Visual Studio 2010 on Windows 7 64 bit does not start with error 0xc000007b Application

Similar Questions

• Windows 7 32 bit does not start after the installation of the need for assistance

  I have an iMac 21.5 inches (mid-2011) with 8 GB Ram, 2 TB SSHD, new HL-DT-ST DVD - RW GA32N and tried to install windows 7 (32 bit) on using Boot Camp Assistant.

  I already downloaded and copied software 4.0.4033.zip Boot Camp here-> https://support.apple.com/kb/DL1630?locale=en_US for my 16 GB Pen Drive MS-DOS (FAT32)

  The installation was successful, and windows 7 loads just fine 1st time, I created UserID and password, settings etc... using the apple keyboard then installed the drivers from apple on this issue of my 16 GB USB key. Seems my Magic Mouse works but my keyboard is not detected

  Then I tried to restart so the changes would come into force, and since then my Windows will not start or run Windows 7

  Now if I start my iMac hold down the Option key, I get Macintosh HDD, windows, recovery 10.11.4 and DVD. If I select Windows or Windows DVD it starts Booting then black screen followed by this Message on the screen «Press a key to boot from the CD or DVD...» »

  If I press any button it starts booting from DVD and gives me the option to install Windows and if I do not press a button some then nothing happens

  Windows does not start a BootCamp HDD and I'm left with no option but to press on the button / stop to stop iMac.

  Fortunately my El Capitan works well, but my Windows will not start. I tried 2 times install windows 7 32 Bit on my BootCamp HDD.

  So any help, I do not understand what am I'm doing wrong, I would be really grateful if someone who knew bootcamp can guide me so that I can run Windows OSX on my iMac.

  Thanks in advance.

  Remove the DVD, boot in OSX and after the release of the following Terminal commands?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• Program compatibility Windows 7 64 bit does not start

  Hi my Windows 7 64 bit program compatibility does not start problem is the package id pcwdiagnostic

  path c/windows/diagnosis/system /pcw

  error code 0x80070426

  source engine

  context limited

  [Original title: malankane]

  Hello

  Thanks for posting your query in Microsoft Community.

  • You try to install a program in compatibility mode in Windows 7 64 bit?

  I suggest you refer to the article below:

  Help with Windows 7 compatibility issues

  Understanding hardware and software for 64-bit Windows

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Windows Vista (64-bit) does not start.

  Last night, I installed the new McAfee antivirus due to having a virus that prevented the windows firewall to allow me to surf the net via my router (usually would work when directly connected to the modem). The antivirus has worked very well and I was able to access the internet very well. The rest of the evening consisted of me Star Trek Online patch and play a little of it and there was still no problem. This morning I woke up to find my computer screen in the the Startup Repair stating that it could not load Windows Vista.

  Here are the details given after that Startup Repair ends:

  Problem event name - StartupRepairV2
  Prob GIS 01 - AutoFailover
  Prob GIS 02 - 6.0.6001.18000.6.0.6001.18000
  Prob GIS 03-6
  GIS 04 196611 prob
  Prob GIS 05 - BadPatch
  Prob GIS 06 - BadPatch
  Prob GIS 07-0
  Prob GIS 08-3
  Prob GIS 09 - WrpRepair
  Prob Sig 10-10
  Version of the OS - 6.0.6001.2.1.0.256.1
  -ID of locale 1033

  I tried to go in Mode safe mode (F8) and it still won't start. The Startup Repair cannot repair. Any suggestions?

  Hello

  You can perform a recovery of windows system restore and check.
  Follow the step from the link provided.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  We need the DVD of windows to solve the problem. I suggest you to contact the manufacturer of the computer and get windows vista DVD. If you are able to get the Windows DVD and then, I suggest you to follow the steps in the supplied knowledge base articles and check.

  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem
  http://support.Microsoft.com/kb/934540

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows
  http://support.Microsoft.com/kb/927392

  If you are not able to get the Windows Vista DVD, I suggest you contact dell and request a recovery DVD

  Contact us
  http://support.Dell.com/support/topics/global.aspx/support/DellCare/contact_us?c=us&l=en&s=Gen&redirect=1

• Rollercoaster Tycoon 3 / Windows 8 / 64-Bit (does not start)

  Hello

  Just bought the RCT 3 and installed. Everything worked fine until I tried to start the game.

  Bought and downloaded (Deluxe Edition).

