Similar Questions

• After the crash of the system, Workstation 10 reports "not enough physical memory is available" - how to fix?

  On a Windows Pro 8.1 with 32 GB memory main system, I was running three virtual machines on 10 workstation.  Then we had a power failure and the system crashed.  Once the power was back and I restarted, any attempt to run a virtual machine failed with the following (change numbers) message:

  Not enough physical memory is available to power on this virtual machine with its configured settings.

  To solve this problem, decrease the size of this virtual machine to 988 MB memory, increase the amount of physical memory for all the virtual machines to 1219 MB or adjust the parameters of extra memory to enable more virtual memory machine to swap.

  This occurs if the virtual computer, I try to start is one of those that was going or who was not working at the time of the accident.  In this case if I am as an administrator or not.

  I checked Edit/Preferences/memory, and reserved memory is set to 24480 MB - 24 GB.  Can I run a virtual machine if I set the memory size to below the value indicated in the message (in this case, 988 MB).  Of course, I don't want to run like that!

  The Windows System Control Panel reports (almost) complete 32 GB system memory. Task Manager indicates that only 7% of close to 32 GB is in use.  "About VMware Workstation", reports 32640 MB.

  How can I fix it?  I'm basically dead in the water.

  Bob

  You may encounter the same problem that others have reported in this other thread: Windows 8.1 October rollup KB2995388 and problem with 10 Workstation

  Try the workaround it and see if it helps.

  --

  Darius

• not enough physical memory is available.

  When you try to power on any virtual machine, the warning for "not enough physical memory is available to power on this virtual machine... »

  The Office has 2 GB of ram, of which 1530 is attributed to the workstation.

  I rebooted, tried to run workstation mode administrator, without result.

  We have encountered this same problem in the House and focus on it.

• VMware workstation 10 not enough physical memory is available

  Hello

  I'm trying 10 workstation. I have a system with 16 GB of ram. My virtual machine has a reserved 12 GB ram. In wokrstaion 9 being works very well. 10, I get the message

  not enough physical memory is available, try to assign it 11960 Go.

  Why am I suddenly this message?

  
  

  I did a clean install of workstation 9. In the preferences of the reserved ram is 13790. So I get the error. When you set V10 for this value I get warnoing is too, but I can start

• VMware Workstation 10 - not enough physical memory...

  So, I'm aware of the Windows KB2995388 8.1 update that causes this problem:

  Not enough physical memory is available to power on this virtual machine with its configured settings. To solve this problem, decrease the size of the memory of this virtual machine at 460 MB, increase the amount of physical memory for all the virtual machines to 3296 MB or adjust the parameters of extra memory to enable more virtual memory machine to swap. It is possible that native and/or services applications have locked memory which could help launch the virtual machine. Close unnecessary applications or services can free up enough memory to start this virtual machine. If you were able to on this Windows virtual machine on that host computer in the past, try restarting the host computer. Reboot may allow you to use a little more memory host to run virtual machines.

  but after upgrading my OS today I have the same symptoms and can't find installed KB2995388.

  I tried running VMware Workstation as an administrator with no luck either.

  Y at - it no alternative workaround, or is there an another Windows update that can cause this problem?

  Thanks for any help and advice.

  Yes, other updates can cause the same issue, because the change that was made in KB2995388 was incorporated in to many other more recent updates as well.

  What version of Workstation do you run?  If you run Workstation 10.0.4 or newer on Windows 8.1, this should no longer be a problem.

  --

  Darius

• 12 GB of RAM is "not enough physical memory" for a 2-GB virtual Machine?

  I run VMware Player 6.0.3 on Windows 64-bit 8.1. My host has 12 GB of physical memory and my virtual machine uses 2 GB memory. And yet, I can't start my VM because VMware has said "not enough physical memory is available to power on this virtual machine with its configured settings".

  According to the Windows Task Manager, only 15% of my physical memory is reserved for the current enforcement process. So, how is it possible that I don't have enough RAM to run my virtual machine?

