Vodafone Bewan router can be connected to the a Linksy router?

want to extend the home network

That is a good question. Then, ask the people at Vodafone Bewan.

Tags: Windows

Similar Questions

  • I can't connect to the net without being plugged in the router

    We just bought this HP dv6 - 6033cl and I can't connect to the net without being plugged in the router, can someone help us please

    Hello

    1. what exactly happens when you try to connect through wireless? Do you receive an error message?

    2. If it works well before?

    3. don't you make changes to the computer until the problem occurred?

    I suggest you try the steps below and check if it helps

    Step 1: In the Windows wireless network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows?T1=Tab03

    Step 2: If the problem persists, try uninstalling and reinstalling the Device Manager wireless connection,

    a. click Start, type Device Manager in the start search box and press ENTER.

    b. locate the network adapters and expand the same.

    c. Select the adapter, right click and select Uninstall.

    d. restart the computer, if prompted.

    Pilots should settle automatically after the computer restarts.

    More information: See here

    Wireless network card: frequently asked questions: http://windows.microsoft.com/en-US/windows-vista/Wireless-networking-frequently-asked-questions

    Hope this information is useful.

  • Can not connect to the internet via my router

    I recently changed my dsl cable and Internet service provider. Everything worked fine when I had dsl (no problem connecting by router) but now I can only connect to the internet when the cable modem is connected directly to one of my PCs. I tried to reset the router by default and computers can see each other on the lan, but after trying to reconfigure the router with the modem cable connected it does not detect not the new address ip & dns info even if the adapter is configured to receive the ip address and dns automatically (in windows and the settings of the router.)

    Is there something else in my network installation of Windows 7 that needs to reconfigure?

    Hi Viking_Dan,

    It is really difficult to troubleshoot network connections because there are so many factors that might cause a problem. I'll do my best, however.

    Make sure that you connected the modem cable to the router using the Ethernet port on the router (Wide Area Network) "WAN". Then try to ping the router from an elevated command prompt window. The default IP address is usually something like 192.168.1.1, or similar. Check with your router's configuration. The ping command is:

    Ping xxx.xxx.xxx.xxx

    (where the x's represent the IP address)

    You will receive all 4 packets back with 0% loss. If you do not have, so I'm puzzled. If you receive all 4 packages without losses and still can't connect to the internet, then check if the radio for the router matches the capacity of your PC. Your router may have a frequency of 2.4 GHz only, only 5 GHz, or a mixture. Your PC can support one of those, or both. Check to see if they match.

    If it still does not work, try to set a static IP address for each of your PCs, with the IP address of the router as the default gateway. For the DNS server, I suggest that you use the DNS from Google free, fast and secure server. The IP address is 8.8.8.8

    Let me know what happens

  • Can not connect with the Adobe server to upgrade the PS. Tried with fiervall and the router and called my provider. She is also only CC there are problems!

    Can not connect with the Adobe server to upgrade the PS. Tried with fiervall and the router and called my provider. She is also only CC there are problems!

    Check your hosts file.

    help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  • Can not connect to the WiFi on MacMini 2014

    When I try to connect to any WiFi on my MacMini it says ' Unable to join, try to get closer the router. but the router is right next to my Macmini.

    In addition, my wifi connection is correct. It is easily connected to my iPad and iPhone.

    I tried transferring a file using release from my iPad to MacMini. It worked.

    When I tried to connect to the MacMini with ethernet cable, it worked too!

    The only problem is that I can't connect to the router using the wifi on my MacMini.

    What should I do?

    Try to create a new network location:

    Using network locations (Mac OS X 10.6 and later)-Apple Support

    Try to connect as a different user.

    Have you removed the Mini?

    AirDrop uses bluetooth

    http://iPad.about.com/od/iPad_Guide/SS/what-is-AirDrop-how-does-it-work.htm

  • I can't connect to the Internet wirelessly

    I just replaced my wireless device and now I can't connect to the Internet wirelessly

    Hi JimMahoney,

    You have installed the necessary drivers for your new wireless device?

    You receive an error message when you try to connect to the internet using your router?

    What virus protection software is installed on your computer?

    I suggest you try the steps mentioned below.

    Method 1: Run the network troubleshooter utility in Windows 7.

