VMware player 5 - connection in bridge problem

Hi all!

I am writing because I have a very big problem with the network bridged in Vmware player 5.0.2. No matter what I do it just would not work. NAT and host options only work very well and there is no problem with them. My NIC has vmware bridge Protocol, 'automatic connection settings' and "virtual network editor" is set on this particular card. The only thing I can think is firewall (Norton 360) that can block the connection but all of the vmware software components are allowed to work and NAT service works, so I don't know if this could be the case. I would be very grateful for any advice.

I have attached the PDF with screenshots showing my configuration. 


Norton PS options are in Polish, but they essentially say that Vmware is allowed and that inbound netBIOS' / netBIOS name "communication and communication incoming/outgoing ICMP is blocked.

P.S in case of faults of vocabulary and that I'm sorry. p

No, NIC in the host is virtualized / ripped off by the monitor of machine virtual and presented to the customer in a standard way - always cable.  It doesn't matter if the host is using wired or wireless.  Was just letting you know that you can use specific tools wireless in your guest on a virtual NETWORK adapter in this way.  The only way to get into a wireless client is to use a USB wireless adapter and attach that to the guest.  There will of course have to then the drivers for the USB NIC you use.

Tags: VMware

Similar Questions

  • Migration of VMware player for ESXi strike SCSi problem

    Hello

    I'm just a newbee with VMware.

    First, I installed Centos 6.2 on VMware Player.

    Then I download the Virtual Machine on Esxi5 U1 directory using the VMware client. (not the converter)

    Then I tried to use the VHD with creating new virtual machine on ESXi.

    But I got an error with scsi controller when I turn on the machine verual. (i.e. apparently guest OS cannot handle the controller scsi.)

    I tried all types of (e.g., LS logical parallel) scsi controller in the choice, but all are omitted.

    Is there someone like a solution for this problem.

    Josephino

    Welcome

    Using vmware converter standalone will solve your problem.

    try to download https://my.vmware.com/group/vmware/evalcenter?p=converter

    GL

    Thread moved to VMware ESXi 5 to converter
  • Remote Desktop does not work after the recent update to VMWare Player, why?

    I have VMWare Player installed on a host with multiple virtual machines. I like to the DRC to the remote host and I've been in months, but in the recent update to VMWare Player, my connection to the DRC has dropped. Now when I try to the DRC to the host it hangs at "Estimate the quality connection" after I get my user name and password, but then it stops without errors or messages. I've updated the host and rebooted several times, I also tried to DRC from a computer on the same local network as the host with no result. I have a friends in exactly the same problem, connection dropped in the middle of the update and no resolution yet. Help?

    I uninstalled VMWare Player and did a clean install (rather than updating an earlier version) and the problem is solved!

  • VMWare Player wireless adapter question

    I'm relatively new to VMWare Player and have a network problem.  I am running VMWare player with a Windows 7 host and the VM v4.04.

    I use the VPN virtual machine and try to set up the virtual machine with the IP host wireless.


    The virtual computer network is set to Bridged w/Replicate and detects the card physical network, State and IP without problem, however, it does not detect the adapter wireless at all.  It is not in the virtual computer Device Manager, the period of INVESTIGATION, nor the State...

    What would be the right course of action?

    Thank you for your time.

    BTW VMware Player 3.x and later to not install the virtual network Editor by default and you will need to install it manually...

    To install the missing virtual network Editor, the command prompt:

    VMware-player-*.exe -e c:\vmptmp
    

    Then in the c:\vmptmp folder find the file c:\vmptmp\network.cab and extract (double-click on the .cab file) vmnetcfg.exe (virtual network editor) file in the working directory of VMware Player usually 'C:\Program VMware Player' or ' C:\Program Files (x 86) \VMware\VMware Player.  You can create a shortcut and place it with the shortcut of VMware Player, if you want to access it more easily.  Note: there are some for all the files to be extracted to then access the network.cab file.

  • Win 7 32 bit unbootable in VMware Player

    I've been running Win 7 32 bit as guest on VMware Player 3.1.3 OS and have not had any problems. The host operating system is Win 7 64 bit.

    Last night, I ran the player and guest what OS would freeze to the Win Startup screen. All 4 cores in my CPU was pegged at 100% and no further progress. I have reset using the menu player Power & it froze a new start-up. I then powered through the player's menu. When I got to the top, Win prompted me to do a startup repair. II brewed for a long time, and found nothing.

