. The link between the library item and its digital media file associated with may be broken. To solve the problem, try to fix the link or delete the library item. "When I try to record several songs. I can play the songs so I don't know what link is broken. The problem started after I tried to play a CD using Nero Essentials. I have since uninstalled Nero from my computer but I still have the error message and can not burn a CD.

    Hello

    Step 1: Change the media files are automatically added to the library when played.

    (a) click the arrow below the Library tab, click More Options, and then click the Player tab.

    (b) to prevent media files on your computer or the Internet to be added to your library when you play, delete media files add to library when played check box.

    Step 2: Also rebuild the database of windows media player.

    Follow the steps in http://support.microsoft.com/kb/925718

    See also http://www.microsoft.com/windows/windowsmedia/player/webhelp/default.aspx?&mpver=11.0.5721.5260&id=C00D10BA&contextid=89&originalid=C00D10BA

    Diana

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete.

    Original title: CD corrupts and burn it

    When I go to burn a cd with the music on this topic in windows media player, it starts very well. When it gets to 70-80% it stops and a window opens with this message.

    "Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver. »

    There is nothing burn but these files. I made sure there was nothing waiting to be burned. I closed all the other windows. I lowered the speed at which it burns. Nothing works I've looked up online. WMP is updated too.

    I can burn files very well. Photos and documents, I have a problem with. It cannot therefore the CD burner (not completely, anyway). I can listen to the songs on the CD where it suddenly stops.

    If anyone has had this problem, a solution would be greatly appreciated.

    Thank you

    Hi Cory,.

    This problem can also occur when your computer correctly detects the disc as a non-recordable device. Make sure that the registry key is set correctly for DVD player.

    CD - R or CD - RW drive is not recognized as a recordable device (valid also for Windows 7 steps)

    http://support.Microsoft.com/kb/316529/en-us

    Registry warning

    To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    http://support.Microsoft.com/kb/322756/en-us

    How to back up and restore the registry in Windows

    I hope this helps.

  • "Windows Media Player cannot burn the files to CD" error while burning a CD

    My Windows Media Player says "Windows Media Player cannot burn the files to the CD. Check that the disc is clean and not damaged. If necessary, select a slower recording speed or try a different brand of blank discs.  I have burned several CD from Windows Media Player in the last year.  I used different brands of CD, since I first saw this message, but it continues to give the same message.  Whenever the burner starts to burn, I get this message.  What is the problem?

    Thank you for answering my question.   I understood the question.  In the burning options, there is a tab file types.  For some reason the appropriate boxes are not selected.  The burning process has led me to believe that I had a problem of burner or CD, while he was in fact the options.  Thank you once again.

  • Error: "Windows Media Player cannot find the file. If you try to play, burn, or sync an item that is in your library, the element can point to a file that has been moved, renamed or deleted'

    Original title: laptop won't read the music files stored on external hard drive

    I have an old Compaq laptop Windows XP, so it was out of memory I transferred everything on a Portable Seagate (500 GB) hard drive and started to access it. It's worked well for over a year, but lately, began to stop playing my music files. Absolutely everything on the hard drive opens, however, images, files and folders, but when I go into Windows Media Player, it pops up with this error message:

    Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted.
    I have not modified parameters or anything that moved. I used to be just able to restart the laptop, or disconnect and reconnect the hard drive and it works again, but now it or not will be not at all, or it will cut off half way through a song and then not to play anything more.
    I can't find any support for this problem because the phone reads that the hard drive is there, and everything else works. Only the music doesn't. I tried to play music on a connected USB and it works fine. I'm so confused!
    Hi lkm0293,
     
  • Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted.

    Lately I get the following message if poster every time that someone sends me an email with an attachment. I use to be able to display up to a few weeks before. the message is - Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted.

    Does anyone have an idea on how I can display these attachments?

    Thanks for your help.

    Hi fredleon,

    · What is the email client or webmail you are using?

    · What is the attachment file extension?

    · How do you open the attachment?

    · Is it by double-clicking or you choose open with option.

    a. save the attachment to the office,

    b. right-click on the file and select open with the option to open the attachment according to their file extension.

    Example: If the .docx file extension, then it is word document or .pdf, it's Adobe.

    You can get the extension of a file by right clicking on the file and go to properties

    With regard to:

    Samhrutha G S - Microsoft technical support.

  • When I was burning blank CD in Windows Media Player, I received this error "Windows Media Player cannot find the file."

    When I burn my blank cd in windows media player, that he was just came.

    Windows Media Player cannot find the file. If you try to read, burn or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted. And I click on help, then said: error cood1197

    original title: How can I fix the error cood1197

    Hello

    Did you change your computer?

    I suggest you check out the link and check (which also applies to windows vista).

    Windows Media Player C00D1197 error

    http://Windows.Microsoft.com/en-us/Windows7/C00D1197

    I also suggest you to see link and check.

