VM only and UM side by side.

Similar Questions

• HP Pro 8600 n911a Duplex printing only on one side

  Hi Im having proplem is im using the document feeder, try to use the duplex feat. and printing only on one side

  IM using paper 8 x 11, I've changed the setting for double-sided copying print settings can somone please help...

  Hello honorable31,

  Welcome to the Forums of HP Support!

  I appreciate that you try to use the double-sided copy document feeder. This model printer the N911a does not support the loading of double-sided documents. The N911g and the n supports the loading of double-sided documents.

  So that you can accomplish something similar to come, you will need to place the original on the glass, and then press copy > settings > both sides > 1 heads 2 copy. The printer is paused in the middle of the job to allow you to turn the page on the glass.

  I hope this helps.

• Refresh only the left side of the cascade point shuttle LOV

  Hello
  
  I want to fill the shuttle point dynamically using selection LOV cascading list. but when I change to another value left and right gets refreshed.
  
  but I want to refresh only the left side, right must be the same.
  
  I want to achieve something like that
  
  http://Apex.Oracle.com/pls/Apex/f?p=579:56
  
  I want to achieve this by using Refresh before and after updating dynamic action.
  Is this possible?
  
  pls help me with this. Its very urgent.

  879090 wrote:

  If you are on 4.x just used the cascade LOV Parent article (s) in the element of the shuttle

  Yes use v 4.X .and uses the parent LOV cascading item. My problem is that I want to change the elements of lov parent and cascading using different values.

  Let's say my lov elements parent has deptno 10,20,30.

  Wen I select dept 10 it should display all the emp to 10 dept. and I wil select some employees from that. then I will select dept 20 then it will show all employees of dept 20 and I will select a few PMCs from that.

  But now the prob is wen I don't change the dept No 20 of 10, the right side of the shuttle point with details emp dept 10 has disappeared. but I want that values must be ter, and should be updated by the left side.

  check out the link that I have attached in the first post. I want to achieve the same thing like that.

  Well, I looked at link above and even recreated in my demo application and added the section how it, just follow the steps

  http://Apex.Oracle.com/pls/Apex/f?p=46417:22

  Test/test connection

• Videos are curved on the left and right sides

  Hi all

  My handycam HDR-CX240E has a major prob of videos being bent or curved on the left and right sides... Sony service technicians said that the problem is not rectifiable. If the problem cannot be corrected, the camcorder is of no use to me because I need it for a large project of filming.

  Can someone help me?

  concerning

  Ashok Kumar

  
  

• Satellite L500 - 11V - Black Bars top and right side

  After searching Google for a week now, I have yet to find a satisfactory solution to this, which seems to be a common problem. I have the Satellite L500-11V, with Windows 7 installed all the latest drivers from the site Web of Toshiba and the BIOS update to 2.10. The laptop was works well, and then all of a sudden this week display seems to have evolved over the left and down. Now I have a black stripe on the top and right side of the screen!

  Also, I noticed the maximum resolution is 1280 x 800, I had put it at 1280 x 720 if I can see the taskbar at the bottom of the screen.

  Toshiba or Intel (as I have 4500 Mobile Intel Chipset) never have solved this problem...

  Would appreciate some answers to this annoying problem.

  Thank you very much

  Native resolution for this 15.6 display is 1366 x 768.
  You can choose the resolution in the display settings?

  It is not easy to understand what the problem is here, but as a first step try to reinstall the Intel display driver please.

• Storm - derived screen leaves a margin on the right and left sides of screen

  The Storm and Storm2, deriving from the screen leaves a margin on the right and left sides of the screen about 10 to 20 pixels.

  How do they get this margin?

  Thank you

  You can re - compile on JDE 4.7 - that should get rid of the compatibility mode.

  You can manually disable this in your application options.

  It can also be disabled in the JAD file. Search the forum 'compatibility mode' and you will find a lot of posts that deal with this issue.

• Resize the page only on 1 side (canvas size)

  Hello again!

  I want to resize the page only on 1 side (left or right), as an option of Photoshop-> Image-> canvas size-> choose the side you want to resize.