    Please follow the steps below mentioned link to run the network troubleshooter utility

    http://Windows.Microsoft.com/en-us/Windows/help/network-connection-problems-in-Windows?T1=Tab03

    Method 2: You can also check the configuration of your new wireless device.

    Contact your Internet Service Provider (ISP) or wireless device manufacturer to check the configuration of your wireless device.

    I hope this helps.

  • I have a WAN Miniport PPPOE problem. Can't connect to the internet.

    I have a WAN Miniport PPPOE problem. Can't connect to the internet.

    Hello

    If you have a Modem and a wireless router or a Modem/Router combination. Read its manual and configure the WAN for PPPOE port.

    http://www.ezlan.NET/PPPoE.html

  • can not connect with the server.

    I can't connect to the internet. WI - FI connected and at full power. This just happened and it's never happened before.

    Hi, it seems that there is a problem with the connection between your router and the dsl modem. Make sure the pin of the Ethernet cable is plugged correctly in any LAN port available on DSL Modem and on the WLAN port in the Wifi router.

    Go to 192.168.0.1, run the installation/quick installation program from this interface and make sure that you preferred DNS address type 192.168.1.1 or default of the DSL Modem ip address if you know it's different.

    It is always a good thing to restart both the DSL/ADSL Modem wireless router periodically to refresh the system and you will face less problems like the one you face now. If both modems are enabled for quiet a long time, it can either be hanged or perhaps become hot to damaged. So reboot them once quiet often when not on duty.

    Mark as answer if it answers your Question. Mark as helpful if it helped you continuer.* *.

  • How can I connect to the internet? Problems involving the network and sharing Center does not.

    Hello.
    I live in a House and bought a range extender so that I can get a connection in my basement as well.  I have installation range Extenders without problem.  When you install the range extender, I changed my name to my network router.  I changed the name of the network by typing 192.168.1.1 in my browser.
    The MacBook connects without a problem.  In the basement, the connection of Windows 7 works very well.  I have just connected Vaio Windows 7 my mother to the network, but it prompted that I enter the user credentials.  I read a post above and got that problem solved by opening the network and sharing Center and adding a new connection.  Now that the connection is configured correctly.
    The problem is with the laptop HP Windows Vista family basis.  Since I install the range extender, I can't connect to the network.  He had no problems before you connect the router or other networks to visit other places.  The new network name appears, but when I click it, it says I have to enter the user credentials.  I tried to manually, but the name is taken so I can't make a new and invites me to connect to the network that is established or to connect to a different network.
    • I tried to open the network and sharing Center, but it does not open.  When I click it, it opens a screen for a brief second.  The option "Display the status of network and tasks" opens either.
    • I logged as an Administration by entering the command line < net="" user="" administrator="" ctive:yes=""> > and restarted the laptop.  Even logged in as administrator, this folder does not open.
    • I also did a scan < sfc="" cannow=""> >.  The digitized rolled up with an error, but the error has been corrected.
    • I also updated the connection of the range extender.
    Why the network and sharing Center will not be open to the top?
    How can I configure my router my HP Windows Vista Linksys connection?
    Thank you.  Please let me know if you need more information.

    Thanks for your reply.

    In a last attempt, my sister has used the ethernet cable to connect directly to our router.  Next time, she turned on her laptop, she managed to connect to our wireless network and she was not invited to enter credentials.
    In this case, the manual connection helped solved the problem.
  • Unable to connect to wireless internet; can only connect to the network, saying "Local only" or "limited connectivity".

    I have problems to connect to any wireless internet - home, library, coffee shops.  He used to work, began to get in trouble (i.e. could not connect sometimes to the diner, but works in the library) and now does not connect to internet AT ALL wireless.

    Only connects to the network saying "local only".  And I'm lucky even get that much.  Furthermore, I don't know if it's a router problem or what, but it does not even accept the password for my home network (my boyfriend has no problem on the internet with Windows 7 and the current router password).

    I use a HP G60 laptop (maybe?), I don't remember the model exactly.  Windows Vista.  I am frustrated beyond belief.  I took the computer to Best Buy and the man suggested that contact Microsoft because, in his own words, "this seems to be a very common problem with the adapter wireless in Windows Vista".

