VM hung due to a problem with the virtual processor

Hello

Has anyone faced with the following question?

I use ESXi 5.0. I have several virtual machines run on the ESXi server. There is a virtual machine hung 2 times this month. I had to restart the vSphere Client Console.

I saw this strange event message in the event tab of ESXi host for this virtual machine:

Error stack:
Click OK to restart the virtual machine or Cancel to turn off the virtual machine.
An error has occurred causing a virtual CPU go into the stop State. If this anomaly had occurred outside of a virtual machine, it would have caused the physical machine restart. The stop State are accessible by properly configuring the virtual machine, a bug in the guest operating system or a problem in VMware ESX.

Thank you!

tkmanh wrote:

But only a VM on the ESXi host fails, the ESXi host. The link on the VMware KB States that applies to fail ESXi host.

That is why I said, «if you don't have a GROUP...» "I gave the article as a reference, because it happens to contain the corrective measures required for Intel BD132 erratum, regardless of the symptoms you are experiencing.  For a complete list of symptoms, please note the following text of the Intel erratum, rather than the text of the article:

This erratum may result in unexpected errors, an incorrigible TLB error recorded in IA32_MCi_STATUS. MCACOD (bits [0:15]) with a value of 0000_0000_0001_xxxxb (where x is 0 or 1), an accident comments or hypervisor, or other unexpected behavior of the system.

If you have a PAE enabled in this guest (or any other guest Windows XP 32 - bit on this system), this problem could potentially be the result of this erratum.  Then again, it might be something else entirely.

In any case if you are at risk of erratum Intel BD132, I suggest you to take the measures recommended in the above-mentioned article.

Tags: VMware

Similar Questions

  • How to do this: Photoviewer, Windows cannot save changes to the image due to a problem with the properties of the file!

    Hi, I'm trying to post a photo, but whenever I have try rotation to the right, it says something like: can't save changes to the image due to a problem with the properties of the file. My laptop is MS, but the photos were taken on the Iphone. How to do this?

    I don't know if the following links answer your question, but
    they may be worth a visit:

    Good luck and * proceed at your own risk *.

    FWIW... There is a very long discussion (several pages) to the
    following link:

    Cannot change the imported iPhone 4S photo
    https://discussions.Apple.com/thread/3444951?start=0&TSTART=0

    More Discussion

    iPhone 4S image properties is not compartible with Windows?
    Editing can be done on the computer due to the error
    "Windows Photo Viewer cannot save changes to this picture.
    because there is a problem with the properties of the image file".
    Any help?
    https://discussions.Apple.com/message/17291884#17291884

    More Discussion:

    We cannot turn a few photos in Windows 7 (but can turn others)
    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cant-rotate-some-photos-in-Windows-7-but-can/3a809845-9144-4BB1-9bb3-ab4f5b856524

    A simple solution is to open the photos in paint or most other
    digital image editor and modify it.

    Some people have reported success using the following free download
    to remove the metadata.

    Property restrictions stripper iphone 4S (JPEG & PNG Stripper)
    http://www.SteelBytes.com/?mid=30&cmd=download&PID=15

    Here's a way to turn...

    Easily turn locked iPhone 4 and 4 s Photos in Windows 7 with
    the rotator Lossless JPEG free
    http://www.daleisphere.com/easily-rotate-locked-iPhone-4-and-4S-photos-in-Windows-7-with-the-free-JPEG-lossless-Rotator/

    Free download JPEG Lossless rotating
    http://annystudio.com/software/jpeglosslessrotator/

  • Windows cannot print due to a problem with the installation of the current printer.

    Thread title: Epson TX235W will not print

    When I click on 'print', I get the print control. the box that tells the printer how many copies, etc.  When I toast 'print' it get a little box that says Windows cannot print due to a problem with the installation of the current printer.  Try one of the following:

    Check the printer by printing a Windows test page

    Ensure that the printer is online and on

    Reinstall the printer driver

    I did everything above and I get the same result.

    Help!

    Hello

    Did you of recent changes made to your computer that caused the problem?

    This problem is limited to a particular application?

    How is the printer connected?

    Method 1) restart the print spooler service and delete the print queue

    Start the print spooler service in the Services console

    1. Click Start and run, type services.msc, and then click OK.
    2. Right click on the print spooler service, and then click on stop.
    3. Right click on the print spooler service and then click Start.

