VMware vCenter Orchestrator Server service cannot be started

Similar Questions

• Service server vmware vcenter orchestrator on local computer started and then stopped

  Hello

  I'm unable to start the Server service of vco on Windows 2008 R2 machine. If I try to restart the service it displays the following error;

  "Service server vmware vcenter orchestrator on local computer started and then stopped. "Some services stop automatically when not in use by other services or programs.

  Can someone give me the solution for this?

  Thank you

  Radhika

  First check the configuration of the vCO application and that all green lights. If this isn't the case difficulty what the problem is.

  If everything is green, see the server.log file and look for FATAL / ERROR.

• Error 1067 by starting the VMware Virtual Center Server service after the upgrade to VCenter 4.1

  I've started with VCenter 4.0 update online success in 4.1u1

  but now I can not start the service with Error 1067 by starting the VMware Virtual Center Server service.

  I did the upgrade online in VCenter 4.1u1 with this iso file VMware-VIMSetup-all - 4.1.0 - 345042.iso and now the entire production is declining.

  I use SQL Server 2005 32-bit as the database.

  Any kind of help would be greatly appreciated please?

  I guess it's all true by:

  http://KB.VMware.com/kb/1022104

  http://www.VMware.com/support/vSphere4/doc/vsp_vc41_u1_rel_notes.html

  And what exactly is a failure, is the DB on a different server or living on the vCenter Server?

• vCenter Server Service does not start after P2V

  Hello community.

  A problem that I have not been able to solve and looking for help.

  Problem:

  vCenter Server Service does not start after that Windows Server was P2V would be.  We get an ERROR 2 of the Service.  Get the error of the system Windows 7024 event log.

  History:

  The client, I currently work with that tries to smash to the high location of the DEV VCENTER.  Location of DEV vcenter works now all for this site (domains, dns and all development servers).  If its VCENTER PRODUCTION of this location.  Currently, SQL Server (dedicated to vCenter), VCENTER and SSO are all sitting on the same box.  Let's break the SSO, SQL and VCENTER in their own servers.  However, the client wants to re - use the current physical server for SQL Server.  So I need P2V physical server existing until I can start the new environment.

  I was able to get all of the services working on the virtual vCenter (SQL, SSO, Update Manager etc etc) but have been unable to get the real vCenter Server Service works.  Fails every time with the 2 ERROR Code.  I was unable to get a KB of VMWARE item that corresponds to the issue I'm having.  ERROR 2 code has many articles and none have worked.

  Details:

  vCenter 5.1 Build 799731

  SQL 2008 R2

  Windows 2008 R2

  When the vCenter Service tries to start it will stop at the 50% mark and gives this error: (I removed the names for security reasons)

  Windows could not start the VMware VirtualCenter server on <server name>. For more information, see the system event log.  If it is a non-Microsoft service, contact the service vendor and refer to service 2-specific error code

  When I saw the Windows system event log I get this error:

  EVENT ID: 7024

  The VMware VirtualCenter Server service stopped with the error special service that the system cannot find the specified file...

  When I go through the vpxd log file I see this at the end of the newspaper: (I removed the names for security reasons)

  2013-12 - T 03, 16: 08:21.843 - 05:00 [info 09168 'dbdbPortgroup'] [VpxdInvtDVPortGroup::PreLoadDvpgConfig] loaded config VGA objects [0]

  2013-12 - T 03, 16: 08:21.844 - 05:00 [info 09168 "authvpxdMoSessionManager"] [OSP] [SessionManagerMo::Init] Admin URI value: https:// < name of vcenter server: Port #> / sso-adminserver/sdk

  2013-12 - T 03, 16: 08:21.844 - 05:00 [09168 "authvpxdMoSessionManager" info] certificates [OSP] [SessionManagerMo::Init] download m root...

  2013-12 - T 03, 16: 08:21.858 - 05:00 [01440 info "Default"] wire attached

  2013-12 - T 03, 16: 08:21.880 - 05:00 [09168 error 'vpxdvpxdMain'] [Vpxd::ServerApp:Init] Init failed: unexpected exception

  -> Backtrace:

