VN7-572-500R: HARD disk insertion, do not upgrade

Hello

I recently bought a VN7-572-500R (Core i5, 6th generation). IT only has an SSD, the place for the HARD drive is free.

So I want to use this free place and insert a disk of 1 TB HARD drive. The reader needs to be connected
to the motherboard. There is a small connector named HDD1 on the motherboard.

But the wire of the connector on the HARD drive is not present, because he has not put any HARD drive in this laptop, I do an insert, not an upgrade.

1. is it at all possible to put a HARD drive in this machine, by plugging the connector "HDD1?

2. where can I get this cable? Various videos say that this cable is of type m2, SATA III, type to other models of VN7 2280.

Thanks in advance for your help

tompin

(which obviously shows the first question on this model Nitro V7)

Hello again

The HARD drive is now inserted and works very well with the portable Nitro.

I inserted a Seagate Spinpoint M9T with 2 TB.

The most complex part of the process overall is openning the laptop.

Once the keyboard part is detached from the body, it is not necessary

disconnect the cables from the motherboard. Simply insert the HARD drive

place cushioned in the lower right of the box.

The HARD drive must be connected with the spare parts Acer cable for

the port called HDD1 on the mortherboard.

First boot of the system subsequently, new HARD drive won't need

win 10. It must be connected manually via the administration of the system.

Concerning

Tompin

Tags: Acer Laptops

Similar Questions

  • Satellite L50-A-19N - HARD disk controller is not compatible SATA 3

    Hello.

    I have a model of L50-a-19n satellite.
    The hard drive it is HGST Travelstar 5 K 1000 750 GB, SATA 6 Gbps (HTS541075A9E680/0J22412).

    On Web site of the manufacturer and as Aida64 diagnostic software the hard drive is named SATA-III 600 MB/s.

    But when I run the Crystaldiskinfo software or simillar, it is said that the taken and current transfer mode supported SATA/300.
    Why is it like that?

    Is this some sort of software limmitation?
    In the Bios, I turned on the performance mode.

    HARD drive supports SATA 6 Gbit/s, but the portable controller is probably limited to SATA II (3 Gb/s)

    If the HARD disk controller does not support SATA III, HARD drive performance will be limited.

  • Portege R830 - external HARD disk error - "target not found device.

    Hi all

    I recently bought a 1HD R830 which has windows 7 as its OS.
    I have a few old external hard disks that were formatted on windows vista.

    When I try to use it on my new computer it says "target not found device.
    I called support for the external hardrive, who said this is an incompatibility problem and that I would need to re format external hard drives (and therefore lose all about them unless I copied them on a compatible hard drive).
    Is this true?

    Rather than go through the hassle to copy all data to another hard drive is there a way to make my new computer compatible with the external hard drive?

    Your help is very appreciated.

    See you soon,.

    Jason

    I have an old drive external HARD with images recorded on it and I use it for years with WXP, Vista, Win7 and now with Win8 too. There is no problem at all so I put t understand what could be wrong with your HARD drive.

    Do you have similar problems with other external devices connected to your laptop Portege?

  • Satellite A200 - 1 M 5: sounds from the HARD disk that is not regular

    Dear,

    I bought a new Satellite A200 - 1 M 5 1 week there are, but I have noticed a noise coming from your hard drive that is not regular, whenever the drive is currently in use, there is a noise from him. It's weird, I had Satellite phones precedents and never faced that.
    is this normal in this series of satellites? or damage my hard drive? Although it works very well so far.

    If anyone has an idea about this, please let me know it.

    Appreciate it.

    THX
    Salim

    > Whenever the drive is currently in use, there is a noise from him. It's weird
    Who is normal behavior that the HARD drive makes sounds while working.
    On some disks, the sound is louder and some drives are quieter.

    My laptop comes with a 100 GB HARD drive and I noticed that this HARD drive work harder than the previous 40 GB HARD disk.

    I don t think that there might be a problem with your HARD drive. It of new.
    So, in my opinion you should t be worried.

    and if the HARD drive is going to die your warranty covers the replacement ;)

  • How to expand your virtual hard disk while host hard disk space is not enough?

    People,

    Hello. I use VM Player 3. My host computer is Windows 7 and VM is Oracle Linux 5. I need to expand the virtual hard drive Oracle Linux 5 from 100 GB to 150 GB. When I click on VM > Settings > hard drive > utilities > expands...

    The error message:

    There is not enough space on the file system for the selected operation.

    To after my understanding, we have enough room to store the VHD original more expanded VHD.

