VMware vSphere: install, configure, manage [V4] still applies for VCP 4.1

Similar Questions

• VMware vSphere: install, configure, manage [V5.1] correct review and practice test

  Dear all,

  Here, I'm a bit confused so I need help to clarify which exam I have to take and what is the matter with this review. I took the course VMware vSphere: install, configure, manage [V5.1] and when I tried to register for the exam, he gave me the review "VCPD510: VMware Certified Professional-Desktop ' and when I tried to find some documents to study, I found two different materials, which relates to the VCP5-DT, which is all about VMware View: install, configure, manage [V5.x] and the other which is VCP - 510. While we should I study.

  Help, please.

  Hi mariusme,

  The review, you have to take is VCP5-VTC. VCPD510 is for desktop, which is entirely different. Please go to the vmware certification page and select VCP5-DCV(vmware certified professional in datacenter virtualization) and you will find the action plan. You can follow it, and since you've followed the required courses, you will be eligible to take the certification. And also sign up for VTC - VCP on Vmware Portal before you book review on PearsonVUE.

• Fact the VMware vSphere: install, configure, manage [4.0] class eligible for VCP5 prereq?

  Hi all

  Doing some research, but has not been able to confirm.  Also left message with our VMware training rep areas last week, but never heard back, so thought I would try here.

  In 2011, I finished the VMware vSphere: install, configure, manage [4.0] courses.  I never did get my VCP4, but now want to try for my VCP5.  This class would qualify as a prereq so that I can just take the VMware vSphere: What's New (version 5.0) courses?  The web site called specifically need to VMware vSphere: install, configure, manage [V4.1] class so I think not, but I wanted to check.  I would take the shorter, which is the new class rather than a class 4 or 5 days on vSphere 5.0 so I can.

  Can anyone confirm?

  Thank you

  Bob

  No problem, this path has always been available for VCP5.

  And Bob, the counties of 4.0 class, as well as class 4.1 - is only the class 4.1, which is referred to as the class 4.0 retired some time ago and has been removed from the page VCP5 when he retired.

• different between "VMware vSphere: install, configure, manage [V4]" and "VMware vSphere: Fast Track [V4]" "

  can someone help me understand different between "VMware vSphere: install, configure, and manage "and"VMware vSphere: Fast Track ", first becuse is about $3,000 and another is about $5000. "

  Thank you

  can someone give me some information about the rules of absente, homework and laboratories, in these classes online.

  You must participate in daily.

  You need a good Internet connection and a fixed phone or a headeset.

  Online courses are generally in central time... but in some cases may be different.

  also should I take a test on these classes?

  NO.

  just be present on these days of class?

  Yes

  I mean those class just for learning or at the end of these classes, I have to pass an additional examination for them?

  The VCP410 exam to be held in a centre VIEW (www.vue.com)... for the use of recording the same e-mail that your use of the course.

  André

• Not enough memory RAM for EDU-ICM-1301 - VMware - SAMPLE Training Services - on request in the system class: vSphere install, configure, manage course 5.5

  Hello

  I'm looking for the laboratory "EDU-ICM-1301 - VMware education Services - SAMPLE - in class on request: vSphere install, configure, manage course 5.5" but trying to follow the instructions

  LabFiles\vCenter GA Installer

  3. Double-click autorun.exe , click run.
  4. If the security warning dialog boxes appear, click run to continue.

  the installation does not work with because the memory is not enough.

  Have you ever tried this workshop?

  You have a solution for this problem?

  Thank you

  Hello

  Yes we have seen several times.

  The simple solution is to install ONLY the Client vSphere and not all vCenter Server.  Specified in the manual, but it is up to the user that installation of the client is the option left on the halfway point in the Setup user interface.

  Thank you.

• Is VMware vSphere: install, configure, and manage a must for the VCP4 certification of the course

  Is it possible to learn by myself and then pass the test. I really want to take the exam, but don't have four full days of training. Can I read onlind documentations, as well as working with VMware VC and ESX servers, so I have no chance to proctise. Thanks in advance!

  Yes, you must take an official course of the exam!

• OLIVIER 11.1.1.7.1 problem installing Configuration Manager.

  Hello

  Installed OLIVIER 11.1.1.7.1 on Windows 7 64 bit.