  -> backtrace [00] rip 000000018018977 a

  -> backtrace [01] rip 0000000180100 c 98

  -> backtrace [02] rip 0000000180101fae

  -> backtrace [03] rip 000000018008aeab

  -> backtrace [04] rip 00000000005 b 4971

  -> backtrace [05] rip 0000000000551298

  -> backtrace [06] rip 00000000005516 c 9

  -> backtrace [07] rip 00000000004c0fae

  -> backtrace [08] rip 00000001405bbfb8

  -> backtrace [09] rip 000000013f4b0078

  -> backtrace [10] rip 000000013f4b016a

  -> backtrace [11] rip 000000013f4b0279

  -> backtrace [12] rip 000000013f4b0609

  -> backtrace [13] rip 000000013f7f2903

  -> backtrace [14] rip 000000013ff9e4b9

  -> backtrace [15] rip 000000013ff9835c

  -> backtrace [16] rip 00000001401b8a3b

  -> backtrace [17] rip 000007fefedca82d

  -> backtrace [18] rip 000000007783652d

  -> backtrace [19] rip 0000000077ccc521

  ->

  2013-12 - T 03, 16: 08:21.881 - 05:00 [warning 09168 'VpxProfiler"] ServerApp::Init [TotalTime] took ms 4603

  2013-12 - T 03, 16: 08:21.881 - 05:00 [09168 error "Default"] could not initialize VMware VirtualCenter. Closing...

  2013-12 - T 03, 16: 08:21.882 - 05:00 [09168 "vpxdvpxdSupportManager" info] free/busy information wrote

  2013-12 - T 03, 16: 08:29.280 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-39d3665d =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms

  2013-12 - T 03, 16: 08:41.280 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-da6b3df9 =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001

  2013-12 - T 03, 16: 08:53.281 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-5086bf7f =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001

  2013-12 - T 03, 16: 09:05.282 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-3abd7c64 =] VpxUtil_InvokeWithOpId [TotalTime] had 12000 ms

  2013-12 - T 03, 16: 09:17.283 - 05:00 [00788 WARNING opID "VpxProfiler" SWI-b9c8c88a =] VpxUtil_InvokeWithOpId [TotalTime] took ms 12001

  2013-12 - T 03, 16: 09:17.353 - 05:00 [info 09168 "Default"] forcing of VMware VirtualCenter stop now

  I pulled the virtual machine in a laboratory and all network problems that would be removed to isolate.  Now the VCENTER is shouting at this topic it can't find one of its guests in the vdxp log, but that shouldn't matter.  All Services have been changed for local accounts.  All network and ODBC parameters are able to see the server... aka the server can see.  I didn't remove any software or drivers for the VM (techniques it is my third P2V to the same server for testing reasons)... And the only thing that won't start is always VCENTER SERVER... SSO is started, SQL is launched...

  Also everything remained the same on the virtual machine (DNS, IP, NAME etc etc). Stop the physical and start-up it upward don't show any problems.  Only when its summer P2V would have done that themselves.

  I can't get this number.  Need help.

  Thoughts?

  Thank you

  BostonTechGuy

  In this case, we have finished rebuilding the vCenter and all migrate on.  Wish had better put up-to-date, but ultimately, it's what has been done.

  Thank you

  BostonTechGuy

• vCenter Server service does not start after you run Windows updates

  On a regular basis, my vCenter Server service fails to start after the automatic updates of windows are applied.  The vCenter server is a datacenter 2008R2 VM.

  The only other running applications are PerfectDisk and agents of ESET NOD32 - vCenter is in 4.1.  I tried to adjust the vCenter Server and WedAdmin service of delayed start, but that doesn't seem to make a big difference. The following errors are displayed in the case of the newspaper which lead me to think the issue is related to SQL:

  SQL Server is not ready to accept new client connections. Wait a few minutes and try again. If you have access in the error log, look for the informational message that indicates that SQL Server is ready before trying to connect again.  CUSTOMER:: 1

  The description for event ID 1000 from source VMware VirtualCenter Server can not be found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

  If the event is on another computer, the display information had to be saved with the event.

  The following information has been included in the event:

  Could not initialize the VMware VirtualCenter. Closing...

  the message resource is present, but the message is not in the string/message table

  Anyone encountered this before?

  Hello.

  I didn't know this, but the info in Ko 1007669 may be useful.

  Good luck!

• VMware vCenter Orchestrator Configuration problem

  Hi guys,.

  My company has just installed VMware vCenter Orchestrator and we try to create a new host to vCenter server with version 5.0.1.

  Can someone point me to documentation that shows me how to configure the web page in the print screen attached?  Or can someone please tell me what is needed in the empty fields, etc.?  When we try to enter info, we get alerts of service of red light of the vCenter Server tab and the tab startup options.  Both give us a red circle indicating a problem.

  Thank you!

  A free IP address? Oh... No, this plugin configuration is not actually CREATE a vCenter for you, it allows you to configure the vCO to speak to an EXISTING vCenter server you must already have a server vCenter configuration somewhere and you must use the FULL domain name or address IP of this server in this configuration.

• Message: "the Security Center service cannot be started. I am running Vista, fully up to date with AntiVirus & Anti Malware, & others. Unable to change the center of security of people with DISABILITIES.

