VLOOKUP invalid reference

Similar Questions

• Cannot use the references in Subvi cluster (error 1055, invalid references)

  Hello

  I'm going through a lot of that through a cluster to a Subvi.

  The idea here is to manipulate objects in the MainVI in the nodes property thorugh Subvi, which gains the reference number of the cluster.

  In the Subvi, I use unbunling by name to access the references I need. However, I get an error 1055 (invalid references) every time I try to access the object by using the node property.

  What I am doing wrong?

  Attached you will find three files:

  The mainVI: Main.vi

  The Subvi: Single_Cam_RefBased.vi

  The def of the type for the cluster: RefClusterTypeDefinition.ctl

  Thanks in advance,

  Marcel

  SteveChandler wrote:

  The constant you have wired to the bundle is not the same as the cluster of type defined wired to your Subvi.

  I was going to say the same thing. This should be the first thing to try. (I haven't studied the Subvi, but it seems buggy too...)

  COMMENT: Again something is screwed in the current VI which makes no sense. Hovering above the terminal should tell us information about the corecion, but in this case it is said that the terminal is something like a cluster of error. This might just be a cosmetic bug...

  

• Invalid reference to the variable 'NUMBER '.

  Hi gurus

  I understand that if someone helps me, I have the following code example.

  Code example

  SET SERVEROUTPUT ON

  DECLARE

  List_of_numbers_t TYPE TABLE IS NUMBER;

  l_numbers list_of_numbers_t: =.

  list_of_numbers_t (1,2,3);

  BEGIN

  DBMS_OUTPUT. Put_line (l_numbers (1).) (COUNT);

  END;

  Error

  Error report:

  ORA-06550: line 7, column 38:

  PLS-00487: Invalid reference to the variable 'NUMBER '.

  ORA-06550: line 7, column 3:

  PL/SQL: Statement ignored

  06550 00000 - "line %s, column % s:\n%s".

  * Cause: Usually a PL/SQL compilation error.

  * Action:

  I want to check the index 1 of my collection, but I get the above error. Can someone help me to remove this error. Thank you

  Concerning

  Matt

  
  

  Hi, Matt,

  Matt. wrote:

  Hi gurus

  I understand that if someone helps me, I have the following code example.

  Code example

  SET SERVEROUTPUT ON

  DECLARE

  List_of_numbers_t TYPE TABLE IS NUMBER;

  l_numbers list_of_numbers_t: =.

  list_of_numbers_t (1,2,3);

  BEGIN

  DBMS_OUTPUT. Put_line (l_numbers (1).) (COUNT);

  END;

  Error

  Error report:

  ORA-06550: line 7, column 38:

  PLS-00487: Invalid reference to the variable 'NUMBER '.

  ORA-06550: line 7, column 3:

  PL/SQL: Statement ignored

  06550 00000 - "line %s, column % s:\n%s".

  * Cause: Usually a PL/SQL compilation error.

  * Action:

  I want to check the index 1 of my collection, but I get the above error. Can someone help me to remove this error. Thank you

  Concerning

  Matt

  The collections have some counts; scalars don't.

  l_numbers is a collection, so you can see the number of items contained in it like this:

  DECLARE

  List_of_numbers_t TYPE TABLE IS NUMBER;

  l_numbers list_of_numbers_t: =.

  list_of_numbers_t (1,2,3);

  BEGIN

  DBMS_OUTPUT. Put_line (l_numbers. (COUNT);

  END;

  /

  l_numbers (1) , however, is just a scalar NUMBER, you can't use COUNT on it

  In other words, l_numbers (1) is the number 1, so we can not say

  DBMS_OUTPUT. Put_line (l_numbers. (COUNT);

  for exactly the same reason that you can't say

  DBMS_OUTPUT. Put_line (1. (COUNT);

• CS3: Check the document says "UIDCheckStream has detected an invalid reference."

  Hello

  I installed InDesign 5.0.3 on Windows XP.

  I opened a document, and after closing it is verfied. During the audit, the message "UIDCheckStream has detected an invalid reference. It is safe to continue. "appears.

  -Disable the verifiing? If yes how?

  -Can I fix this document? If yes how?

  Thank you

  Hans

  INX dependent scripts.

  If your plugin adds persisted data that you are now missing, you must implement the script to have the data to support the INX round trip.

  In case you don't want to open your ordinary scripting features, there are ways to limit them to INX.

  You should also review your code, the assertion means that even you are referencing an object of the UID that is already deleted.

  Dirk

• Help - error invalid reference when closing file

  The problem is that the function "Close TDMS" generates the following error message:

  -------------------------------------------

  Error-2501 occurred at close TDMS in host pc.vi

  The possible reasons: Reference to invalid TDMS files.

