Visual Flight Path cannot be seen on the screen.

Just install FSX on Windows 7.  I check and checking all the relevant boxes on the Panel appropriate and tied up the news Nav 1 VOR, but I can't get any screen.  Any known problem?  Or am I missing something?

Flatcommissioncomau,
No doubt to update your video drivers, you should also check your other hardware drivers (audio, chipset, etc...).  You can clean boot of your system and see if that helps.

You can check with the forums of Games for Windows , because they have other specific information at stake.

Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • HP MSA2324i, new volume / LUN added, cannot be seen by the host ESX 4.1 (fine old LUN work)

    Hello

    I have a vSphere Essentials Plus 4.1 cluster that is connected to 2 x bays HP MSA2324i SAN, we have 2 x hosts and both can see current volumes / LUNS absolutely perfect (vMotion and migration of VM offline all work as expected). I'm starting a consolidation project virtual disks / volume of the San 2 x, however a new volume I created on a network SAN cannot be seen by the other host.

    The new volume has been implemented exactly like the others, but of course with a unique logic for mapping unit number explicit, but when scanning the iSCSI HBA the new LUN is never found :-(

    I was wondering if others have had also this happens to them and know why this may be implemented?.

    (This is a company that I joined, it's my third week, and that they had also no VMware subscription on their reunification since 2012, otherwise I would be to connect a call to technical support of VMware, by train to get the sub upwards and running)

    OK I think that might be the cause, I came across this recently maximum LUN ID is 255, change the logic unit to a number smaller than 255 ID number and try again, let us know how you go!

    vM

    -----------------------

    VCAP-DCD / VCAP-DCA / VCP-CLOUD / VCP - DT / VCP5 / VCP4

    -----------------------

    vMustard.com

  • PDFs with parts of the text have been highlighted, and now, suddenly, these docs print without the appropriate text highlighted. Never happened before. As seen on the screen, highlighting appears, but when you print, it's gone.  Help, please.

    PDFs with parts of the text have been highlighted, and now, suddenly, these docs print without the appropriate text highlighted. Never happened before. As seen on the screen, highlighting appears, but when you print, it's gone.  Help, please.

    Try to turn on the print with comments. The comments really are your strengths.

  • the attachment name is pale (without colour) and cannot be seen until the passage of the mouse

    The name of the file attached to an e-mail received can be seen clearly (it's not colored) until you move the cursor over the name of file, on the bottom bar of the e-mail message.
    It just happened for me to roll back the theme default "autumn reverie" that I installed last week, and the issue has been resolved. Always displayed, however.

    You'd better this post, do of the fall theme reverie. Thunderbird cannot predict and anticipate the other themes display text/context...

  • On Flight Simulator to use the flight path, you must click on the menu of the device. Where is he?

    Visual filght path is covered in the training centre in the title of the navigation. But I can't find any menu option aircraft.

    Hello

    1. you have the latest patches installed game?

    Follow these steps and check if they help.

    Step 1:

    Press Alt + Enter, and then press Alt again.

    Step 2:

    Remove the FSX. CFG and allow FSX rebuild the configuration file.

    Now check if the plane menu option is back.

  • 15-ro36tu HP: hp 15-ro36tu cannot perform mirroring of the screen

    I have a laptop hp with pentium core 15-ro36tu. I tried to connect it to my samsung smart tv, who says that he accepts the mirroring of the screen. So I tried projecting my laptop on the tv screen by going to the project, add a new device. But my laptop cannot detect sometimes. And when he somehow after many tests detect, it cannot connect to it.it says "YOUR SCREEN CONNECTION IMPOSSIBLE". I tried to connect it via another computer hp laptop and it connected instantly. I'm sure that my laptop is not working properly.plz hlp!

    I thank. But u did not understand my problem. I didn't connect using HDMI. I want it to connect using wireless, display which he supports.using HDMI port I was able to connect it.plz help me with the wireless display.

    Thank you

  • How to see the file path of each image on the screen of content?