  Thank you in advance!

  Here is a page that is 4 x 6 inches:

  

  On the Control Panel, click the side of the reference Point (surrounded) to choose which side of the page is huge. Enter a new size. I took 4 x 7 inches:

  

• Calendar view-only and users are unable to change the time.

  We use Windows Server 2003 R2 active directory and group policy.

  Group Policy, we blocked sytem time change but after this timetable can also test block user cannt read calander also

  pls sugget me to resolve this issure

  Calendar view-only and users are unable to change the time.

  Hi sunil77,

  Your question about changes in UAC using Group Policy on Windows Server 2003, it will be better answered by the experts in the Group Policy Forum. Please repost your question to the address provided.

• Impossible to turn off read-only - and I already checked the Security tab

  Hello, I use Vista Ultimate.  I'm on my home computer and have full administrative rights.  Have a big problem trying to get the recovery off the power on a personal folder read-only.  It is NOT a folder on a network or is a system folder.  When I go in the folder and click on the Security tab, ALL users have full right to make any changes.    No error displayed whenever I then deselect read only on the general tab, click on or .  But when I re - open the folder and check the properties, read-only is still active.  It's driving me crazy.  HELP!?!?!?!

  And Yes, I tried this:

  "To view or to remove the read-only or the attributes of system files in Windows Vista

  1. Click on start, run, type cmd and press ENTER...
  2. To view the syntax for the Attrib command, Type attrib------? at the command prompt.

  To remove the read-only attribute and to set the system attribute, use the following command:

  attrib - r + s drive:------------

  For example, to remove the read-only attribute and set the attribute to system for the C:\Test folder, use the following command:

  attrib - r + s c:\test

  Be aware that some programs may not operate correctly with folders for which the read-only attribute and the system attribute are granted. Therefore, use the following command to remove these attributes:

  attrib - r s by car:------------

  For example, to remove both the read-only and the attributes to system for the C:\Test folder, use the following command:

  attrib - r-s c:\test

  If the run command is not listed in the start menu, follow these steps:

  Click Start, click principally made programs, accessories, and then click Run."
  
  
  
  
  And get an error that says: parameter Incorrect Format.

  Have you checked to see if the files in the folder are effectively read-only or if the only problem is that the file is checked in read-only?

  You may need to go higher in the chain of record because some properties are inherited (see advanced security of the folder until you come to one where the special permissions list including all permissions that are inherited for administrators or your user account). It does not stick because you don't have the permissions and/or ownership to allow you to make the change.  You must have permissions to full right for all folders (both on the main page and in the special permissions list) and you will have to take possession of the records as well.  Then change the ownership and permissions for yourself and administrators and don't forget to check the box for all files and subdirectories.  This should give you what you need to make the changes.  Here is some information that might help.

  To view your permissions, right-click on the file/folder, click Properties, and check the Security tab.  Check the permissions you have by clicking on your user name (or group of users).  Here are the types of permissions, you may have:http://windows.microsoft.com/en-US/windows-vista/What-are-permissions.  You must be an administrator or owner to change the permissions (and sometimes, being an administrator or even an owner is not sufficient - there are ways to block access (even if a smart administrator knows these ways and can move them - but usually should not because they did not have access, usually for a very good reason).)  Here's how to change the permissions of folder under Vista:http://www.online-tech-tips.com/windows-vista/set-file-folder-permissions-vista/. To add take and the issuance of right of permissions and ownership in the right click menu (which will make it faster to get once it is configured), see the following article:http://www.mydigitallife.info/2009/05/21/take-and-grant-full-control-permissions-and-ownership-in-windows-7-or-vista-right-click-menu/.

