VMware Workstation 7 display problem

Similar Questions

• Network bridge in VMware Workstation 11 connection problems

  I have bridged network connection problems in VMware Workstation 11. So far I have tried:

  
  

  Re: Windows Pro/Ent 8.1 Overview invited - stop Windows Net Performance, away from work

  
  

  Re: Flow very slow network-> Guest host, but no comments <-home

  
  

  So far, none of the solutions worked. I turned off "Large Send Offload" on each adapter that I could find on the host and the guest. Nothing. Restore these settings in any combination with other out does not work either. I edited the .vmx file and replace by vmxnet3 occurrences, and that no longer works. So far nothing I've tried has worked. I disabled all firewall and antivirus. Still nothing. When I run Guest OS Windows Network Diagnostics, I get the "your modem broadband has connectivity problems." However, I know that this is not the case. I also used the "Virtual Network Editor" to force the bridge connection to select the correct network card (in my case, it's the Intel Centrino Wireless - N 1030 wireless card), but still no luck. Any help would be much appreciated.

  
  

  Thank you

  Dave
  

  
  

  My Stats:

  
  Host:

  OS: Windows 7 x 64

  Processor: Intel Core i7

  Installed memory (RAM): 16.0 GB (15.9 GB usable)

  Wireless adapter: Intel Centrino Wireless - N 1030

  Router: Netgear AC1200 Smart Wifi router. Model: R6200v2 (default settings)

  
  

  Comments:

  OS: Windows 7 x 64

  
  

  So I finally the solution look. BitDefender firewall was blocking all traffic on the connection Bridged in VMware Workstation. I have disabled the firewall completely Bitdefender and Bridged Networking worked perfectly. I'll probably create another topic more precisely around Bitdefender firewall configuration to allow traffic network through Bridged from VMware.

• NAT with VMWare Workstation 9-Urgent problems

  
  Hello

  Try to use NAT in VMware Workstation 9 and am lost in my VM connection.

  But when I use the network bridge, it works very well.

  Is someone can you please help me solve?

  I tried reinstalling VMware workstation for all n No.. times and restored the settings of the Virtual Network Editor as well.

  Help, please!

  It seems that the client does not receive a DHCP address? Assuming that the virtual network adapter in the virtual machine settings is 'connected' (which, I guess, because you said Bridged works very well), you can check if there is a problem with the installation. Please run services. MSC (or net start from the command line) to see what VMware services are running on the host computer.

  André

• VMware Workstation 7 video problem with Ubuntu Lucid

  Running VMware WS 7.0.0 (trail) on Ubuntu 9.10 x 64 install Ubuntu Lucid beta.  Autoisntall works well (Ubuntu 10.4 detected), but there is absolutely no video output when installing.  Uplon restart I get the follow-up "Ubuntu runs in low graphics Mode.  Screen graphics, peripheral of entry card may not be detected correctly.  You willneed to set these yourself. "Press OK produced a menu the first choice is to use low graphics for a single session.  Thre are 3 other options, but none of them are useful because when I run Ubuntu Lucid suplpossedly Low Graphics mode the display is indeed perfectly good.   Is anyway to perpetuate one time "low gralphics mode '?  Y at - it something I can change in the following configuration:

  <!--

  @page

  PRE.western {do-family: "Times New Roman"}

  P {margin-bottom: 0.08 in.}

  ->

  {color:#000000}<font face="Sans Serif">{size:3}&lt;Foundry&gt;{size}</font>{color}
  
  {color:#000000}<font face="Sans Serif">{size:3}&lt;?xml
  version="1.0"?&gt;{size}</font>{color}
  
  {color:#000000}<font face="Sans Serif">{size:3}&lt;VM&gt;{size}</font>{color}
  
  
  {color:#000000}<font face="Sans Serif">{size:3}&lt;VMId
  type="string"&gt;52 c7 df 06 64 e3 1f 90-44 46 72 05 fa ad
  4b c8&lt;/VMId&gt;{size}</font>{color}
  
  
  {color:#000000}<font face="Sans Serif">{size:3}&lt;ClientMetaData&gt;{size}</font>{color}
  
  
  {color:#000000}<font face="Sans Serif">{size:3}&lt;clientMetaDataAttributes/&gt;{size}</font>{color}
  
  
  {color:#000000}<font face="Sans Serif">{size:3}&lt;HistoryEventList/&gt;&lt;/ClientMetaData&gt;{size}</font>{color}
  