    Hi, I'm looking at several, slightly different copies of an image on my hard drive, trying to figure out exactly which version I use. I want to know the path of file name for each picture, to help me make my choice.

    Can someone tell me how I can display the path filename of each image appearing in the content screen, another that in choosing "reveal in Bridge"? I would really like to see all the channels next to each image, so that I can compare.

    (I will certainly have to be better organized with my file name, metadata, release management, etc.).

    Thanks for any help,

    Cheers, Steven

    the path should appear at the bottom of the screen when you have a picture of a selected collection

  • cannot organize applications on the screen

    iPhone 6s - IOS 10.0.2

    change - something I can hold is no longer an icon of the application to move around on the screen?

    ALF593 wrote:

    iPhone 6s - IOS 10.0.2

    change - something I can hold is no longer an icon of the application to move around on the screen?

    No, it's always in the same way, may need to adjust how you hold on this application, so it wiggles, instead of the 3d button.

  • Satellite A100 - 510 PSAA2E cannot start - nothing on the screen

    Hello

    I had Satellite A100-510 (PSAA2E) since May 2006.
    2 weeks before, when I tried to switch the fans started spinning and the LED lit and after about 2 seconds, it restarts without showing anything on the screen.

    There is also no beeps or anything.

    I tried almost everything: remove the hard drive, screen, wireless card, dvd player, change the RAM between the slots...
    It makes no difference if.

    So I think it's a problem of memory or the motherboard is dead, what do you think?

    > So I think it's a problem of memory or the motherboard is dead, what do you think?
    Yes, the mentioned parts could cause this problem

    But it would be the worst case and you must contact the Toshiba ASP for more details

    Before that you would get in contact with ASP, I recommend you try this:

    -Remove the battery, disconnect the adapter.
    -Wait 30-60 minutes
    -Bring the two parties together and try to turn on the laptop

    Maybe if this work around short help

  • cannot answer phone when the screen goes black

    I have the PE. I also have the unchecked box that says to finish the call with press the button (when the screen times out). How can I answer a call once the screen has expired without pressing a button that ends the call?


  • the police or the 'stuff' on my screen go beyond passing on my other computer. How can I reduce the size of what is seen on the screen

    Basically, my screen is bigger than on my other computer.

    How the elements on the smaller screen. It's like looking through a magnifying glass.

    What are the resolutions of the screens, if they have the same then the best resolutions, that you can do, is make the sizes of icon and smaller through fonts

    Right click > properties > appearance > advanced and scroll down and make it smaller, and then click 'apply '.

    If the resolutions are different, make the resolution on the bigger screen, higher and higher until you are comfortable, or peak.

  • When I stop I get message from windows, but cannot read it leaves the screen

    When I shutdown stops, she arrives with a message from windows, but leaves the screen before you can read it

    There is a place to CANCEL but you can't do anything, so he continues to stop.

    Hello Joan.

    Have you tried the key break on your keyboard? Try and see if it helps you.

    Kind regards

    BearPup

  • LAPN300 Workgroup Bridge cannot be seen outside the local subnet

    Hi, I have a strange problem, I hope you can help with.

    I have the following in my network

    1 DSL Modem Router

    2 LAPN300 AP connected to [1] via ethernet

    3. another AP connected to [2] via the parameter Workgroup Bridge [2]

    All appear to be configured correctly, [2] shows that [3] is connected in the section of bridge of the workgroup of tha status page.

    When I connect a wireless [2] client I can ping [1] and [3] and an external address as Ecritel.net

    When I connect a customer [3] wireless I can ping [1] and [2] BUT cannot ping an external address

    All 3 cameras have manually set IP addresses x.x.x.254, x.x.x.253 and x.x.x.252

    only [1] has NAT and DHCP active.

    I already tried a different router [1] and a different access point [2] but get exactly the same result.

    Do you have an idea what I'm doing wrong or troubleshooting.

