VM have been storage vMotioned to another data store, and now I have 3 VM with white "!" inside a red square and I want to understand the cause of this.

Similar Questions

• Storage vmotion to another data store on a different san

  Hello

  We have a 3.5 ESX cluster running 4 host ESX and Virtual Center. The licensing is ESX Server standard edition. We are migrating to ESXi 4.1 vSphere and a new SAN. One of the issues that we are going through is because we are only in standard edition, we have no storage vmotion to migrate the virtual machines of data stores in the old SAN for data warehouses in the new San. Other than purchasing the add-on storage vmotion, what other options can I. I thought to add a new ESX 3.5 server to the cluster and make storage vmotion from this server while it is running trial license. I would probably need only a few days to storage vmotion on about 45 VMs. Please let me know if one were to do this or any other alternatives available.

  Hello

  There is an unofficial plugin that does not require an authorization.

  More about http://www.virtualizationadmin.com/articles-tutorials/vmware-esx-and-vsphere-articles/vmotion-drs-high-availability/storage-vmotion-svmotion-vi-plugin.html

  plugin http://sourceforge.net/projects/vip-svmotion/

• Storage VMotion for several data stores

  I'm looking for some advice and assistance with the help of the vSphere PowerCLI to SVMotions.

  I found that I can use virtual vmname Get-machine | Move-VM - datastore (Get-Datastore datastorename) that has worked very well and I was ready to roll. However, it occurred to me that I can only refer to a data store in the cmdlet and some of our virtual machines have their drives located on different data warehouses.

  So I set up a test VM with two disks of different data warehouses and began a SVMotion. The result was that it has migrated all disks in their separate data warehouses in a single folder on the target.

  What I need to be able to do is to migrate a disk and leave the other in its original location, or migrate two disks of different locations in two different places again. As you can do if you switch the machine virtual and migrate through the graphical interface, moving storage with advanced options (and probably what you can do via the graphical interface with the virtual machine in vSphere).

  I've got ESX 3.5 Update 5 with vCenter 2.5 update 6 If no GUI in VirtualCenter and the free snap option not taken in charge is not an option.

  Is there a way to do it with the PowerCLI or am I limited to migration the data store's unique virtual machine?

  Thank you very much.

  This can be achieved using the. RelocateVM_Task() method of the VirtualMachine SDK object

  See the code below:

  $configDatastoreName = "DataStore_01"
  $HardDisk1DatastoreName = "DataStore_02"
  $HardDisk2DatastoreName = "Datastore_03"
  
  $vm = Get-VM VM001
  
  $spec = New-Object VMware.Vim.VirtualMachineRelocateSpec
  #Get MoRef for Destination datastore for Config files
  $spec.Datastore = (Get-Datastore $configDatastoreName | Get-View).MoRef
  
  #for each disk specify where the vmdk files should be placed.
  #If a vmdk should NOT be moved, enter its CURRENT datastore
  #If you forget to specify a disks location, it will be moved to the datastore
  #specified in $spec.Datastore
  
  #HardDisk 1
  $objDisk = New-Object VMware.Vim.VirtualMachineRelocateSpecDiskLocator
  $objDisk.DiskID = $vm.HardDisks[0].Id.Split('/')[1]
  $objDisk.DataStore = (Get-Datastore $HardDisk1DatastoreName | Get-View).MoRef
  $spec.Disk += $objDisk
  
  #HardDisk 2
  $objDisk = New-Object VMware.Vim.VirtualMachineRelocateSpecDiskLocator
  $objDisk.DiskID = $vm.HardDisks[1].Id.Split('/')[1]
  $objDisk.DataStore = (Get-Datastore $HardDisk2DatastoreName | Get-View).MoRef
  $spec.Disk += $objDisk
  
  #When all harddisks are specified call the RelocateVM_task()
  $vm.ExtensionData.RelocateVM_Task($spec, "defaultPriority")
  

  -

• How to change the vmdk in another data store

  for my vm four disks are there I want to increase disk capacity but there is no space on the data store

  Hello

  Solution is that you must change the drive to another data store and increase space.

  First findout in spatial data store is avaialble.

  Select the virtual machine and migration - migration datastore - Advanced - click the drive on which you want to increase space - browse - choose data store where space is available - finishing

  After migration - more space.

• Storage vMotion a VM except disk that is in another data store

  Hello

  I'm looking to convert a large number of virtual machines clones related to thick.  I decided the best way to do this is probably a simple a storage vMotion, but all the virtual machines have a secondary drive that is in another data store.  I have to make sure that disk #2 stays at its current location, while the machine virtual (Config and disk #1 files) are transferred to a new data store data store.

  I figured out how to move a virtual machine complete or a single disc but not a virtual machine under a disc.  I am able to make it through the advanced options of puissancela vSphere client so I guess it is techinically possible.

  Pointers or other ideas would be greatly appreciated.

  Kind regards

  Ty-

  You will need to use the API method, see for example Re: using several data stores, cannot migrate the vmx file in a data store

• Storage VMotion of Desktop pool (or move to another data store)

  I just wanted to check something...

  Maybe I need a pool of offices of a data store to the other. I was at SVMotion, but according to http://communities.vmware.com/message/1160464 it will not work. It looks like to make use of type svmotion, I should rebalance the pool by selecting the new data store that I want, unchecking the old data store, and then by running the rebalancing, which moves all of the old data store to the new. Is this correct? I just want to check this with someone who had it before I give it a try.