    Start the spooler service for printing at the command prompt

    1. Click Start, run, type cmd, and then click OK.
    2. Type the following commands at the command prompt:

      net stop spooler
      net start spooler
      Output

    Note: Press ENTER after each command line.

    Cancel printing

    http://Windows.Microsoft.com/en-us/Windows-Vista/cancel-printing

    Method 2) remove and add the printer and then check.

    Add or remove a printer (Applicable for Windows 7)

    http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

    It will be useful.

  • Windows 7 cannot print - "Windows cannot print due to a problem with the installation of the current printer"

    Window 7, Lexmark 1300 series. Cannot print. When you try to print from Notepad, the error message is "the system cannot find the file specified." What impression of the word is "Windows cannot print due to a problem with the installation of the current printer" have uninstalled and reinstalled all printers in many times. Removed the Lexmark 1300 in the registry and reinstalled. No change. Ran sfc/scannnow several times. Microsoft Fixit print detected no problems. Help, please.

    Hi Baccy138,

    See the methods mentioned below and check:
    Diagnose and automatically fix the Windows USB problems
     
    Try to download and update the drivers manually from this site:
    1. click on the above link and click the menu drop down and select Windows.
    2. Select the version of operating system like Windows 7 and check the bit as a result.
    3. Download complete drivers and install it.
     
    Hope this information helps.
  • What is the problem with the virtual store for Journ.E

    What is with the virtual store?
    I have a screen wihte, I never see virtual store?
    I think the support is very very bad.

    No one becomes an answer on the question!

    I put t know why Toshiba need so much time to solve this problem.
    Unfortunately, we have to wait until it will be fixed. :(

  • Problem with the AMD processor?

    After update to Windows XP SP3, we had problems with the computer does not restart.  It was "a loop in the start-up 3 screens and would only restart in Mode without failure.  After using a great technician, the problem has been fixed.  He informed us that the problem is the AMD processor in our CV.  Because I am NOT at all computer "warned" I want to ensure that I understood the repair... There is a permanent fix?  What exactly is the problem?  It will happen again?  Thank you!

    This should work:

    http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c01457284

    If it comes to the great technician used method, you'll be fine. :-)

    If you really want to learn more, see:

    http://msinfluentials.com/blogs/Jesper/archive/2008/05/08/does-your-AMD-based-computer-boot-after-installing-XP-SP3.aspx

  • Problem with the virtual store to Windows 7 basic, home

    Hello, I have a problem with Windows 7 64-bit home basic e-store. What happened is that I have a program that I use to make small electronic circuits and it was working fine until a few days when I noticed that the design I was doing seemed to be locked - I can open it but I can't open the second tab of the main window, which I should be able to do. After much research I discovered that the problem was caused by the virtual store of Windows - system registers my designs. I need to disable this feature because it prevents me from doing my work. I tried many things including turning off virtual store in REGEDIT and it doesn't change anything. I have another computer with Windows 7 starter and I have no problem there at all. I searched the internet for ideas and found two to this site http://www.askvg.com/how-to-tweak-user-account-control-uac-options-in-windows-vista-home-basic-home-premium/

    In all no joy. Help, please. I would appreciate only the answers that have been tried and tested not something that is supposed to work.

    Thank you, Ed

    (Moved from Windows |) Windows 7 | Performance and Maintenance)

    I have a program that I use to make small electronic circuits and it was working fine until a few days ago.

    Given that things worked fine until a few days ago I would use system restore to set Windows back a week.

  • Problem with the virtual copy exports - JPEG vs DNG

    Hi all - just a quick question - I have a set of photos developed in LIghtroom that include several virtual copies of which I now want to export to in the form of final versions on my hard drive. All virtual copies are B & w versions of the masters (post-processing work also differs slightly on the top of the b & w preset).

    I need a patch of JPEG and DNG files.
    Export to JPEG files seems to work without a hitch and all the pictures come out like in Lightroom.
    Exporting DNG however come with a question - all virtual copies come out as images themselves IE. not virtual copies, but they are more b & w as they are supposed to be, but go out like color.

    Color version masters come out well. Exports of virtual copy have different look (as expected) and the file size slightly different (also planned?) suggesting this only thing missing for me is the parameter b & w.

    I have tried everything to fix this problem with no use - export the virtual copies separately etc. As already said - JPEG works, but DNG does not...

    Someone at - he experienced this and if so any suggestions on how to fix...?

    Thks a lot!