  
  {color:#000000}<font face="Sans Serif">{size:3}&lt;vmxPathName
  type="string"&gt;Ubuntu
  Lucid.vmx&lt;/vmxPathName&gt;&lt;/VM&gt;&lt;tools-manifest&gt;&lt;svga33
  version="10.3.0.0" installed="FALSE"/&gt;&lt;svga4
  version="10.4.0.0" installed="FALSE"/&gt;&lt;vmmouse42
  version="1.0.0.0" installed="FALSE"/&gt;&lt;svga42
  version="10.10.2.0" installed="FALSE"/&gt;&lt;vmmouse43
  version="12.6.4.0" installed="FALSE"/&gt;&lt;svga43
  version="10.16.7.0" installed="FALSE"/&gt;&lt;vmmouse43_64
  version="12.6.4.0" installed="FALSE"/&gt;&lt;svga43_64
  version="10.16.7.0" installed="FALSE"/&gt;&lt;vmmouse67
  version="12.6.4.0" installed="FALSE"/&gt;&lt;svga67
  version="10.16.7.0" installed="FALSE"/&gt;&lt;vmmouse67_64
  version="12.6.4.0" ins{size}</font>{color}
  
  

  ? Marty Bruno Ferreira

  Latest updates to lucid Lynx has addressed the problem between xorg and vmware video driver.  Just re - rerun Setup vmware tools and restart the computer.

• ESXi on VMWare Workstation with widows 2008 comments

  Hello

  I am about to begin a new deployment and I tested some things before that I have shell out money for new equipment and software.

  I tested Windows Server 2008 R2 64-bit on VMWare Workstation and everything is good.  My VMWare Workstation is on Win 7 64 bit

  Ultimately, this equipment will run on ESX, vSphere Essentials through.   To test this, I installed ESXi 4 Update 1 inside VMWare Workstation.

  Because the vSphere client is not supported on Windows 7, I installed the Client vSphere on Win XP 32 bit inside another guest of VMWare Workstation.

  During the installation of Windows 2008 R2 64-bit on ESXi, via vSphere on XP, I get the following error

  Trying to load a 64-bit application, however this CPU in is not compatible with the 64-bit mode.

  Well, I know that my cpu is 64-bit capable, because I'm already under 64-bit so much already.

  It worries me a bit, because I wasn't expecting this obstacle - my test was to validate a number of other things, not this and now I think I might switch to Hyper-V.

  I already searched the forums, and from what I found, nothing has solved the problem yet

  However, there could be a saving grace - could the fact that I'm under esxi in vmware workstation cause this problem?

  Paul

  You're out of luck.

  You cannot run 64-bit inside a virtual ESX clients.

  Nested VMs have no VT support, you need to run a 64-bit client

  ___________________________________

  VMX-settings- Workstation FAQ -[MOA-liveCD | http://sanbarrow.com/moa241.html]- VM-infirmary

• I have a problem starting up a Windows XP Pro Machine virtual Windows 8 host system (which has VMware Workstation 10.1).

  I am new to the virtual machines.  For several months I've been running a Windows XP Virtual Machine in an old machine of Windows 7 with VMware Workstation 7.0.  The hard drive is having some problems at times, so I thought that I could move the virtual machine on a new computer that has an OS 8.1 Windows and VMware Workstation 10.  For example, on the Windows 7 machine, I copied the directory with all the * .vm files and pasted into the machine to Windows 8. But when I tried to start VMware Workstation 10 in Windows 8 machine, I got the message "this virtual machine policies are too old to be run by this version of VMware."  I went to the knowledge base and used the solution described here: I've deleted the lines of three 'policy' of the .vmx file and added the suffix .ancien to the .vmpl file, which actually disabled.  Now, when I try to start the virtual machine, the black screen appears with the VMware logo in the Center and everything seems fine, but Windows XP starts.  And logo VMware guard churning away as in a continuous loop.  It is not easy to stop.  The only way to stop VMware is via the Task Manager or restart the machine.

  What must I do to get the Windows XP Pro VM to run in the new machine?

  VMWare technical support suggested that I have disable 3D acceleration (VM > settings > view and uncheck the box 3D graphics acceleration).  The virtual machine starts now with some minor problems, but it is usable.  But by closing accel 3D turns, in the words of the Technical Support Engineer, David, that there is "a problem with the graphics card not imitate or through its capacity to the virtual machine.  In other words do not support to the VM guest 3D acceleration. "My next step is to make sure that I have the updated driver for the Intel HD Graphics 4600 display adapter.

  Minor problems are:

  (1) the virtual machine works best in screen mode reduced.  There are a few problems speed mode full-screen.