  When I run the game (as Admin) a pop up window that says first time u start the game, you must install drivers (you need administrator rights)
  After clicking Yes, a new window appears instantly with error 1275 and after klick on OK a new Popup with the opinion that I don't have Adminrights to cela-_-

  Tried all modes of compatibility and running it as an administrator!

  Here are a few screenshots that is packed with Winrar (German)

  http://www.file-upload.NET/Download-7423917/RCT3-WIN8-error.rar.html

  Sorry for my bad English!

  Hello

  It looks like Rollercoaster Tycoon: Deluxe edition is not compatible with Windows 8.

  http://www.microsoft.com/en-us/windows/compatibility/win8/CompatCenter/ProductDetailsViewer?Name=RollerCoaster%20Tycoon%3A%20Deluxe&vendor=Atari&Locale=1033&BreadCrumbPath=RollerCoaster%20Tycoon%3A%20Deluxe%203&Type=Software&tempOsid=win8

  Please contact a game administrator to find out if there are patches to work with Windows 8.

  http://www.Atari.com/support/Atari

  http://www.Atari.com/corporate/contact

  Please contact us if you have questions about Windows operating systems

• Windows 7 print spooler does not start: System error 1068 occurred. The dependency service or group could not start

  Hello

  I still have the "system error 1068. The dependency service or group was able to start.

  "I use Windows 7 Home premium 64-bit and my printer is HP PSC 1310 series.

  I downloaded the latest driver in the HP website, but it will not continue installation that the print spooler is not started.

  I tried "restart the spooler to print the title of the services, it does not, with the error message above.

  I have check the dependencies and it say HTTP and RPC

  I check on RPC and DCOM Server process Launcher two dependencies and the RPC end point Mapper is started

  I went to regedit and found the keys as follows I don't know if its correct:

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Spooler]

  'DisplayName"="@%systemroot%\\system32\\spoolsv.exe,-1 '.

  "Group"="SpoolerGroup."

  "ImagePath" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00,------.

  74,00,25,00, 5 C, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73,------.

  00,70,00, 6f 00 6f, 6 c, 73, 00, 00, 00, 76, 00, 2nd, 00, 65, 00, 78, 00, 65, 00, 00, 00

  'Description"="@%systemroot%\\system32\\spoolsv.exe,-2 '.

  "LocalSystem ObjectName"=""

  "ErrorControl" = DWORD: 00000001

  "Start" =: 00000002

  'Type' = dword:00000110

  "DependOnService" is hex (7): 52, 00, 50, 00, 43, 00, 53, 00, 53, 00, 00, 00, 68, 00, 74, 00, 74, 00,------.

  70,00,00,00,00,00

  "ServiceSidType" = DWORD: 00000001

  "RequiredPrivileges" is hex (7): 53, 00, 65, 00, 54, 00, 63, 00 62 00, 50, 00, 72, 00, 69, 00, 76,------.

  00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 49, 00, 6 D, 00, 00, 65, 70, 00,------.

  72,00,73,00, 6f, 00, 6F, 00, 61, 00, 74, 00, 65, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c,

  00,65,00,67,00,65,00,00,00,53,00,65,00,41,00,75,00,64,00,69,00,74,00,50,00,------.

  72,00,69,00,76,00,69,00, 6 C, 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 43, 00, 68,.

  00,61,00, 6F, 00, 00, 65, 67, 00, 4F, 00, 6f, 00, 74, 00, 69, 00, 66, 00, 79, 00, 50, 00, 72, 00,------.

  69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 41, 00, 73, 00, 73,------.

  00,69,00,67,00, 6F, 00, 50, 00, 72, 00, 69, 00, 6 d, 00, 61, 00, 72, 00, 79, 00, 54, 00, 6f, 00,------.

  6 b, 65, 00, 00, 6F, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00, 65, 00, 67, 00, 65, 00, 00,------.

  00,53,00,65,00, 4 c, 00, 6f, 00, 61, 00, 64, 00, 44, 00, 72, 00, 69, 00, 76, 00, 65, 00, 72, 00,------.

  50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 00, 00

  "FailureActions" = hex: 80, 51, 01, 00, 00, 00, 00, 00, 00, 00, 00, 00, 03, 00, 00, 00, 14, 00, 00,------.

  00,01,00,00,00,60, EE, 00, 00, 01, 00, 00, 00, 60, ea, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00

  
  

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Spooler\Performance]

  "Close" ="PerfClose."