  Message: "the Security Center service cannot be started. I am running Vista, completely up-to-date with Avira AntiVirus, Malwarebytes - Anti-Malware, MS/scans of Windows Security Center (for example MS Fix It programs Center), etc. No Malware has been found. Despite me trying to re - set the Security Center using start > Services > SecurityCenter > change to "Automatic (delayed start)" people with disabilities > start > output the re-creation is not the owner and I'm back with no security - with the same message as the original. I spent hours trying to deal with this. There is no known new applications/programs, and the problem started about 3 days ago. Help requested - thanks. JohnG - Sydney

  Hello

  ·         Are you can change the Security Center service parameter by using a different user account on the computer?

  I suggest you to make sure that Windows Defender is running. Follow the below mentioned articles and check.

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you perform the clean boot and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: If the method above is not enough, then I suggest refer you the link try the steps and check if that helps:

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  http://support.Microsoft.com/kb/2255099

   

  Note:

  You can back up data to an external hard drive and no CD. It is essential to back up data even if you do an upgrade on the spot.

  If you are using the original computer and the new laptop image, you will need to purchase a product key to activate the copy of windows installed on the laptop.

  Hope the information is useful.

• Tidal Enterprise Orchestrator Server service is stopped.

  Hello

  I try to install tidal Enterprise Orchestrator in Server 2008.

  We managed to install the application.

  I built the Server 2008 which is acctually followed by requirements in order to install TEO.

  But "Tidal Enterprise Orchestrator Server service" has not yet begun.

  When I started service TEO, the underside of the messages appeared in the Windows event log.

  ------------------------------------------------------------------------------------------

  Unhandled exception has occurred.

  Tidal Enterprise Orchestrator Server service is stopped.

  System.NotSupportedException: Named member is not supported in a dynamic module.

  System.Reflection.Emit.AssemblyBuilder.get_Location)

  ------------------------------------------------------------------------------------------

  Any help is appreciated.

  Shinya salvation!

  There could be several reasons why the service does not start. Support should focus on your newspaper, so please do the following...

  (1) send an email to [email protected] / * / with your Cisco ID and the question

  (2) generate logs of the server by going to start-> programs--> Cisco--> TEO-> Diagnostic Utility. Run this wizard and take the defaults and have these ready logs for the Customer Support engineer who will contact you after receiving your ticket.

  (3) a couple of quick things you can do compared to Windows 2008 are:

  * Make sure that UAC is DISABLED

  * Make sure that you can access the cryptographic keys. This by going to C:\ProgramData\Microsoft\Crypto\RSA\MachineKeys, you probably need to enable hidden files/folders see this path. Try to open one of these files in this directory. If you * don't * you will need to save in the MachineKeys directory and give everyone access to this directory.

  in any case, we will look forward to see your SR come and help!

  Thank you

  Shaun Roberts

  TEO support team leader

  [email protected] / * /.

• Message: The security of Windows service cannot be started

  I get a pop-up windows security problems:

  the Windows security service cannot be started

  How should I do, please?

  Moved from Community Participation

  Original title: windows security

  See if this helps: http://support.microsoft.com/kb/2519899/en-us

• My Security Center is turned off and I can't turn it back on. When I click on the Tower on the box, I get a message that the Security Center service cannot be started?

  My Security Center is turned off and I can't turn it back on. When I click on the Tower on the box, I get a message that the Security Center service cannot be started? What makes me to start security do you recommend?

  My Security Center is turned off and I can't turn it back on. When I click on the Tower on the box, I get a message that the Security Center service cannot be started? What makes me to start security do you recommend?

  Start button > in the search box, type services > press the Enter key > uac prompt > scroll Security Center, click...
  topic status, it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say this, do a RIGHT click on Security Center > in the new window, make the necessary changes...
  the startup type, click on the pointer, and then select Automatic (delayed start)
  the service status, click start
  Click OK when finished. For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Windows backup error the service cannot be started, either because it is disabled or because it has not enabled 0 x 80070422

  I tried to understand this and have failed so far.

  Using the Control Panel, system and security, backup and recovery. Click the backup set,

  Pop up - select where you want to save your backup. I select the 4 TB drive that I just

  put in my system (and the recommended player). I click Next, and then select Allow me

  Choose and click Next. The next window - what you want to backup? Data files are already

  selected by default, and then I select the disc Local (c), include an image of disk system: EFI system

  (C) partition is already checked by default. Click on next, the next window - see your back to top

  settings, click on save settings and run the backup and that's what I have.