    V

    DNG files are 'RAW' files - they cannot be changed.

    You can export only B & W versions as (pixel database files) as JPG or TIFF

    You can export copies of a DNG, but they are still RAW.

    You can embed data in a DNG file (containing similar to XML with the NAVE sidecar files and raw CR2 files), but editing will be visible in software that can interpret the raw data (like Lightroom or ACR)

  • Problem with the virtual drive.

    On my g6 Pavilion, I get the full message e: HP_TOOLS road.   It is a virtual drive on my pc, how do I deploy using DISKPART to BACK?

    Thank you

    Tom

    Did you make the registry change that I sent you a private message?

    So, I agree with your statement. These are certainly back up files. The question is; What is backup files?

    Microsoft System Restore only deals with backup of critical system files and registration and records in a hidden folder that is not easily editable. In addition, you verified that this is not enabled for this player. So who is excluded.

    Another possibility is that other Windows, such as Windows Backup service, creates these files. Backup Windows treats the user's choice of the files instead of just the files of backup system.

    Try the following steps.

    1. Click Start, type "backup and restore" and press ENTER.
    2. This will bring up the Windows backup window. It seems to be set up, or it asks you to configure for the first time?
    3. If it is flagged by the look on the left side and you should see an option "disable automatic schedule;" turn this option off. The backup will be not automatically, but you can always do it manually on this screen.
    4. Delete the file Moberdan_HP from the HP_Tools partition.
    5. Improperly editing the registry if you used it.
    6. Reboot the laptop and make sure that the problem is resolved.
  • VMware Workstation with ESX3.5u4 - problems with the virtual machines within ESX3.5u4

    Hello world

    I really need a consultation on this one:

    I'm testing ESX3.5.

    As I don't want to buy any material for now I thought it would be a good idea to test ESX3.5 in my computer.

    I used this model to install ESX3.5 in my computer: http://xtravirt.com/node/100

    ESX3.5 works perfektly in workstation.

    The only problem is that if I create a computer virtual within the VM ESX3.5 works very very slow.

    I searched on the VMware Forum for this problem and found that you need Intel VT enabled to speed things up.

    But I think that my "Intel (r) Core (TM) 2 Quad CPU Q9300 @ 2.50 GHz, 2000 MHz" should have Intel VT.

    Does anyone have any ideas why my VMs on esx3.5 within the short slow workstation?

    Thank you all in advance for the help!

    Material used:

    ASUS P5B

    Intel Quad Core Q9300

    3 GB RAM

    Intel PRO/100 S-Serveradapter Ethernet

    According to your log file, the external VM using VT - x.  I'm afraid, it's as fast as your nested VMS are going to get.  While I would qualify as slow or even nested VM performance very slow, I'm not sure I'd go so far as "very very slow."  It is perhaps a matter of perception.

  • Having a problem with the virtual copy...

    .. they used to run right next to the master, but now they are just appearing in the case recently amended. Which button I push to get there, and how to return to their performance in the film strip. I thought that they were stacked, but it wasn't the case.

    Lightroom 4.1 (terrible)

    Cr2 Files EOS 1 Ds Mark III

    Mac OS X 10.6.8

    Intel Core 2 Duo

    Processor speed: 2.8 GHz

    Memory: 4 GB

    122 GB of free space

    Bravo Sir! I'm upward and running, hate photofinishing and treats like this drive me just nuts! Thanks for the reduction of the burden of Stress! :-)

    Dale

  • Why can't I save a file changed due to problems with the properties?

    Vista Home Premium 64-bit

    I sent myself a JPG file, taken by a camera in the email.

    I backed up, & then tried to turn it using Windows Photo Gallery.

    He says: 'cannot save this image due to a problem with the properties of the file.'.

    Sometimes (once, so far), it then says 'Changes to the labels, legend, side, or date taken could not be saved in this file.'.

    When I try the same thing in Windows Explorer, it says "you cannot rotate this image.  The file may be used or open in another program or file or folder can be read-onlly. ».

    Properties file shows the file read-only.

    Unchecking that and apply or OK has no effect.

    Ditto for the folder.

    But looking around, I see that (sometimes (?)) other records are also marked read-only, but are not their files.

    When I produce-> properties-> details-> ' properties delete and personal information "->" create a copy with all deleted properties ", he says: 'an error occurred when writing the property 'Altitude' in the file <....>.'.

