voice regonnition on my car

Similar Questions

• I have SE phone BT and WiFi problems

  2 questions

  Voice of BT in car quality is terrible with the phone SE - not like that on old 6s I sold to buy this phone.

  Just noticed that the WIFI icon has disappeared!  Despite the detection network WIFI with excellent signal strength and network selected checked the actual signal is not there - it is always in the upper left corner of any I phone that I had previousdly not there now!  I think that it is connected OK as connection is faster than the 3G or 4 G-

  Someone at - it an idea of what is the problem and how to sort for BT and WIFI?

  Please do the following and after each test to see if the problem is resolved - if yes, then you can omit the following steps - I tried to list them in ascending order of the effort at least on a Mac and / or an iDevice

  1. Check if the problem is related to a single device and if other devices connect normally-
  2. If the answer 1 is 'yes' - try to connect the device assigned to somewhere else if possible - coffee or the University
  3. Perform a forced - restart cela do not delete or purge all data and allows to solve many problems - here is how - press and hold the Off / On Home button and at the same time for about 15-20 seconds, until the Apple logo appears. Allow normal startup upward.
  4. Settings - WiFi - < network name > - Click on forget network - do a restart forced according to 3 and then add again the network
  5. If home - reboot the router by unplugging it for 60 seconds (power) and the plug and reconnect - obviously, this step can be done in a public place like a cafe or airport or University. While you're there - make sure your router is working on the latest firmware (check manufacturer's website)
  6. Settings - general - reset - Reset network settings - remember to have very practical WiFi passwords because it erases the WiFi passwords
  7. If it is a new specific net device in your home - make sure that the router gives enough DNS for all numbers which must / wants a connection - stuff like the printer, Chromecast get overlooked - ask for more details on this so not sure option
  8. Backup the device to iTunes - restore as NEW (no) - see if solves problem - if yes - restore backup
  9. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

  For Bluetooth

  1. If the pencil of Apple is connected - "Forget it" and try again
  2. Control Center - tap bluetooth and turn it on again - 8 - 10 times
  3. Force restart the iPhone
  4. Update to the latest iOS if not done

• Bluetooth music stuttering - IOS 9.3.1 Iphone 6

  This problem is with my Toyota 4 2016 runner via bluetooth only. Note that I can play with success of music via bluetooth with other devices, wireless speaker, etc.

  This occurs intermittently when you play pandora, spotify or other radio applications, is the music stutters and jumps. The only way to fix it is to disconnect the bluetooth of my phone and reconnect, then it works. The Bluetooth worked very well in the car with the music apps in the last update of IOS. What I did to try to fix the problem:

  1. Do you have a factory reset and backup of the phone and IOS.
  2. The radio did a hard reset of the bluetooth for the phone connection, sense had the car audio system forget the device and find him. I did this several times before and after the #1 above.
  3. Did a hard reset of the phone several times, before and after the #1 above.

  Phone calls and voice commands of the car work fine. It is limited to music via bluetooth applications only. Any thoughts on what is the problem?

  The same goes for Ford Focus 3

• BlackBerry Z10 Bluetooth streaming audio question

  Since 10.3.1 on my Telus Z10 stl3

  When I first upgraded to 10.3.1 all associated BT seemed to work pretty well except for the phone should continue to play the song after I turned off the sync from Ford and opened the door. Normally he stopped at this stage.

  Then a week later I can not the audio out of the car system. BT connect, the phone works, I can launch the audio player via the voice command of the car, the song and I can jump forward and back with the buttons on the wheel, but not sound. It is as if the volume down (which is not)

  I have re-paired on the phone a couple of times, I did a boot cold on the phone with a hot couple starts.

  Any suggestions?

  Thank you.

  So, the solution was to use a link BB/preferences/charging device software. NOT FACTORY RESET, which is a security wipe.

  It is a soft brick, it wiped everything and reloaded the OS current carrier.

  Everything is good.

  I add still held apps of BBworld a little at a time to see if one of these were the reason messed Bluetooth.

• transfer music 5S for car bluetooth iPhone call voice not

  Recently, I updated to ios 9.2 and my display is changed. After connecting to my i20, connection is successful, the song is transfer, while the connect call appears in the screen of the car but no sound in the car. The side of the car's ok, checked with other iphone. ' ' No audio call, the music is ok "Please help.

  Hi shiju522,

  Thank you for using communities Support from Apple!

  I understand that your iPhone while connected to your vehicle, is not working as expected for voice calls, but it's for the music. I know that situations like this can be frustrating, but we have some good information for situations like these that should be useful.

  To begin the troubleshooting process, there are two different articles that I'd read over and working through.

  Configure and use third-party Bluetooth - Apple Support Accessories

  Get help to connect your iPhone, iPad or iPod touch with your car radio - Apple Support

  Best!

