void / buttons vi of the single of structure event during the first round.

Similar Questions

• My AS3 buttons only work the first time

  I set up my buttons so that are each a movieclip with 'plus' and 'out' States/frame labels. They exist in the main timeline. Their control actionscript code is located in a frame on the main timeline and the holding frame that actionscript is about even in the main scenario where the buttons are introduced. I use actionscript 3.

  The buttons have been implemented so that they navigate to another image in the main scenario and on this frame are a film. The dimensions of the movie are smaller than the main stage so that the buttons are still accessible when each video is played.

  The problem is that my buttons work only once - by that I mean they go to the correct place when you click on the first time, but when they are clicked they still sail elsewhere.

  Totally doing my head in trying to find a solution and if someone can help and show me what I'm doing wrong, what would be really useful. Here is the code I used for the buttons...

  Stop();

  
  function mainBtnOver(event:MouseEvent):void {}
  event.target.gotoAndPlay ("over");
  }
  /////////
  function mainBtnOut(event:MouseEvent):void {}
  event.target.gotoAndPlay ("out");
  }

  CLICK INDIVIDUAL BUTTON FUNCTIONS
  function mainBtn1Down(event:MouseEvent):void {}
  gotoAndPlay ("01Movie");
  }
  function mainBtn2Down(event:MouseEvent):void {}
  gotoAndPlay ("02Movie");
  }
  function mainBtn3Down(event:MouseEvent):void {}
  gotoAndPlay ("03Movie");
  }
  function mainBtn4Down(event:MouseEvent):void {}
  gotoAndPlay ("04Movie");
  }
  function mainBtn5Down(event:MouseEvent):void {}
  gotoAndPlay ("05Movie");
  }

  
  Button 1 listeners
  mainBtn1.addEventListener (MouseEvent.ROLL_OVER, mainBtnOver);
  mainBtn1.addEventListener (MouseEvent.ROLL_OUT, mainBtnOut);
  mainBtn1.addEventListener (MouseEvent.CLICK, mainBtn1Down);
  2 button headphones
  mainBtn2.addEventListener (MouseEvent.ROLL_OVER, mainBtnOver);
  mainBtn2.addEventListener (MouseEvent.ROLL_OUT, mainBtnOut);
  mainBtn2.addEventListener (MouseEvent.CLICK, mainBtn2Down);
  Button 3 listeners
  mainBtn3.addEventListener (MouseEvent.ROLL_OVER, mainBtnOver);
  mainBtn3.addEventListener (MouseEvent.ROLL_OUT, mainBtnOut);
  mainBtn3.addEventListener (MouseEvent.CLICK, mainBtn3Down);
  Button 4 listeners
  mainBtn4.addEventListener (MouseEvent.ROLL_OVER, mainBtnOver);
  mainBtn4.addEventListener (MouseEvent.ROLL_OUT, mainBtnOut);
  mainBtn4.addEventListener (MouseEvent.CLICK, mainBtn4Down);
  Key 5 listeners
  mainBtn5.addEventListener (MouseEvent.ROLL_OVER, mainBtnOver);
  mainBtn5.addEventListener (MouseEvent.ROLL_OUT, mainBtnOut);
  mainBtn5.addEventListener (MouseEvent.CLICK, mainBtn5Down);

  I'm sure it's doing me something very stupid - I am very new to AS3. Any help much appreciated.

  Thank you :-)

  If the image labels, you have video clips that have the content of your presentation, you must use gotoAndStop ("frameLabel") instead of gotoAndPlay ("frameLabel"). There is no need to play the main scenario, when you go to and present one of these clips. I don't know if that's your problem, but... Using your code, I had no problem.

  In addition, you can configure your animated buttons in a way that eliminates the need to have your ROLL_OVER and ROLL_OUT event. It is not necessarily better, but just another method. Although I could use other ways to animate a button, I don't want to reduce the code to use the buttons in an interface and use only the CLICK in the majority of cases.

  

• two names of different buttons, changes after the first press

  Is it possible to change the display of a Boolean button? When the VI is started, the button reads "START". Each successive push would read "ACCEPT."

  With the property node.

  

  Jean-Marc

• Form the "submit" button similar to the first Page

  I'm trying to understand how the Send button.

  I'm moving on from my days of Frontpage.  There, I created a form with a button send at the bottom. I could right click on the button submit, where I've isolated a .txt file to a folder on the server called "_private".  The Send button would only add the info from the completed form at the bottom of the text file, which, being in the _private folder, could not access by password.

  All tutorials Dreamweaver I can find show how to make the shape (which seems simple enough), but none explain how to set up the submit button (which I do not want sent by e-mail) or where the info is presented or stored or accessible.

  Any help would be greatly appreciated!

  Kevin Gerow

  How forms work in a few words:

  (1) html forms collect data.

  (2) sometimes the client script (JavaScript/jQuery) are used to validate the form fields & make sure that all required fields are filled correctly.   It is not 100% reliable, however, that spammers robots do not use JavaScript.