  Apply Patch ATGLite

  step 1: Update the schema BIACOMP

  sqlplus < schema_BIACOMP > / < password_DW > @ < db > @ < ORACLE_HOME BI > /sdf/DW/ATGPF/sql/fndtbs_11170_upg.sql

  step 2: apply the updates of the seed data

  Note: this step applies only to Linux and UNIX facilities. For installations of Windows, the script required for this operation is not currently available. To find out when a specific Windows script will be available, check Oracle Fusion Middleware Release Notes for Oracle Business Intelligence Applications.

  Jump to step 2 there is no update on Oracle Fusion Middleware Release Notes for Oracle Business Intelligence Applications.

  
  

  Trying to access the Configuration of BI Apps using URL Manager:
  http:// < Host >: 7001/biacm is mistake out with messages below:

  Error 404 - not found

  Of RFC 2068 Hypertext Transfer Protocol - HTTP/1.1: 10.4.5 404 not found Server not found anything matching the request URI. No indication is given whether the condition is temporary or permanent. If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.

  Help, please.

  Thank you

  Neeraj

  you give INCORRECT for BIACM use 9704 poart port

  second access with this url

  http:// : 9704/biacm

  It may be useful

• VMWare vSphere install on a machine have an operating system already installed

  Hi guys,.

  I'm new on the VMWare products and I can't use VMWare specific terms when asking a question.

  I wonder if it is possible to do the following:

  Install vSphere to hardware that is already hosting a Windows 2003 server operating system. This Windows Server operating system would become the first VM for this platform. Then, we would add VM more to the system. We would like to avoid to remove the current operating system, and then install vSphere, followed by the installation and the configuration of the current Windows operating system as a machine virtual.

  Best regards

  Zoltan

  Post edited by: zoltnagy

  Hello

  you are weclome, please mark my answer as being correct.

• VMware vsphere client is in the "inventory loading" for a long period, then received a message from "time out

  We have two type network connection in my lab, one is internal net, all computers on this network type internet access themselves, but they could access the internet through a proxy server. one is external net, all computers on this network type internet access themselves.

  If my connection to the computer's internal network, the client is responsible for the inventory for a long time when I use VMware sphere client to connect to the VMware Server and give a message "connection error". below two screenshots are for the description of the error. But if my connection to the computer is net externally, I can connect to vmware server successfully.

  

  Here is the description of my VMware Server infrastructure:

  My vmware server has two network adapters, vmnic1 and vmnic0. vmnic1 is used for the internal network, vmnic0 is used for external NET. I put a serval host in my vmware server, one of them is used for the proxy, all the computers in my lab can access internet through this proxy host via vmnic1.

  Proxy host, I add two configurations for iptables as below:

  iptables - table nat - append POSTROUTING - out-interface eth0-j MASQUERADE

  iptables - append forward - interface eth1-j ACCEPT

  Further, I have another server in vmware, I also can connect to vmware server successful if my connection to the computer's internal network. and this server network two are the same.

  How can I debug this problem? Thank you very much!

  Management is necessary for both networks separately?

  Because if not, you can move the Group of management to the internal network on vmnic1 ports...

  Create a vmkernel port and turn it on to management, assign an IP address and it should be possible to connect to the internal network.

• VMware vSphere 4.0 certification (not 4.1)

  Hello

  I took the course in class for vmware vSphere 4 (install, configure, and manage) - ESX 4.0, ESX 4.0i, vCenter server 4.0 in 2010

  Now, I intend to take the certification exam - VCP4

  However the site of vmware mylearn, in the certification process, I could not find information of certification for vSphere 4.0. I can only see vSphere 4.1

  Please can someone help me know if vSphere 4.0 certification is retired?

  I still have to take a classroom course?

  I can't write the vSphere 4.0 exam?

  Thank you.

  Don't worry, there are no different certification for 4.0 or 4.1. It's the same thing.

  of http://mylearn.vmware.com/mgrReg/plan.cfm?plan=12457&ui=www_cert

  The version 4 days this course VMware vSphere: install configure, manage [V4] taken before December 31, 2010 always meets the requirements.

  Jon Hall explained in different missions, for example http://communities.vmware.com/message/1681431

  André

• Crash course or install, configure and manage?