  To solve this problem with folders, folders takeownership or the reader (as an administrator) and give you all the rights.  Right-click on the folder/drive, click Properties, click the Security tab and click on advanced and then click the owner tab.  Click on edit, and then click the name of the person you want to give to the property (you may need to add if it is not there--or maybe yourself). If you want that it applies to subfolders and files in this folder/drive, then check the box to replace the owner of subcontainers and objects, and click OK.  Back and now there is a new owner for files and folders/player who can change the required permissions.  Here is more information on the ownership of a file or a folder:http://www.vistax64.com/tutorials/67717-take-ownership-file.html. To add take ownership in the menu of the right click (which will make it faster to get once it is configured), see the following article:http://www.howtogeek.com/howto/windows-vista/add-take-ownership-to-explorer-right-click-menu-in-vista/.

  I hope this helps.

  Good luck1

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Whenever I try to connect to my internet I get 'local internet only' and when I try to repair it it says that there may be a problem with your dns server.

  problem with connecting to the internet

  whenever I try to connect to my internet I get 'local internet only' and when I try to repair it it says that there may be a problem with your dns server, I looked for a solution for centuries now, and no one can seem to help me! Please someone help me?

  Hello

  First off I'm going to assume that when you say "local internet only", you really mean "local only". Also, I'll assume you are using a router for internet connection broadband. If I am wrong, then you will have to describe the answer how you try to connect to the internet more in detail.

  First of all, your router. The indicators show that there is an internet connection? Consult the manual, which probably came on a CD with the router. Internet connection led can resemble a planet with rings or a circle with a lower-case i in the middle of it, or some other symbol. It can also have a caption saying 'internet' or 'connected '. If the router is not connected while your PC will not have access to the internet.

  Click the Start button and type "cmd" then press ENTER. In the window type (mainly black) which results in ipconfig and press to enter. Transcribe the results of the command ipconfig for a response.

  Your (wired or wireless) network card is set to automatically get an ip address? Otherwise, set it to do that and also to get information from DNS server automatically...

  • Right-click on the icon network at the bottom right of your screen, and then click Network and sharing Center
  • In network and sharing Center, click on manage the network connections (on the left)
  • Right click on 'Connect to the Local network' or 'Wireless Network Connection' depending on how you connect to the router
  • Click on select Internet Protocol Version 4 (TCP/IPv4), and then click the properties button
  • If things are not set to 'automatic', please note all numbers so that you can restore the settings if necessary
  • Make sure that "Obtain an IP address automatically" and 'DNS server automatically get an address' is selected, then click OK
  • Click on close

  If you are using a wireless connection, what happens if you try to connect to your router with an Ethernet cable?

  Please post back with your comments to the above and give more details about your configuration, i.e. router brand and model (or another material of Internet), if you connect wireless or with an Ethernet cable, etc. etc.

  Tricky

• 'Local only' and 'Limited connectivity' is displayed when I try to connect with my laptop and I can't get online!

  Almost every day for the last 5 months or so, I try to get online and a "local only" or "limited connectivity" appears when trying to connect to my wireless internet.  It seems to do this whenever I try to get when another computer is also about that.  By example, if my mother found on the internet on his computer and I try to get on the internet too it does this thing 'local only' and I can't connect and it launches my mother of the internet too (she also has windows vista).  This seems to be a common problem with vista.  I don't understand all this technique _ so if you know how to fix it please don't try "computer talk" with me-keep simple or explain in detail.

  Hello
   
  Troubleshooting connection problems can be a challenge because there are so many possible causes. First of all, try the following steps:
  Step 1: Diagnose and repair the connection.
  1. open Network Diagnostics by right-clicking the network icon in the notification area, then click on diagnose and repair.
  2. check the result.
   
  Step 2: Uninstall and reinstall the wireless card driver.
  Consult the manufacturer of the wireless device or the system manufacturer's Web site to download the driver of wireless network card.
  1. click on start, type devmgmt.msc and press to enter.
  2. expand network adapters.
  3. right click the network point sup wireless driver and click on uninstall.
  4 restart the computer for changes to take effect.
  5. install the driver for the wireless card and restart the computer.
  6. check connectivity.
   
  The other possible solution for this problem is to install the latest service pack on the computer. Visit this link for more information: http://support.microsoft.com/kb/932063
   
  Try the steps and post back with the results, so that we can help you better.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Wireless network Vista says local only and a network not identified

  Original title: I'm having a problem only with my vista local wireless how to fix?