    This means that the free space on the host needs to be 100 GB + 150 = 250 GB

    The total size of the hard disk of the Windows 7 host is 284 GB. The VM already occupies 100 GB of 284 GB. The maximum free space is 184 GB less space and boot OS. This means that I can't develop the 100 GB to 150 GB VHD.

    But I have to expand the virtual hard disk! I don't know if there are other ways to expand the virtual hard disk.

    My question is:

    Folk understand some ways to expand the virtual hard drive ranging from 100 GB to 150 GB drive hard host is only 284 GB?

    Thanks in advance.

    You explained, it is the behavior with monolithic virtual disks, which is a unique hard file. Because the file requires more space for its metadata at the beginning of the file, all the blocks of data must be copied to a new file. With the format of sparse file 2 GB virtual disks can be extended without the need to copy the data into a new file hard, because each the hard contains its own metadata. In case you don't have at least ~ 100GB of disk space you can use vmware-vdiskmanager convert/clone the virtual drive command line utility in a format of 2 GB sparse file, delete the original virtual disk (after saving), then use vmware-vdiskmanager again to rename the new virtual disk to the old name. Once done, you will be able to expand the virtual disk as required.

    André

  • access to the "My Documents" folder on the HARD disk that does not start

    Recently, I got 2 hard drives put in place into a monster of table (SATA) on me. I had an IDE hdd hooked that I had just never deleted. My "mirrored array' failed me so I ended up replacing my MB & CPU and started from scratch. The IDE hard disk has some very relevant info, I need to recover. I can get to basic files in there, but my most important stuff is in my folder 'My Documents' but as far as I can get is to open "Documents & settings". Another thing I try to open fails. I made a password but have no way to enter (at least AFAIK), I would appreciate greatly any help on this problem. Thank you

    Please see how appropriating a file or a folder in Windows XP .
    Boulder computer Maven
    Most Microsoft Valuable Professional

  • My Photos stored on hard disk separate does not open

    my system:

    I saved all my photos on another more difficult due to the large number of it to avoid slowing down my computer.

    I've been to been able to open on and off my Photos, but since yesterday when I try to open it is extremely slow and stay stock to 18%, I'm not on gif because th various apple software update? can anyone help or point me?

    Thank you

    François

    What is the format of the external hard drive (in the finder, click right on the drive and get info to see the format)-there must be as Mac OS extended (journaled)

    What else can you tell us about what's going on?

    LN

  • Computer laptop 15-f211wm Mod #L0T32UA: USB external HARD disk and laptops not detected but used to be

    My USB ports do not seem to work properly.  I used to be able to plug in my external hard drive and mobile phone to transfer files, but now I can't.  In the DEVICE MANAGER of the laptop, nothing seems to be wrong, no red or yellow warning.  However, the USB ports DO not seem to power the devices, my cell phone goes into charge mode and my HDD Seagate you can feel it vibrate slightly.  There are two USB ports on the left side and one on the right, and all three can not detect devices.  Help, please.

    HERE IS a GUIDEto solving the problems of USB such as described in the post.  See if any of these help.  As you have posted in the notebook section, when you do that a single step to cripple, also remove the battery after the computer shuts down, unplug charger, too.  Then hold the power button for at least 30 seconds before feeding back.

    BTW: have you tried to delete all things under the rubric of the USB in the Device Manager, then reboot to allow Windows to reinstall the USB ports?

  • can you get back from the videos that are live foods and does not store on anywhere they would always hard disk drive somewhere not

    We were broadcasting live online do you know if that would be stored on my hard drive any where... or can they be high anyway... ?

    Sorry, but the live feeds are not saved and cannot not even be found using recovery software because they have not been saved as files.

    I wish I had better news, but they are simply not on the system (unless you have chosen to save them).

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Hard disk space do not correspond with the size of all the content files!

    In the properties of "my computer", my placeholder is (?) 114 GB
    My files are almost empty!
    If I choose theall files on the hard drive and click Properties, the size is only 50 GB!
    All waste are removed, I ran degfragmatation and my memory Visual option is 'auto '.
    I do not understand why this submission therefore difference between.
    Can you help me please?

    In the properties of "my computer", my placeholder is (?) 114 GB
    My files are almost empty!
    If I choose theall files on the hard drive and click Properties, the size is only 50 GB!
    All waste are removed, I ran degfragmatation and my memory Visual option is 'auto '.
    I do not understand why this submission therefore difference between.
    Can you help me please?

    ... I forgot... my laptop is very recent, almost 15 days...

  • My USB hard disk drive does not appear in my computer, but is seen in the BIOS and not in disk management or anywhere else! What should I do now?

    I use windows 7 Professional 64-bit. The hard drive I had does not appear in my computer, but it does in the bios. What should I do to make the data available to me in the hard drive?

