Visual Basic 2010 Express froze on installation

Similar Questions

• Windows 7 and Visual Basic 2010 Express

  Debugging a VB program error reads:

  The main reference 'OPCControls, Version = 2.0.0.0, Culture = neutral, PublicKeyToken = 09c594780a8fc3e6, processorArchitecture = MSIL' cannot be resolved because there indirect dependence on the assembly of infrastructure 'System.IdentityModel, Version = 3.0.0.0, Culture = neutral, PublicKeyToken = b77a5c561934e089' which cannot be resloved in the currently targeted framework.  «NETFramework, Version = v2.0» To resolve this problem, remove the reference "OPCControls, Version = 2.0.0.0, Culture = neutral, PublicKeyToken = 09c594780a8fc3e6, processorArchitecture = MSIL", or retarget your application to a version of the framework that contains 'System.IdentityModel, Version = 3.0.0.0, Culture = neutral, PublicKeyToken = b77a5c561934e089'. FMS

  It's the mistake of generation who came.   I don't know what I have to load in order to obtain communication of OPCControls to work in this VB program.

  The platform of Windows 7, Microsoft Visual Basic 2010 Express is currently loaded.  (64-bit system)

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• I am trying to download and install visual basic 2010 express, it does not

  I tried to download and install visual basic 2010 on my XP, but can't

  It promts to restart the computer before it is through installation modules, then it does not work after that

  I discovered a problem with my system

  I went to add/remove programs in Control Panel, removed ver 1.1 and ver 2.0 .NET

  downloaded and installed the .NET 4.0 worm, it worked, older versions have disappeared and the 4.0 was on the list of programs

  the thing is that I restarted and .NET 4.0 worm disappeared, and the ver 1.1 and version 2.0 of .NET were back

  I can't understand it, I need the opinion of experts on this issue

  I thought about the restoration but it is disabled

  Hello

  I suggest you post the question in the forums and check them off below if it helps:

  http://social.msdn.Microsoft.com/forums/en-my/VSSetup

  It will be useful.

• My Visual Basic 2010 Express application - 'windowsapplication1 has stopped working ".

  Hi guys,.

  Next week, my 11 year created with visual basics project is due. My program is complete and works perfectly when debugging. However, we hand upward like a file executable/installation files + project. Only problem is that as soon as I try to install my program, he stops at the splash screen and displays "windowsapplication1 has stopped working" instantly. I tried it on several computers and failed on all three. They were running Windows 7 (Home Premium x 64), Windows 7 (Enterprise x 86) and Windows 8 Pro x 64 which all .NET 4 nave installed.  I'm new to this so if you need more information, ask if you please.
  See you soon,.
  Daniel

  Hello

  You should report this issue in the Visual Studio Forums: http://msdn.microsoft.com/en-us/vstudio/aa718325.aspx

  Additional information.

  Troubleshooting Visual Basic Express: http://technet.microsoft.com/en-us/subscriptions/ms172574.aspx

  Thank you.

• How to get a registration key for Visual Basic 2010 express after 30 days

  aid goes to the web page, but none touch

  Hello

  I suggest you to contact the Microsoft Customer Service Activation and product registration service to get more help.

  How to find a phone number for a Microsoft Product Activation Center : http://support.Microsoft.com/kb/950929

  Activation and registration of a Microsoft product: http://support.Microsoft.com/kb/326851

  It will be useful.

• Could I create a program of video game with visual basic 2010 express?

  I want to know if it is possibel to create a videgame program with this

  I want to know if it is possibel to create a videgame program with this

  http://www.YouTube.com/watch?v=KaZf8ITRC9A

• Microsoft Visual Basic 2005 Express Edition Installation problems.

  I was trying to Visual Basic 2005 Express edition. It stops in the middle and gives me an error message: Visual Studio 2005 has a compatibility problem known with this version of Windows. And the Solution online is given as to install "Visual Studio 2005 SP1" and "Visual Studio 2005 SP1 update for Windows Vista and Windows 7". I could still run the installation and fill it. But when I start the Visual Basic Express Edition the above error message is copied.

  When I tried to install above two 'VS80sp1-KB926601-X 86 - ENU' and "VS80sp1-KB932232 - X 86 - ENU", I get the error message "the upgrade patch cannot be installed by the windows service install because the program to be upgraded is may be missing, or the upgrade patch may update a different version of the program." Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch. »

  Anyhelp that will solve my problems above is greatly appreciated.