  This is a known issue!  Take a look at: (workaround in) Re: 8.1 Windows October rollup KB2995388 and problem with 10 Workstation

  Also take a look at: Windows 8.1 October rollup KB2995388 and problem with 10 Workstation & Microsoft Patchday's and ' not enough physical memory is available to power on this virtual machine " & 14 October patches for WIndows 64 bit 8.1 breaks VMWare player 6.03

• Error Msg: "not enough server memory is available to process this command" tries to open the network when the folder shared

  Hello.  I did some of my files of Windows XP Dell system accessible on my home wireless network.  When I try to open the folder (which appears in the network folder) on my Sony Vaio with Windows Vista, I get the error msg that I have stated above in the title of this Post.

  The entire message starts like:

  \\DOUG-DELL1\Denises at the bottom of the folder is not accessible. You could

  are not allowed to use this network resource.  Contact the

  Administrator of this server to find out if you have the permission to access

  "not enough server storage is available to process this command" tries to open the network when the folder shared.

  I have a bitmap and a Jpeg screenshot captures showing the specific error message as well as the objects on my network - is possible I can join to this post?

  This error message is misleading. See article Knowledge Base Microsoft Antivirus software may Cause Event ID 2011 for a likely solution, specifying a value of IRPStackSize 15 on the Windows XP computer. Boulder computer Maven
  Most Microsoft Valuable Professional

• Error message: "not enough server memory is available to process this command" tries to open the network when the folder shared

  When an XP machine is peer-to-peer by ethernet to a 7 W machine, sometimes the XP machine cannot access the files W 7 and the Xp machine displays the message "not enough memory server is available... "the W7 machine retart solves the problem, but the problem recurrs each week.

  Hi Richard hartwell,.

  Could you tell what antivirus software you have installed on your Windows XP machine?

  The problem occurs because of a software antivirus installed on your Windows XP computer.

  See article Knowledge Base MicrosoftAntivirus software may Cause Event ID 2011 for a likely solution, specifying a value of IRPStackSize 15 on the Windows XP computer.

  As a test, you can consider disabling the security software on your Windows 7 machine as well.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Allow all security software after the trial.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Not enough (RAM) memory free to start treatment for Outlook services

  When I run Outlook 2007 SP2 and after getting my new one e-mail a notice appears of the outlook on the outlook bar icon to say tasks cannot start treatment services because there is not enough free memory to run this program (and it I do not see my new email). I added 2 GB of RAM and now have 6 GB in my Dell XPS 420 desktop computer. It has no effect on the error message. I'm running the 32-bit version of Windows Vista Ultimate SP2. In the physical memory in task manager, I show about 3100 MB in total, 1500 cache and 0 free. Don't know why the total would not be about 6 GB which is what is installed. What can I do to manage the memory or any other suggestions for the prospects for a return to normal?

  It turns out that the problem was with Outlook and not related to the memery computer. It was solved by going to features, programs and Control Panel, and then repair Microsoft office system 2007.  Thank you for all your help.

  Hello

  32-bit Edition of Windows Vista has a limit of 4 GB memory. If you have installed more than 4 GB, Vista will not read the extra memory.

  The question you have posted is related to Outlook and would be better suited to the office community. Please visit the link below to find a community that will support what ask you

  http://answers.Microsoft.com/en-us/Office/Forum/Outlook

• Not enough free memory

  Hi, I have the same problem, unfortunately, your solution does not work, when I paste the code at the command prompt, an error has occurred, and of course I started the administrator command prompt...

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/there-is-not-enough-free-memory-to-run-this/815fcc17-B5A5-4468-98c7-94d1ba3e5b3c?page=1 RelanAlex said they have tried the solutions and are still having problems. >

  Hi all, thanks for the reply I appreciate (I write a long solution is a pain more describe a problem), but I take the option reinstall my windows so I don't mind more, and now everything is back to normal, again, of course I lost most of my work, the software and the etc T_T I have ever had the chance to backup. I learned my mistake and I never mess with registry thing again.

  Once again thanks for the help and good day.