  ------------------------------------------

  What is so strange about it, as you can see on the screenshot, is that many other functions uses the file reference without any problem whatsoever, but when it gets to the close function, an error is generated. I probed the wire of error at each step, and there is no error that occur before the close of tdms file function.

  Just to help understand the function: a file temporary tdms is created and all data from the raw data file is stored on it. A list is generated from all the names of valid channel (channels named something other than "*" "") and then these valid channels only is read from the temporary file PDM and written in the final output file. The files are so big the read and write functions must be placed in loops so that the data is read/written a line/column at the time and the entire 90 MB file is not loaded into RAM.

  Can someone help me? I really need to understand what is happening. Code examples would be useful.

  

  Change all the tunnels that you use for the refnum in those loops to Shift Registers.

  If the loop For travels '0' time the refnum passes not valid.

  Ben

• HLOOKUP invalid reference?

  Hi people - looking for some help with HLOOKUP (or his substitute!)

  The goal here is to have the cell highlighted, left of the bottom line, give me an answer that this formula seems made to order:

  I want to compare time (6 seconds @ rank 2 in this case) than the columns of Q - X, are looking for the closest number without going over, which in this case I'd expect the formula result in '4', or overlooking line T and returning the value of the line 2/T.

  Instead, I get a 'Référence' error that tells me that nada.

  Yes, number 6 in L/2 is in the same format as data columns Q - X duration. I tried doing the math for them.

  Thank you

  

  HLOOKUP searches for the value (arg #1) in the first line of specified data (arg #2), then returns the value of the specified line (arg, n ° 3).

  However, your formula tries to get the value of the 2nd rank of a single row of data.

  http://help.Apple.com/functions/Mac/5.0/#/ffa59a0514

  You may use MATCH or SEARCH instead, in the form of something like below

  MATCH (L $ 2, Q18;) T18, 1).

  --> returns 4 as the index in Q18:T18.

  LOOKUP(L$2,Q18:T18,Q$2:T$2,1)

  --> returns 4 as corresponding value in Q2:T2 to the corresponding value in Q18:T18.

  But, it is worth noting that 'close match' does not mate with the nearest. This means,

  "If there is no exact match, select the column with the largest value of higher rank that is less than or equal to the value of the research."

  Hoping that this will be your help.

• 1074384864 error [invalid reference was passed to a NOR-XET session]

  Hi all

  I get an error when I try to convey CAN frame using the bus OR MAX monitor. I use the version of NOR-XNET 14.0.

  Full error in the attachment below.

  I check why I can't write messages on the CAN bus. I receive messages, analyze, process and draw on a device CAN radar targets. But communication has been a bottleneck.

  Any help is very appreciated.

  Kind regards

  It was strange, but I thought about it now. A few restarts did not work, but then he did.

  I translated the write function in my code as well.

• not able to open vro configuration manager if State HTTP 400 Error - Invalid reference directly to the form login page.

  

  Hello

  You are not directly correct the VRO login page login, please take new private window and open the URL. https://IP:8283 / vco-config /

• dynamically called vi, PDM invalid file reference

  Hello

  I can't explain a strange behavior, I hope someone can give me a hint.

  First of all, do not ask why I need this way to go, I would like to understand why this is happening.

  We have a FGV which has 3 actions: Init, write data and close. It works on the TDMS files. The action of the init creates a TDMS file reference that is stored in a shift register to be prepared, used by writing and finally narrow cases.

  Everything is OK, if I use this FGV simply in a main VI directly from the block diagram. So that I can init, write data and finally close the PDM file.

  However, for some reason, appeared a new requirement: to be able to 'Init' and 'Close' the TDMS file using the FGV, but within a dynamically called VI (a pop-up window that may not stop the execution of the appellant).

  So in primary VI, I call dynamically VI one another by using the asynchronous call (flag x 80, "call and forget" method), and it dynamically called VI fires the FGV TDMS.

  When I probe the reference of TDMS files, I can see that it gets its value correctly after the case 'Init' of fire. After this 'init' which happened (from Dynamics called VI), a location in the MAIN VI starts calling this FGV with enum action 'Write '. I can see via sensors, the case of writing Gets the same number of REF TDMS file which has been stored in the shift register after the case 'Init '.

  But even so, the VERY first function TDMS write throws an error msg "TDMS file invalid reference '! How is it possible, if the file reference is OK and the same as that created by the function 'File open TDMS' in case 'init '?

  Again, if I execute 'init' action also directly the main VI, not a third dynamically called VI, everything is OK, it works.

