Voice mail

Similar Questions

• How to make a record that I downloaded on my computer and to make into smaller files so that I'd be able to send them an existing voice mail? From now on, the file is large to send

  How to make a record that I downloaded on my computer and to make into smaller files so that I'd be able to send them an existing voice mail? From now on, the file is large to send.

  Hi kristieann,

  ·         What version of the operating system is installed on the computer?

  You can search for any third-party application, using your favorite search engine to split the recording file.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

• Need help with MWI for voice mail on SIP with SPA9000

  I can't get my MWI to work with my answering machine SIP.  I have:

  SPA9000

  1 SPA962

  1 SPA941

  My ITSP is Mconnect and my SIP phone number is configured for line 1 on the SPA9000.

  I am using their voicemail.  I want the MWI light only on my phone SPA962.  I packed an id 1101 for this phone's mailbox.  I can press the message button and connect to my voicemail, but I don't get a MWI when I have new voicemail.

  Here are the settings for voicemail, I SPA9000 > voice > line 1:

  Mailbox repository URL: mysiptelephonenumber@line1proxy

  URL for mailbox management: even the form of mailbox repository URL

  Mailbox subscribe URL: it is indifferent to what I put in this context, nothing works.

  MConnect gave me a few things to try, but they do not work either.

  Any help is greatly appreciated.

  Marti

  I googled my question and found the answer here on this forum in a post from last year!  My MWI now works as it should when I have voice mail on my SIP line.

  Here is the link to the post on this forum where I found the answer:

  http://forums.linksysbycisco.com/Linksys/board/message?board.ID=VoIP_Phones&thread.ID=3899

  Also be sure to enter the URL for the mailbox to subscribe, filing and management.

  Mine are my number of mailbox @ the proxy for the line that my SIP line is activated, which is Line 1

  Marti

• Xperia vs provider voice mail answering machine

  Hi all

  I understand that no signal the auto responder Xperia will not work, but is it possible that when you don't have your email automatically provider signal will take over?

  Also, how people found the xperia answering machine, preferable to the voicemail provider?

  Thanks for all the answers.

  Jack

  Jack2016 wrote:

  Hi all

  I understand that no signal the auto responder Xperia will not work, but is it possible that when you don't have your email automatically provider signal will take over?

  Also, how people found the xperia answering machine, preferable to the voicemail provider?

  Thanks for all the answers.

  Jack

  Hi Jack,

  I assumed you're impatient for the voicemail provider take care if the phone does not have signal to accept incoming calls, and that's why you need the supplier to get the job done for the record. (Hope I've understood)

  If this is the case the answering machine should always be active or subscribe to voice mail from the provider. While it will alarm if your phone is out of coverage or signal.

  If you don't want the call to voicemail while hone is on the cover or within the range of the signal so that he could go on your answering machine on the phone, I think you could tweek simply time to how dry or rings for this trigger for recording?

  For the preferences of answering machine and voicemail. I think that this may differ or vary by country. Some charged extra service provider be activate this service and some countries is as a monthly fabric which will include them on your monthly bill.

  Ofcause, if the service is free, so why not? I would like that they on anytime if I can, so that I would not have missed something important to all calls. Hope this will help a little.

• Voice Mail only considerations

  Anyone know of a document that describes the 'exceptions' and best practices for a single installation of VM, collection and/or? Such as the requirement that it be Exchange 2 k and not 03 (which some people discover too late...)?

  I have to do such a facility in a few days and do not want unnecessary traps. For example, the box of the unit is in its own domain or it coexist peacefully as a member server in a domain that already includes Exchange servers? What ADSchemaSetup.exe in VM environments?

  Pointers would be appreciated. (4.0 (4) Setup guide for cisco unity does not even contains the phrase "voice mail only"!)

  see the page of the guide broader installation here:

  http://www.Cisco.com/en/us/products/SW/voicesw/ps2237/prod_installation_guides_list.html

  4.0 installation (5) guides are divided into Unified Messaging installs with Exchange or Domino and tipping or not tipping. There also two guides for the installation of voice mail (meaning voice mail only installation) with Exchange 2000-one for failover and one for not.

  It must contain all of the details for things you need. There is also the guide "system requirements and hardware supported and software" for 4.x here:

  http://www.Cisco.com/en/us/products/SW/voicesw/ps2237/prod_system_requirements_hardware09186a0080117617.html

  There is a section in there for voice mail only requirements (this is where he mentions Exchange 2000 only).