    I reinstalled the guest operating system and was able to start Windows 7. I installed all the updates successfully, including SP1. The next time that I restarted, I had exactly the same problem - the guest operating system wouldn't boot.

    I have now done a repair/installation of VMware player & still having the same problem!

    Anyone has a suggestion as to what to try next? I'm puzzled. It works great once.

    From what I've read so far, it's SP1 that causes problems in the virtual machine. I would recommend not to install SP1 until there is a workaround available solution or VMware is launching a version that supports SP1 supported.

    André

    PS: Just saw Re: VMware Workstation 7.1.3 and Windows 7 SP1 maybe it helps.

  • Configuration connection between two virtual machines on VMware Player

    Hello

    I have a host machine running Windows 7, which is connected to my company's intranet. On this machine, I have two OS guests on VMware Player:

    VM1 - Running Windows Server 2003, in my company intranet

    VM2 - Running CentOS 5, not registered in my company intranet.

    The second of the two is a pre-packaged VM, fully operational to run a complex database system that has been downloaded from the software provider.

    I need to set up the environment such as the VM1, an application can connect to the database running on computer 2.

    For the moment I can do the following with success-

    * Ping the host to VM1 and vice versa

    * Ping the host to VM2 and vice versa

    * Ping to VM1 VM2

    However, I don't do a ping of VM1 VM2.

    Can someone please explain why this is the case? In addition, please suggest me on the best way to get this working environment. I prefer to do the minimum to juggle the VMS as they run important applications. In addition, it is not possible to save VM2 on my intranet, if that would solve the problem.

    Thanks in advance to anyone who takes the time to read and answer.

    EDIT: Just noticed that I am able to access restricted intranet websites through VM2.

    Ahhhh, presto! Easy solution!

    All you need to do is change the 2 virtual computer hardware settings and change the network card.

    RightClick the VM, in settings, then replace the network card of NAT in bridge

    See this screenshot for a Visual:

    http://communities.VMware.com/servlet/JiveServlet/showImage/2-1819012-15730/VMware.jpg

    It's working now?

    See you soon,.

  • VMware Player (VMware Workstation?) Interfere with the connection of the browser

    I installed VMware Player (or so I think) on Vista Home Premium 32 - bit SP2.  Here's what the Properties tab - & gt; Details shows for "C:\Program VMware Player\vmplayer.exe:

    Description of the file: VMware Player
    Type: Application
    File version: 6.5.4.11892
    Product name: VMware Workstation
    Product version: 6.5.4.11892
    Copyright: (c) 1998-2010 VMware, Inc..
    Size: 3.06 MB
    Updated: March 31, 2010 23:31
    Language: English (United States)

    I looked for this in order to make the version of the-what? -VMware Player or VMware Workstation I, and in order to find the right users Guide or manual.

    But this isn't my problem entirely.

    My problem is that I was using my HTTP (browser) client and it has been noticed that I could not connect to certain websites (e.g., http://www.gnu.org/).  I can do that at home, through my wireless router (configured for IP) static on the local network.  Then I go to work where I use the ethernet connection (not getting any IP by DHCP!... configured for a static IP address on the WAN).  I call tech info, that says they can connect.  I think it's because I'm using OpenDNS instead of the name of University servers, and then I enter the "Network Sharing Center' and see 'several networks' and THREE Local (ethernet) connections.

    After that think "WTF?" and think that 2 local connections and 3 are screwing things up, I disable all local connections and re-enable the connection with the hardware ethernet card.  Who has NOT solved the problem of my failed to connect to the web site, that is

    http://grub4dos.sourceforge.NET/

    The service

    http://GSiteCrawler.com/tools/server-status.aspx

    reports the HTTP 200 response code very quickly.  I use this service to see if the info tech group workplace blocks a web site.

    However, I want to learn more about virtual network maps created by the VMware Player (desktop?).  I ran the "vmnetcfg.exe" interface and in the Summary tab, see:

    Virtual network

    Subnet

    DHCP

    VMnet0 (bridged)

    255.255.255.255

    VMnet1 (host only)

    192.168.136.0

    Activated

    VMnet8 (NAT)

    192.168.219.0

    Activated

    The guide I want to read should explain what are these local ethernet adapters and they can interfere with the operation of the host outside of the virtual machine.

    Thank you

    Welcome to the forums!

    The guide: http://pubs.vmware.com/ws7_ace26/ws_user/ws_net.html#989125

    Where is your problem to browse occur? In comments or host?