  (2) the VM will still work after switching on of the host.  But after execution of the virtual machine, if power you the virtual machine and the release of VMware workstation, then later, start the workstation, the virtual machine will power not.

  To turn it on again you must out of VMware Workstation, disconnect the host machine and then reopen it in one.

• Display with VMware Workstation 9 and Enterprise of Windows 8 comments bug

  Hello

  I just installed VMware Workstation 9.

  I created and installed a VM of Windows 8 Enterprise comments.

  Everything works fine, except that when I go to the Windows 8 settings via bar charm (not via the desktop...), the display setting menu is occasionally screwed up!

  This problem appeared just after I installed the VMware Tools in the guest OS. Before that, there was no display problem. Believe me, I've taken care of that by testing entirely.

  My OS is Windows 7 Ultimate. My processor is an Intel Core i7 870 (4 cores) and I have 8 GB of memory. My graphics card is an AMD ATI 5850 with the latest drivers.

  Any help would be greatly appreciated!

  PS: This is not one type of bug in time. I can repeat this every time I have to create a virtual machine Windows 8 Enterprise comments. The problem was also there with VMware Workstation 8. My guess is that VMware tools are buggy, at least with certain type of graphics compared to Windows 8...

  Hodgepodge

  Looks like you see the same problem that has been reported in this thread: http://communities.vmware.com/message/2124359

• VMWare Workstation v.6.5.2 suppresses the display of controls in Microsoft Expression Blend

  I tried to install Expression Blend on different OS in VMWare Workstation 6.5.2 v. and got the same result.

  Any dialog box displays only the default button that has the focus.  The rest of the controls on a dialog box are invisible; Although they respond to the keyboard (Alt + key short) assuming that we can guess the short key of the invisible control.   After completing the installation of mixture by using the shortcut key controls of the dialogs in the installed software appears unless the mouse is hovered over them.

  I had this problem with VMWare Workstation 6.5.2 Vista Ultimate, Windows XP Pro or Win 7RC running.  All of them display the same result for both Expression Blend v. 2 and 3.

  No idea why?  Is there a display setting in VMWare that could cause orders are invisible until this that over?

  I had the same problem, I solved it by uncheck "Accelerate 3D graphics (DirectX 9.0c)" and then properly installed Expression and display correctly.

  See you soon!

• Problem installing Windows on VMWare Workstation 11 10

  Good evening

  I'm a french user on VMWare.

  I have a problem when I try to install Windows on VMWare Workstation 11 10, I'm stuck here:

  

  I tried several times to reinstall.

  I use this iso standard: Windows10_TechnicalPreview_x64_FR - FR_9926.iso

  Can you help me?

  See you soon.

  Set up 2 x 2 cores CPU and memory: 3 GB

• VMware Workstation 11 - connection to vCloud don't Air any displayed VMs?

  Connection to vCloud Air no VMs not posted?

  No Data Center displays, impossible to download?

  Any ideas?

  It was not fixed, I was told it was a bug and would be fixed with the general release

  vCloud Air.

  Support for VMware (VMware Workstation Support, India) me, notifies when this issue has been resolved! (when that date comes, I'll be updating here!)

• USB foot pedal problem (Infinity IN-USB-2): recognized by Windows but does not work on VMware Workstation 10

  When I connect an Infinity IN-USB-2 pedal for my guest Windows 7 Professional (on Ubuntu 14.04 and VMware Workstation 10.0.2), the pedal gets recognized by Windows and different applications, but by pressing the pedal itself has no effect.

  I downloaded a USB foot pedal Tester (http://vec-infinity-in-usb-1-foot-pedal-tester.soft112.com/) on the client and he acknowledged that the device is connected, but when I pressed on any of the three pedals, the tester has not detected the presses.

  I tried the pedal on a real Windows computer, and it worked fine.

  When I connect the pedals, even with the guest in the foreground, VMware Workstation will appear a dialog box:

  The specified device is claimed by another (usbhid) driver on the host operating system. The device can be used. To continue, the appliance will be first disconnected from its current driver. [Cancel] [OK]

  When I click 'OK', we state above: Windows recognizes that the device is connected, but foot-presses are not detected. My other USB devices are not pop this dialog box. (Click Cancel maintains the device disconnected from the guest.) I don't know if the dialog box is significant or a red herring.