• Phone number mask external unit Voice Mail Port

  I have 10 outbound ports vm reserved for message notification. In CallManager for all 10 voice port configurations, I have the mask of external number set to a specific number (without jokers). When the unit carries out the call-out the callerid shows like the phone number of billing for the outgoing PRI. This tells me that the CO does not see the callerid correctly based on their tables, so he replaces it with the billing number. I checked the number I am using in the mask is in their paintings, and the PRI sends correct callerid on all other calls. Only the voice mail ports callerid is incorrect. Did I miss something somewhere that should be set? The real DN on ports of voicemail is a private internal number that is also specified on the vm in UTIM ports.

  Thank you!!!

  Adam

  Is it possible to check the box to mask external telephone number of the party of the call on the use of the model of local railway of 7 digits to see if that solved the problem?

  Brandon

• Voice mail integration with AD unit

  I knew the integartion with AD unit is possible in the installation of unified communication, but I saw a schnerio where I will have the unit with voice mail only and want to integrate AD that is installed on another server.

  Also is there any befefit for this?

  Essentially, you always install the vm unit only if the installation guide still applies. The difference is that you do not have dcpromo.exe to make unity a domain controller. Look at the installation guide-

  Installation of Active Directory or by adding the Cisco Unity server to an existing domain

  Existing domain

  http://www.Cisco.com/en/us/products/SW/voicesw/ps2237/products_installation_guide_chapter09186a00804455cc.html#wp1874289

• BlackBerry Smartphones Voice Mail password

  You want to add the voicemail password.  How do you do that?  I read to go to the phone icon, then voice mail icon.  Could not find either.  Have VZW 8130

  I found this one on my own.  The icon on the phone's call log icon.  Open the call log.  Open the menu, and then click options.  In the line options is the voicemail.  Click on the voicemail and must be the voicemail phone number. There is another line for the password.  Insert the password.  Save and close.  When you dial the voice mail, hold 1, pauses for 3 seconds and insert the password.

• Smartphones blackBerry delayed Voice Mail Alerts BlackBerry Storm 9550

  For about a month I received Voice Mail alert hours, days, or sometimes not at all (and find that several messages rates graft in VM). I don't know if it's a matter of BlackBerry, or if I need to contact Verizon Wireless.

  It seems to happen when I'm using the email or online, and I have no idea that there is an incoming call (often more important than what I do).  Yesterday, I received a call at 8:30 and got a new warning at 14:20 it was a call from important business.  This happened several times lately.  What I need to change a setting on my camera, or...?  I've had the phone for almost two years, and it is a relatively new problem.

  Hello and welcome to the community!

  Whatever the root cause of the problem, your only formal channel for support is done by VZW. They are responsible for all of your formal support and will degenerate case RIM if they can't solve it.

  But VM services are all part of your telephone services; they are not related to your services at the level of the BB. To contact the Association would remain the appropriate path. However, as a customer of the previous Association, I can attest that too often VM notifications go all wobbly with them.

  Good luck!

• BlackBerry Smartphones Voice mail alert tone?

  Is there a way to set my voicemail to a certain tone and if so, how can I do it?

  Thank you

  You hear the tone of voice mail notification?

  No, it is a type of notification SMS message sent by your operator, and it will always be what's on your SMS.

• BlackBerry Smartphones Voice Mail notify tone

  How do you define a choose a specific ringtone for voicemail?

  RKL

  By setting your SMS tone in profiles.

  Your SMS notification tone is identical to your tone of voice mail notification.

  Do you need help, your edition profiles?

• BlackBerry Smartphones how do I set up voice mail for the first time?

  I'm going to lose my mind.  I think not (even in the manual) for simple instructions on how to set up voicemail for my husband on the BB 8800.  There are all sorts of questions and answers on the voicemail, but I just need to know how to set up for the first time.  The message you get when you call the phone is "this user has not yet established by voice mail" (or something to that effect).

  Help, please!

  It's simple in Act! Go to the call log -> click on Menu , then select Options -> voice mail. In the access number put your carriers voicemail mailbox number. Some carrier requires your password which you can also put in the.

  Let know if it helps.

• New HP Officejet 7610. You do not have voice mail or fax, just hang on to my computer, how can I?

  I am trying to install and to set up my new HP Officejet 7610 full-size all-in-one.   I have a 21.5 "new Imac I want to hang up.   I'm not planning to use fax or voice mail, just connect to my computer.    I use the scanner and printing of formatted text and pictures and the leaves of large pages.   I use this as a personal printer in my house.   I am connected to my Imac by ADSL via an external modem to the telephone company.   I would like to know how to plug my connections and if I still need to use a DSL filter and a parallel splitter.   What I must have the fax job or can it be turned off.    I'm not as tech savvy as I have always used a very old Mac til now, and more I'm getting too old to understand this myself.   Appreciate any help.

