VNC on LAN

Similar Questions

• RV220W. Problems LAN WLAN <>-

  I recently bougt garage this router for his VLAN and a high flow. It replaced a standard Linksys DIR-655

  But now I am having problems connecting my Samsung Galaxy2 (Android 4.0.3) phone to my computer. Phone is connected to the WiFi and the computer is connected to the wired LAN.

  When you start Kies on my phone (it is a Web server application) it tells me to connect to http://192.168.1.202:8080 / on my computer. It's the correct IP address for the phone (I booked it on the router) and the firewall is DISABLED in windows 7.  But there is no response with firefox or IE8.   I haven't changed anything on the computer or on the phone because I replaced the router, so the problem must somehow be connected to the router.

  Phone and computer are connected to the internet OK.  I can even remotely control the computer from the phone using the VNC app on the phone! If the network is working. The problem is only related to the communication with the Kies application.

  Anyone who might know what is happening?

  Armand,

  Unfortunately if the network works then there is nothing more that can be done with a view to support Cisco HWC. However, I found a link that I think can help. Please keep in mind that any changes made as a result of the information contained in this post will be made at your own free will.

  http://androidforums.com/Samsung-Galaxy-S2-international/359070-trouble-Kies-air.html

  Hope this helps

  Blake Wright

  HWC Cisco network engineer

• Trying to connect a computer to the lan port Aiport Express "auto assigned IP address"

  I am trying to connect a computer to the lan on my Airport Express port. In preferences, it says "status: connected, Ethernet has an assigned IP address and won't be able to connect to the internet." Any suggestions?

  An "auto assigned" IP address indicates that your computer could not find or negotiate with a DHCP server to obtain an IP address appropriate for network access.

  It should be more on your network to provide assistance if you need it. For example, is the terminal of AirPort Express the only router in the current configuration of your network? What exact model do? What is the brand and model of your modem Internet?

• Problem with LAN Express airport

  Hello

  I recently bought an Apple AirPort Express router and I have several problems using the Ethernet with the most active airport. The thing is with my old router, I could have been connected to the ethernet cable, while at the same time connected with a LAN cable to my Macbook (end of 2015). The old router would have generated a wifi connection, but at the same time, would have enabled internet connection by cable to my Macbook without the active WiFi. People could use WiFi at home, but the Macbook would be connected to the internet by cable (lan cable connected to the router)

  My question is how to turn on a cable connection on my Macbook using the AirPort Express LAN cable, while at the same time, keep WiFi active. Currently, I have the ethernet cable connected to the airport and cable Lan also connected to the airport and the Macbook, but the internet will not work unless the WiFi is active. I would like to turn off the WiFi on the Macbook and always have an internet connection through the LAN cable that is connected between the AirPort Express device and Macbook.

  Thank you

  My question is how to turn on a cable connection on my Macbook using the AirPort Express LAN cable, while at the same time, keep WiFi active.

  Is the Terminal AirPort Express the only router in the current configuration of your network? No matter, what is the brand and model of the modem Internet you have the Express directly connected by Ethernet? ... or is the Express connected by Wi - Fi to the modem?

• If 2 Airport extreme can stay connected to each other using their LAN ports?

  Hello friends,

  I would like to know if 2 Airport extreme or 1 Airport Extreme and Airport Express can stay connected to each other using LAN ports at the ends? I thought this is the LAN port 1 connected to the WAN port on the 2nd.

  Thank you

  To clarify the issue and the scenario, one of my friend described a typical scenario in which there are 2 AEs. AE1 has an ISP in its port WAN and AE2 has a different ISP in its WAN port. This 2 AE can mutually connected between them by using ports LAN AE1 and AE2 ethernet cable? He said this could be feasible if AE2 remained in bridged mode, without using the ISP attached to its WAN port. I just don't get how this is possible. Friends of the search help.

  Thank you

• iPhone 5 use with w - lan only?

  Hello, it is possible to use the iphone 5 without sim, with w - lan only? For the first installations, later with the sim card? IPhone 4 doesn't work without a sim card. Thank you

  You will need to have a sim card in the phone to activate when first implemented, after that you can remove the sim card and use it with wifi only.

• The LAN on an Express port still works as a LAN port when in mode "extend the Wi - Fi network"?

  Assuming that the current versions of all units in the airport:

  If you have an extreme as your primary access point, and you have an Express "extend a Wi - Fi network" mode, the LAN on the Express port still works as a LAN port?

