VMware View 5.3.1 and functional level Windows 2012 R2 Active Directory

Similar Questions

• When I turn on my computer it tells me that I need to activate windows. I click on 'YES' it takes me to the activation page and says that Windows is already activated.

  Windows XP Activation loop.

  When I turn on my computer it tells me that I need to activate windows. I click on 'YES' it takes me to the activation page and says that Windows is already activated. All I can do is, click 'OK' and he takes me into a log on screen with my name on it and goes through the same process, as described at the beginning of this statement. I'm in a loop. The only way out is to wipe my hard drive and reload windows new who, within 30 days, it will do no doubt once again. How to do this?
  For 3 years I rebooted my computer. That's why I reloaded it in the first place. I sent this version of Windows XP by Microsoft and have recharged the system at least 4 times in the past 10 or 11 years.

  Ken

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you to see link below and check if it helps.

  You are prompted to activate Windows XP or Windows Server 2003 every time that you start the computer:

  http://support.Microsoft.com/kb/312295

  Hope this information is useful.

• Domain controllers Windows 2008 R2 with the forest functional level Windows 2003 taken over after the end of Windows 2003 support in July 2015

  Hello

  Anyone know if the Windows 2008 R2 with Windows 2003 forest functional level domain controllers will be always supported after Windows 2003 support ends in July 2015?

  Thank you

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Server domain membership in the group Windows 2003 functional level - windows API

  Hello

  I'm a programmer trying to get the members of a group of global domain by using windows server 2008 enterprise edition

  in the past it was not a windows server 2003 functional level, but when the 2003 functional level appeared a new features have been added such as the addition of

  a global group as a member of another global group in the domain,

  in the past, the written API could obtain the Member if the Member is a user, but you cannot find a member if it is a global group.

  I use this "NetGroupGetUsers" API to get a members of a domain global group and he gets the users but it does not get the

  Members if they were global groups...

  I tried an other API "NetLocalGroupGetMembers" it becomes a global group as a member but it only works if the owner was a local group on the server
  or on another machine which is added to the server, but this API does not work if the owner of the Group was a domain global group.

  My question is how to get the members of a global group whose members who are global groups too?

  Thank you

  -Shomaf

  Try asking in the Windows Server forum:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Three companies using Windows Server 2008 Active Directory and physical locations?

  The research of three companies using Active Directory in Windows Server 2008 and also how many physical locations?

  Answers forum is addressing issues technical home user.

  If you don't have a technical question, you can try to use Bing to search for the information you are looking for.

  If you are having problems with Active Directory, you can create a new post on the TechNet forums for assistance.
  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• MAB with ACS (internal store) and 802. 1 X with Active Directory (external store)

  Hello

  at the moment we´re using ACS MAB. Every Mac are stored as internal hosts on GBA. I want to migrate to 802. 1 X.

  Users have AD. During the migration, I need MAB and 802. 1. X is it possible to use the database internally and externally at the same time to the

  same access strategy?

  Concerning

  Horst

  Hello Horst-

  Yes, you can do this by creating an "identity" store sequence and fix the two AD and the data store is internal to it. Take a look at the link below:

  https://supportforums.Cisco.com/document/103901/ACS-5x-identity-store-sequence

  Thank you for evaluating useful messages!

• View Manager does not load at startup (Windows 8 - confirmed activated in the Task Manager / start)

  During the recent update MDD, I can't get it to load automatically at startup.

  I am running Windows 8.1.

  I have to run it manually every time that I boot - which is a pain.

  I activate under via Task Manager startup items (oddly there are two DDMs that appears here, both are enabled).

  Any advice / help?

  Thanks in advance!

  It seems that you have installed the display manager Dell with privileges "Run as administrator". DDM cannot load automatically with this option for reasons of security, that is, it cannot start without the explicit permission of an administrator - Windows does not.

  Right-click on the MDD program or shortcut and select Properties, then cliquer click on the Compatibility tab, uncheck the box "Run this program as Administrator" and then click on "change settings for all users.