    Thank you

    LanceTyler wrote:

    Thank you chadster766

    Yes you are right. I had the network defined as

    Modem => LAPN300-online WAG120N

    I have now tested it as you suggested

    Modem => WAG120N-online LAPN300

    This has indeed fixed the problem.

    UnfortunatelyI cannot use this topology for my solution that I need the LAPN300 my AP central.

    Can you advise if there is another device that I can use instead of the WAG120N?

    If I buy another AP support WDS which will work with the LAPN300?

    Is there some other wifi feature that I should be looking, or should I just get a wifi Extender?

    I need the final configuration to be like

    Modem-ethernet online => LAPN300-wifi-AP online online? -Online wifi-online PC Client

    Thank you for your expertise.

    I would recommend either a LAPN300\600 or if your budget can support a LAPAC2600 which is newer Linksys AP.

    You can continue to use Workgroup Bridge or WDS. They both should work. I don't know which protocols are better.

  • Cannot find seen recently the images...

    I have downloaded about 10 different images for a last week ppt presentation. (I downloaded versions with the leash of sea Adobe Stock). I wanted to put together a ppt for a colleague to the company for review before you buy the images. All images have filenames as [AdobeStock_42863038_WM.jpg].

    Now, I want to buy images. I search the name of the image and Adobe Stock said that there is no file with this name.

    How to easily return to the images I want to buy?

    Please type only the number of images on the Web site:Royalty free images, pictures and graphics. Adobe Stock

    For example just type 42863038.

  • Cannot insert .aom file in the DW CC page despite trying various forum boards. Hoping that it is a problem of liaison and base folder organization. "Year" shows the page, but it cannot be seen in the browser.

    Hi people,

    I have a problem which can be laughable to some as I'm a newbie. I tried for weeks insert my edge .aom file animate CC published in my Dreamweaver CC pages with no luck so far. I hope it's just a problem of basic organization, the reissue of links/folder.

    That's what I've tried so far. I followed the standard basic instructions on various forums without success. I found that the folder structure that my Edge animate published was different from the default folder structure in a tutorial that I read. My containers are fluid but I kept getting 'the height is zero', "Width is null", until I manually inserted the dimensions in the code. Now, I get a "A" display on the page but still not animated in the browser. My homepage with its old animation intro works very well despite me trying to fix by moving files around a website that now looks like the dog's breakfast. I tried constantly to correct the links broken with mixed success. The list of broken links report shows some as 'unassigned assets' which I do not know how to fix.

    Thanks in advance for your help. I'm fast running out of Valium in order to find an answer will be a relief.

    See you soon,.

    G.

    Hi Gene, in fact anyone who can help would not need the versions "published", but just the original files / folders.

    Go to the project folder (example below) Select all, excluding the / publish the folder, then zip the selected items.

    Darrell

Maybe you are looking for

  • How can I solve "content encoding error."

    Many sites (including mozilla) without giving me the error message above - now work with other browsers and I am disappointed that, after searching the web everywhere seem to many people with the same problem but no solution.

  • User accounts - need to open a user account so that others can use my office

    I have Vista Home premium running and need to open a user account, while others can use my counter top... Will be some let me know how to do this?

  • User profile service does not not a profile

    I am the administrator on my computer at home, my wife and I have a profile but my profiledoes not load. I am not able to access the user profile Service to restart. Does anyone have an ideaHow can I restore my profile?

  • Popup remember pw

    I know that this isn't a matter of MS, but I don't know where to turn. Have of it any suggestions of where they come from? Thank you Richard

  • No laptop Asus sound and unable to watch videos on YouTube

    I have no sound on my laptop Asus (motherboard: ASUSTeK Computer Inc.. |)  | K73E processor: Intel (r) Core i3 - 2350 M CPU @ 2.30 GHz | CPU 1 | 782/100 mhz.)  I have Windows 7 64 bit.  I use Kaspersky Anti-virus 2014 and Malwarebytes Anti-Malware Ve