  Yes. You can connect any Ethernet device to that port.

• White / white window FF when aired by VNC / Teamviewer / NoMachine

  Hi, I'm a desktop PC Windows 10 remote using Real VNC, TeamViewer, NoMachine and other access.

  The point is Firefox and Chrome appear as white / white windows when opening, one thing is not happen to the native Internet browser = Microsoft Internet Explorer and MIcrosoft Edge, both behave normally. I have to use Microsoft browsers instead of my beloved Firefox.

  Could someone tell me why FF and Chrome are not disseminated, and instead, I get a blank, white, window I can nothing more than to shut it down?

  Thank you.
  PS: My client computer is a Windows 8.1 and the distance with browsers is a Windows 10.

  Hey Fulmercurio, I did some searching around and perhaps found what was causing it. Apparently in Windows 8, anything that requires a GPU treatment would not be made (ex: closed the lid of the laptop or monitor). It is possible that it may have carried forward in Windows 10.

  Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.

  You will need to restart Firefox before this takes effect so save any work first (e.g. you compose mail, documents online that you are editing, etc.).

  Then perform the following steps:

  1. Click the menu button

     

     then select the Options under Windows or Preferences on Mac or Linux.

  2. Select the Advanced Panel, then on the general tab.
  3. Uncheck the use hardware acceleration when available.
  4. Restart Firefox and see if the problems persist.

  This solve your problems? Please report to us!

  If the problem is resolved, you should check the updates for your graphics driver by following the steps in these articles in the knowledge base:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox
  • Update your graphics drivers to use hardware acceleration and WebGL

  Thank you.

• WIRELESS and wired LAN do not know each other

  My internet provider installed a new cable modem, without capacity WIFI because I have an airport extreme base WIFI (with cable Express extensions).  Speed and quality are OK, wireless and wired, but there seems to be a wall of China between WIFI and wired (LAN): devices that are connected via a cable to my LAN are not visible from the wireless network and vice versa.  Airport extreme is not 'Bridge' mode ("because not of wireless on the new modem capability".)

  No idea of the reasons for this?  Thank you very much

  Sounds like the configuration of the device. With the airport devices it can operate as a device on the network or another firewall as its own network. I think that it is way jumpered to activate, this will allow you to configure the wireless on the airport, but your current router will do the DNS/DHCP and will be a single network.

  Now that you have configured as two routers on an independent network as there is no bridge.

• Wake on LAN - AirPort Extreme

  I'm trying to configure the Wake on LAN for my AirPort Extreme and Windows 7 PC, reboot with my iPad.  It works fine when the iPad is on the local network, but no power on the PC when I'm not on my network domestic.  I put airport to the port before 9 to the PC as directed, and made sure the PC has been configured to accept magic packets.  Any help?

  Apple wake on lan system is different... and there is a good chance the router from Apple not go to work.

  The best and easiest around the issue is to install a different router... and use airport extreme for the wireless. Make sure the PC is connected to the main router although no airport.

  http://www.Neowin.NET/forum/topic/1186835-wake-on-LAN-WOL-with-Airport-extreme-2 013 /.

• Path of Time Machine LAN and WAN

  Hello

  are the possibilities to two paths setting in Time Machine?

  I need to connect different network in my LAN and WAN net.

  Lives

  If you are an experienced user familiar with the shell, you can add a unicast domain name or IP address to the list of destinations used by Time Machine backup. It will then use the server as long as it is accessible on the network. If it's a good idea or not depends on the circumstances.

  Find the verb 'setdestination' in the tmutil manual page (8).

• How can I change my LAN settings?

  I can't find the tools, is not there. So, how can I change my LAN settings.
  Or where can I find tools?

  You can press the ALT key, or press F10 to display the Menu bar.

  You can also find an Options/preferences button in the bar '3' Firefox dropdown menu button at the right end of the Navigation bar.

  • https://support.Mozilla.org/KB/learn-more-about-the-design-of-new-Firefox
  • https://support.Mozilla.org/KB/common-questions-after-updating-to-new-Firefox

• I have a macbook pro 13 early 2015. Now I can here a clicking sound when I move the lanes on the side mac. Feels like some hardware is loose inside. But my mac works well as well. I left about 80 days of warranty. I'd give to repair? suggestion pls

  I have a macbook pro 13 early 2015. Now I can here a clicking sound when I move the lanes on the side mac. Feels like some hardware is loose inside. But my mac works well as well. I left about 80 days of warranty. I'd give to repair? Someone had this problem? Suggestions please...

  nidgp wrote:

  I left about 80 days of warranty. I'd give to repair?