    Sunday, January 20, 2013 11:46:37 + 0000, Nikesh1123 wrote:

    I use windows 7 Professional 64-bit. The hard drive I had does not appear in my computer, but it does in the bios. What should I do to make the data available to me in the hard drive?

    On which computer data has been put on this drive? What is the file
    the drive system?

  • Additional HARD disk, PC does not start.

    I'm under a Dimension 9200 on Windows Vista Ultimate Edition.

    I just bought a 1 TB Western Digital Caviar Green Power drive.  I plugged on one of the locations additional sata on the motherboard and pc market.  I have an IDE installed RAID card normally shows directly after the dell logo, and detects my old three disks IDE and their config raid which is fine.

    Reference Dell also provided me with two drives of 320 GB in a raid configuration, using my C drive, which he would then normally detect.  However, when the new drive is connected it just displays an error message, something can not find bios.  I have not disconnected or changed their cables somehow.

    When I disconnect the new drive again, the pc boots fine.

    I tried to enter in the configuration with the drive connected to change the boot sequence, but it won't let me enter the configuration.  I can enter the installer without a connection, and I assured my normal C drive is the first boot drive, but it still does not work.

    I'm not trying to add it to one of the raid configs current sport im, I want just that he's a player, I thought that it would be virtually plug-in, turn on, format and leave, but no luck!

    Someone made me what I am doing wrong?

    Message edited by BiggyG on 09/09/2008 13:39

  • MicrosoftOffice keeps trying to install it on hard disk Drive does not exist (Q)

    Microsfost Office continues trying to install hard drive (Q) to non-existent

    I get an error message of microsoft office 2010 which its tries to install to Drive (Q), that is a bug or something but there doesent there is no disc hard secondary any body knows how to change where he moved to?

    Microsfost Office continues trying to install hard drive (Q) to non-existent

    I get an error message of microsoft office 2010 which its tries to install to Drive (Q), that is a bug or something but there doesent there is no disc hard secondary any body knows how to change where he moved to?

    You try to install the 'click-to-run"of MS Office installation.  That's what trying to create your Q: drive.
     
     
     
     
  • HARD disk space reduced after upgrade of RAM on my Satellite L20

    Hello

    I upgraded my Satellite L20-120 to memory 2 GB of Ram (2 x 1 Go DDR2-Ram),
    but this seems to my 1 GB free hard drive space. If I use my old 1 GB Ram
    (2x512MB DDR2-Ram), the add.1GB is available again. OS is Win XP Pro.

    Everyone does now the reason to this?

    Thanks in advance.

    According to the specifications of your Satellite L20 follow Rams:
    DDR2 400/533 256 MB (PA3389U - 1 M 25)
    512 MB DDR2-400/533 (PA3412U - 1 M 51)

    Good bye

  • I have a laptop Advent6552 with apartition hard disk recovery program I'll be able to erase this point when I install windows 7

    will I have it clear before I upgrade or will it outomaticly clear when I update Vista fron?

    Hello

    If you do not need all the data stored in that partition, I suggest that you format.

    See: http://Windows.Microsoft.com/fr-fr/Windows-Vista/Create-and-format-a-hard-disk-partition

    Note: Upgrading to Windows 7 will write only the operating system files to this partition.

    See also: http://windows.microsoft.com/en-US/windows7/help/upgrading-from-windows-vista-to-windows-7

Maybe you are looking for

  • Satellite L does not start correctly

    My laptop sometimes has problems to start. I opened the laptop & it tries to start, but the "num lock" and "caps lock" LED (green) lights remain lit. If the laptop starts properly, the light turn on for a very short time and switch immediately. It do

  • Satellite L300D - black screen on startup

    Hi guys, I need help please. On Thursday, I was on my computer and noticed that the weather was bad, I thought I have to do something wrong and were going to remedy. I went to my computer, but it wouldn't boot just had a black screen. I knew that I d

  • How to install applications on v4.1 Simulator?

    How are supposed to be installed / run on the Simulator v4.1? The only thing I found was something to drop the files in the root installation directory, but place the cod/JAD has no effect (after a reboot).

  • CAN'T DOWNLOAD ACROBAT STANDARD DC?

    When I try to download Acrobat Standard DC all get is a list of countries and no way to select and start the download... What I am doing wrong?

  • CDC enable sqlserver

    Hi allSQL SERVER 2008 ENTERPRISE EDITIONGG 11.2.0.1As a precondition for replication from SQL Server to oracle, I am allowing the CDC on the sourcedb.============USE acrdbgoexec sys.sp_cdc_enable_dbgo=============But I got this error:============MSG