  I hope that my explanation is not too bad

  Thanks for the tips and if no idea, I'll try to recreate/replicate this behavior in a test project that is small, and I'll post it...

  The problem is that when the dynamic called vi stops all references that he open invalid.

  To see what I want to say, change the dynamics vi delay like 30 seconds before she stops, the savings loop works fine until the dynamics vi stops, then the error returns.

  Mike...

• Get the error invalid identifier in the left outer join

  I wrote a query and get the invalid identifier error during execution:
  the exact error is: ORA-00904: "D". "" ACCT_NO ": invalid identifier
  This query is not able to access the parent table alias in the subquery of the left outer join.
  
  This is the query:
  SELECT D.PROD_DESC_TX, BASE. ASSET_NUM, BASE. PROD_ID, BASE.NAME
  OF TABLE1 D
  LEFT OUTER JOIN
  (
  SELECT ASSET_NUM, PROD_ID, B.SID
  FROM TABLE2 E
  JOIN IN-HOUSE TABLE3 HAS IT E.PROD_ID = A.ROW_ID
  JOIN INTERNAL TABLE 4 C ON A.PAR_PROD_INT_ID = C.ROW_ID
  INTERNAL TABLE5 JOIN B ON C.ROW_ID = B.PAR_ROW_ID
  AND B.TYPE = 'VALUE '.
  AND B.NAME = 'VALUE '.
  WHERE E.ASSET_NUM = ((CASE WHEN LTRIM (RTRIM (D.BANK_NO)) = '021 ' THEN '021' ELSE ' 020' END) |) LTRIM (RTRIM (D.APPL_CD)). LTRIM (RTRIM (D.ACCT_NO)))
  ) BASE ON ((CASE WHEN LTRIM (RTRIM (D.BANK_NO)) = '021 ' THEN '021' ELSE ' 020' END) |) LTRIM (RTRIM (D.APPL_CD)). LTRIM (RTRIM (D.ACCT_NO))) = BASE. ASSET_NUM
  WHERE D.BANK_NO = 'VALUE '.
  AND D.APPL_CD = 'VALUE '.
  AND D.ACCT_NO = 'VALUE '.
  
  Edited by: user648525 13 Sep, 2011 01:21

  I can easily look at your request at this time (using my iPhone on a train).

  But trying out this line in the WHERE (the one with the invalid reference) clause in the main query.

  Who is... in the view of inline, use only the logic of the join (the clauses).

  Overflow the filtering logic (WHERE clause) to the main request. You may need to select some additional inline view columns to make these references work.

• Add pages with restriction

  I want to calculate and add up the hours in the weekly planning table, but only those that contain a specific word.

  1 cell (class from 10:00 - 11:15) + 2. cell (11:15-12:00 break) + 3. cell (12:00-13:00 meeting) + 4. cell (13:00-13:45 run)

  for example:

  Jeff comes only for the class and meeting. So I want to add only class & session, including 2 h 15 min.

  But Nathan only comes to break, meeting & run. 2 h 30 min. my problem, that's every day is different, so I can't select specific cells, so it can calculate only what I need. I want to select each column in a week, so the program can search for specific words and only those which adds up.

  My question is there is a way I can do this? like functions, sumif and sumifs maybe... I couldn't understand it yet. He said only: I don't understand 10:00 - 13:00... I thought that maybe I could join each cell a 'hidden' length of time calculation, I can't say the program is this term with this word and to only add those... something like that...

  Thank you in advance!

  Algernom

  Hi Algernom,

  " It just says: I don't understand 10:00 - 13:00....

  A table of Pages reads "Word from 10:00 - 13:00 ' as a text string, not as 'a pair of time, separated by a hyphen and followed by a word' and might not know what to do with this string as part of a mathematical formula

  There should not be very difficult to achieve the desired result, but the method will depend on the way in which the data is organized. Here's one possibility:

  

  Data are a calendar indicating the days and activities. The names of the people who attend are entered in the cells of the body.

  Research is a lookup table listing the activities and their departure times. As each activity starts at the time of the end of the previous activity, end time can be picked up in the cell below the start time, ad only the time of the end of the last activity should be included as a separate entrance...

  The duration of each activity is calculated in column C using this formula:

  Lookup::C2: B3−B2

  Fill to the list of the last entry line. If it is filled in the last row of the table, the formula returns an error of invalid reference.

  The result column using COUNTIF to count the number of times where a name is registered to an activity, then multiply this figure by the duration of the activity. There are four sections to this formula, one for each activity, separated by signs more. (Spaces entered after each + 'stack' sections below.) The sum of the four results is returned to the cell of hours of this line.