  Here's what/var/log/syslog says when I connect the pedal with the Windows client in the foreground:

  kernel: [281434.822751] usb 2 - 1.7: new low speed USB device number 28 using ehci-pci

  kernel: [281434.920667] usb 2 - 1.7: new USB key found, idVendor is 05f3, idProduct = 00ff

  kernel: [281434.920672] usb 2 - 1.7: new USB device strings: Mfr = 1, product = 2, SerialNumber = 0

  kernel: [281434.920675] usb 2 - 1.7: product: pedal WITH USB

  kernel: [281434.920678] usb 2 - 1.7: manufacturer: VEC

  kernel: [281434.923852] entry: CVE CVE USB pedals as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7/2-1.7:1.0/input/input38

  kernel: [281434.924239] is hid-generic 0003:05F3:00FF.0016: entry, hiddev0, hidraw3: USB HID device v1.00 [CVE CVE USB pedals] on usb-0000:00:1d.0-1.7/input0

  PSG-probe: check the bus 2, device 28: ' / sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.7 '.

  PSG-probe: bus: 2, device: 28 is not a MTP device

  And when I click on "OK" to the dialog, he said:

  kernel: [281480.324926] usb 2 - 1.7: reset low speed USB device number 28 using ehci-pci

  kernel: [281480.900448] usb 2 - 1.7: reset low speed USB device number 28 using ehci-pci

  When I unplug the device, it is said:

  kernel: [281517.582472] usb 2 - 1.7: unplug USB, the device number 28

  Thanks for the ideas on solving this problem.

  Answering my own question: I spoke with a salesman who told this pedal does not work on virtual machines for the following reason:

  These pedals are all just Universal USB controllers that require programs or applications to be able to see and recognize them for use. Because they are installed by the base of Windows and Generic USB devices drivers, they can not be seen my remote computers via USB sharing etc.

  They recommended using a hotkey program to work around the problem. I have not tried this solution, but bought a different pedal that works out of the box with VM: a vP-1 vPedal. Lower build quality than infinity (in my opinion) but it works perfectly.

  This is the idea of the key of the seller:

  I have a solution that will allow you to use the pedal as expected if the remote program who need to use supports the use of shortcut keys. For example, these pedals are commonly used with NCH Software Express Scribe professional software. This software can use either a pedal, or you can assign the playback functions to access keys. In the scenario you are talking you re Express Scribe on the remote computer to use keyboard shortcuts, you then install Pedalware (http://www.altoedge.com/pedalware/index.html), a free Windows only the foot pedal utility made by NCH Software, you then use the Pedalware utility to assign the buttons on the pedal of a keyboard shortcut that coincides with those remote program.

• Problems of synchronization of time in VMWare Workstation 10

  Hello

  I have VMWare Workstation 10 and I have problems with the system clock. I have Windows 7 installed (not allowed).

  The system clock is not synchronized with the clock of the host computer. I turned on time-synch, update the virtual machine but I still have this problem.

  What should I do to fix this?

  Thank you

  Hi, Overexposed731

  If you machine has been added in the field, then maybe you can't find the internet time. in such a situation, perhaps, you need to start service 'windows time' to support the synchronization of time with your domain name.

  If not in the field, you should find the internet configuration of time by following the steps.

  1. click on the time in the bottom right of your desktop

  2. click on "change data and Setup... times." "in the dialog box, then you will find 'internet Time' tab in the pop-up window

  Hopefully useful.

  Concerning

  Xisheng

• Problem with VMWare Workstation combo, .vhd virtual drives and physical disks in the sector of size 4K?

  All,

  I suspect something wrong with some of my virtual machines.  I have been using these virtual machines for a while, and I see some weird behaviour recently.

  I see a lot of corruption in the virtual hard disk (.vhd based).  CHKDSK automatically gets performed many large files such as Oracle datafiles get damaged etc...  It all seems quite random and inconsistent, but I am using .vhd virtual machines in VMWare Workstation for years without problem.  This problem is new, and hard drives are basically unstable.

  I * think * (and I'm totally off base) that is perhaps the issue with my new external hard drives.  These discs have a 4 KB sector size, without e512.  Thanks to this architecture of hard drive, don't mount not the tools of Microsoft or manupulate .vhd files on these disks.  The questions seem to go away if I switch to vmdk or switch to the physical hard disk size-one-sector 512kb.  Because errors are not compliant, that I don't really have a way to document/prove that is the case, but it seems to be.

  I use version 9.0.0 on Windows 7 Workstation, and the guest is Windows Server 2008R2.

  My question is:

  (1) what meaning?

  (2) how I prove/document, since it is a contradiction?

  (3) is this a known problem?