  (3) PHP or another script server-side more guarantees the required fields are filled in (in the case of that JavaScript is disabled) and data are sanitized to prevent the pirates & spam bots to exploit your forms.  Then, data are processed by your server and sent to a destination specified in the script - that is to say, your e-mail address or folder / database on your server.   Finally, the user receives a success message telling them that the form was sent.

  For the end user, this seems very simple - as well it should.  But there are a lot of things behind the scenes.  If your server supports PHP & the function mail (), I wrote a tutorial part 3 contact form below.

  ALT-Web Design & Publishing: sensitive Contact form with 3.2 Bootstrap and PHP (part 1)

  Nancy O.

• Simulation of phone call throws the null pointer exception in the first round

  I am trying to simulate a telephone call, but he throws null pointer exception in the first race after that the Simulator is launched. It works very well in subsequent executions. This is the scenario in single line and multi mode. I was able to test this on a camera right now.

  Can anyone guide me as to why this exception occurs? And how to solve?

  The code I used is:

  Single line

  PhoneArguments

  Call = new PhoneArguments(PhoneArguments.ARG_CALL, )

   

  Phone_Number);

   

  Invoke.invokeApplication (Invoke.

   

  APP_TYPE_PHONE

  Call);

   

   

   

  MultiLine:

   

   

  Phone.initiateCall (Phone.getLineIds () [0], Phone_Number)

   

   

   

  Thank you

   

   

  This null pointer exception will not come to the real device...

  According to my knowledge, you call another application so that the user must press the back button to return to your application.

• blank resource visa info during the first round

  Hi all

  I am trying to run the pilot of 6100 fluke on a fluke remote 6100.  When I run the initialization of the remote device, I always get the following error message:

  VISA: (Hex 0xBFFF000E) the given reference of session or the object is not valid.

  I followed the problem and saw that the visa being passed resource name contains no valid information (see below).  That is not sensible, since when I select the name of the resource from the drop-down list, the program has clearly recognized the remote device.  Why the program allow the user to select the resource of visa but won't visa valid for driver information?

  This error occur only during the first inning.  If the user run the program again, the error disappears.  Can anyone help?  Thank you!

  Yik

  When the program is run for the first time, visa name contains valid information:

  General

  The resource name of the canonical VISA = blank

  Visa refnum = white

  Session ID = 0

  I/O timeout = 0

  Type = 0 INTF

  Value = empty

  Stop? = True

  Condition

  session valid? Fake

  Instr is? = False

  Stop? True

  AHA!

  You select the resource from the drop-down list BEFORE the start of the loop?  An SR might help

• Play button melted to the first image

  Please see attached the FLA in CS3, I did.  Everything is ready except one thing

  -J' I'm trying to figure out how when the user clicks the play button in the lower right button, it will disappear from the current slide to slide

  #1 then begin playback from the timeline.
  
  For example, when someone looks at it and decides to click on the buttons of the controller on the bottom right - suppose you click #2.  He stops on slide 2.  then you click on play - I want that it will fade to #2 à #1 then play.  Ditto for the other 3 buttons.

  Any ideas?

  You are welcome

• Disabling a button "submit" after the first click on a custom page

  Hi guys,.
  
  I have a requirement where I need to add a button "submit" ("email") to a custom page, once the button is clicked to send a notification by email, it should be disabled for the next time that the user not send the email for the second time.
  Adding a button is OK, turn it off
  
  Pls help me if anyone has ideas/thoughts.
  Appreciate your help.
  
  
  Thanks in advance,
  Suman

  Hello

  Your condition can not be filled with blockoneverySubmit API because it would block if it is between the transaction once the event is over, you can click on it again. Better at the event click redirect it to the same page and make this option off or use PPR (better solution).

  Kind regards
  Out Sharma

• [Solved] [Ubuntu] Player Modules compilation fails during the first round

  Environment:

  Ubuntu Server 15.04

  VMware-Player - 7.1.0 - 2496824.x86_64.bundle

  
  

  Hello

  The update of the kernel module fails to build vmnet:

  2015 05-08 T 11: 55:17.757 + 02:00 | vthread-4 | I120: Extract successfully the vmnet source.

  2015 05-08 T 11: 55:17.757 + 02:00 | vthread-4 | I120: Module construction with the command ' / usr/bin/make - j8 - C/tmp/modconfig-Hx4jdX/vmnet-only-automatic generation HEADER_DIR=/lib/modules/3.19.0-16-generic/build/include CC = / usr/bin/gcc IS_GCC_3 = no ".

  2015 05-08 T 11: 55:18.894 + 02:00 | vthread-4 | W110: Vmnet failed.  Cannot run the command build.

  
  

  No more description of the error is available in the newspaper which is attached below.

  
  

  Any suggestion?
  

  Reader 7.10 and Workstation 11.10 are incompatible with the kernel linux 3.19.

  The solution is documented here.

  Successfully, I applied the patch on /usr/lib/vmware/modules/source/vmnet.tar on Ubuntu Server 15.04.

• What iOS device was the first without a physical back button?

  Which device (ios) was the first without a physical back button?

  The first device iOS, iPhone, launched in 2007.

• Value of the indicator updated after the 2nd round

  Hello

  I have this vi statistic that calculates the various things. One of the indicators is updating its value only in the second inning and not in the first round, I'm puzzled as to why it happens. I tried to use the flat sequence, but it still does the same thing.