  Result::B2:

  = COUNTIF(Data::$2:$2,"=*"&A2&"*") × LOOKUP(Data::$A$2,Lookup::A,Lookup::C) + COUNTIF (data: $3: $3, "= *" & A2 & "*") × LOOKUP(Data::$A$2,Lookup::A,Lookup::C) + COUNTIF (data: $4: $4, "= *" & A2 & "*") × LOOKUP(Data::$A$2,Lookup::A,Lookup::C) + COUNTIF (data: $5: $5, "= *" & A2 & "*") × LOOKUP(Data::$A$2,Lookup::A) Lookup::C)

  Fill up to the last row of the result table.

  This may require revision if your table (s) is (are) prepared differently.

  Kind regards

  Barry

• Tab control + Vi script problem

  Hello

  I have a tab control in my sub vi, which in turn has a secondary (let say sp) now I have an another vi which must be loaded in the secondary of the tab. But I get an error message saying invalid reference vi in insert vi. Opening a vi reference in Panel tab gives this error.

  

  I understand where I was wrong. I close the reference Vi before even that I am trying to load it in high school.

• When digital recorders are automatically deleted?

  Hi people,

  I have a strange behavior with data value references in LV OOP:

  I would like to equip a class with a reference to data value. When the first instance of this class is created, I create a new given reference value and a semaphore and put it in the cluster of private class data.

  Like this, after I created a new agency data in both cases should be the same (i.e. the dvr the same part of the memory addresses) and to avoid problems of access to the data, the semaphore is used, to ensure that instances do not, interfere when accessing data.

  After some time access vi survey error number 1 on the semaphore and the error number 1556 on the reference. It seems that the reference and the semaphore is released.

  Ist it some garbage man, who destroyed the references automatically after the vi constructor has finished, although there are always a class that stores the reference?

  Thanks in advance

  Edit: If I read that data value references immediately after that I called the class constructor and if I put a probe on the semaphore, I get the "invalid" reference as a value, even if the address of memory has not changed. Strange!

  mthimm1 wrote:

  Ist it some garbage man, who destroyed the references automatically after the vi constructor has finished, although there are always a class that stores the reference?

  Yes there is! All refnums LabVIEW are garbage collected from the VI Tope level in the hierarchy was created the refnum goes inactive. So if you have an initialization VI which is started as highest level VI and that creates your DVR and the semaphore and initialize VI is started dynamically (whose actors are as far as I know) and then he finished his task Merry and inactivity, the refnum is destroyed and your other players no longer see an object invalid refnum.

  It is therefore important to create these refnums inside the hierarchy who will use them or you can also have a VI of high level that remains active for the duration of the executation of the entire program and to delegate the creation of these refnums than VI or some Subvi which takes place in this hierarchy.

• put an end to a queue

  I copied the code for this post: http://zone.ni.com/devzone/cda/epd/p/id/1959, however, the vi is an older version of Labview.

  Above all, 'not a queue vi', is no longer available at least in the 2009 version. So how do I end the while loop once the last item is out.

  This is the block diagram of the site OR:

  

  It's my own emulation using the 2009 version, as you can see, the while loop there is a function "not a queue vi", which I cannot find in the 2009 version.

  

  I even tried the number of items in the queue of the waiting state Get vi '= 0', then wired the output at the terminal stop, but also had a wiring error.

  Hi ade.

  You must check the cluster of error (which you should do anyway in a good program...)! (You chose one of the examples written for LV6 or even older, which should be updated by EITHER sooner or later...)

  When you release the queue, it is incorrect to the EEG of reference. The GetQueueStatus feature then gives you an error that you can analyze. Complete your error ('invalid reference') looping...

• Part of the queue

  Hi all

  I am using the queue from the Message of my project implementation.

  Inside of a structure of the event, message from the queue in the queue. The message is selected according to a ring selection menu. a variation there too, so a cluster object is used for the variant of cluster and string and given to the queue.

  When I run the vi, default menu ring, its not working properly. but when I change the menu ring I get an error message. Please see the attachment.

  Everyone please comment on this issue.

  Kind regards

  MFP.

  You get an error on the "enqueu" item 1, because you use a reference to invalid queue. This occurs because you use 'use default if unwired' on the output of the structure of the event. In one (or more) of your structures of event you do not feed a valid reference of queue in this tunnel. LabVIEW out then a default queue (NULL). Since you use a registry to shift to a next iteration, you'll use this invalid reference.

  There are two solutions:

  1. Right-click on the tunnel, then uncheck the box 'use default if unwired' and all references of the tail through the diet
  2. Do not use a shift register, I think it unlikely that you change to a different queue during the runnning this VI.

  Tone