VMware Mirage, required authentication client

Hello

In the client VMware Mirage, often requires authentication. (pop-up)

I want to eliminate this authentication occurs frequently.

You have any ideas?

Tomoyuki

Dear atomic.

Are you referring to volume off customer mirage?
Please check in the console of administration for the same setting.

Tags: VMware

Similar Questions

  • Theme of WFS requires authentication, how pass/configure credentials?

    Hello

    I use the quick start kit mv11ps5_quickstart Mapviewer with last MapBuilder.

    I'm trying to set a WFS theme to an external server that requires authentication (username/password name). (here the mapviewer acts as a wfs client).

    I searched the forum and read the available documentation, but I couldn't find the way to pass these credentials in the definition of the theme.

    Is - it possible/supported anyway?
    If so, how should it be solved?

    Any help is appreciated on this.

    Thank you

    Luke

    Hi Luke,.
    It is not yet supported for the WFS and WMS themes.

    João

  • Why the tabs that require authentication moving in a new window?

    I start the value "show my windows and tabs from last time '. Many of these tabs require authentication and once the authentication to complete the tab is moved to a new window. This behavior started only recently. I saw this happen on at least two computers.

    This seems to be fixed on its own. Maybe an update fixed. To answer you question cor - el, all pages are opened by clicking the sign + to open a new tab and this by clicking on a bookmark on the bookmarks bar. As I said above I keep several tabs always open and a few require authentication. When close firefox and then running it again, after the Authentication tab moves to a new window.

    In any case thanks for the replies.

  • Popup on XMLHttpRequest for 'requires authentication' - Webworks on BB OS 5.0 +.

    Hello

    In my app Webworks for OS 5 +, I do multiple XMLHttpRequest calls to my server for you to connect, pull down, etc.  The usual.

    Occasionally and without apparent motive (and not always the first time after starting the app.) Not only the queries. ) I have will get a popup with something in the sense of 'this page requires authentication, enter the user name and password' and then request for domain, user name and password.

    However, I can just regularize and try again and it works perfectly.

    Anyone have experience with this and know what is possibly cause it or a fix?

    Or any portrait?  I'm stumped at the moment.

    This does not only happen on real devices, however.  I saw not in ripple (not provided) or the emulator.  Unfortunately, my curve doesn't seem to let me so I don't have any information other than the dialog box that opens for debugging.

    Thank you

    Rob.

    OK, it turns out it was a 401.  DOH.  And the solution for it is here: http://supportforums.blackberry.com/t5/Web-and-WebWorks-Development/Suppressing-HTTP-401-Authenticat...

  • VMware Mirage USMT

    I imported USMT 4.0 and 6.3 in VMware mirage 5.1.

    USMT will refer to Migapp.xml, Miguser.xml, and Migdoc.xml while performing the backup operation, will be these files still crushed by the policies of CVD of Mirage?

    Hello

    during a Migration with USMT Mirage will succeed user profiles etc.

    Profiles user, or at least as programs will not be crushed by Mirage if they aren't in the Baselayer / Applayer.

    But, if so then programfiles and configfiles will be overwritten. This Mirage is allowed to replace, and which do not configuret in the rule layer.

    Timo

  • VMware View 4.5 Client slow in WAN

    Hello

    We tested VMware View 4.5 Client in WAN and it seems to be slow.

    Not too big gap between RDP and PCoIP.

    How much bandwidth needed a client VMware View 4.5 normally, a normal desktop, non-multimedia user?

    Thanks Mike,.

    Here are some notes more - in addition to sizing guidelines, it may be wise to adapt some of the PCoIP session variables - see the knowledge base article http://techsupport.teradici.com/ics/support/default.asp?deptID=15164&task=knowledge&questionID=348Teradici.

    In addition, for MPLS to check if the load balancing has been configured for the link?  Per packet load balancing results in fragmented packets that should not be used with PCoIP Protocol.  If you need load balancing MPLS consider using instead the load balancing and the destination.

    If you have not already done so, do not hesitate to ask the team to Teradici - you can send an email to [email protected].

    Stu

    Teradici Systems Engineering

  • VMware vCenter Update Manager Client installation fails

    I have a system that has been upgraded to ESX 3.5 to vSphere and installed successfully the vSphere Client, can see my hosts and virtual machines without any problem.  I install the plugin VM converter, but when I try to install the plugin Update Manager it fails every time.

