void / Panel VI cannot be loaded correctly when main vi is converted to exe

Hi all, I have a main vi that uses sup Panel to call one another only vi during the operation. The code works well at level vi. However, when I converted the main vi in exe file, this Panel of sup cannot properly load only one vi.

Manifest error"Application built or Shared Library (DLL): ensure that all loaded screws dynamically were correctly included in the specification for the application or a shared library build.  LabVIEW Real-time: screw built into executables are not accessible via VI Server calls. ' Use the Source Distributions dynamically call screws on real-time targets.

Here is how it is used in the Panel of sup, could you tell me how I can change the path to the building to do this job in exe file? Thank you very much!

The path-specific problems are usually caused by this: http://digital.ni.com/public.nsf/allkb/FD7DE8BC8FFC256C862565F4006BE363

With respect to the construction, you must explicitly add dynamic screws to the list of source files. These must be in the list "Still included" in the tab "Source Files". Please see the documentation for the App Builder for details and additional information.

Tags: NI Software

Similar Questions

  • My Qosmio cannot be loaded correctly

    Hello

    I'm of the France.

    Block sees the PC for an hour and after that its cargo stops I have to wait a few hours reuse

    It is impossible to reach Toshiba support. Online tools that do not work.

    How can I contact the french support because my PC is covered by the warranty

    Thank you

    It is not easy to say what the problem is here, and if the laptop is still under warranty best option for you is to contact the nearest Toshiba service provider and ask for help.
    Please visit http://www.toshiba.eu/innovation/generic/ASP_SUPPORT/

    There you can find the addresses and telephone numbers of all Toshiba ASP in your country.

  • "No valid source or target channels specified. Cannot run. "error when you try to convert to digital channel waveform

    I'm trying to convert a waveform channel in one digital channel and a channel of absolute time, but I get the "no valid source or target channels specified. Error cannot run. ».

    I'm trying to concatenate several files TDMS InsightCM so I can display the data in a continuous flow over time. If the first file loaded (one of the channels in the group "Signals") convert the same channel, it works fine, but when I try to do the same thing with any of the channels from the second file (one of the channels in the group "Waveforms1"), I get the error.

    Hi JEBalles,

    I was able to reproduce this behavior when I chose a digital channel as my channels to convert. In this case, it looks like you run the operation on the speed profile > Mod1-Ch0 A NL, which is a digital channel.

    Could you try to select a waveform another channel? It looks like [3] Mod1-Ch0 A NL is a waveform channel.

    Kind regards

  • Vista user profile Service service has no logon. User profile cannot be loaded.

    When we turn on our laptop on Vista we get a message "the service user profile Service has no logon.  User profile cannot be loaded. "When you click on 'OK', we are given a screen with the user profile on the computer.  It is never an option to log on with a different profile or as a guest.  It is never an option to start in safe mode.  It is therefore impossible to check records or attempt any other difficulty.  The computer is stuck in a circle without end.

    Hello

    These methods should help for Windows 7 or Vista.

    References to Vista also apply to Windows 7.

    You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
    Mode has no default password (unless someone has changed the password so it should be available).

    Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
    has been known to cause this problem.

    Error message when you log on a Windows Vista-based or Windows 7 using computer a
    Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
    http://support.Microsoft.com/kb/947215

    How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
    http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    How to fix error "your user profile was not loaded correctly! You have been connected with a
    temporary profile. "in Vista
    http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

    BE VERY CAREFUL IF YOU USE THIS ONE:

    DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

    -------------------------------------------------------------------------------------------------------------------------------------

    For Windows 7:

    How to enable or disable the built-in Windows 7 Administrator account
    http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

    Use the Admin account hidden to lower your user account APPLY / OK then wear again to
    ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
    above message.

    You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
    password (or two with the same password) use a test or difficulty to another.

    You can run the command Admin account hidden from the prompt here if
    necessary.

    How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
    http://www.SevenForums.com/tutorials/668-system-recovery-options.html

    What are the system recovery options in Windows 7?
    http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

    How to create a Windows 7 system repair disc
    http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

    -------------------------------------------------------------------------------------------------------------------------------------

    For Vista:

    How to enable or disable the real built-in Administrator account in Vista
    http://www.Vistax64.com/tutorials/67567-administrator-account.html

    Use the Admin account hidden to lower your user account APPLY / OK then wear again to
    ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
    above message.

    You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
    password (or two with the same password) use a test or difficulty to another.

    You can run the command Admin account hidden from the prompt here if
    necessary.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    What are the system recovery options in Windows Vista?
    http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

    How to create a Vista - free methods recovery disk
    http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

    -------------------------------------------------------------------------------------------------------------------------------------

    If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
    always leave to an Admin who is not used except for testing and difficulty account).

    Difficulty of a corrupted user profile
    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • The user profile Service service failed to connect. User profile cannot be loaded

    I go through the motions of an administrator account and everything seems to work but when I try to use it the first time I get a message error "the service user profile Service could not connect. User profile cannot be loaded. When I look, there is no user under users profile. Some error logs says "access denied." How to operate?

    Hello

    ·         You have made no changes to the computer until the problem occurred?

    I suggest you follow the steps in the link below to solve the problem you are experiencing.

    http://support.Microsoft.com/kb/947215

  • When I try to log in to my admin user, a screen appears and says ' the user profile service has no logon. User profile cannot be loaded. »

    original title:

    When I try to log in to my admin user, a screen appears and says ' the user profile service has no logon. User profile cannot be loaded. "I can't spend anything for users of our families because they ask for approval from the admin and it won't work. What can I do to correct the admin user?