    I can't find another way to try to remove all the ((maybe) offend them) properties.

    Hello PMH232!

    Thanks for the return of the response.  Below, I have included a few steps to try.  When you fill out these test in Windows Explorer and see if you can rotate the images.

    1. click on the start menu.
    2. click on computer.
    3. right click on the drive that gives you trouble.
    4. Select Properties.
    5. click on the Security tab.
    6. click on the Edit button where it says "to change permissions, click on change."
    7. in the "group or user names", click on the user you want to change.

    8. in the area 'Permissions for the users', click the checkbox to allow full control.
    9. click on ok.

    Please let us know status.

  • Get the message "This Mac cannot connect to iCloud due to a problem with my Id, open Preferences to solve iCloud iCloud" after entering my password which is accepted and then after a minute or two messages is.

    Get the message "This Mac cannot connect to iCloud due to a problem with my Id, open Preferences to solve iCloud iCloud" after entering my password which is accepted and then after a minute or two messages is.

    I'm your pain ptapp!

    Through my research for an answer that solves this problem, I have found that not even Apple knows how to solve this problem of password to iCloud.

    All 4 of my devices constantly ask my password because of some problems with xyz account.

    Then I enter the password only to be told that iCloud cannot check my password.

    Then after several repetitions of this I get locked and have to go to the site apple id to change my password.

    I didn't spend $6 000 on these beautiful devices so I could spend countless hours dealing with support (with no positive result) and find themselves just beyond myself in frustration. I have a Mac Pro, 2 iPads, 2 iPhones and an iPod touch. All are behaving this way, no matter what it is I'm doing at the time.

    Apple needs to fix this problem, if they have any idea how to.

  • Could not complete the command of video rendering due to a problem with Adobe Media Encoder.

    Hello, I use a macbook pro retina and before I was able to make the video without problem, and now it is popping up.  I tried to remove and reinstall photoshop, but it was not useful. I would appreciate help or advice.  Thank you!

    Here is the error message I get:

    Could not complete the command of video rendering due to a problem with Adobe Media Encoder.

    Maybe try to download from this line:

    https://creative.Adobe.com/products/Media-Encoder

    If this does not work, you might want to try reinstalling the Psalm

  • Error downloading Photoshop element 12: Arvato Berthelman - Download Manager error - unfortunately, there is a problem with the link to that file. This problem may be due to the number of users trying to download

    Error message when downloading Photoshop element 12: (I bought the license in a store)

    Berthelman arvato-

    Download Manager error-

    Unfortunately, there is a problem with the link to that file. This problem may be due the number of users trying to download the file, or the product may no longer be available. Please as minutes of a few in. If this privilege is still not available, please contact customer service at the address [email protected] or number 604-915-5200

    == > Les DEUX @ and phone number are fake!

    Hi Mireille56,

    The place where you are trying to download the software.

    [email protected] is not an email from Adobe Support.

    Please try to download Photoshop elements 12 of: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&sdid=ZPQM

    Kind regards

    Rave

    < translated="" via="" google="">

    Hi Mireille56,

    Where you are trying to download the software.

    [email protected] is not an Adobe support email.

    Please try to download Photoshop elements 12 from: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&sdid=ZPQM

    Kind regards

    Rave

Maybe you are looking for

  • Problems to install apps on my watch with the help of iPhone 5 s

    Try to install apps on my watch, but he just said "install...". » Nothing happens? watchOS2.1 and iOS 9.2.1

  • Linux and guarantee

    Hello I plan to buy a T430 and 3 years onsite NBD + protection against accidental damage. Because I'm not a big fan of Windows, I have to either a configuration dual-boot (Ubuntu + Windows) or just a single boot Ubuntu. My question is: is the install

  • memory leak Winlogon.exe and high CPU usage

    I use Windows XP SP3. I'm leaking memory in winlogon.exe (about 5 M/hour). In addition, the CPU usage spikes to 50% of all 6 seconds. The file is properly signed so probably not a virus. This problem started after the application of last weeks patche

  • PROBLEM cu Bitlocker:

    Partition (D :) este parolata cu Bitlocker if may nu pot accesa partitia decat prin panoul control!) Pana acum few days, a normal functionat, dar acum imi spune naked ca exista asociatsi trebuie its the control panoul merg program! face din nou pot i

  • How can I transfer files from XP to windows 8?

    There is a download of easy transfer from XP to Windows 7, but nothing for Windows 8