• Error: "VMware Workstation has suspended this virtual machine because the disk on which the virtual machine is stored is almost full."

  I get this error message:

  VMware Workstation has suspended this virtual machine because the disk on which the virtual machine is stored is almost full. To continue, free 1.3 GB of additional disk space.

  I read up on the subject and found that I have to re size a partition. Anyone know what it could be? I can't find anything that looks like it has something to do with VMware. Does anyone know what size and what file system is it?

  My OS:
  Tumbleweed OpenSUSE x 64

  Thanks in advance

  On more creative, my home and root file systems were not extended to my full disk space :^)

• With the help of VM Workstation 8. error when restoring from instant snapshots are not allowed on this virtual machine.

  Hello

  I have takena instant and then try to turn on the machine and get a message:
  "Snapshots are not allowed on this virtual machine!

  When I try to start the snapshot form, I get an error:
  "snapshot restore error, snapshots are not allowed on this virtual machine.

  Can you please help?

  It seems that the configuration (.vmx) file has been deleted (zero byte). I recreated a new you have attached log files. Please replace the file corrupted with VMware Workstation (or at least tab of the virtual machine) closed in order to ensure that the replaced file gets read.

  André

• VMware Workstation is unable to open one of the virtual disks required by this virtual machine because it is larger than the maximum file size supported by the host file system.

  I'm transitioning from Windows XP (64-bit) on a new computer with Windows 7 installed.  I undertook to VMWare Workstation 6 7.0.1 in the process.  The problem is with a very large RAID 5 volume on the new system.  It's a score of 5.45 TB (TPG and NTFS).

  When I try to start a virtual machine on this volume, I get the message "VMware Workstation cannot open one of the virtual disks required by this virtual machine because it is larger than the maximum size of the files supported by the host file system.".  This is obviously not true.  If I copy the virtual machine to another drive on the system, it starts without a problem.

  Anyone have any ideas on how to work around this problem?

  try to add this line in the vmx file:

  diskLib.sparseMaxFileSizeCheck = "false".

  Maybe it helps.

  VMDK-type do you use?

  monolithicSparse? -C' is the only part type more?

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• Windows Server 2008 32 bit - "not enough server storage is available to process this command."

  My operating system is Windows Server 2008 32-bit. When I install SQL Server 2008, system throws me error.

  "Not enough server storage is available to process this command."

  Free space in my drive C is 195 GB.

  Even I checked upward with IRStackSize, and is to have a value of 50. I still get the same error.

  Kindly guide me to solve this issue.

  Concerning
  Hitesh Parsawala

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Desktop\SharedDocs is not accessible. You are not allowed to use this network resource. Not enough server storage is available to process this command.

  \\XXXDesktop\SharedDocs is not accessible. You are not allowed to use this network resource. Contact the administrator of this server to find out if you have the permission to access. Not enough server storage is available to process this command.
  I got the above message when I tried to access my room servert pc (XP Pro with Service Pack 3) from another pc Client (XP Home Edition with service pack 3) on a network share. I see all class document & readers who share in my network places on both PCs.
  There is no problem when I have access to XP Home Edition of XP Pro. I heard the pc installed with Acronis True Image to give to this question. But my two PCs are installed with it. Any solution.
  What I've tried so far on my pc (XP Pro):
  1. click on start, run, type regedit, and then click OK.
  2. Locate and double-click the following registry subkey:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Lsa
  3. on the right side, double-click restrictanonymous setting.
  4. make sure that that the value in the value data box is set to 0, and then click OK_ (why the default value is 0. I change it to 1, but always the same)
  5. close the registry editor.
  6. restart the computer.
  I also tried to enable the allow anonymous enumeration of SAM accounts and shares on XP Pro (default value is Disable).
  File and printer sharing exception is enabled in firewall. Don't have a firewall part 3

  The two guest account are capable of Simple file sharing in XP Pro box checked also checked.

  Hello

  Please visit the following link.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/three-computers-networked-fine-then-suddenly-the/3976b554-bb9c-4920-881f-38eb64480ca7