    In summary: is it a hardware or a software problem?  It seems to be a software problem that can have an impact on the material.  Nevertheless, what can I do to fix this?  Y at - it a software update, I need to try for my wireless card?

    This computer is not yet a year old, and already I am unable to use it for the internet.  Not very well I plug my ethernet cable router wireless in the library.  I bought a laptop for a reason, but it is on track to achieve more like a desktop.  Very disappointing.

    Someone, please help!

    I took the computer to Best Buy and the man suggested that contact Microsoft because, in his own words, "this seems to be a very common problem with the adapter wireless in Windows Vista".

    Is this a hardware or a software problem?  It seems to be a software problem that can have an impact on the material.  Nevertheless, what can I do to fix this?  Y at - it a software update, I need to try for my wireless card?

    Hello

    When the man from BestBuy, fortunately for us technology is not a cleaning product, there is no way of knowing if someone puts his hand on it and knowing what is wrong rather than moving oral reprimand...

    First step, log on to the HP support and download the latest drivers for your wireless card.

    The HPG60 is a very good phone but its wireless card has problems with old drivers.

    In which case it's a hardware problem, contact HP support.

    In general, you can use this process to find out what's wrong with the wireless.

    Most laptops have a physical switch for the wireless card. Read the manual of the computer and make sure that the wireless adapter is on.

    Check the Device Manager for the wireless card valid entry.

    http://www.ezlan.NET/Win7/net_dm.jpg

    If there is no valid entry, remove any entry from fake and re - install the drivers for the wireless card.

    Check network connections to make sure that you have a network icon/entry wireless connection, and that the properties of the icon (right-click on the icon) are correctly configured with the TCP/IPv4 protocol in the properties of network connections.

    http://www.ezlan.NET/Win7/net_connection_tcp.jpg

    Make sure that if there is Wireless Utility a utility vendor is not running with the native Windows wireless utility.

    Make sure you firewall No. preventing / blocks wireless components to join the network.

    Above everything is OK and it connects to the wireless router. Log in from any computer which is, or can be connected to the router with a wire wireless, disable wireless security, make sure that the wireless streaming is enabled and try to connect with no. wireless security.

    When the work turns on the Wireless security.

    Note * people sometimes make mistakes in writing and retype the password for security.

    Another way is to copy in the menu of the router and then paste it when asked of the wireless card.

    --------------------------------------------------

    I really checked and configured every thing and it doesn't work.

    Software firewall application that is not configured to allow local traffic (between the computer and the router is also a possible problem.
    some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • "iPhone is disabled, connect to iTunes" AND "iTunes can not connect to the iPhone because it is locked with a password" error message on the phone and the computer! Help!

    So I recently had my password wrong too many times and my iPhone 4S locked out telling me "iPhone is disabled; Connect to iTunes'. And so I connected to iTunes and decided to restore my phone. I finished the process of restoration of the configuration of my phone, but ultimately, it was not even let me in the phone! Once AGAIN he said "iPhone is disabled; " Connect " to iTunes '. However, this time, this message appeared just when I turned on my phone with a black background. I didn't scan the screen for the error message is displayed (and there was no time to be shown). When I tried to connect to iTunes again as he asked, now it says "iTunes can not connect to the iPhone because it is locked with a password".

    So now, he said "iPhone is disabled; ' Connect to iTunes' on my iPhone 4S and ''iTunes can't connect to the iPhone because it is locked with a password ' on my computer. WHAT should I do?

    As described in step 2 of "Erase your device with iTunes" in this article, you will need to use the Recovery Mode.

    Recovery mode is described in this article as well.  You may try to go into recovery mode more than once to succeed.

    If you have forgotten the password for your iPhone, iPad or iPod touch, or your device is disabled - Apple supports

  • Since the update to El capitan OSX 10.11.4 on my Macbook Pro (2012) I can not connect to the app store - ideas?

    Since the update to El capitan OSX 10.11.4 on my Macbook Pro (2012) I can not connect to the app store - ideas? Im not geek so please be gentle!

    Try restarting mode without failure. To restart in safe mode, restart the computer and press on and hold down the SHIFT key until the Apple icon appears. The computer starts more slowly than usual because the disk utility checks the drive. After getting on the desktop launch the App store and try to connect. Successful or not, once you're done, restart normally to exit safe mode.