    Solve problems in Windows Media Player http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-problems-in-Windows-Media-Player

  • Error when you try to burn a CD: Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver

    Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver. ???

    I just burn a CD with no problem at all.  Using the same type of CD, brand new, I tried to burn another CD and got this error message:

    Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver.

    I close all programs running, restarted my computer, changed on the devices tab, the speed of burning... everything I know to do and all the things I've read in these forums, no luck... still get the exact same message.  No idea why my CD-writer has decided to stop working for me?

    Hi Cierrajade,

    1. you have any third-party DVD burning software installed on the computer?

    Method 1

    You can use the convenience store open playing and burning CDs, DVDs and Blu - ray discs built in Windows 7 and check to see if it helps you to trouble the CD plays the questions.

    For more information about how to open the resolution of problems in Windows 7, go to the link below and follow the steps.

    http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-and-burning-CDs-DVDs-and-BluRay-discs-Troubleshooter

    Method 2

    If you have any third party CD\DVD software installed on the computer of engraving I suggest you uninstall and check back later if you can burn CDs with success.

    Disc burning: frequently asked questions

    http://Windows.Microsoft.com/en-us/Windows7/disc-burning-frequently-asked-questions

    Method 3

    If the previous step fails, check if you can burn CDs using Windows Explorer

    Burn a CD or DVD in Windows Explorer

    http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows Media Player cannot find the file. 'If you try to play, burn, or sync an item that is in your library, the element can point to a file that has been moved, renamed or deleted'.

    Original title:

    Problems with rip audio CDs with windows media player

    Bought the CD now 82 and try to tear with the windows media player player, but keep getting the message "Windows Media Player cannot find the file. If you try to play, burn, or sync an item that is in your library, the element can point to a file that has been moved, renamed, or deleted." What should I do to rip this cd please did tear previously no probs, but now seems to have a problem

    Thanks in advance

    Anne

    Hello
    1. You did changes to the computer before the show?
    2. Are you able to extract other CDs using Windows media Player?
    3. What is the file format of the file you are trying to extract?
    Method 1:
    Step 1:
    You can run the Windows Media Player Library convenience store & check if you are able to rip CDs.
    Step 2:

    Open the troubleshooting Windows Media Player settings Troubleshooter

    http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter


    Method 2: Rebuild the windows media player.

    exit Windows Media Player.
    b. click Start, type %LOCALAPPDATA%\Microsoft\Media Playerand then click OK.
    c. Select all files in the folder, and then click delete on the file menu.

    Note:
    You don't have to remove the folders that are in this folder.
    c. restart Windows Media Player.
    Note:
    Windows Media Player automatically rebuilds the database.
    If this does not resolve the problem, disable the Windows Media Player database cache files. To do this, follow these steps:
    exit Windows Media Player.
    b. click Start, type %LOCALAPPDATA%\Microsoft, and then click OK.
    c. Select the Media Player folder, and then click delete on the file menu.
    d. restart Windows Media Player.
    Note:
    Windows Media Player automatically rebuilds the database.

    Method 3: Disable and enable the windows media player. Follow these steps:

    a. open the Control Panel from the Start menu.
    b. open programs and features in Control Panel .

    Note: If the programs and features are not available, change the view by large icons at the top right of the control panel.

    c. Select Windows turn on or off features in the left column of the window programs and features.
    d. click on the plus sign next to multimedia functions.
    e. uncheck Windows Media player and then click OK. (You may receive a warning message. Click on the Yes button.)
    f. restart your computer.
    g. to reactivate the Media center follow the same steps and place a checkmark for Windows Media player.
    h. click on the Ok button.


    i. restart your computer.
    Reference:
    Method 4:
    Change the location of Rip. see the steps mentioned in the link
    given below:
    To change rip settings in the Options dialog box

    http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-ripping-music
    I hope this helps!

Maybe you are looking for

  • Transparent BG involved Keynote

    When I have the BG in Keynote, assign the value 0% fill of a color some transitions are acting strangely. (I do this for export sequences from Keynote to QT with a transparent BG). Specifically, during a 'dissolution' images of the next slide just ap

  • Toshiba A30 restore factory settings

    pretty stupid question, but I need to restore factory settings, does anyone know how to do?Ive tried the system restore forest and it goes back only to a certain pointI don't know what else to do?

  • Satellite L30-101: System indicates the value of memory bad

    Hello I hope someone can help. Just bought the L30-101 with Vista Home Basic and 512ram (ddr2 pc2 4200). The specs say it can take up to 2 gig with a max of 1 gig per slot. Site of Crucial ram and there memory Advisor tool used for a stick of compati

  • How to remove the photos from the event?

    My IMac says that the tax Turbo I download only readable and said that not enough volume, what should I do? is the pictures I imported my camera take too much space? These photos to receive in the event and the Photos, so I need to delete the event,

  • How to restore examples by default after accidentally remove/change?

    Hi all I have modified the examples directory of NEITHER and to restore the original files. Is it possible to do? Kind regards Gagan