    VMnet0 is the virtual bridged network. He connected the virtual NETWORK adapter of your guests who are bridge transparently to your physical network device.

    VMnet1 is the network invited only, a virtual, where the host and the guests are members of. You see a VMnet1 NIC on the host, because it's the virtual card that the host uses to connect to VMnet1.

    VMnet8 is the NAT network. It connects to each stack TCP/IP Protocol on the host computer. Therefore the guest may use any communication device that uses TCP/IP. Th egust is hidden behind the NAT device. This means that all packets leaving the host, coming from the prompt appear to come from the host. VMnet8 virtual card is one that connects to the host on VMnet8 virtual network to enable external communication for the customer.

    AWo

    VCP 3 & 4

    \[:o]===\[o:]

    = You want to have this ad as a ringtone on your mobile phone? =

    = Send 'Assignment' to 911 for only $999999,99! =

  • Allows users not able to connect to the server through Vmware Player Flex

    Hi all

    I created a Horizon Vmware server with Flex. Created Windows Image and saved the VM in the Flex web console. The configured policy and gives the right to some windows domain users to use this Image.

    I created a group called "Mirageadmin" and added two users in this group. Mirageadmin belongs to a group of Administrators local and also added to the Administrators group in the console of Mirage . These two users can connexiona Horizon flex web console.

    My problem is that when the user right connect to the server through Vmware Player Flex, its list of username or password is incorrect, please try again. But the user name and password is correct. Later one of the user added to the Mirgaeadmin group policy gives right I. While this user can connect to Flex server via Vmware Player.


    1 should. users entitled be part of the local administrator group of the Flex server?

    2. do I need to add these users right somewhere in the console of mirage?

    Thanks for supporting.

    Hi all

    Turn history on security locally should be set in the server included users who try to connect via Vmware Player.

    Our GPO has been tighten to allow only to administrators and users authenticated to allow log on locally. Adds a new GPO to enable a group of users to log on locally, which solve the problem.

  • VMWare Player-Challenge with network installation to enable the work offline connection-thanks in advance for any help

    Thank you very much in advance for all advice here.

    My situation:

    Developer of novice using a laptop Windows 7 with Ubuntu Server on VMWare Player.

    Customer need and server side development progress on the computer laptop while at home and outside (travel, sometimes without internet/Wi-Fi connection)

    I tried NAT, Bridged, Host-only, and can't seem to find an approach that works offline...

    More details below...

    My question

    How to configure the network to use VMWare player for development while home/away (PCI offline without an internet connection)?

    Thanks again

    Tony

    Other details

    My laptop runs Win7, I use Google Chrome, PuTTY, WinSCP client-side

    My hardware router has an IP address 192.168.0.1

    My VMware - Server Ubuntu - is configured to use the DHCP protocol

    Online I mean a wireless connection to the router and the internet

    Offline - I mean wireless internet connection/no

    Networking networking

    Works ok online. Does not work in offline mode

    When online, I get IP 192.168.0.7 ifconfig in vmware... I can ping the router from the virtual machine and ping the server ubuntu from the command-line to Win7

    Offline... Ping from VM to the router and Ping from Win7 to VM fail.

    NAT networking

    Does not work online or offline

    When 'online' I get IP 192.168.91.128 to ifconfig in VMware, I can ping the router hardware virtual machine ok. When I ping the server ubuntu command line of Win 7 I Request Timed Out

    In offline mode, I get the same IP 192.168.91.128 to ifconfig in the virtual machine. I can't ping the virtual machine hardware router... Destination Host Unreachable. When I ping the server ubuntu command line of Win 7 I have inaccessible Destination host

    Host-Only

    does not work for me either online of offline...

    While online, that is to say that I can get the IP... 192 168 110 128 but the virtual machine can't ping router... Network unreachable. Win7 cannot ping server... Request Timed Out

    While offline, I get the same address IP 192 168 110 128, but VM is unable to ping router network unreachable. Win7 cannot ping server... Destination Host Unreachable

    On the screenshot-VMnet1 as VMnet8 - have APIPA (assigned automatically free private) IP addresses, which should not be the case. Unfortunately I can't tell you what is the cause! Could be something of a facility fails to a VPN client. What you can do, is click on the 'Restore defaults' button in the editor of virtual network or re - install VMware Player (uninstall, reboot the host and reinstall "as Administrator").