  Absolutely, examined her!  There is some kind of hardware problem.

  Ciao.

• Printer sharing via LAN - EPSON XP-335

  Hello

  We use 3 Macs connected via LAN (Ethernet, we do not use Wi - Fi).

  I have connected an EPSON XP-335 via USB to Mac #1, and it prints fine.

  On all Macs, I installed the software EPSON printing and active "Sharing printers", via preferences > sharing.

  but when I try to print from Mac #2 or #3 I get this message "not connected":

  

  What should I do?

  Thank you very much.

  Hi coxorange,

  Please use the Apple Support communities for help. From your post, I understand that you are unable to access the printer that is connected to one of your iMac, others in the House. I know it's nice to be able to print from all of your devices, so I'm happy to help you to provide advice for this.

  From the information you provided, it seems that there is some confusion about the way the printer is shared on your devices. In order to have a shared printer, you must only share from the computer to which it is connected. From there, you can connect to this printer with other computers. Perform these steps on the iMac to which it is attached:

  How to share a printer:

  1. Open sharing preferences if it is not already open (choose Apple menu > System Preferences and click Sharing), then check the box print sharing.

  2. Under printers, select the printer you want to share.

     When you share a printer, all users on your network ("everyone") can use by default. If you want to restrict access to specific people, go to steps 3 and 4.

  3. Click on the button Add at the bottom of the users list, and then do one of the following:

     • Select a user in users and groups, that includes all your Mac users.

     • Select a user from the network or users groups network, which includes everyone on your network.

     • Select a person in your contacts. Create a password for the person, then click on create an account.

  4. When you add people to the list of users, access to the shared printer is reset to no access for the users of your network ("everyone"). To provide access to everyone again, click the triangles, then choose can print.

  Source: OS X El Capitan: share your printer

  Once the printer is shared, you'll want to implement on your other computers. Check out the second section of this article, titled "Add a Wi - Fi or network printer":

  OS X El Capitan: Add or remove a printer

  If you continue to have problems with your printer setup, here are some additional articles that may help you identify the problem:

  OS X El Capitan: print troubleshooting

  Troubleshoot printer on your Mac

  I hope you have a great rest of your day, cheers!

• TC 1302 via a LAN cable?

  Hi, I have a new MacBook and replaced so access to my TC.

  The TC is installed within a university network via cable, and I still have the problem to get connected to the internet.

  I installed WLAN and it shows my network.

  However, I want to make my backup, which is not possible via WIFI, such as the TC is not properly installed in the internet.

  So I run the backup vial Ethernet/LAN cable.

  But I still have the problem:

  • where to plug the MacBook (I have a USB-Ethernet adapter for the retina of 13 MB) in the TC? The man or the host 3 ethernet Ethernet plug?
  • How can I tell my MB and the TC that the GET connected? (as I can't see the TC on my MB as device)
  • the reform through to get a proper backup?
  • and: does anyone have a tip for the installation of a TC in a protected University LAN/WLAN? who are the preferred settings? (I spoil in a point and I'm not fixed)

  Best regards, Steffen

  The TC is installed within a university network via cable, and I still have the problem to get connected to the internet.

  Most likely, your University has an Internet router at the other end of this cable. That would mean, you need to configure your TC properly in order to access the Internet. The best course of action is to speak with your University of departmental it to get this set up.

  However, I want to make my backup, which is not possible via WIFI, such as the TC is not properly installed in the internet.

  The TC has NO need to have an Internet connection to use Time Machine for backups. Your Mac has just need to be on the same wireless network that provides the TC.

  • where to plug the MacBook (I have a USB-Ethernet adapter for the retina of 13 MB) in the TC? The man or the host 3 ethernet Ethernet plug?

  It must be plugged into one of the three ports LAN (opposing arrows).

  • How can I tell my MB and the TC that the GET connected? (as I can't see the TC on my MB as device)

  In its default configuration, the TC will broadcast a Wi - Fi network that is not secure, with a network name of something like: Apple network NNNNNN. You just need to connect your MB to this network.

  • the reform through to get a proper backup?

  Sorry, but I do not understand your question.

  • and: does anyone have a tip for the installation of a TC in a protected University LAN/WLAN? who are the preferred settings? (I spoil in a point and I'm not fixed)

  Yes, talk with your University computer support staff.