  Thank you in anticipation - Kalyani Ch

  Hi Katou Ch,

  Thank you for visiting the Microsoft answers community site. The question you have posted is related to Visual Basic and would be better suited to the Discussion Visual Basic groups. Please visit the link below to find a community that will provide the support you want.

  VB Forum:http://social.msdn.microsoft.com/Forums/en-US/category/visualbasic/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• No tool in my toolbox of visual basic 2010

  I had visual basic 2008 express. I do not use it for a while. Meanwhile, I had updates for .net framework. I guess an upgrade to .net framework 3.i agreed and he started to install. My system got stuck after about three hours. I turned off the system and restarted. Everything was fine. Even add / remove programs in the Control Panel, I could see that .net framework has been installed. Now, I have consulted with VB 2008 but there is no tools in my toolbox. One of my friends has suggested that uninstalling the version 2008 and VB 2010 Express installation may solve the problem. But even in this version there are no tools in the Toolbox. I searched the net for a similar problem. In that I found a software that could detect problems in .net framework. In the results, he has shown that .net framework 3 was not installed. But I also, .net framework 3, 3.5, 4.

  So is this a problem with .net or any other issue. Please help me

  Hi kotamrajusss,

  The question you have posted is better suited in the MSDN Forums. Please see the following link for more information.

  Category VB

• Visual Studio 2010 Express hangs after Windows Update

  June 11, 2010, I have 19 updates from Windows Update for my Windows XP Home SP3 Swedish (exceptionally many using the computer every day). After I rebooted, Visual Studio 2010 Express crashed at startup saying "(défini par l'utilisateur point d'arrêt-un point d'arrêt dans une application indique erreur de programme)." Re - installation of VS) did not help. Being run/scannow CFS does not report a problem any. Run the program in WinDbg, the program stops at a breakpoint in ntdll.dll. However, if I then go into the debugger program seems to operate normally. Also authorized the virus program Norton Internet Security (NIS) fails on startup with breakpoint in ntdll.dll. This should indicate that there was a problem with ntdll.dll, but all the tests that I ran to the DLL files are all problems. Other programs on the computer seem to work normally, including AVG 9.0 free virus checker, I installed to compensate for the NIS. NIS experts spent several hours in my computer without finding the reason. All clever out there who can help me?

  The problem is solved!

  I run the SDK Direct-X (latest version) in Debug mode and when I changed the retail fashion problems disappeared. Since there is no problem with Debug mode, before the updates of Windows, I guess that these updates were not compatible with debugging DLLs in the SDK. MS has probably forgotten to test in Debug mode or something. Instead however, annoying because the Debug mode is useful during the development of applications of DX.

• Problem installing Microsoft Visual C++ 2010 Express

  Recently I had difficulties installing programs. I'm on Windows 7 64-bit. Today, I tried to install Microsoft Visual C++ 2010 Express with disappointing results.

  I went through the installation, and it says that the program has been installed successfully. However, I could not locate the program to open it. I ran a search that returned no results. The start menu did not light up like it normally does when there are new programs. I looked in the start menu > all programs and there was a folder titled "Microsoft Visual Studio 2010 Express. The folder was empty.
  I went into C > Program Files (x 86) and I saw different folders containing additional files for the program. I finally found what I believed to be the program itself, "VCExpress." I double clicked and the start screen for the program came, followed by an error message indicating "folder data Application for Microsoft Visual C++ 2010 Express could not be created." I tried to run as an administrator, and the error message says "the application cannot start."
  If I try to re - install, it says that it is already installed. I uninstalled via Control Panel > uninstall program and re-installed several times with the same results. I had similar problems with other programs, and they all seem to be Microsoft programs.
  EDIT: The problem seems to have something to do with my AppData folder. When I go to C > users he's not here, but if I try to create a folder with that name, it says there is already a folder with that name.

  Hi Viteminj,

  Thank you to contact the community Microsoft and we will be happy to help you with your concern.

  According to the description provided, looks like you are facing a problem during the installation of Microsoft programs.

  He would be grateful if you can answer this question in order to help you further.

  1. have you made changes on the computer before this problem?

  2 are you getting any error message or error code during the installation of programs?

  3. how you try to install Microsoft Visual C++ 2010 Express using web download or disc?

  I suggest you to see the steps in the following Microsoft article and check if it helps.