  • I know my id and changed my password and everything. But I can't connect to the iTunes Store!

    I know my Apple ID and have changed my password. But I can't connect to the ITunes Store. Cannot understand it.

    iTunes - official Apple Support

  • Unable to send emails, SMPT can not connect to the server

    I use the latest version of the EL CAPTAIN 10.11.04, just updated software, and I can not send my emails is to show only SMTP error can not connect to the server.

    I can receive emails, but cannot send emails. I deleted the account and reinstalled it once again changed the SMTP Port 25, 465, 993 trying all of them.

    Please advice, or guide me what I am doing wrong, or what I can do to fix this error.

    Please take each of the following steps that you have already tried, tests after each of them. Back up all data before making any changes.

    Step 1

    In the Mail menu bar, select

    ▹ Connection Doctor window

    In the window that opens, double-click on behalf of SMTP (outgoing mail) problem. it. another window opens, displaying the list of all outgoing mail accounts. Choose the one that you clicked.

    Select the Advanced tab in the settings for the account and check the box marked

    Automatically detect and maintain the account settings

    If it is not already done.

    If there is more than one account of the problem, repeat. Close the window and save the changes.

    Step 2

    Open again the list of SMTP servers. Note the problem server settings, then click the sign button less to delete and confirm. Click on the sign more and recreate the account with the same settings.

    If you use Gmail, remove the account completely in the preferences panel accounts Internet and re-create it. The option "detect and maintain" must be selected in advanced settings for the incoming mail account.

    Messages will be again synchronized with the server automatically. Which can last for hours if the mailboxes are very large.

    Step 3

    Quit Mail runs. Launch the Keychain Access app and enter the name of the server of mail out in the search box. For example, if you use Gmail, enter

    SMTP.gmail.com

    Make a note of the password, and then delete the keychain items. The next time Mail connects to the server, it will prompt for the password. Enter and save the password in the keychain.

    Step 4

    If you use Gmail, sign in to your account on the site, and in the account settings, click the "Sign-in and security." There should be an option somewhere on the page to "allow applications that are less safe." Enable this option and save the change. Note: I don't use Gmail and I have not tested this solution myself. If it does not, either make you on Google user forums for help, stop trying to use Gmail with the e-mail, or just stop using Gmail altogether (strongly recommended).

    The mail server can use a form low, obsolete encryption for secure communications with customers. Recent versions of Mac OS X has changed the behavior of Mail and other applications so that they no longer tolerate low security.

    Log on to the e-mail account on the website and see if there is a security setting, you can change. I can't be more specific. Refer to the documentation of the service provider.

    If there is no adjustment, convince the upgrade of server securityserver administrator. He or she must do it anyway. Low security affects all customers, not only Mac users.

    Otherwise, you have all the right options to continue to use Mail with the service. You can disable SSL in the Advanced account settings, but that is very dangerous and may not work at all.

    You might be able to get a more flexible mail client, such as "Thunderbird", to accept the low security, or perhaps you can access the account via webmail.

    Ideally, you should switch to a provider of postal services better. You would not have this problem with a well-run service. The risk of weak SSL are known for a long time, and to competent server administrators have already taken the simple steps are sufficient to avoid these risks.

  • After update my iPad iOS 9.2.1 to 9.3 live 2 I can't connect to the activation server and does not have the latest version of iTunes to activate

    I downloaded the update to iOS over-the-air 9.3 and installed. Setup cannot connect to the server to activate the ipad2. The message is to try again in a few minutes or connect to iTunes to activate. Yes, I have the most recent and current iTunes version, so this isn't the issue. iTunes recognizes the iPad as my ipad2, but cannot do what he done to be able to use iTunes to activate it. I have 2 iPads. iPad 2 and iPad 4th generation. iPad 4th generation downloaded on-line and updated and active and install without problem. IPad2 updated and not can not connect to the server to activate and I connect to iTunes to activate as the message says, but iTunes cannot activate because it sees my ipad2 and that's all that. Of course, I'll try again once activate WiFi tomorrow but any suggestions would be greatly appreciated.

    Thand you

    same problem with you jerryenea. This seems to happen ipad 2 only? my itunes cannot check my ipad

Maybe you are looking for