    I'm installing on a 64-bit Windows 7 computer (my laptop is also Win7 64 bit and it installed successfully there).  I tried to install the application and get the error message in the Windows application logs:

    Product: VMware vCenter Update Manager Client - Setup cannot continue. VMware vSphere Client is not found to be installed on this computer. VMware vCenter Update Manager Client can be installed only on machines where VMware vSphere Client is present.

    I've already entered my store of % TEMP % and tried to install just the exe file (VMware - UMClient.exe) and who is not, I copied the extracted files, including all the files .ini, .bmp, .msi and .mst to the root of my C drive and tried installing from there.  All this provided the same failure.

    During the installation, I get this message first indicating the location of my vSphere Client installation:

    When I click on the only 'real' installation option, then spend a few seconds and then I get this message:

    http://communities.vmware.com/servlet/JiveServlet/downloadImage/9022/install2.png

    Click ok and then get a message saying that the installation has failed.

    I managed to do install finally.

    The strange solution was that I had to log on as an administrator of my machine and then install the plugin.  Even if my account is an administrator account.

    Anyway, problem solved, works perfectly and am clean now.

  • Requiring authentication for SMTPS, but not for SMTP

    Hi all

    On a cluster hive, beehive.domain.com, we created 2 endpoints for each SMTP and IMAP, a safe and the other normal, like this, users can connect to two ports (25 + 465 and 143 + 993).

    Endpoint on the secure ports were created to allow direct access from the outside to redirect the only secure ports (465 (smtp) and 993 (imap) through the firewall to the cluster of the hive.) I don't massively secure and that there is an instance of hive DMZ for this effect, but that is for later.

    Question: Is is possible to require authentication to use only secure SMTP port and not the normal? The idea being, inside the LAN users port 25 to send all the emails that Beehive will relay all emails coming from domain.com, authentication is not required it would disrupt some applications that need to send email. However, we want to prevent Mr. spammer to send his stuff from external identity spoofing the this address is @domain.com

    Any suggestions? I read in another post that one idea is to create an additional for the SMTP Protocol Secure alone, VMS as it is possible to have the identification required at the level of the virtual machines. who is?



    Kind regards

    David

    Hi David,

    fix, create a new VMS recvssl endpoint:

    beectl add_configuration_object - type 'oracle.ocs.management.model.EmailService.SMTPProperties.VMSProperties '.

    CONFIG_OBJECT_ID = da9444a0-2e3e-45e7-b5f2-98945514c6de

    name the component modify_property beectl VMSName - value SmtpSslVMS da9444a0-2e3e-45e7-b5f2-98945514c6de

    append_value - name of the component _EmailService:SMTPProperties VMSPropertiesList value da9444a0-2e3e-45e7-b5f2-98945514c6de beectl

    There was a BUG in 1.4.X beekeeper. So I post you the command line procedure. After that configures "Require AUTH" for this endpoint. This you can configure beekeeper.

    See you soon,.
    Sven

  • ESXi 5.1 required authentication

    Hi all

    Strange question here to try to open a session to change the IP address of the host ESXi 5.1.

    He can be preinstalled Dell on our new server.

    I don't have connection via the DRAC deliver and launch the console without issue.

    But when I hit F2 I get an authentication window that is not happy with any user / password combo I throw at it.

    Is there some generic password used here? I tried root and vmware without result.

    Thanks in advance.

    If the password is wrong, the only option is to reinstall the ESXi. Other options:-is this a picture of DELL. -Try to connect by using the ESXi vSphere client and enter the credentials root to confirm if she works there. Otherwise, reinstall the ESXi, won't take much of your time.

  • CAN´t connect 6 s to some public wifi hotspot that requires authentication

    I can´t connect my iphone 6 in some public hotspots that require password authentication. Oddly enough, I get a page from apple.com instead of the hotspot authentication page. I do can connect my 5s company´s at the same time and same hotspot with no problems. I did the Reset Network Setttings from the 6s, but has not solved the problem.

    Try the procedure described in this article from Apple:

    If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network

  • HP Officejet Pro 8600 N911n required authentication

    I entered a business and the person who was a dependant of the printer has left.  I need to set up my email on the device so that I can scan documents to my email.

