vlt0204system jury not the safe voltage is outside the range [CF]

Similar Questions

• VLT0204 card mother PS2 PG failure of voltage is outside the range. Contact technical support

  Hi all

  I currently have two servers Dell Power Edge R720. Both servers have redundant 1100W AC power supplies. Two weeks ago, as a blackout caused a power of each server malfunctions which have been replaced under warranty of new power supplies.

  Since then taking PS2 both servers reported an error, VLT0204 motherboard PS2 PG failure of voltage is outside the range. Contact the technical support.

  In order to solve the problem, I turned off the system and disconnected the power cables and pressed the power button. Then I swapped the power supplies reconnected power cables and power on the system. I repeated this step for the second server. Now, the two systems not reported the error VLT0204.

  However, the ' card mother VLT0204 PS2 PG failure of voltage is outside the range. Contact support. "error message on the front panel again. Repeat the steps above have not solved the problem. I realized that this time the error VLT0204 became persistent.

  Just to be sure that the error is persistent, I deleted material newspapers, after which, I still see a critical error in the integrity of the server--> tensions section iDRAC.

  I used the DSET to generate the server logs report that also shows the VLT0204 error message. I can provide if necessary whole zip file.

  Should I ignore this error message, or should I send it to Dell for warranty inspection.

  Thank you very much

  Sohaib

  MSI - PK,

  If feeding #2 is deleted in all, always you get the error even when it is removed?

  Also, I'd take the server to the minimum hardware requirements, which removes all installed, but the following:

  • A power source
  • Control Panel (for the power button functionality)
  • A processor (CPU) in socket CPU1 (minimum for troubleshooting)
  • A memory Module (DIMM) installed in the stand A1
  • Mounting 2 and 3 for uniprocessor or Riser 1, 2 and 3 for two-way configuration configuration

  It lights up with this configuration, you can also share the power supply 1 with 2 to test both power supplies under this configuration and see if the error is still present. If so, then probably the motherboards voltage regulator was damaged during the blackout you indicated.

  If you clear the error, try to add the removed parts back to the server individually until the return of the error indicates which device is causing the problem.

  Let me know what you see.

• I want the cursor to be in the address bar when you create a new window; It works for new tabs and a new private window, but not in safe mode.

  I tried following the advice offered in the different threads bit I found on this but nothing works out. I want the cursor to be in the address bar when I open a new window or when firefox opens without restoring a previous session. I solved the problem for new tabs via subject: config, but it does not work for the new windows. I tried safe mode and the problem persists. In a new private window, the cursor is in the address bar.

  A new window opens the homepage (default: subject: House) and not the new tab page (default: subject: newtab).

  Some of the built-in pages set the focus to the search bar on the web page, just like the Google site only.

  You can use a bookmark in the bookmarks toolbar that opens the subject: blank page.
  If you hold down the SHIFT key when you click this bookmark, then you open a new widow with this page.
  Otherwise, you need to set the home page to about: blank or on the point: about to have easy access to all the pages.

• I can't install or uninstall anything. It telling me that my computer is in safe mode (which is not the case) or my windows installer is not installed properly.

  The Windows Installer

  I have windows xp. I can't install or uninstall anything. It telling me that my computer is in safe mode (which is not the case) or my windows installer is not installed properly. I know that my Installer is 'stopped '. I tried all the steps on the Microsoft technical support. As well as other sites in an attempt to solve this problem. I tried to subscribe, unsubscribe, launches the present, which, in respect of the CDM, run something HIKEY... all, you name it. I tried to download the latest installer, that didn't work... What the devil is left to try?

  Hello

  -What you have done to try to solve the problem?
  -Did you change on your computer due to which the question has begun?

  I recommend you follow the steps in this article and see if the problem still occurs.

  How to solve the problems when you install or uninstall programs on a Windows computer.

• The Explorer does not start, the Task Manager does not start, safe mode does not start. Wat to do?

  I have recently been diagnosed with some sort of spyware / trojan in Avira and, apparently, he had removed. Apparently NOT.