  (Btw, switching HDD's vmdk is not an option in our case due to an obscure legal agreement with Microsoft.  I have to distribute my VMs in vhd format, even if they are designed to run on VMWare...)

  -> Adam

  These discs have a 4 KB sector size, without e512.

  (I've highlighted "without e512" in "BOLD" to key in my answer to the host operating system.)

  -L'OS is Windows 7 Enterprise

  According to the political support for the 4 K sector hard drives in Windows, Windows 7 does not support the native 4 K (logical 4 k sector size) but it does not support Advanced Format or 512th (size of logical sector physical and 512 bytes of 4 K) and that is can be the question.

• Problem installing VMWare Workstation on a Server Windows 2012

  Hello

  I have problems when trying to install VMWare Workstation on a Server Windows 2012. Windows Server is Amazon EC2 environment and a generic image extended release.

  The problem is that the installtion process fails because of "Hyper-V" during installation, but after investigating the option "Remove roles and features" I can see that it is not installed.

  Is there any fixes for this issue?

  I enclose three screenshots for you pleasure.

  Regards, Ray...

  Hello Ray,

  Welcome to the VMware community forums.

  You run an EC2 instance that has just 615 MB memory installed?

  It's kind of a weird for a host, much too low for Amazon memory configuration, even be profitable.

  I think that your server is running UNDER Hyper-V, for example. It is probably a Virtual Machine.

  You can easily check that yourself by running the script from this site:

  How Hyper-V to: detect if you are inside a virtual machine

  If it's a Hyper-V virtual computer then I don't think you can install VMware Workstation on the virtual machine and run the nested clients.

  You could do the opposite (invited running hyper-V in a workstation virtualized on vSphere) but is not very fast.

  As you have no control over which platform virtualization Amazon use for their windows servers, I'm afraid you will have to go for a dedicated server instead of a virtual machine.

  Hope this helps,

  --

  Wil

• Problema al add UN nodo adicional al Cluster Windows Server 2012 con VMware Workstation 9 en

  Hola Buenas,

  Ante todo decir este are a Québec fallo he revisado y las responses in different los don't post han well para help me, good os.

  El caso are that I have 2 servers DELL PowerEdge R420 fisicos identicos, cada uno con ellos 3 VMs sober instaladas VMware Workstation 9. The first virtual machine are an image of Kerio control, a second virtual machine to Windows Server 2012 con dominio Controladora, is the third VM con WS2012're donde quiero crear el cluster con dominio usuario. ESTOS servidores knew vez esta una cabina data via iSCSI connected.

  Add tambien when performed the tests of validation led Cluster, todo lo tengo OK. El caso are so creo el cluster con el Nodo 1 y 2 Nodo (sugar Québec cada uno fisica Máquina distinta ellos y bajo mismo Dominio) me error UN da has the el crear hora cluster. In cambio, if creo el Cluster con este nodos if any to crea, pero el fallo viene a hora of connect UN nodo adicional (ya sea o 1 Nodo Nodo 2). Este fallo viene cuando el nodo TR checks are completely funcional in el Cluster, is is "pensando" y da fallo por tiempo sold.

  He revisado problemas similar y he visto that el antivirus can be una causa e caso no lo're are only aun no he wont any AV... There comprobado red devices (utilizamos 4, 2 iSCSI, 1 red LAN y otra heart rate), he desactivado los red el protocolo IPv6 devices, he probado connect los nodos con el Kerio Offline, el desactivado firewall of Windows, exportar components del registro TCPIP6, capture las conexiones iSCSI...

  El cluster is as en Máquinas Office instalacion del WS2012 y is ha hecho manera person, no mediante VMWare del injerto.

  Una nueva prueba as hoy he ha hecho sido realize el cluster 2 maquinas office in una misma Máquina física y to ha s con exito, pero cuando intento realize el 2 nodos cluster (2 machines virtual cada una fisica diferente Máquinas) cuando me da el error. Esto deduzco raiz Quebec are a VMware o red, no lo o problema se, he probado use tan solo 1 switch (infrastructure utilizaria 2), changing IPs, pero igual sigo as can be? contacts? Alguna especifica VMware config?

  El caso're llevo several days ago that don't con este problema y no se a what can deber, agradeceria muchisimo the the comunidad ayuda.

  MUCHAS Gracias

  Buenas

  Between 2 workstation are posible realize ese tipo configs of forma limpia.

  El problema're (sniffer lo of UN pones veras TR), Los nodos assume ip-spoofing y arp spoofing cuando salen por tarjeta of Red led host.

  Para hacer eso as pides, deberias workstation pasar an esxi.

  Saludos