  We recently got cable internet time warner and I had trouble setting up so I spent an hour or so talking to their tech support. We got it running, but for some reason, my computer of all things can't go on the internet. It says it's connected, but I can't go on the internet. It says local only and that it was an unidentified network. I tried internet options and went on lan settings and selected automatically detect settings. And ipv4.

  Any suggestions?
  Thank you.

  Hi JosetteMaccario,

  Step 1:

  You can check the following link and try to run the network diagnostic tool and check.

  Network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Step 2:

  You can also check out the following link and try the steps.

  In the Windows wireless network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows

  Step 3:

  You can also try temporarily disabling the third-party antivirus software and firewall installed on your computer and check if the problem persists. If the problem is resolved, you will need to uninstall the software and reinstall it back or change the settings and check.

  Note: Be sure to enable the security software on the computer after checking.

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer

• Connection Internet says 'Local' only and I can't access the internet at my convenience.

  I'm not a computer genius, but I know that's not my wireless which is mess up and not allow me to access internet from my laptop.  If I try to access my home, or somewhere else that provides wireless internet, I always have trouble getting.  IF it connects, it shows 'Local' only and not allow me to access the internet.  It seems to do this when I am on the internet while someone else in my household is on it as well.  Which shouldn't be a problem at all.  I should be able to access the internet if someone else uses it or not.  Never had this problem until I got this new laptop with vista.  It lasts for almost a year now and I'm taking classes online and cannot deal with this problem any longer.  Please someone help me solve this ongoing problem that seems to be quite common!

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• Transferred file xp laptop visa vidio. Has received the record of voice only and not the vidio

  Transferred video files from xp to laptop of visa.  A received voice only and not the video file.  Now, I have that video file without sound on the xp and visa phone only plays the sound.  How can I fix it?

  Please repost your question in images and video Forum at: http://social.answers.microsoft.com/Forums/en-US/vistapictures/threads where people who specialize in graphics issues, including partial transfers (sound or video only) will be more than happy to help you with your problem.

  Good luck! Lorien - MCSA/MCSE/network + / A +.

• Files appear in 'Read only' and unable to change that.

  I have Windows 7 Ultimate. A couple of weeks, I had a big problem with some of my permissions of the user being edited (don't know how I did it but it happened) so I was unable to access programs and files, after awhile with a MS tech on cat and a system restore (failed), I just created a new user account and delete the old one.

  Everything seems to work fine now, but before I created the user account, I copied some files I had on the desktop to a flash drive and put them with my new office to the user. The property file to keep appearing as 'Read only' even after unchecking the choice and the application it is just when I close.

  This also happens when I create a new folder on the desktop, its default property is 'Read Only' - why would this be and how can I change it?

  Hi GoodfellaJC,

  Welcome to the Microsoft Answers site.

  Follow the steps mentioned below.

  Step 1:

  To view or to remove the read-only or the attributes of system files in Windows Vista or Windows 7

  1. click on Start, click run, type cmd , and press ENTER.

  2. to view the syntax for the Attrib command, type attrib /? at the command prompt.

  To remove the read-only attribute and to set the system attribute, use the following command:

  attrib - r + s drive:------------

  For example, to remove the read-only attribute and set the attribute to system for the C:\Test folder, use the following command:

  attrib - r + s c:\test

  Be aware that some programs may not operate correctly with folders for which the read-only attribute and the system attribute are granted. Therefore, use the following command to remove these attributes:

  attrib - r s by car:------------

  For example, to remove both the read-only and the attributes to system for the C:\Test folder, use the following command:

  attrib - r-s c:\test

  If the run command is not listed in the Start menu, follow these steps:

  Click Start, click principally made programs, Accessories , and then click run.

  For more information, see the article mentioned below.

  You cannot view or change the read-only or the attributes of system files in Windows Server 2003, Windows XP, Windows Vista or Windows 7

  http://support.Microsoft.com/kb/326549

  Hope this information is useful.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.