  Yesterday my laptop crashed and explorer.exe would not load at startup. The screen is all black with just the cursor. Windows Key + R is not raise Run and Alt + Ctrl + Del to appear the option lock and stop... but no task manager.

  Safe mode has the same problem. I tried the option restore also, but all the restore points has mysteriously disappeared.

  I wonder if there is no solution without a ridiculous amount of data backup and restoration of the entire system. Thanks in advance

  Hello

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel - device
  Manager - graphics card - Double click on - driver tab - click on UPDATE driver - then right click
  on devices and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  CTRL + ALT + DELETE and on the tab process EXPLORER.exe and COMPLETE the PROCESS on this subject - then
  on the Applications tab - lower right - new task - type in EXPLORER.exe. Safe mode is reached
  by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all patch is usually on a base hit or miss.
  That there is no information on a black screen as it is on a blue screen just adds to the
  Difficulty. Often using a restore point or Startup Repair will have no effect. You can try a
  Google to see the proposed repairs, whom some have worked however these cover a wide
  field efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a Vista disk? You can try restoring the system to it. If you do not have your system disks
  manufacturer will sell them at low prices. Or try in safe mode if you can get there.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can create a recovery disc or use someone even version (to do the system restore there only to)
  being bootable).

  How to create a Vista recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation (if all goes well
  saves the data, and you need to reinstall the programs). Be sure to do a good backup or three.

  You can use another DVD that are not protected but you will need to copy you have the product key.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  If nothing works, you can make a repair facility that must save the data but you will need to
  Reinstall the programs. This also requires correct Vista disks especially for OEM versions. You will be
  need to know your product Code.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - type no parenthesis)
  or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Map system PS1 PG failure of voltage is outside the range

  System model PowerEdge R720

  Revision of the system I have
  BIOS version
  1.6.0
  Firmware version
  1.40.40 (build 17)
  The lifecycle controller firmware
  1.1.5.165
  Version of the Firmware IDSDM
  N/A

   

   

  JOURNAL OF THE IDRAC

  Map system PS1 PG failure of voltage is outside the range.

  The food temperature 1 is outside the range.
  Power supply 1: status = 0x200c, IOUT = 0 x 0, VOUT = 0 x 0, TEMP = 0xc0, FAN = 0 0 x, ENTRANCE = 0 x 30
  Power supply 1 is operating normally.

  Tensions

  System Board PS1 PG Fail

  power configuration ,

  No redundant Reduncancy

  primary 1st turn on hot spare

  Thus,.

  -7/24 job server, can I fix this without stopping.

  -Power to POWER block? What should be the configuration of redundancy?

  Kind regards.

  NikolaTesla,

  If the power supply is switchable redundant power supplies hot, you can remove and replace the PS1 while the server is online.

  I suggest also, as best as possible, to plan downtime, update the current server.

  I see you're a few updates on BIOS, iDrac, as well as the lifecycle controller. Now with the BIOS and iDrac being 4 updates back, I suggest clicking on 'Other Versions' on these pages and updates up to current walk.

  Let me know if it helps.

• Help!  I'm stuck.  No, not the child into the well.  I took a picture and put a second layer top with a rounded rectangle to make a frame.  My problem is that I need to find a way to hide the small box outside the box on the second layer.  Thanks to

  Help!  I'm stuck.  No, not the child into the well.  I took a picture and put a second layer top with a rounded rectangle to make a frame.  My problem is that I need to find a way to hide the small box outside the box on the second layer.  Thanks to all those who can help you.

  

  Another option is to put the Options bar of the Rectangle rounded to the path tool

  Trash bolt for the background layer, hold down the Cmd key and click on the symbol of the new layer to layer below the image to white. Then edit > fill with white.