  "Collect"="PerfCollect."

  "Collect Timeout" = dword:000007 d 0

  "Library"="winspool.drv".

  "Object list"="1450".

  "Open" = "PerfOpen."

  "Open Timeout" = dword:00000fa0

  
  

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\Spooler\Security]

  "Security" = hex: 01, 00, 14, 80, 78, 00, 00, 00, 84, 00, 00, 00, 14, 00, 00, 00, 30, 00, 00, 00, 02,------.

  00, 1 c, 00, 01, 00, 00, 00, 02, 80, 14, 00, ff, 01, 0f, 00, 01, 01, 00, 00, 00, 00, 00, 01, 00, 00,------.

  00,00,02,00,48,00,03,00,00,00,00,00,14,00, 8 d, 01, 02, 00, 01, 01, 00, 00, 00, 00, 00,------.

  05, 0, 00, 00, 00, 00, 00, 18, 00, ff, 01, 0f, 00, 01, 02, 00, 00, 00, 00, 00, 05, 20, 00, 00, 00,------.

  20,02,00,00,00,00,14,00, fd, 01, 02, 00, 01, 01, 00, 00, 00, 00, 00, 05, 12, 00, 00, 00, 01,

  01,00,00,00,00,00,05,12,00,00,00,01,01,00,00,00,00,00,05,12,00,00,00

  I go to C:\Windows\System32\spool\PRINTERS, there is nothing for me to remove it.

  Any other advice would be greatly appreciated...

  Hello yan_dao69,

  I suggest that you try the methods below to solve the problem.

  Method 1:

  I suggest that you run the printer troubleshooter. This will automatically diagnose and fix printing problems:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Ideally, this would set the print spooler service issues.

  Method 2:

  I suggest that you disable the Antivirus software temporarily and verify if you are able to start the print spooler service. You can check the link that will give you information disable antivirus below:

  http://Windows.Microsoft.com/en-in/Windows7/disable-antivirus-software

  Note: Please make sure that you enable the antivirus software after the test to keep your computer protected.

  Method 3:

  Check the dependency of the spooler services in the registry.

  a. Click Start, type regedit in the search box and press ENTER.

  b. look for, and then click the following registry key:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Spooler

  c. right-click on spooler, click Export, save a backup file on your desktop.

  NOTE: If an unforeseen problem be encountered after changing the registry, please double-click on the file to restore the backup.

  d. in the details pane, if the DependOnService value shows values of RPCSS and other key, right-click DependOnService and then click on edit.

  e. in the value data box, delete the other keys and then click OK.

  f. exit the registry editor.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756 ) how to back up and restore the registry in Windows.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows does not start with error - PXE - E53: no boot file name given

  I have a PC HP P6010in at home, but for 3 days while turning on the PC, I get the error PXE - E53: no boot not received and after that the wndows file name 7 I installed does not turn. Even the advanced startup options do not come.

  Please help solve the problem.

  Thanks in advance

  Hello

  This error comes if the operating system or any boot device is not at the start of the network, where the system tries to boot from the network or Boot Rom. seems the BIOS setting is lost. To solve the problem. Enter the BIOS by pressing F10 or F1 and reach the start (on the top with the right arrow key) tab. In the Startup tab, there should be an option related to the priority of the device, select first boot as drive boot HARD settigs, and then save by pressing F10, select Yes for confirmation.

  Now a PC will reboot and hope that the windows starts.

  Good luck

• Windows 7 search service does not start. Error references 2147218061. How can I get this service began so my OneNote notebooks are available?

  I am unable to get windows search to start from the Administration Panel.  The error box refers to error code 2147218061.  I want to get this started so I can take advantage of OneNote search functions.

  Troubleshooting Windows 7 & Vista search & indexing errors
  http://www.WinVistaClub.com/T24.html

  You could look at reset or rebuild the search Index.

  How to use Indexing Options in Vista (and probably Win 7)
  http://www.Vistax64.com/tutorials/69581-indexing-options.html

  Try the system restore and the System File Checker.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (or 7)
  http://support.Microsoft.com/kb/936212/#appliesTo

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
  http://support.Microsoft.com/kb/928228#appliesTo

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/default.aspx/KB/929135

  Try running ChkDsk to check your drive for errors. Right click on your drive icon / properties / tools / error checking.  Try first by checking do not each box (that it will run in read-only mode) to see if it reports any problems file or hard drive.  If so, restart it by checking both boxes and restart to allow him to attempt to fix any problems found.

