VMware Workstation 12.1.1 Pro is unable to install the network grows on CentOS 6.8 host

Similar Questions

• Of VMware Remote Console Plug-in Setup error: "unable to install the hcmon driver."

  Hi all

  I try to install the VMware Remote Console Plug-in for my browser of 32-bit Internet Explorer 11, and I get an error message during installation: "Unable to install the driver of hcmon."

  I have Windows 7 64 bit with .NET installed 4.5.5. Anything installed in my device manager, there is no hcmon.

  I use an x 86 install files to VRMC (VMware-vmrc-win32 - x 86 .exe), but I guess that this 32-bit version is what I want because I use THE 32-bit? Or is that what I want 64-bit for my OS?

  I've seen some posts related to this issue, but all my registry keys seem to be set correctly and my .NET is of course more recent than the version 3.5 SP1, but I hope it's OK.

  Also, I got an error on the USB in my Windows logs Arbitration Service, but following the steps described here, and retry the installation also failed with the same error 'hcmon' described above:

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2043656

  Any ideas on what might occur, or other things I can try?

  Check if these KBs contributes to:

  http://KB.VMware.com/kb/2053281

  http://KB.VMware.com/kb/2006486

• HP Compaq 6200 Pro small format: Re-install the network adapter

  Dear assistants & members,

  Yesterday, I tried to download a 64-bit system that has not worked and had trouble.

  I am trying to connect to the internet, but it still says: a network adapter was not found (something like that)

  I have seen a lot of messages so I already do my hardware ID:

  PCI\VEN_8086 & DEV_1502 & SUBSYS_1497103C & REV_04

  PCI\VEN_8086 & DEV_1502 & SUBSYS_1497103C

  PCI\VEN_8086 & DEV_1502 & CC_020000

  PCI\VEN_8086 & DEV_1502 & CC_0200

  I hope you self-introduction can help out me.

  I'm computer: HP Compaq 6200 Pro Small Form Factor

  Hello:

  Try the driver directly from Intel.  The hardware ID you posted is for an Intel ethernet card.

  The first file listed is for W7 32 bit.

  https://Downloadcenter.Intel.com/download/18713/network-adapter-driver-for-Windows-7-

  I was going to ask...

  How did you couldn't get W7 x 64 install?

  I have an Elite 8200, which is the same model as yours, except that it's a chipset series 6 Intel a little better than you do.

  I had no problem installing W7 x 64 on it.

• VMware Workstation and Hyper-V are not compatible. Remove the Hyper-V system role before running VMware Workstation

  Ouch. I just started to do some Win Phone 8 and development Win, and all simulators are needed for development.

  This means that a dev to Win8 may only work on their host... I'm sure it would work in a virtual machine.

  Can I make for happy? (Hyper V might have to win here... sigh).

  VMware Workstation and Hyper-V are not compatible. Remove the Hyper-V system role before running VMware Workstation

  Once you install the Hyper-V role on your host, your host is no longer running Windows 8 as the native operating system.  It runs Hyper-V as the native operating system, and Windows 8 runs as OS management within a privileged under Hyper-V VM.  With the Hyper-V role installed, * everything * runs in a virtual machine under Hyper-V.

  So to run a virtual machine under my computer in Windows 8 under Hyper-V, you must be able to run a nested VM.  It's possible with Hyper-V, the hypervisor host, but with the updates in custody, I mentioned above.

• I already bought Adobe Pro XI, unable to find the function to convert pdf to word?

  I already bought Adobe Pro XI, unable to find the function to convert pdf to word?

  File--> save as--> Microsoft Word

  Mylenium

• I had to uninstall flash player, but am unable to install the update.  I have reset the Mac Book but am still unable to install the update.

  Safari: Version 8.0.6 (10600.6.3)

  Mac Book: MacBook Pro (retina, 13 inch, mid-2014)

  I had to uninstall flash player, but am unable to install the update.  I have reset the PRAM book Mac & NVRAM + SMC re-set, but I am still unable to install the update via Safari or FireFox

  Still due once sort myself

  I downloaded the offline install app;

  http://fpdownload.Macromedia.com/pub/flashplayer/latest/help/install_flash_player_osx.dmg

  Up and running

• Get "unable to install the VirtualCenter Agent service" on ESX 2.5.4 after the upgrade of the VC to 2.5 update3

  I have improved my Virtual Center 2.5 to 2.5 update 3. After doing this, I have 2 of my ESX v2.5.4 servers which will not reconnect.