  Return the image layer and draw the image as a path

  Click the load as a selection path in the Panel traced

  Edit > stroke and stroke with color

  Select > Inverse > delete

• Firefox 14.0.1 shows is no longer the Norton SAfe Web icon in the seacch results. The toolbar is there but NOT the icon of web security next to the URL in the search results

  After updating to Firefox 14.0.1 my results search no longer show the icon of Norton WEB security beside each result. It worked fine before the upgrade. The Norton toolbar is there, and when you click on the site that the web report secure is there but NOT the icon in the search results.

  Norton has released updates for Firefox 14 morning even as the version of Firefox 14. Norton releases usually updates, the morning even as the new versions of Firefox. Have you updated Norton through their LiveUpdate?

  • See-> https://community.norton.com/t5/Norton-Toolbar-Norton-Identity/Firefox-14-Support-for-Norton-Toolbar/m-p/760924

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• How can I disable the automatic search when text is accidentally pasted on the main window (not the address bar)?

  This happens, for example, by filling out a form on a web page. I intend to copy/paste the text in a form input box, but I accidentally stick outside of the box. This causes Firefox search spam based on my text.

  Can it be disabled?

  This is not the default behavior of Firefox as far as I KNOW.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

  • Do not click on the reset button on the start safe mode window or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can also try to rename or delete the file prefs.js and possible prefs - numbered # .js and a user.js file possible to reset all default prefs or check for associated user defined prefs on the topic: config page.

  • http://KB.mozillazine.org/Resetting_preferences
  • http://KB.mozillazine.org/Preferences_not_saved

• Some pages showing don't not the columns correctly since FF 37.0.1 update

  The problem showed up on a few pages on Lynda.com. IE 11 is not the problem.

  Here's a screenshot of a problem on Lynda.com in FF page, showing the column displays incorrectly:

  https://support.CDN.Mozilla.NET/media/uploads/images/2015-04-08-23-33-54-0d7e35.PNG

  And here is a screenshot of the same page in IE 11, is not displayed correctly:

  https://support.CDN.Mozilla.NET/media/uploads/images/2015-04-08-23-35-00-77f7ad.PNG

  Steps of troubleshooting so far:
  1 Refresh FF. No joy.
  2 disable all add-ons. No joy.
  3. run FF in safe mode. No joy.

  Nevermind, I fixed it. Changed some settings of Java, then changed their return.

• Firefox won't load is not the version of the graphic text of a website

  I see more and more pages on several site where firefox will load only the text version of the page, not the graphics. I won't be able to click a button and get a reaction. Even on support of mozilla page button to click to contains the wouldn't do anything. I had to simply press the Enter key to get it to do anything. I have reset FF default values and also load it in safe mode and the same things happening.

  the link below says "try these manual steps", but clicking on it does nothing.

  Hi soboku, ESET filtering characteristic can be adjusted to avoid problems with secure sites, either by disabling the filtering of SSL connections or by importing certificate ESET in Firefox. I don't know if you have already tried these things, but if not, you can consult the manual for your version. I looked the other day, but don't know if yours is the same: https://support.mozilla.org/questions/1006414#answer-592501

• Firefox freezes constantly after about 5 min (not in safe mode)

  Basic information: using Firefox 14, worked very well until I came back from vacation, have pulled up to my PC and updated 3 things, Adobe Flash, Windows 7 ultimate (64 bit) and AMD Catalyst control center with the new 12.8 update, then rebooted.

  Slowly try to pinpoint the cause. Flash is not installed, firefox still crashes. Tried to move the Mozilla folder on the desktop, so I could simulate a reset, firefox crashed in all cases, so I put the old folder.

  Read a few pages of troubleshooting on the firefox page and went down the list by ensuring that everything has been updated and then tried to start in safe mode. So far, no accident and we'll 15 minutes here, the best I've seen so far.

  Note: Just realized my version of Java was obsolete, uninstall older versions and installed the new version. Let's see if that helps.

  Note 2: Nope, Firefox is always crashing on a regular basis. Java was not the issue. Do not think, but was hoping...