    If you have access to the virtual network editor depends on the VMware Player version you are using. With some older versions - which had the "vmnetui.dll" in the installation folder - it was possible to start to operate:

    rundll32.exe vmnetui.dll VMNetUI_ShowStandalone

    André

  • VMWare Player 5.0.2 does not start with Bluetooth keyboard connected

    Hello

    I use VMware Player 5.0.2 on a host Windows 8.

    If I have a Bluetooth keyboard connected to the host, no virtual machine will start. I get the same error every time:

    "cannot find a valid peers to connect to.

    But if I take the keyboard away, then Bluetooth starts just fine.

    Guest operating systems are Vista and Windows 2003. They are all the same in this regard - the same error.

    The error occurs really fast - to the extent that the log files are not updated.

    Latest version of VMware tools is on the guest.

    Any help appreciated gratefully. I can't use the machines without a keyboard, and it's on my tablet computer that I need to be portable. Please note that the issue here is with the keyboard, if there is no Bluetooth keyboard machines act as they should.

    TIA, Pete

    This problem is now resolved.

    My initial assessment was wrong. The problem was to be able to. If I was running the computer on battery, all clients VMware crashed with various strange errors at startup. If the host is plugged into the power outlet, everything works as it should.

    Obviously, on battery, my computer shuts down some capabilities of the processor. Only at full power is everything what it.

    For others who might have the same problem:

    Acer Iconia W700 Core i5, 4 GB RAM, 128SSD. Power to factory settings.

  • How to get the external hard drive to connect to VMWare Player?

    Hi all

    I currently have VMWare Player 3.1.4 and that you have a VM installed on an external SSD that works very well.

    The guest operating system is XP and host operating system is OpenSuSE 11.4.

    The problem is that I have another external hard drive that I want to connect to the virtual machine to store files and other (WD Scorpio Black 320 GB).

    So what I tried was when I opend VMWare Player, I went to add a new SCSI device, found the hard drive, I wanted to use and created it. But when I go in-> "VM" > "Removable devices" > "generic SCSI (SCSI 0:1) ' > 'Connect'-> I get the below error message.

    Device virtual scsi0:1: could not open the device host "/ dev/sdc": not sufficient permissions to access the file. Please make sure that the virtual device is configured to use a Linux generic SCSI device (/ dev/sg *), and that the physical device works normally on the host computer.
    Cannot connect the device virtual scsi0:1.

    Does anyone know if I'm doing something wrong? What are the permissions are they talking about?

    Thanks in advance,

    Matt

    Are back at the office and tested on a variety of Linux Ubuntu and was able to add a second drive HARD/dev/sdb as a physical and even disc was also able to boot from it even if it needs to be dismantled first and I had to start VMware Player using sudo, because I was using a standard account both add the disk and run the virtual machine with the added disk.

  • vmrun suspend problem of VMware Player

    I've been using VMware workstation for a while but recently switched to VMware player 3.0, (largely because of the irritating instllation problems for Workstation 6.5.3 under Ubuntu 9.10 x86_64).

    With my computer, I use the vmrun command close all my virtual machines.

    Despite downloading the latest version of Vmware-vix (1.8.1), vmrun suspend & lt; path to the vmx file & gt; generates this error message:

    Unable to connect to the host

    Error: Type of Service VIX_SERVICEPROVIDER_VMWARE_WORKSTATION

    My reading of the documentation seemed to suggest that vmrun must work with the player as a workstation. Please could someone help me understand what ' I'm missing here?

    Thank you very much

    Enter the code < code > < code > here you use the t on vmrun indicator to indicate that the target is a vmware player? :

    < Code >-T < hostType > (ws| ) Server| server1 | fusion| esx| vc| Player )< code >

    I was able to run suspend with:

    <code>$ vmrun -T player suspend /export/vmware/cmp/cmp.vmx

    </code>

    It is with the version of the player (3.0.0 build-203739) included in VMWare Workstation 7 (on Ubuntu 9.10).