  Are there problems with other Services that may be running or from?

• Computer Dell laptop does not start with error: 0xc000021a in windows 8 pro with media center...

  I have dell laptop computer (windows 8 pro with little Media Center x 64) ##genune, not cracked or pirated... #.

  It worked fine until the evening yesteday and I was playing Holy 4th place after closing, I noticed that the battery is about to happen at 10% so I did it just to sleep for awhile cauz I haven't had none running around the House... shortly after came current I just picked up my cell phone, but suddenly I saw an error message indicating that "your laptop computer encountered a problem and needs to restart. We are only collecting the error information, and then we'll restart for you. (100 % Complete) If you want to know more, you can search online for this error: 0xc000021a "and there is no changing the screen as I waited for 3 hours now... I never had an error like this... pls hlp me...

  Hello

  Are which country you located?

  Dell has wide global support. I suggest you to select the country where you are and check if you can get the recovery DVDs.
  http://www.Dell.com/support/contents/us/en/19/category/contact-information

• How can I install visual studio 2010 for window XP

  Visual studio 2012 put window 7

  Hello

  The description of the problem seems a little unclear and I wish I had a better understanding before you start working on it. I would really appreciate if you could answer the following questions:

  1. what operating system is installed on your computer?

  Operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  2. are you talking about Visual studio 2010 from Windows Update?

  Please provide us with more information on the specific question to help you to fix as soon as possible.

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Connection not lost of Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller no windows 7 64 bit does not fixed the driver version v2.4.7.29_WHQL

  Connection not lost of Atheros L1 Gigabit Ethernet 10/100/1000Base-T Controller no windows 7 64 bit does not fixed the driver version v2.4.7.29_WHQL.

  It's sad to see how Samhrutha answer to the question in this way.

  The driver does simply not good.
  The only option to address this situation in the meantime a driver that works, disable features in ' Configure, Advanced tab "on the actual card.
  Different properties exist here. Try to enable / disable some of them. It helped for me on Win7 x 64 ASUS MB.
  Kind regards
  fundutzi

• Windows 7 64 bit does not recognize the external hard drive.

  Windows 7 64 bit does not recognize the external hard drive.  I have an old 250 GB Western Digital external hard drive.  Neither of my windows 7 machines recognize it.  It does not show in the device, Manager of the computer Manager or Explorer.  Any help would be appreciated.  THX Mike

  Hello

  Initially, check if the hard drive is compatible with Windows 7.
  Check out the link - http://www.microsoft.com/windows/compatibility/windows-7/en-us/default.aspx
  See the help article and check if it helps.
  
  My drive does not appear in Windows Explorer
  http://support.Microsoft.com/kb/330140
   
  Tips for solving problems with USB devices (this also applies to windows 7)
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices
   
  It will be useful.

• Windows does not update with error code 8024402C

  Windows does not update with error code 8024402C

  Quote your full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP1; Vista 64 - bit SP2; Win7; Win7 64 bit) when you post in a forum or a newsgroup. Please do it in your next reply.

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  0x8024402C error code when you try to install updates on Web Windows Update or Microsoft Update sites:
  http://support.Microsoft.com/kb/900936

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Win2k3 comments of 64-bit does not start on 64-bit Vista, processor E6700 with VT active host

  I have a guest for Windows Server 2003 64-bit running on a 64-bit Vista with VMware Server 2.01 host.  The host system has a CPU of Core2Duo Intel E6700 and VT is enabled in the BIOS.  The guest has worked fine until this morning.  Windows updates hit the host the next day and installed Microsoft lastest set of security patches and rebooted the host.  Because then the host 64-bit does not start - I can get the BIOS on reviews, but Windows itself indicates that he doesn't see a 32-bit CPU and cannot load 64-bit operating system.

  64-bit VMware compatibility checker, said that the host is 64-bit ready comments.  I don't know if something is messed up in the comments or on the host?  It's the only host 64-bit on the system, all the other guests are 32-bit and load very well.

  See troubleshooting problems of Intel VT - x.

• HP 250 g3: hp 250 g3 does not start with windows 8 ir says the GPT partition style

  HP 250 g3 does not start with windows 8, it is said GPT partition style and custom boot that I have fomarted the hard drive... Please help

  Thnx man always the same thing, but I deleted all partitions and then I was able to start...