  Welcome to the oldrelic forums

  I read your post about wanting to set up your HP Officejet 7610 Wide Format e-all-in-one printer - H912a and do not use the fax. Do not plug the fax if you do not use. To set up the printer and install it on your Mac, I'll share some links with you below to help you with that! Regarding the printer itself, follow the on-screen instructions for you through the whole upward.

  Install / uninstall software & drivers

  Best wishes

• How to print or save a voice mail of iphone constantly 6

  Hello

  I have an i phone 6.

  Question: There is an important answering machine that I want to print (or save constantly).

  What I've done so far:

  1. my phone provider suggested I have find an app for this.

  2. online search has not been successful

  3. I have phone support told me that they cannot recommend apps and advised me to ask the help of the community.

  Any recommendations on how to print the content of a voicemail message?

  Hi jana99,

  If you need to record a voicemail visual voicemail, you can do this by using the share option. Just type and then choose where to send it. You can save it in VoiceMemo, Notes, mail, Messages or a supported 3rd party app. Take a look at the article below for more details.

  How to record voice messages on your iPhone
  https://support.Apple.com/en-us/HT205012

  Nice day

• V13 Firefox slow to access the voice mail or google google works very well in internet explore

  I just updated firefox to v13 and now its really slow to access the google mail and google voice. I get a message that it is connect to google, but nothing happens. works fine on internet explore. other web sites seem to work end

  Hello

  I use V14.0.1

  I had simliar problems both at home and at work while using Firefox. IE and chrome works very well in these two places.

  While I am at home, and not using any proxy, it worked after disbaling spdy i.e. network.http.spdy.enabled set to false.

  However, when I'm at work (by browsing through a proxy, Ironport in this case) and it does not work. I noticed that it is not only the keyword google search or google sites, but none of the https / ssl working site. He invites me repeatedly for authentication of the proxy, and even if I type my proxy username and password, it does not work.

  I have been with older versions of firefox for a while and have not had this kind of problem before.

  Any idea?

• Unified Messaging - no voice mail in Outlook

  Guys,

  I'm running a problem with implementing to the UCC 8.5 UM in an Exchange 2010 environment. All tests show good, calendar is accessible via the desktop... phone but no voice messages is issued to exhange.

  Anyone have any ideas? It there any specifice or newspaper I do I look?

  I don't use the viewmail, and the version of Outlook 2010

  Gareth

  We have 8.6 with Exchange 2010 if Im not 100%, this will help, but try this:

  First steps are basics - check the SMTP configuration is located in Control Panel > SMTP Configuration > server

  Than go to Unified Messaging Services > select your option - (I used UnifiedMessaging)

  1. check that the type is defined (we used default Exchange/BPOS-D)

  2. check that the active box is checked

  3. set a display name (UnifiedMessaging is ours)

  4 web-Based Authentication (we use NTLM)

  5 web-Based Protocol (we use HTTPS) (we validate CERT for Exchange)

  We use research that we have specified manually

  This is where it gets bad - you use a balancer in front of your table of CASES (of course if you have a table) - we used the DNS for the VIP entry on our F5 and set the type of server to Exchange 2007/2010 Client Access server.

  Check that your username is configured with the right policies and access in Exchange (there are limitation strategies to be applied in trade).

  Then the most important measure - Message for email - relaying the Message

  In the model of the user, you must make sure that the SMTP company is filled with the correct information for SMTP

  If all this is good, that opens RTMT 8.91.  So that opens

  Go to Cisco Unity Connection intended

  You will need to select the server

  That the check marks to be applied to the Message Tracking only Inbox tracks & Traces

  some tests of noting the time trials and pass it to RTMT and pull the tracks. You should be able to examine the log files to remove the traces (in the trace and the alert) and go at the time to see what is (or is not the case)

  You can also take newspapers by the SAE 2010 to check if there is any problem with the account to access the appropriate throttling policy.  My bet is that it is the SMTP corporate value since you indicate that the tests are passed. However, we have seen that if Exchange is not running the latest rollups in SP2 or higher he resets the connections to the policy by default and only impact on connections and could have repercussions on.  However, it seems akin to SMTP if messages arrive in the local mail store.

  Hope this helps

  Jeff

  First go to tools > task management

  There are traces of macro that you can configure

  Run it