    StarWind software developer

    www.starwindsoftware.com

  • Sumvisin Cyclone MKV Media Player network connection problem

    Hi I recently bought this Sumvision Cyclone MKV HDMI Network Media Player V2, everything was perfect at the start, he was playing files via USB and then I connected to a wired LAN, everything was great, I have Windows 7 ultimate and thought, maybe that's a problem. I didn't have a standing thread throughout the living room, so I bought the upgrade from USB WI - FI £14.99, once again, everything was good, connected and it worked perfectly. But now my problem is that when I go in the NETWORK portion of the menu connection, I find my network, put in my username and password and all I get is "LOGON Failed", I have tried changig my username and password several times now, and everything else I can think of. The box is always connected to the internet which is evident by the internet service still doesn't work. I've updated the firmware with the "Youtube activation", the "Fix Windows 7" and "disabled by default subtitles", but none of these things helped, I just additional options in the menu. I tried so many things now that I'm losing my grip and thinking, that I post here to see if anyone has had similar problems and solved the problem. I'm not too hot on networking and maybe there's a protocol step by step I'm missing.

    Just an additional info, I use a siemens gigaset 4 ports + wireless router I have 3 PC connected via an ethernet cable and I have1 spare ethernet cable for when I do the repairs. My officejet 4670 wireless printer is working fine on my network and can be used by the other PCs at home. I also have nintendo Wii I have ith wireless network connection. As I said, the media player can connect to my router, but it can not connect to my pc through the router, it says my network, but when the username and password is set, it just says: connection failed. I'm at my wits end with this and I have idea o what I am doing wrong, please help!

    Thanks in advance.

    Hi RealGoneKid,

    It can be a problem with the USB adapter that is used when you connect the media player on the network.

    First of all, I would say that you check if it works when you connect the player via a USB cable and check if it works.

    If this does not work when connected via the USB cable there is a possibility that the wireless USB adapter may cause the problem.

    I suggest that you contact the device manufacturer for more support on the issue.

    I hope this helps!

    Halima S - Microsoft technical support.

    Visit ourMicrosoft answers feedback Forum and let us know what you think.

  • VMware Player 6 VM - bridged network (Ethernet/LAN) adapter does not work after upgrade to Windows 10 - known issue?

    Hello

    I upgraded the PC host, but also virtual machines to Windows Pro 10.

    TheVMware Player 6 VM - bridged network (Ethernet/LAN) adapter does not work after upgrade to Windows 10...

    Is this a known issue?

    Thank you!

    Kind regards

    Joe

    SOLVED!


    I uninstalled VMware Player, including the abolition of the configuration files.


    re-installed VMware Player and it worked!

  • problem of graphics screen in OSX Mountain Lion - VMWare Player on Windows

    WIndows 7 or Windows XP, when you use VMWare Player with Mac OS X Lion mountains or the Mavericks, there is a problem of graphical layout.

    I noticed this twice already:

    1. in the system preferences when you try to change the personal image for users and groups. You can see your own image, but trying to change the image of the drop-down list page shows only a blank page. Nevertheless, he is content. When you tic on the blank page, you can change the image, but without visual reference.
    2. I tried iWeb Design in Mac OSX Mavericks. The same situation. By choosing a layout you see a blank page, but it is contained. Try adding that an image or a text always results in a blank page on the screen.

    No idea how to solve this problem?

    VMware does not support the operation of Mac OS X in VMware Player/workstation!  Also, legally virtualisables versions of OS X running in a Virtual Machine cannot be done when done in the Apple brand hardware but when done while running under OS X and for that you have VMware Fusion of VMware Player/Workstation or you violate Apple's SLA for this product.  So any help can you provided for OS X in this use of the scenarios that it would violate the community VMware operating conditions to do.

Maybe you are looking for

  • Sync video and analog data on the same GUI

    I am programming a request that will be followed and video recording IMAQ and given DAQ.  Is there a way to synchornize data during the processing of data on a GUI Viewer displaying the message?  I'm looking to start the video as if it were alive, an

  • ' Windows Live Mail error ID: 0 x 80048849.

    Windows live mail gives me ' Windows Live Mail error ID: 0x80048849Unable to send or receive messages for the Live account.»

  • mini h710p forget right SATA raid after restart?

    Hello I have trouble adding a new hard drive in my existing server. My server is R720 and with 2 virtual disk (the two 3-drive raid 5, HDD SAS) I just want to add a SATA hard drive, so I inserted the disc at the front and Ctrl-R in the raid configura

  • CPL configuration for the handling of source on VCS - E

    Hi all When we tried to have a video call with an external company on the VCS - E, the address IP of CUCM appear in the distant field rather end when making external calls. It occurs because the SIP URI field on the sx device interface has completed

  • phoneListeners must be removed?

    Hi, I have a question: I've set up two headphones in my application: PhoneLogListener and AbstractPhoneListener. I just wanted to know how they work, so I added a different dialog box for each method of these listeners so that I knew how. When I clos