• Care of Gmail to google voice in the safe to put on my computer

  I want to have a second line.  Is it safe to put Google Voice Gmail plugin on my pc?  I was going to use it with a helmet attached to the audio jacks / microphone headphone jack on the front.

  Thank you very much!

  Shawn

  Hi Shawn,

  You can install the plug-in to Google voice.

  See the following links.
  Installing the voice and video chat plugin

  http://support.Google.com/chat/bin/answer.py?hl=en&answer=161993

  On a computer voice and video chat

  https://support.Google.com/chat/bin/answer.py?hl=en-GB&answer=159499

  Third party warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  I hope that the above information is useful!

• CarPlay audio quality of the voice when it is connected through the USB port is poor vs Bluetooth on Pioneer AVH-4200NEX

  Hello!

  I recently installed a Pioneer AVH-4200NEX unit, I was super excited to improve my car with the support of CarPlay, and everything works great except for one thing.  When I connect my iPhone (6s +) to the unit via a USB cable and a standard phone call, the audio quality is very bad - hail, very downsampled, and metallic sounding compared to the use of Bluetooth via the unit to pioneer for the same phone call (I'm on LTE, using HD voice, although the quality difference is quite noticeable on the calls not HD and on the 4 G calls).  I looked for an answer to this question, but the best that I can find mention of limited USB bandwidth and try to juggle than the bandwidth for the rest of the CarPlay experience, although I don't buy not because audio via the iPhone connected with USB playback is just as clear that it is through Bluetooth.  So my question is: How can I submit a bug report Apple about this behavior and (b) do you have other CarPlay users also be known this recent problem on a unit of Pioneer NEX (AppRadio included)?  It would be great if this is a bug of Pioneer for which they can release a firmware update, I'm just worried that it is a codec problem specified by the CarPlay, so non repairable.

  Thank you!

  -Seth

  Hello served,

  Thank you for using communities of Apple Support.

  I understand that when you use the USB cable for your iPhone in your car with the audio CarPlay is mediocre. I know how it is important for you to hear your calls clearly. In a situation like this, I recommend the steps described in the following article to help solve the problem.

  Configure CarPlay to use with your iPhone

  Specifically the section to get help:

  Get help

  If CarPlay does not work as you expect, here's what you can check. After each step, try to use CarPlay again.

  1. Make sure that Siri is turned on.
  2. Restart your iPhone and your car. Depending on your car, you can see the CarPlay home screen when you turn it on. If you do not, look for the CarPlay logo on the screen of your car.
  3. If possible, connect your iPhone to a different USB port in your car.
  4. Try a different lightning to a USB cable. Make sure that the cable is certified.
  5. Update to the latest version of iOS.
  6. Check the manual using your car. You may need to install updates of firmware for your stereo.

  See you soon

• Is it possible to change the voice in the maps app?

  The voice in the maps app is boring, that I just want to be able to change it.

  Hi joegadney,

  Thank you for using communities Support from Apple.

  The voice you hear on your navigation Maps is also the voice you have selected for Siri.  You can change it by following the directions below:

  Change the language or the voice of Siri

  To change the voice of Siri, go to settings > general > Siri > voice between the sexes. To change the language of Siri, go to settings > general > Siri > language. Then choose from the list of languages that understands and speaks of Siri.

  You can use Siri in any country, with the supported languages. Siri is designed to recognize the accents and dialects of the supported country, Siri accuracy rate will be higher for natives. Learn who has Siri is supported in what countries.

  Use Siri on your iPhone, iPad or iPod touch

  Take care.

• problems with update iOS 9.3 car bluetooth

  problems with update iOS 9.3 car bluetooth. break and cannot hear the caller voice calls.

  In what seems to be the same problem, this AM. iPhone 6, iOS 9.3, its stock of 2012 Honda Odyssey system. Worked well with iOS 9.1. With iOS 9.2 bluetooth would be occasionally disconnect, then reconnect about 5-10 seconds later. Reset all the settings bluetooth both phone and car with no improvement.

  IOS installed 9.3 last night. Phone connects, but the audio is unintelligible. Sound cut about every quarter of second, then reductions for about a quarter of a second, ad nauseam. Reset the phone without effect. Will try other things later today, but the phone is unusable with bluetooth, as is.

• Voice modem on Satellite A100-787 PSAANE-02Q01LAR

  I tried to install a software of voicemail as an answering machine for a telephone line but noticed that my computer does not support this function.

  If the hardware is missing or it is possible that the software on the modem is not installed correctly?

  The driver is installed is now called: Toshiba software modem.
  What is the function of driver and what is the way to solve this problem?

  I use WinXp SP3 on this computer.

  > Hardware is missing or it is possible that the software on the modem is not installed correctly?

