VLM can disconnect a user-based license?

Similar Questions

• Unable to disconnect the user admin, user has the application running

  Hello
  
  Is there anyway that I can disconnect this user admin, because I know that there is demand running, I'm trying to Log using the regional service, but it keeps giving me the user a reuqest running.
  
  What should I do about this?
  
  Thank you

  Celine wrote:
  Robb,

  Thanks for the reply. The problem is that I can't find the application. then I tell myself that what essbase studio performs the import.

  Thanks again.

  Don

  Stop the services...
  N

  Kill Esssvr.exe process of essbase server.

  Kind regards
  Katia

  Published by: P on April 7, 2011 15:11

• Windows 7 can not disconnect the user

  Hello!

  I thought that Windows 7 is the multi-user operating system, but it looks like I was mistaken. Sometimes, you may not disconnect to connect to another user. This happened to me today again. And it wasn't the first time. Then I wait in my exercise of laptop and notebook battery went to hibernation. I plugged in and turn on again and you can not belive - it pick up Windows and continue to end the session. Apparently there is no option to turn it off with the power button / stop. What to do or use an account that one user, of course, Windows 7 isn't able to use more than one user account?
  What a beautiful end of week for users of Microsoft products. Yesterday my desktop with Windows 7 PC crashed (BSOD), today in the morning my Windows Phone 7 reboot randomly (it's not resolved and answered: http://goo.gl/xF9fx) and now laptop with Windows 7 doesn't know how to disconnect the user. I can't imagine what would happen if I had an Xbox. I am so happy. :-)
  
  
  Kind regards
  Matej

  Hello SLOMatej,

  You can see this FAQ on the failover of the user.
  This may not affect you, but it would be interesting to watch.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/i-cant-switch-users-in-Windows-7/b1d6edca-dcf8-4b54-960d-1a2a04fb4f4e

  Let us know if it helps.

  Marilyn

• I downloaded Acrobat in August and I would like to use it on my laptop my secondary device. I understand that a user can use 2 devices 1 licensed, as long not to execute simultaneously. How the second download is complete?  (Dummy instructions plaids

  It's the only information I found on the use of a second device from Adobe:

  Can I use my software on two computers?

  If you have, or the main user, a single-user license or volume Adobe product that is installed on a computer at work, you can also install and use the software on a secondary the same platform, home computer or a laptop. However, you cannot run the software simultaneously on both primary and secondary computers.  Not more than one user can use a product from Adobe single-user license.  Note: The AVL customers must purchase two different licenses to use both operating systems, even if they have two different computers. They can only use the same license on another computer (not simultaneously) with the same platform at home.

  It is actually for my boss for all help timely is appreciated!

  Hi Rebecca,.

  According to the end-user license agreement listed above at all moment that you can use your license purchased on upto 2 computers.

  Kind regards

  Rave

• I can, t our user access in Control Panel; is a message "wrong number of arguments or invalid property assignment.

  I can, t our user access in Control Panel; is a message "wrong number of arguments or invalid property assignment.

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  Cannot open the item user accounts in Control Panel on a Windows XP-based computer

  http://support.Microsoft.com/kb/919292

  Hope this helps

• I want to install the version of the windows license, so can I have a windows license, I have install windows 7 with this key?

  I have the windows product key 7 with my computer dell laptop. in recent years my brother using the pirated version. now, I want to install the version of the windows license, so can I have a windows license, I have install windows 7 with this key?

  Original title: windows 7

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?

• ASA VPN - allow user based on LDAP Group

  Hello friends

  I have create a configuration to allow connection based on LDAP Group.

  I m not specialize in the firewall and I tried to follow the links above, but both seem old, commanded several is not available.

  http://www.tunnelsup.com/Cisco-ASA-VPN-authorize-user-based-on-LDAP-group

  http://www.Cisco.com/c/en/us/support/docs/security/ASA-5500-x-series-NEX...