  Or just reinstall it with the "Run as Administrator" option unchecked. DDM itself doesn't require elevated privileges.

• Desktop computer and the creation of VMware View pools

  I tested VMware view in a lab and got stuck on the addition of a pool of offices.  I have followed the guide "Getting started with VMware View" and encountered no errors up to this point.  I have a Windows XP VM and cloned it to a model.  I'm on the "Parent VM" section in the "Add Desktop" Wizard, but I don't seem to have an option to choose.  It displays my data center, but it is grayed out, so there is nothing to select.  I also noticed a note in the Parent virtual machine window saying that all VM at least one software component plug-in is filtered from the list.  I went back to the VC server and created a wink, but I don't see an option in the window.  Am I missing a step somewhere?

  On the assumption that youv'e ' e ' ipconfig/release', turning the machine off and then taken the snapshot--master

  If it is just a superstition of the mine, if you have tried everything else, try turning it back on the basic machine (master), after creating the snapshot.

  Thank you

  .. .pjpg

• VMware View and vSphere/ESX4

  I never tested with VMware View in any installation ESX so please forgive my ignorance on the subject.

  What I've read, I know that VMware View is not currently supported under vSphere but it should be later in the year.

  My question is: is it possible to run VMware View in vSphere/ESX4 and y at - it not crash you have experienced? I have a few clients who want to start a project with the product, but I'm tired to sell it to them without knowing if it is possible to run in vSphere or not.

  As I understand it, VMware View is just a series of virtual machines (View Manager for the management) and several other virtual machines for delivery of operating system invited to end users, so I think its possible to run, just not supported.

  Can anyone shed some light on this for me? Thank you.

  jjohnston1127 wrote:

  Thanks for the reply.

  Exactly how desktop computers are delivered to the end user? They give you a connection with the VI Client to vCenter and displays the available machines, they control?

  Display Client, Thin Client or View Portal (browser). Basically, we use RDP as the main Protocol for now (PCoverIP is the slate and many talked of the future Protocol). In simple terms, us tie in with the AD. The user connects by using one of the methods mentioned. The broker for connections check the user/pass, see what desktop computers - if any - they have right to and presents this list to the user. The user selects and then, if the SSO is enabled, records in their office environment. They have several desktop computers and screens (up to 4) if necessary.

  When the view is supported for vSphere and released, you know / think it will be difficult to migrate from individual offices shared through the clones related, or computers is - same not possible?

  God I hope not. For now, I have no idea, but I imagine they would create some sort of upgrade. View Manager is nothing else than a web application.

  I'm sure I think other issues later, but I can review the product documentation to answer most of them. I wanted to just grab a little better quickly because I have an appointment in an hour or two with a client

  Documentation has made a huge difference and give you a better idea of how this works.

  You want to make a difference in the future of VMware products? Feature to ask your ideas ( http://www.vmware.com/support/policies/feature.html )!

• Overview of VMware View 5.2 Load Balancing

  Hi guys,.

  I use VMware view Horizon 5.2 and my infrastructure is as follows:

  2 view x servers security

  2 view connection x servers

  Can anyone please guide me how to configure load balancing and what are the best practice Horizon of VMware View load balancer configuration.

  See you soon

  http://pubs.VMware.com/view-52/topic/com.VMware.ICbase/PDF/horizon-view-52-architecture-planning.PDF

  Simply place your load balancer in front of the two security servers. This is indicated on page 70 - figure 5-2.

  If you also want to allow access by internal users, and then add two replicas more connection to the server. This is indicated on page 71 - figure 5-3.

  Your reviews will connect to the alias balanced appropriate load.

  Mark

• View of the horizon and 'Blast' Protocol

  Hello

  I have recently updated our login servers and security to view Horizon 5.2 and I see the option to enable HTML5 pool access, but it indicates that an office feature pack must be installed.  I was not able to find this "feature pack" anywhere.  I've been through the administrative guide for 5.2 and it really do anything don't speak HTML access.