  The lack of material?
  Didn't check you the voice mail program specifications and the hardware requirements in order to use this software

  To be honest I ve no experience using this software, but I guess that all software provides a list of the hardware requirements. Check with the developer software, or maybe you can see some details on the package

  Fact is that this laptop [SATELLITE A100-787 | http://www.toshiba.eu/discontinued-products/satellite-a100-787/] takes care of international modem V.90 (V.92 ready) supporting speed: 56 Kbps to 14.4 Kbps fax and data (V.90)

• HP slate 7 voice tab, kitkat upgrade failed

  Hello

  my hp voice Slate 7 tab could not be upgraded to kitkal and crashed and sometimes I turn on the system.

  Now the tab has no BONES. Plese help out me my tab is brand new, age 1 month.

  Can I customer to contact Hp care? I'm not good in the technical stuff.

  Please help me

  Name of the company	Address	Service email ID	Service phone no.
  Jabil Global Services India Pvt Ltd.	Arcade Mudra, MIG 27, 1st floor, Nrupatunga Road, Kuvempunagar, Mysore	SRFR. Mysore @groups.iqor.com	91 7899760099

• do not record voices

  I can record voice via the built-in microphone, but not through my Scarlette 2i4 with a condenser MXL 3000 mic. I use this configuration on a regular basis for a few years and recorded several songs recently and everything was fine. Then the other day it didn't work anymore.

  I have preferences inside the Gargeband on Scarlett for entry and exit

  I have a lead of real instruments with active record

  Phantom power of Scarlett's gain is in place and I can see this mic signal to the Scarlett

  I hear the MXL 3000 in my headphones are plugged the Scarlett.

  I tried a different microphone, no change.

  I tried to stop everything, re-corner connections, don't reboot, no change.

  I tried the channels 1 and 2 on the Scarlett, no change.

  I tried several song files and new empty files.

  Note: There is no drivers for the Scarlett - it runs in compatible mode on Mac

  I'm puzzled. Any ideas? Thank you very much, really frustrated and can not save!

  Have you checked the settings of the Audio configuration utility and Midi?  Sometimes, the format is set to a frequency cap is not taken care of in GarageBand - there should be 44100 Hz. And check the volume sliders.

  

• Motorcycle strange voice response...

  Earlier this evening, I tried to find my car in a parking lot and the r-phrase so I launched with my launch, 'Hey, Moto X, find my car. He showed a little x with a bunch of dots swirling around and said: ' Hey, long time no see "on the screen and played this weird sound.has of beep any that seen elsewhere?

  Yes I have seen that before, the thing is that the Activation of voice motorcycle has a "find my phone" feature that you activated. I just tested it on my phone and when I said "find my car" it was actually the "find my phone" feature that includes the exact things you mentioned in your comments.

  Here's a youtube video talking about service:

• iOS 9.2 and Bluetooth in car

  Last update of lla messed up my Bluetooth in my car.

  Music on phone turned on by itself and if I have the voice text, radio does not save as before.

  I have the same problem. Listening to the radio I use Siri via Bluetooth in my GMC Sierre and when in fact the radio does not refer to the music. It shows the Bluetooth from my iphone 6 s and my iPhone displays AirPlay with my GMC.

• Motorcycle help talk-back via bluetooth from car No.

  I noticed that whenever I am connected to my car bluetooth, motorcycle support never answers when I ask a question, such as "what is the temperature outside? Instead, the only thing heard by the speakers of the car is "Google opening". When I look at my phone, I see he did capture my question, but he never answers. When I disconnect Bluetooth in the car, bike Assist works as expected.

  A that someone has already experienced this problem? My car is a Subaru Forester of 2014. Anyone know how I can fix this problem? Thank you

  I tested my voice to bike and I think I can have "solved" my problem. Usually, when I drive, I say my launch line "OK Moto X. I wait for its "DING" and then say my order. Via bluetooth, the phone would say 'Opening Google' and then nothing would happen. Today I told my launch phrase, but did not wait for his "DING" say a command. Instead, I waited my phone to wake up to display one of listening views, such as 'Yes?' or ' what's up? Later, I said an order that the sound "DING" occurred and the phone says 'Opening Google'. Then, I saw that my order was captured and executed.

  Initially, I was going to say that when it is connected on his "DING" bluetooth always comes after the order, but I found that is incompatible. In other words, you can trust if the sound "DING" means that if the phone is listening or finished listening. Instead, you can assume that after you say the break expression of launch for a second, and then say your command. But, how can we really know if your expression of launch has been heard. The course only when I know by the display shows among the displays look. It's sad, but it's still hands-free, you have to look at your phone. My plans are to purchase a mount, so I can look at my phone to see if he drew my launch phrase.

  If you want to remove "Google opening" response from the phone, you can add a tasker application to solve this 'problem' if it's a problem for you. In the meantime, I will mark this discussion as resolved. Thanks to those followed on this issue.