  Try the suggestions in this response:

  • [/questions/935203 #answer - 361960]

  Alternatively, you can try to start the computer in safe mode Windows with network support (on the startup screen, press F8) as a test to see if it works.

• Laptop keyboard repair center took the picture of is not the same as the one I sent by mail in

  A little more than a week, I sent my laptop DV7 in HP for the fixed sound, apparently the sound holes had gone wrong. Nothing else was wrong with the machine.  I had worked with the technician to chat for about 45 minutes, allowing access to the computer and everything he could find it is than its neeed replacement hardware ports. Still, the machine was working beautifully except for the sound. After that I got the box, I've had packed it correctly and picked up by FedEx. After a week I get a support call telling me there is water or liquid damage not covered by the warranty, I want to pay $240 to get it fixed. I knew there were never water damage to my machine. I was talking with him and it came down to fifty percent to $117. I was not happy. But later, when I got the photos, I knew that photo of the keyboard with the tasks of water it was not mine. I called and this person has allowed me to go up the scale to climbing team. I was reminded and fees I paid with a credit card could not be charged or refunded. I was happy about it until...

  Until I got this note about repair and parts required for the repair

  FAN - HEAT SINK

  1 685445-001 MOTHERBOARD

  TOP OF 684559-001 - TOUCHPAD COVER 1

  KEYBOARD 685445-001

  All these parts were bad, I could not have continued to use my machine without any problems for 2 days, and still less to enable a tech to enter my machine with the applet, I installed to see inside and to control. Everything that was wrong with the machine, I sent was scientifically. The machine they say is fixed is not mine. And, as I said, the picture of the keyboard water tinted / control pad almost looks photoshopped. It was not the machine that I had put in the FedEx box a week before. Everyone has heard something like that?  Still, this machine had no water damage ever while I had it. What HP service set hand on, it is something like this.

  I get a machine on Tuesday. I don't even know, after all that be my machine. I know I've had several stickers on the top of the machine, so this will be a test. Of course to find the serial number may be next, not sure about this. I always let HP go in my machine when I chat online to help find all of this information. But, my Lord, the photos sent to me were horrible. As something left outside in the rain for days. This machine has been wonderful and I never would have allowed anything to what HP said had happened. I'm sure, as I said, I would not have been able to use it for several days as I waited for the box so it's like the service center said and sent photos of. I am at a loss. All this would be just a mistake? Again, I will see Tuesday, April 1 and write here what is what.

  UPDATE: although not an explanation of the mystery, HP really made up for all the worries and confusion of the mysterious water damage. I am very happy all around.

  Thank you. But my HP escalation manager did any good yesterday.

• ITunes wants to charge a songs when I have a monthly subscription of music apple - they is not the same thing?

  I was under the assumption that all the songs I've been adding to my library of music phones would appear in my iTunes on my computer account. They are not. If I find a song that I downloaded on my phone in the iTunes application and not the application of the 'music', is to show the purchase price and it took me actually to the song that I tried. I thought that my monthly focused on this topic. Thoughts/help is appreciated!

  A composition of music Apple covers music from Apple, but not those outside Apple's music; you don't need also to stay subscribed Apple music to play other songs from the iTunes Store, and they can be used in more places.

  (139636)

• When connecting on MacMini, password is auto-complete with a myriad of points and is not the right password

  When connecting on MacMini after I click on the user, the password field is auto-complete with a myriad of points and is not the right password.

  There suddenly / maybe after the most recent update 2015-008, which I installed it on 8 January 2016.

  I need to delete points, usually I can remove them by double clicking on it and pressing the delete key, but they will not simply remove by clicking in the field and using the delete key, as would be normal. Sometimes it takes a few tries to remove the points, and then I can connect.

  Does my keyboard or a virus, my usb port, the update of security or something else...?

  I use this computer without problem for a few years.

  Thank you, Kathy

  osX version 10.9.5 processor 2.3 GHz intel core 17

  First try another KB

  Next

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  Subject of memory NVRAM and PRAM

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

  Format the boot disk and then do a fresh install of Mac OS x