  Anyone know how I can do?

  Thank you

  Marcio

  I like to use the Protocol DAP (dynamic access policies) to control this.  Follow this guide:

  https://supportforums.Cisco.com/document/7691/ASA-8X-dynamic-access-policies-DAP-deployment-guide

• Windows Task Manager cannot disconnect a user

  I have windows 7 Home premium with three accounts on this subject. Often, someone else a of both uses the standard account on it and it locks, I come and connect with my directors and log and try to kill their session. When I run the Task Manager, select the standard account and then click on logout I get an error message Amy (sessionID = 1) user cannot be disconnected. Access is denied.

  I tried to run taskmanager in the folder system32 as an administrator (even if my account is administrator), but I still get the same message.

  Amy (the standard user account) at this point is disconnected as Task Manager. How can I connect two other users without having to re - start please?

  Hi john120165,

  Welcome to the Microsoft Answers community.

  Try these steps and see if it helps:

  1. click on Start, click on All the Programs, click Accessories, right-click Guest, and then click on run as administrator.
  2. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
  3. at the command prompt, type taskmgr.exeand then press ENTER.
  4. switch to the tab users and Disconnect a user account and check

  If the steps above did not then resolve your problem, try the steps below.

  Enable the built-in Administrator account and check if the problem persists.

  I suggest that you allow the default Administrator and check if it works.

  1. open an elevated command prompt.

  a. click Start.
  b. click on all programs.
  c. click on Accessories.
  d. right-click on command prompt.
  e. click on run as administrator.
   
  2. to activate the hidden - built-in Administrator account

  In the elevated command prompt, type
  net user administrator / Active: Yes , then press enter

  3. close the elevated command prompt.
  4. close the session, and you will now see the built-in Administrator account log additional icon (active) or deleted (disabled) to the log on screen.
   
  Hope this information is useful.
  Let me know if it worked.
   
  Thank you, and in what concerns:
  Umesh P - Microsoft Support

• AnyConnect: User based authentication certificate filtering Configuration

  Hello colleagues in the network.

  recently I needed to configure AnyConnect SSL VPN with certificate authentication to meet the needs of connection at the request of the features of Cisco Jabber.

  Everything is ok, but I need to filter users based on their personal certificate information. For example - all those who have a personal certificate from our CA can now access this VPN. I want to set the users by e-mail of the certificate and only these users are granted access.

  I used this command:

  WebVPN

  allow outside

  AnyConnect image disk0:/anyconnect-win-3.1.04072-k9.pkg 1

  AnyConnect enable

  tunnel-group-list activate

  Certificate-Group-map Cert - filter 10 company-Jabber

  map of encryption ca Cert certificate - filter 10

  name of the object attr eq ea [email protected] / * /

  The problem is that I have to go can visit his profile - if I change [email protected] / * / to

  On the AnyConnect client - I connect to the GroupURL of the connection profile Company-Jabber

  Hi Alexandre

  There are several ways to approach this and this depends somewhat on the rest of the config, for example if you have other groups of tunnel etc..

  I guess the easiest way (if it does not interfere with the rest of your configuration) is to add something like this:

  crypto ca certificate map Cert-Filter 65535 subject-name ne ""

  This would attract all users/certificates does not not from your previous rules.

  Under webvpn you map these users to another tunnel-group (connection profile):

  certificate-group-map Cert-Filter 65535 NoAccess

  And configure the NoAccess group so that access is denied (for example, by setting simultaneous connections to 0 in the corresponding Group Policy).

  Other means would be to use DAP (dynamic access policies) to pretty much the same as the certmap, or permission to LDAP (for example retrieves the user name for the certificate, then perform an LDAP search to see if the user is allowed to use the VPN - in this scenario, there is no need to list all the users on the ASA but for example you need to create a new group on your LDAP server that contains all VPN users).