  How to solve problems when you install or uninstall programs on a Windows computer: http://support.microsoft.com/kb/2438651

  Solve problems with programs that cannot be installed or uninstalled: http://support.microsoft.com/mats/program_install_and_uninstall

  Reference:

  Troubleshoot installing or uninstalling programs: http://windows.microsoft.com/en-IN/windows-vista/Troubleshoot-installing-or-uninstalling-programs
  There is place for windows 7 as well.

  Notes:

  Clean boot: once you have completed troubleshooting, perform the steps in the step 3: to reset the computer as usual.

  The following steps include changing the system registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Back up the registry: http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  Default folder Appdata is hidden I suggest you view the folder option and check if it helps.

  Reference: http://windows.microsoft.com/en-US/windows7/Show-hidden-files

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• help with quality report with the functions of Chapter 5 in visual basic 2010

  Public

  Class GradeReport Private Sub btnExit_Click (ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnExit.Click me.close() End Sub Private Sub btnCalculate_Click (sender As System.Object, e As System.EventArgs) Handles btnCalculate.Click Dim NumScores As Integer Dim average As Single Dim name As String Dim input As String Dim Count As Integer Dim total As Single ' get the number of students

  entry = InputBox)

  "How many students results of tests that you want to" & _ "Average?", "enter a value") If Not Integer.TryParse (input, NumScores) then return end if ' store the starting total values and County. "

  Total = 0

  Count = 1

  "The results of the tests. Do so until the County > NumScores

  entry = InputBox)

  _ "Enter the value of the test music" & Count.ToString, "Test points required')"

  Total += Total (input)

  Count += 1

  Loop ' calculate and display the average. If

  NumScores > 0 Then

  Average = Total / NumScores

  On the other

  Average = 0.0

  End If

  1stGradeReport.text = Average.ToString

  "Calculate and display the letter grade. If the average< 60="">

  1stGradeReport.text =

  « F »

  Elself average< 70="">

  1stGradeReport.text =

  « D »

  Elself average< 80="">

  1stGradeReport.text =

  « C »

  Elself average< 90="">

  1stGradeReport.text =

  « B »

  Elself average< 100="">

  1stGradeReport.text =

  "A" End If End Sub

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the MSDN Developer audience. You can get support for Visual Basic 2010 in the following forum.

  VB general forum:

  http://social.msdn.Microsoft.com/forums/en-us/vbgeneral/threads

  Concerning

• I'm download of visual studio 2010 express in iso format

  I download and open visual studio 2010 express, it downloads ok, but when you open Internet explore it opens the window and gives you connection message, when it connects it flashes on the screen and then close the window

  An ISO file is an image of a CD.  It must be burned using image burning software.  ImgBurn is free and easy to use.

  This file is not intended to be opened with Internet Explorer or any other application.

• I downloaded visual basic 2008 express. When I look at the code, it is invisible. Why? I need to make it visible to see and add more code.

  I downloaded visual basic 2008 express. When I go to view the code, it is invisible. I don't see it. I don't need to read, modify or add. I uninstalled, reinstalled 3 times and tried a fix without help. When I copy and paste the code that is invisible to a word document, then you see on the word document. Please someone tell me how to do to be able to see in the region of code in the visual basic application.

  Hello

  The question you have posted will be well suited in the MSDN forums. Click on the link below.

  http://social.msdn.Microsoft.com/forums/en/vsexpressvb/threads

• Get the key from Microsoft visual c ++ 2010 express license

  When I try to 'get a key to online check-in' for Microsoft Visual C++ 2010 Express my browser opens to

  https://profile.Microsoft.com/RegSysProfileCenter/Wizard.aspx?wizid=7c945c1b-D351-4F77-B526-36e696a413d7

  but then crashes...

  Please explain how to get a license key?

  Thank you

  David in London

  This is not the right forum for this question. You will need to contact MSDN page hanging when trying to get a SQL license key.

  http://msdn.Microsoft.com/en-us/subscriptions/aa948875.aspx

  Thank you

  Marilyn

• Como configurar esta application microsof visual c ++ 2010 Express program path: am files/microsoft Visual Studio 10.0 / commom7/IDE/vcexpres.exe

  Como configurar esta application microsof visual c ++ 2010 Express program path: am files/microsoft Visual Studio 10.0 / commom7/IDE/vcexpres.exe

  Hello

  See this page to select your language:

  http://support.Microsoft.com/common/international.aspx

  ====================================

  Or sorry that it is area English.

  On the top of this page click v (English) in the United States and set on your tongue.

  I hope this helps.