  The service cannot be started, either because it is disabled or because it has not enabled

  associated devices, (0 x 80070422

  I checked the services which apply to Windows backup and tried the auto configuration instead of

  Manual.

  I tried this search on the Internet and so far all I've found is not

  fixing the problem.

  Original title: set up backup Windows does not.

  Thank you for your help. I fixed the problem I had. It was caused by the settings in the

  Samsung magician optimization settings. Recently, I had put in a Samsung SSD EVO 850.

• The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  When I try to open security as Malwarebyte Anti-Malware programs or open Control Panel, security, device management and several other items in the Panel I get the message "the service cannot be started, either because it is disabled or because it has no enabled devices is associated to him."  I started windows in safe mode and ran Malwarebyte Anti-Malware and McAfee and a Trojan horse has been deleted, but I still get the message on several applications when I try to open them.  I tried to set up another account, but when I go to the Panel, user accounts and family safety and try to select Add / delete user accounts, I can't seem to open.  When I click on it nothing happens.  Any ideas would be appreciated!

  Virginia lace:

  I finally solved the problem - I went in Safe Mode W/Networking and then on Windows Installer and Windows Installer of Module (and other things as well as unforunately that I remember).
  In any case - if worse comes to the worst, go to Mode safe mode w/network and pull up your Windows Services, then just turn each window / Microsoft service on which you can (set to start automatically) - orrat less start with Windows Installer Windows Installer of Module and see if that solved the problem.

• The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him. (0 x 80070422) attempt to run the Windows backup utility.

  I get this message every time I try to run the Windows backup utility.  All the services are rundning according to the instructions of Microsoft experts on the same issue.

  Original title: the service cannot be started, either because it is disabled or because it has no enabled devices is associated to him. (0 x 80070422)

  Hi Charles,

  Welcome to the community Microsoft and thanks for posting the question. I'll certainly try and help you perform the backup.

  Until we start could you give us some more information?

  1. Since when are you facing the issue?

  2. you have any anti-virus installed on the computer program?

  3. What are the troubleshooting steps correct you have taken to correct the problem?

  4. are you aware of any changes made to the computer before the show?

  I suggest you to re check the service as long as this error usually occurs if one of the services required for the backup Windows for work is disabled or has not started.

  To check the services, click Start, in the Start Search bar type services , and then press enter.

  Please check that the following services are enabled:

  -"Remote Procedure Call" (RPCSS) must be active, Automatic.

  'COM + Event System"(System events) must beactivated en, Manuel.

  -'System Event Notification Service"(SENSE) must be active, Automatic.

  -"Volume Shadow Copy" (VSS) must beactivated en, Manuel.

  'Microsoft Software Shadow Copy provider' (SWPRV) must beactivated en, Manuel.

  Once you make changes according to the above specifications, you can try a backup and check to see if that solves the problem.

  I also suggest you to run a SFC scan (System File Checker). This will replace the corrupted Windows files.

  Here are a few articles on Windows backup.

  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

  http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions

  Hope this information was helpful and let us know if you need assistance in the future. We will be happy to help you.

• The SSTP service cannot be started

  I am trying to share a connection, but cannot start service ICS - error 1068 - the dependency service or group was able to start. I followed the dependencies and the failing service was Manager of remote access connections. He is unable to start because the SSTP service cannot be started. When I try to manually start the SSTP Protocol it gives me a message "Socket Tunneling Protocol Secure Service on Local computer started and then stopped. Some services stop automatically if they are not in use by other services or programs"I changed the startup type to automatic, but nothing helped. My Windows is build 7600 with all updates applied. My computer configuration is C2Q 6600, Asus P5QL Pro, nV 9600GT, 2x2gb Apacer.

  EDIT: I followed this guide by removing dependence on SSTP but now it gives me error 87 - incorrect setting instead of 1068.

  So finally I solved my problem! I removed the RasMan (Remote Access Connection Manager) of the ICS service dependency and therefore probably broke support VPN and Dial-up . Here is the solution for those who have the same problem. Everything you do is your own responsibility!

  Press Windows key + R to open the Run dialog box. Type Regedit . Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\ then right-click SharedAccess, and choose export . Save the file, so you have a backup if you want to restore the settings the easy way. Now open SharedAccess, double-click DependOnService , and remove the entry RasMan . Restart the computer and now ICS works perfectly. Make this "tweak" will probably break the VPN and Dial-up support!

• Windows 7 Services - Server service is not started

  How to start the server under windows service.

  My Server service is started, but when I use this command to display the status of the Server service.

  It shows this message

  net helpmsg 2114

  Server service is not started.

  Thank you.

  You must set the 'Server' service 'Autostart '. If it is already, run eventvwr.msc to see why the Server service does not start automatically.