    I filled out all the information and it rpet authentication required, but it does not say how to get authentication.

    Help!

    Hello

    Thank you for using the forum.

    From your description, it seems that the it guy who has left your company has installed an administrator password.

    You will need to get this information before you can set up e-mail on the device.

    Hope that helps.

    Please click on the "Bravo Thumbs up" If this has helped you and 'Accept as solution' If this helped solved your problem.

  • Failed authentication Client OST

    I am setting up a new DR4100 and try to connect from a Win2k8 server run Backup Exec 2010 R3 SP4. All components have the latest updates of software, plugins and drivers. I managed to install the plugin OST in BE and I created a container OST on DR, but I get the error "The OST client authentication failed" when I try to add the device company in BE. I checked the password for the login account and I have the OST of ports in the firewall of windows on the server.

    What should I check next? Thank you.

    Hello, TRNC,.

    What you said in your original post is that it seems you have a problem with the backup account.  I would double check your setting and make sure it is properly configured.

    (1) make sure that the container OST has been configured on the DR4000

    (2) make sure that the backup_user account has been configured in Backup Exec

    (3) make sure that the passwords match on the DR4000 and the Backup Exec Media Server backup_user

    Please let us know if you have any other questions.

  • PIX VPN local authentication client

    Hello

    I use the client 3.x VPN to connect to the PIX 515 using IPSec. I would use local authentication for Client VPN PIX. But I can not use the command "vpngroup Group1-LOCAL authentication server. Is it possible to use authentication LOCAL client VPN on PIX.

    Thank you.

    Kind regards

    Doug

    Try "crypto map... the LOCAL client authentication" instead.

    This command specifies the method of authentication for XAUTH.

    All orders "vpngroup" specify different parameters to be pushed

    software/hardware clients IPSec via ModeCfg. For example,.

    'vpngroup LOCAL authentication vpngroup1-server' is for the individual user

    Authentication of customer Hardware 3002. And, you're right, IUA is not

    support with LOCAL :(

    Oleg Tipisov,

    REDCENTER,

    Moscow

  • Daily VMWare login required

    Hello CC - family,

    We want to use CC for teams on the VMWare Windows Machines for our concerthouse. The download and installation of applications was no problem at all, but unfortunately after all restart (every morning) the cc ask you a license login.

    I have read this problem in the forum but have not found a solution yet. I'm here or is there a solution doesn't not hack the system every morning the Adobe ID.

    All the best Udo

    Requirements for programs of cloud... scroll down and check each program

    -http://helpx.adobe.com/creative-cloud/system-requirements.html

    I think you are doing something that is not supported, so "odd"behavior is the result.

  • VMware Mirage storage security

    Hi all

    I found the article (#2031614) the Mirage of safety storage configuration are not accessible (see URL).

    • URL: kb.vmware.com/kb/2031614


    Is there an another Mirage from VMware documentation (or KB article), including the measures of security for storage of Mirage ?

    Thank you and best regards,

    Tony

    Hi tonyyeung420,

    Sorry for the inconvenience. Article is available again: VMware KB: configuration of the Mirage storage security

    Kind regards

    Didier

Maybe you are looking for

  • New update will be downloaded today no emails. He says it's to download, but does not work. Old version did. Why?

    This morning, I have restarted Thunderbird. I got a message saying that Thunderbird was installing updates. After that I cannot download my mails now. It says it downloads my messages, but will not. I have an older version that has always download my

  • stuttering when using green screen

    Hello.. I'm doing a film clip on iMovie for an original song that I recorded. I imported the audio of iMovie (10.1.2) and import a video clip of background iPhone that I shot. Then, I filmed and imported an iPhone video of singing me in front of a GR

  • Toshiba A50 has an internal microphone?

    Help, please!Thank you.

  • Xperia Z3 Compact - touch screen unresponsive

    My Z3 Compact went completely insensitive to touch controls. I have read other messages and followed the instructions for PC Companion-implementation to date - repair, but without any change. Since the touchscreen is insensitive it is not possible to

  • WET problems

    I recently replaced with 7 Home Premium 32-bit Vista on my computer. I forgot to use processes properly wet and didn't have my personal info transferred. 7 works well, but all my other files are in the folder windows.old. Can someone tell me how I ca