  I just spent the VCA - VTC

  Then the top is the VCP course but I'm torn between one to take, through experience I was using VMware for about 2 years now. I have bunches vCenter configuration and administered a reasonably small environment on the grand scheme of things and put things in common ground... I'll take the VCP 6 dishes, so be it, but for comparison I've been watching the VMware 5.5 Fast track vs. ICM here: VMware vSphere training comparison 5.X

  I wouldn't go as far as say I am an experienced administrator, but I wouldn't say that I am a beginner. Obviously the fast lane contains much more information if it would suite me best, but what is your point of view on the 2 different courses?

  The first courses install configure manage short this week, although GA was only last Thursday! These are run on the laboratories using a beta version of the software, but that won't be for a few weeks.

  Fast Track for vSphere 6 is not yet available, but you should not wait for a long time (in weeks rather than months)

• Suggested knowledge to install, configure, and manage class V4 exam VCP

  Hello

  I'm relatively new to the it field, just graduated from College, and I really want to work to become a VCP.

  I'm looking to take the class install, configure, manage V4 some time next month, and I was wondering what do I need in terms of knowledge required to take full advantage of this course.

  Thank you for your help and your insight,

  Bao - Tran

  vSphere documentation is here: http://www.vmware.com/support/pubs/vs_pages/vsp_pubs_esx40_u1_vc40_u1.html

  Evaluation software is here: https://www.vmware.com/tryvmware/?p=vsphere

  And you can be aware of the wider infrastructure (SAN/NAS/network) the best

  Scott.

  -

• Cannot install 10.3 (configuration manager remains open)

  I tried to install the latest version of Adobe Flash Player of time lots but it still does not work. The message I get is: 'could not be installed because configuration manager is still open. Please close. "(not exactly that, but translated from German to English)
  But I did not use/open Manager and somehow I can not close it? Also, it is not mentioned in the Task Manager or elsewhere. Now, I do not see the flashes on the internet and I am really frustrated that it does not work.

  
  Now my dates:

  WinXP (64 bit)

  Flash Player 10.3 (I uninstalled all old before installing this version)

  I hope someone knows this problem and can help!

  
  (And I'm sorry, my English may not be perfect because I'm no native speaker )

  
  Thank you

  Hi summertime,.

  This thread (http://forums.adobe.com/thread/873696) solves a problem that seems to be pretty similar to what you feel. I hope that helps!

  Thank you

  KALTechWriter

• OLIVIER 7.9.5.2 zone Applications Configuration Manager error

  Hello
  We are installing and configuring OBIA 7.9.5.2 ODI release for Oracle financial analytics...
  
  After seting up to Oracle BI Applications Configuration Manager, we have connected using the default user ID (data_biappstx)...
  Trying to access the "settings of ELT Admininster", we get the following error in a pop up window...
  
  * "Unexpected exception caught: java.sql.SQLDataException, msg = ORA-01882: region time zone not found *"
  * Time zone ORA-01882 region: not found *.
  "* Unexpected exception caught: java.lang.NullPointerException, msg = null."
  
  We use Oracle database 10G (10.2.0.1.0) for schema and jdk 1.6.0_14.. data_biappstx.
  
  Please, help us to solve this problem...
  
  Kind regards
  dmaze
  
  Published by: dmaze on June 11, 2009 23:07

  Your database is running in a different time zone schedule as the machine running configuration manager?

  Googling for error, found a potential solution: (please let us know if this solves your problem)

  Check your Windows registry if DisableAutoDaylightTimeSet exists in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\TimeZoneInformation. If it exists, set the value to 0 or delete it completely from the registry. There is a known issue with JRE and Windows for it.

  (The above should be done on the oracle database machine, and database manager & configuration may need to restart).

• Changes in the ownership of the products of EMP installed/configured

  Hi team,
  
  I use EMP 11.1.2.2 and I deployed websphere Linux applications approx. I have installed/configured products EMP and installed websphere and deployed in websphere by using a local account. Can you please let me know if it cause no problem if change the owner of all files of products EMP and websphere installed/configured LDAP account.
  
  Thanks for your time on this.

  It is usually best to keep the same user who has installed, but it is possible to change the user if it should be done, many windows installs are on domain accounts and it doesn't have to be a local account just as long as it is part of the Administrators group.

  See you soon

  John
  http://John-Goodwin.blogspot.com/