  Let me know if you want to go further in the foregoing

  see you soon

  Herbert

• I have a free account I need to cancel so that my company administrator can provide me with a license for the full version - full version of the trial would be linked to my email address.  How can I get this done?

  I have a free account I need to cancel so that my company administrator can provide me with a license for the full version - full version of the trial would be linked to my email address.  How can I get this done?

  Hello Andrew,.

  Even if we cancel your free account, your company admin account will still not be able to add you as a user. We can go directly to your free account of the company's main account and for that, can you inbox me email address registered to your and your admin? Please don't share it on the public forum.

  Kind regards

  -Usman

• IOM - e-mail notification to a specific user, based on a dynamic State

  Hello, after creating the account in a particular target resource I need to send an email to a specific user based on the location of the user (for example area admin).
  
  In the notification of tasks tab, I see only "assignee", "Applicant", "User", "User Manager"? How can I reach the requirement specified above?
  
  Before asking this question, I tried to search the Forum of all previous posts related to it. But I could not find. Maybe I wasn't with the right keywords.
  
  Any help is appreciated. Thanks in advance.

  You will need an adapter to send the email, then you can send to any user, you want a custom code. Create a new task and it trigger the response of completion code. You can use the following APIs:

  sendMail tcEmailNotificationUtil = new tcEmailNotificationUtil (ioDatabase);
  sendMail.setBody ("your body here Type or use a string variable");
  sendMail.setSubject ("Type your topic here or use a string variable");
  sendMail.setFromAddress ("[email protected]");
  sendMail.sendEmail ("[email protected]");

  Just fill the rooms above with the necessary information.

  -Kevin

• Can I use the Vista license that I have just upgraded to windows 7 Upgrade a computer is currently using XP?

  Can I use the Vista license that I have just upgraded to windows 7 Upgrade a computer is currently using XP?

  Can I use the Vista license that I have just upgraded to windows 7 Upgrade a computer is currently using XP?

  Lol when you upgrade you send upwards with a license, not two. The license of Vista is subsumed in Windows 7 one and can no longer be used. This is the reason for which an upgrade is cheaper than licensed full.

• I noticed from lately, when I change my settings on the 2 online games, I play, I can disconnect turn it back on and notice the changes eventually reversed to where it was before.

  original title: Vista settings will not save. Why?

  I have a problem. When you use this computer (and this computer has Windows Vista), I noticed from lately, when I change my settings on the 2 online games, I play, I can disconnect turn it back on and notice the changes eventually reversed to where it was before.

  It's getting boring because it is not happened in the past and when I noticed it happened for the 2nd game after seeing this constantly on my 1st game, it came to me that it is not the games that does this: it is the computer itself.

  What should I do so that the computer can actually record setting changes I made?

  Hey, Andrew,.

  Most likely a configuration of settings on your computer file is damaged. You can take a look at this article that Blizzard has published:

  http://us.battle.NET/support/en/article/fixing-corruption-and-damage-in-your-game-files

  You can also ask your question on the forums of World of Warcraft:

  http://us.battle.NET/wow/en/Forum/1011701/

• How can I remove USER ACTIVE when I go into my PC, please? __

  How can I remove USER ACTIVE on the screen when I'm on

  computer, please?

  sikki14

  Sounds like you might want to take a look at: How to disable the functionality of quick-change to user in Windows Vista

• When we sell our software we want to remove our volume licensing, the buyer can apply to their own license. This procedure is possible?

  * Original title: Volume License

  The company that I work uses several virtual machines of windows volume licenses.  When we sell our software we want to remove our volume licensing, the buyer can apply to their own license.  This procedure is possible?

  Yes, just remove the virtual machines.

  You can even uninstall the product key.

  Click Start, type: CMD
  Right-click on CMD
  Click on run as administrator
  At the command prompt, type: slmgr.vbs - upk

  Press enter, this will uninstall the product key of the computer and to the evaluation mode, you are now free to use it on another computer.