  I can confirm that if you clear your current datastore, select the new data store and re balance that the virtual machine will be moved to the new data store.   I actually did this earlier today with a pool of persistent linked clone.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• VM to the another data store

  Can someone tell me how I can move a virtual machine from a to another data store?  I get cold?  Or can it be done live?  I have esxi embedded and a san, equallogic for my configuration of vmware (with VMware infrastructure).

  SVMotion is the best way, it's a live migration.  You can do this through the RCLI or GUI.  For me, the graphical interface is better.

  Here's a good way for:

  http://www.virtualizationadmin.com/articles-tutorials/VMware-ESX-articles/VMotion-DRS-high-availability/storage-VMotion-SVMotion-VI-plugin.html

• USB HDD as a data store and storage of VMS and new virtual machines

  I have a server Esxi 4.1 with 1 TB RAID 5 storage and 3 virtual machines. The storage is full and no space for another HARD disk, so my question is: would it be possible to use a USB HDD as a data store and could be included as a storage for new virtual machines or the VM? If so, could someone let me know how to do it because I'm not able to detect the HARD disk on the host itself.

  No, it is not possible to use a USB drive as a data store.

  Linjo

• Cannot Storage Vmotion between EMC Celerra NFS and NFS VNX

  Recently we have improved our infrastructure VMware 3.5 to 5.0. Managed to migrate all virtual machines to the Esxi5.0 without any problems. More recently, we bought new storage EMC VNX 5300, set up and configured the NFS storage for the early. All the warehouses of new data related to blades and all storage pools, old and new can be found under vCenter.

  Problem we have is that we can not Storage vMotion virtual machines of the old Celerra NFS for new NFS VNX stores. It comes back with the error "cannot access file VM VNX {datastore} filename '. We got a similar message appears when you try to create a new virtual machine or import an OVF on VNX new data warehouses.

  We have the license of the company, with Dell M600 blades with EMC storage as mentioned above.

  Pointers would be appreciated

  Kem

  Thanks for your contributions, but I solved it. A bit of a 'schoolboy error', but although I had added to the VMKernel IP in the host root and read-write in the NFS export properties, I also need to add the IP address of the hosts/blades. Storage vMotion successfully in new stores VNX. THX Kem

• Migration online fo VM in another data store

  Hello, I need move a virtual machine in another data store but I need only Activ VM.

  Thank you

  After you download the sVMotion Plugin the link that I provided, follow the instructions described here, http://www.virtualizationadmin.com/articles-tutorials/vmware-esx-articles/vmotion-drs-high-availability/storage-vmotion-svmotion-vi-plugin.html

• Move virtual machines from a to another data store

  Is there a recommended (or integrated) way to move propelled out of virtual machines from a data store? Or is it a cut simple and working of dough which can be done from any client PC connected to the underlying storage providers?

  If both, store data Source and Destination are connected to the same server vCenter, do Storage vMotion. Make a right-click VM--> migrate--> change of data store and select the Destination data store.

• Move the location of the VM swap file in another data store

  Hi all

  Was in a task to move the 1000 to the file location of VM swap on another data store which is newly assigned to Exchange us to the existing store database file that will be decommissioned.

  Eager to check if anyone has made movement swap of VM location of the files to a data store to another and that all measures taken to move.

  Require some VM downtime?

  Thanks in advance a ton.

  Yes it is possible without interruption of service to virtual machines.

  1. make sure that your cluster is configured to use swap data store specified by host

  2. take a host in the cluster in maintenance mode, change the location of the VM configuration file to point to the new data store

  3. do this for all hosts in the cluster

  When you vMotion a VM from one host to another the swap file will get moved to the new data store. Later when you take guests to the maintenance and return output mode, vMotion occurs for each computer in the cluster virtual and file is moved.

• displacement of the VM in another data store

  Hello

  We organize 2 5.5 vSphere hosts (VMware vSphere Essentials 5 Licensed for 2 processors (unlimited cores per processor) physical.)

  One of our data warehouses has insufficient free space on the disk.

  I'd be happy if someone could give me a little advice what is the best way to move or copy a virtual machine in another data store.

  Already, I read after KB, but he has not understood completely.

  VMware KB: Move or copy a virtual machine in a VMware environment

  Kind regards

  Roland

  Your screenshot shows that you are on the right track.

  As soon as you have turned off the virtual computer the

  dimmed options get turned on even on the essential.

  See you soon.

• . VMDK copy in another data store

  Hi people,

  I currently have a virtual machine that is sitting in my main drive in an ESX host. My goal is to copy (and not move) this virtual machine to another data store. I heard that there is a copy command to achieve this. If someone can explain? Also can be done while VM is turned on?

  Thank you!

  KeV

  Thick-> vmkfstools-i /vmfs/volumes/source.vmdk d thick/vmfs/volumes/destination /... VMDK

  Thin-> vmkfstools-i /vmfs/volumes/source.vmdk d thin/vmfs/volumes/destination /... VMDK

  p/s: turning off the virtual computer

  http://www.no-x.org

• Move a virtual machine in another data store

  Hello

  On our ESX 4, we have created pools of resources and multiple data on SAN warehouses.

  To move that a VM resource with Betclic is very easy, but howto move a virtual machine from a to another data store?

  If I understand your question you should migrate your VM to the different data store.

  Right-click on a virtual machine, select migrate..., select Change location of data, select the desired data store, select virtual disk format (end/thick)...

  VCP4 | MCITP | Master ASE | CCNA