  Can someone point me in the right direction so I can start to do some tests with HTML5 access to desktop from view?

  Thank you!

  According to the notes of https://www.vmware.com/support/view52/doc/horizon-view-52-release-notes.htmlversion:

  These components will be available shortly after the general availability of VMware View Horizon 5.2 and may subject to availability of the app in various application stores mobile device.

  I feel your pain, I was really looking forward to test access HTML 5.

• W7 64 bit VMWare View client do not connect with VDI

  Hi guys, I installed the x 64 client vmware view on a W7, and I'm not trying to connect to a VDI from him. When I try to open the connection with the view server I have the following error

  "vmware client view server returned an invalid or unrecognized response".

  I took a quick glance to vmware \AppData\Local\VMware\VDM\log files and I saw the following error codes

  2012-12-27 09:43:58, 936 DEBUG < MessageFrameWorkDispatch > [wswc_http] ErrorCode WININET is 12152

  Anyone know why this error occurs for the 64-bit client?

  Thanks in advance

  Hello..

  Yes! You can.

  This is for you - compatibility matrix

  http://pubs.VMware.com/view-50/index.jsp?topic=/com.VMware.view.upgrade.doc/GUID-E9BB81A4-1054-4BBB-A43B-CB60A6EF909E.html

  Concerning

  Faisal

• VMware view client have support ubuntu?

  I'm going to depploy VDI environment. But there are many os (windows, mac, ubuntu and centos). Please help me how to install vmware see run on Ubuntu. Thank you

  Maybe http://blogs.vmware.com/euc/2012/03/vmware-view-client-for-mac-and-linux-are-now-generally-available.html can help.

  André

• VMware View Client can 'close' host Windows 7?

  Can VMware View Client 4.6 'close' a client Windows 7 physical host device when it is turned on (Thin Client or desktop running Windows 7)? The behavior desired is to let the user simply turn on their thin Client or a desktop computer running Windows 7 Starter Edition or another version of Windows and not Windows desktop appears. The VMware View client connects directly to the broker and then to the VM user login screen? The customer or the user of the Dektop can simply access the connection of the user view not the physical host Windows box?

  For XP/XPe installed locally on you thin client, you can change the default shell of Explorer to wswc.exe (Customer View). More information about this you can read here: http://blogs.vmware.com/view/2009/02/vmware-view-client-as-a-shell-for-xpe-and-xp-pro-clients.html

  According to me, this thing with some addition settings should work with Win 7.

  There is also some proprietary software, for example: http://www.thinlaunch.com/thin-desktop-client.asp

  UPD: Guide step by step for Win 7 Ultimate, business and professional: http://communities.vmware.com/message/1639813?tstart=0

• 64VMs limitation of VMware View by LUN CF

  Hello

  I couldn't find, why VMware View has limitation of 64 VMS pre a fibre channel LUN?

  It is limitation of View Composer or any other components of VMware View?

  I read this limit on any web and guides, but I can't figure out why?

  Thank you

  Maros

  http://myvirtualcloud.NET/?p=1155

  A review of VMware View 4.5 limits and ceilings

  Limits

  Limits may vary depending on the versions and the versions in use. Therefore, it is important to understand that the limits presented here are a combination of the following: VMware View 4.5, 4.1 vSphere and vCenter 4.1.

  -8 hosts per cluster (including 1 of relief)

  Limit defined by the View Composer.

  -16 VMS per CPU (NEW! before was 8)

  -512 clones by Replica or office (for linked cloning) pool

  -64 VMs per LUN

  Applies when you use the table of Fibre Channel only. No limit for iSCSI or NFS

  -10 000 VMs in vCenter (NEW! already 3000)

  Limit is variable and varies according to the vCenter activity (power on and out, reconfiguring, cloning, etc.)

  If I'm not mistaken that has a limit on the number of related clones, you can have per LUN.  It was on an older version of view and was found in one of the reference architecture.   I tried to search this document but couldn't locate it.

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

  Twitter: http://twitter.com/mittim12