  Any ideas?

  Thank you

  simply_me wrote:

  Hello

  I use the local variable just to avoid spending the son anywhere in the block diagram. I'll clean the block diagram.

  BAD IDEA!  Use threads.  Reading this thread.

  If that is the question, how is flat sequence did not work when I tried it (just out of curiosity)?

  I need to see your code with sequence structure flat instead of knowledge.  I guess, you don't have the structure of sequence positioned the way you thought you did.

  Thank you

• Change the first column seen in the datagrid by code?

  Hello

  Is anyway to change the first column in a DataGrid using action script? I mean, for example, think I have 10 columns, only 3 are seen (0,1,2). I just want to have a button to change the first column view. Thus, for example, if I press it, 1.2, and third column will be those that is displayed in the datagrid control. I need to emulate the same thing that the scroll bar when you drag in a datagrid, but instead of letting the scroll bar does that automatically, I want to "scroll" datagrid manually.

  Moreover, is anyway through datagrid children and hide the scrollbar manually?

  Thanks in advance,

  Aron.

  horizontalScrollPolicy

• My compiled program crashes after the first run (LabVIEW 2009)

  I have a compiled program created with LabVIEW 2009 which, in the first round, once the computer is restarted, works fine but after discontinuation of the program, it will not work properly.

  The program uses a compiled Launcher to dynamically activate a set of VI containing the expectation driven by State Machines (QDSM).  Begins subsequent program launcher module appears fine, and his progress bar shows that she starts each of the VI.  Once the Launcher is complete it removes memory launched Dynamics VI and caressed.  The spear that do not reach the main UI that VI is barely long enough for the observer to see (if there is one) then stops.  The program then went from memory I can say.  There is no process in memory or anything.

  Also, when I try to run the installed version of the exe file on a computer with installed 2009 development environment I get this behavior consistently successful launch once again.

  In both case, my program does raise all errors (that are connected), or runtime generates everything I can see.  Also, when I run my program in the development environment the program does that way.  He has no problem at all.

  I have used this style of architecture front of LV8.6 with all the problems.  Can anyone suggest some possible solutions or even a few debugging tips?  I've never had a problem that I could not duplicate in the development environment, so I'm not sure how to start to attack my question.

  Thanks for any help.

  Jason

  

  I solved the problem I think that (at least with regard to the tests on this point revealed).   After that I added the possibility to connect the past States to of the QDSM, I was able to determine that the program was 'plant' after that I dynamically closed the Panel front of the Launcher.  My program is designed to close the Panel before the pitcher, then pop up the façade of the main user interface.   My EXE is inspired to hold the Launcher with my other files QDSM kept outdoors in specific directories.  What seemed to be happening is that when Launcher closed its façade and before UI opening upward the runtime engine decide since it is y no Windows Open he was closing down.  It's my guess on what might happen any way.  I modified my code to change the Launcher window to hidden and delay for 1/2 second to give a chance to fully start running to the main user interface.  This will correct the problem, or at least worked around her.  If someone out there can explain me exactly what is happening that I sure would appreciate it.

  Thanks for all the help that those of you who responded.  Your advice has been very beneficial and certainly led me to a faster resolution.

  Jason

• Why is my Panel tabs or by default in the third tab, instead of the first, loading my page?

  I have a widget panel tabs on the home page of our Web site and it is essential that the public sees content on the first tab when the page loads.

  Subsequently, they can click on the other tabs to view the content. I tried to use "Arrange" "put on the map' by clicking on the object in the layout and also physically dragging the items in the layers of panels [i.e. to rearrange the order of the layers], however the opinion of the Committee keeps coming back to the third panel, which is the first in my list of layers. When I try to do this slide to the bottom of my layers for the composition of the first round table moves physically in the layout at the third round table.

  The idea is to have one appears downstairs, "Data Center..", ALWAYS showing on top and the one currently present on the top, "Engineering &..", ALWAYS on the bottom. As I said before, physically rearrange the order of layers is not working either.

  

  The tab that is open when you publish is the tab that will be open by default.

• Single button to save the contents of several TEB CP7

  I have a slide with nine TEBs on it. I would like a user can enter their responses in each TEB and click on a single submit button to update the associated variables.

  Can someone tell me how to do this, because the minute each individual TEB has its own button "submit"?

  The project will be published using the release of HTML5.

  Thank you very much.

  The characters being typed in BER are immediately written to the variable associated with ETB.  By clicking on the button submit, this is not what updates the variable. It is updated in real time.

  By clicking on the button "submit" ETB is usually either validate the text entered, otherwise the execution of an action to go directly to another place.

  When you have several TEBs you can disable their individual Submit buttons and just have a normal button on the slide that performs a conditional Action to validate the values of each TEB via decision blocks in conditional action.  If this allows you to validate several TEBS containing a simple conditional action.  There are still some types of validation that cannot perform conditional actions (for example allow UPPERCASE, or allow lowercase letters, etc.) and, if necessary, so you can be better to use the validation options that came with 6.1, but have only been debugged once you have to 7.0.1.