  I get the error message "Unable to install the VirtualCenter Agent service". I also see "the connection failed due to a bad user name or password" showing upwards in the list of tasks of VC. I don't know that I type in the good user/pass as I turn around tight and SSH on the server using the same user/pass.

  I tried to do "service vmware-vpxa restart" on the hosts. What log file I look in upon the host server to find the real problem, and is there any other suggestions on a quick fix to try before the word is supported?

  Thank you.

  Here is a good link that will help you in the installation of officers

  http://VMware-land.com/Vmware_Tips.html#ESX6

• Booklet 70CT: unable to browse the network

  I'm trying to connect my booklet 70CT to an existing LAN. I use a Fast Ethernet Linksys PC card in the booklet, connect a Linksys Wireless-G Broadband Router on a LAN port.

  There are two other computers connected to the router network OK. I did all the installation procedures in the manual of the PC card and everything seemed to be working normally.

  When I double click on network neighborhood on the booklet, I get a screen with "Entire network" in this topic. When I double-click it, I have a sign saying "Unable to browse the network."

  Help, please.
  Frank

  Hello

  I searched on the Microsoft Web site to some proposals of solution and found this:
  Unable to browse the network"when you click Network Neighborhood
  http://support.Microsoft.com/kb/260214

  This problem may occur if there is a key to logon automatically in the registry at the following location:
  EntVersion entVersion\Network\Real Mode Net

  It seems that you can solve this problem by deleting the registry location AutoLogon value listed in the section "Cause".

  Also check this:
  Network error (1222): unable to browse the network
  http://support.Microsoft.com/kb/170336

  Good luck

• Bing bar 7.00 is unable to install the update error 643

  Bing bar 7.00 is unable to install the update error 643

  How to ask a question
  http://support.Microsoft.com/kb/555375 >

  It helps those answering questions if you provide:

  what the version of windows (32-bit or 64-bit) and service pack level.

  you use what browser (exact version).

  what application anti-virus or security suite is installed and your current subscription?

  What third-party firewall

  What software anti-malware can be installed.

  What updates you trying to install? (Number of KB)

  Please do it in your next reply.

  `````````

  DON'T APPLY TO WIN7

  A KB has been created for the x 0 80070643 or error code 0 643 x that appears when you use Microsoft Update or Windows Update Web sites to install updates. The KB includes an automated Microsoft Fix it 50473 that corrects the problem. Look at the following KB: http://support.microsoft.com/kb/958052>>

  Suggest you download and save the fix it.

  Then close all open programs and browsers before running MS fix 50473.msi.

  `~`

  03/18 / 1105:46: 22:00

• Unable to install the update to windows? 0x800A01AE & 0 x 080070570

  Unable to install the update to windows? cordially 0x800A01AE & 0 x 080070570, Sohail Patel "MCSE 2003 | ITILv3 | "A journey of a thousand miles begins with a first step."

  http://support.Microsoft.com/kb/910359

  Manual procedure to solve the "0x800A01AE" or "0 x 080070570" error messages to manually resolve this problem, follow these steps:

  1. Stop the Background Intelligent Transfer Service and the automatic updates service. To do this, follow these steps:
     1. Click Start, click run, type cmd, and then click OK.
     2. At the command prompt, type the following commands and press ENTER after each command:
        net stop wuauserv
        net stop bits
        output
  2. Rename the Catroot2 folder.

     Note Do not follow this step if you are using Microsoft Windows 2000.

     To rename the Catroot2 folder, follow these steps:

     1. Click Start, click run, type cmd, and then click OK.
     2. At the command prompt, type the following commands and press ENTER after each command:
        
        net stop cryptsvc
        Ren %systemroot%\System32\Catroot2 oldcatroot2
        net start cryptsvc
        output

     Important Do not rename the folder C:\windows\system32\catroot. The Catroot2 folder is automatically recreated by Windows, but the C:\windows\system32\catroot folder is not recreated if is renamed the folder C:\windows\system32\catroot.

  3. Rename the folder "C:\Windows\SoftwareDistribution":
     1. Click Start, click run, type %any, and then click OK.
     2. Right-click the C:\Windows\SoftwareDistribution folder, and then click Rename.
     3. Type SoftwareDistribution.old, and then press ENTER to rename this folder.
  4. Save the files used by Windows Update and Microsoft Update. To do this, follow these steps:
     1. Click Start, click run, type cmd, and then click OK.
     2. At the command prompt, type the following commands, press ENTER after each command, and then click OK every time that you receive a verification message:
        regsvr32 c:\windows\system32\wuapi.dll
        regsvr32 wuaueng1.dll
        regsvr32 c:\windows\system32\wuaueng.dll
        regsvr32 c:\windows\system32\dllcache\wucltui.dll
        regsvr32 wups2.dll
        regsvr32 c:\windows\system32\wups.dll
        regsvr32 wuweb.dll
  5. Start the service of automatic updates, Background Intelligent Transfer and the event log service. To do this, follow these steps:
     1. Click Start, click run, type cmd, and then click OK.
     2. At the command prompt, type the following commands and press ENTER after each command:
        net start bits
        net start wuauserv
        net start Eventlog
        output

        Solved...!

  Best regards, Sohail Patel "MCSE 2003 | ITILv3 | "A journey of a thousand miles begins with a first step."

• have the new Canon pro-1000. Just installed the inks. He tells me that I'm not on a flat surface and c

  I have the new Canon pro-1000. Just installed the inks. He tells me that I'm not on a surface level code1340 error '. Impossible to go to the next step,

  No post?

  Ian

• Problem with searching for computer on the network. Error: "unable to browse the network. The network is not present or not started. »

  Hello

  I have two NICs connected to my computer for creating hotspot Wifi network. I created successively network Wi - Fi hotspot. But after that when I tried to connect to my local network computers
  My network places-> network-> network Microsoft Windows. I get this error "unable to browse the network. The network is not present or not started. »
  Thank you.

  I am able to fix this by myself.

  The solution that worked for me:
  Run as administrator command prompt.
  Insert the Windows XP Sp3 CD in disc drive (I have xp sp3 installed)
  
  At the command prompt, type in
  
  
  SFC/SCANNOW
  
  
  
  

• My 3rd Windows 7 computer is unable to access the computers on the network. "Unable to browse the network", or "the network is not present or not started.

  3 computers, 2 XP, 3 windows 7.  The network is wired and wireless Ethernet.  Wired windows 7 computer can see xp wireless desktop.  no computer can see 3rd xp professional running on the wired computer.  Third computer can acess internet through router wireless, but when accessing NETWORK/MICROSOFT WINDOWS NETWORK PLACES/SET, a message comes back with "Unable to browse the network", "the network is not present or not started.  I can ping other computers.  I ran home and small office set up several times.  The network is protected by Norton Inernet Security.  He can see all computers in the group in its Panel of network security plan.  This system worked to a point.
  I'd appreciate any help you can provide.

  original title: unable to browse the network.

  All computers must be on a working group to see and access on the same network otherswise, you won't have access to each other.

  Pls check your computers under workinggroup (domain name)

  Check if your firewall is not blocking.

• Virus & spyware definitions update failed. error code: 0x8024402c. Error description: Microsoft Security Essentials was unable to install the updates of definition, because the proxy server or target server names is not resolved.

  Virus & spyware definitions update failed.

  error code: 0x8024402c.

  Error description: Microsoft Security Essentials was unable to install the updates of definition, because the proxy server or target server names is not resolved.

  Here is an article that meets your specific error message regarding updates:http://support.microsoft.com/kb/900936.  I am surprised that the error occurs with all the updates, but there may be a difference between them that causes the problem for definitions, but not for others.  I hope that this will solve the problem.

  If this does not help, please transfer your question in Forum Windows Update:http://social.answers.microsoft.com/Forums/en-US/vistawu/threads where updates experts will be happy to help you.  Please post with the information requested here:what to post in the Windows Update forum

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I'm unable to install the updates on my system

  I'm unable to install the updates on my system. Arte updates installed, but they are not configured properly so changes are returned and the end system day are not up to date please help. Thank you

  Hello

  see if that helps to fix:

  How to reset the Windows Update components?

  There is also an automatic 'fix - it' here

  http://support.Microsoft.com/kb/971058

  Also, try to put the KB numbers in the search on the link below and then manually download the

  http://www.Microsoft.com/downloads/en/default.aspx

   

  or please repost your question in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all