    You have another admin account , you can connect?
    If so, please do it and then run the Microsoft Support tutorial below.

    If you don't have another admin account, go into safe mode.
    Here's how to get safe mode:
    Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and selectSafe Mode with network.

    In the window of logon in safe mode...
    1 can connect to your account administrator in safe mode?
    If so, run the Microsoft tutorial support listed below.

    2. If you can't log into your own account, you see another admin next to your account in the logon screen?
    If you do, that one is the built-in Administrator account. By default, there is no password. Opening of session and run the tutorial from Microsoft technical support below.

    3. If you are able to log on in safe mode, do a system restore. Choose a date when you were able to log in NORMAL MODE as your restore point.
    How to do system restore: System Restore tutorialtutorial from Microsoft support :
    http://support.Microsoft.com/kb/947215
    There are several methods,go through one by one.
    Method 3 has a "fix it for me" application
    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • Error when the connection that reads the user profile service service has no logon. User profile cannot be loaded

    I've worked on my computer fine all day and then went to log on to the evening and received this message. When I look on user profiles it shows my user as a 'backup '. I have a lot of documents and emails that I need. Is there a way to fix this, other than to create a new account and delete the old one?

    Hello

    The data is still there and accessible by any admin look under C:\Users account where C: is
    the drive where the profiles of users (folders).

    You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. Also the ADMINISTRATOR account of
    Safe mode has no password by default unless someone has changed.

    These problems and similar bugs can help:

    A temporary profile is loaded after you connect to a Windows Vista-based system
    http://support.Microsoft.com/kb/947242

    How to fix error "your user profile was not loaded correctly! You have been connected with a
    temporary profile. "in Vista
    http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

    Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
    has been known to cause this problem.

    How to fix error "the user profile Service has no logon. Profile of user cannot
    be responsible. »
    http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    -----------------------------------------------

    Other methods:

    Use the hidden administrator account to lower your user account (to the lowest level) APPLY/OK then go back
    and reset it to the Admin APPLY/OK - this clearly allows corruption. Do this several times. Do the same for others
    accounts that may be difficult. If necessary you can also reset your password in the accounts.
    Do not forget to leave your Admin account and the other to the desired level.

    Make another Admin account with your password and use it to fix the others if necessary. (just for
    repair, don't use regular account, not a safety valve) always keep a spare ADMIN account.

    DO NOT LEAVE THE ENABLED LSA OR USE DAILY. If it corrupts you are toast!

    How to enable or disable the real built-in Administrator account in Vista
    http://www.Vistax64.com/tutorials/67567-administrator-account.html

    You can run the Admin account hidden from the prompt by if necessary.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
    not that an Admin account that is not used except for testing and difficulty).

    Difficulty of a corrupted user profile
    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Am trying to re - install Acrobat 9 Pro (includes the Distiller) after installing a new hard drive. iMac 27 "2009, ElCapitan 11.11.6. I have the original dmg file. also have trid copying from back up. It seems to load correctly. When open ask for my pa

    Am trying to re - install Acrobat 9 Pro (includes the Distiller) after installing a new hard drive. iMac 27 "2009, ElCapitan 11.11.6. I have the original dmg file. have also tried copying from back up. Same thing is happening anyway. It seems to load correctly. When open it asks my password but not to its own serial number. It is open, but don't watch not at the full bar at the top, that the word Acrobat, and it does nothing? Worked very well before the old drive crashing. On the same operating system?

    Not compatible does not mean that it cannot work (even if sometimes this does not mean that). This means that it has never been tested and not be fixed; This often means people have seen strange and unpredictable issues.

    Acrobat makes changes to the system, it is always more vulnerable. DC Acribat is the current version. If the goal is to slow down completely, perhaps more profitable subscription activity.

  • When I click on my icon of firefox homepage says "the address is not a valid URL. The URL is not valid and cannot be loaded. How can I fix it?

    When I downloaded Mozilla Firefox and clicked on the Firefox icon I get this message on the Firefox homepage "the address is not valid.

    The URL is not valid and cannot be loaded. "I can always access the internet but what do I do to get rid of this message. The home page does not display the icon of firefox.

    You can check the setting of the homepage:

    • Tools > Options > general > startup: Homepage

    Firefox supports several home pages separated by ' |' symbol (pipe).

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

    • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
    • Do NOT click on the reset button on the startup window Mode safe
  • Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical de

    Sync to iphoto with Iphone hangs on during synchronization. In addition the google map can be charged when I click on the places of Mediathek. Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »

    Perhaps the reason for the problem of synchronization is the problem with the loading of google map?

    Error message: "this page has not loaded correctly Google Maps. See the JavaScript console for more technical details. »

    Apple has not renewed the contract with Google to access Google servers.

    If the old version of iPhoto, which are still using Google's servers for the cards and places are either crashing or hanging.  Places are only work in iPhoto 9.5.1 or newer, who use places of Apple servers.

    There is more support for iPhoto from Apple.  You must update iPhoto 9.5.1 with the Mavericks. It would work well, only it is no longer buying this update to Apple.

    Perhaps the reason for the problem of synchronization is the problem with the loading of google map?

    It is very likely.  If iPhoto work very well when you are offline, then your problems will be caused by the connection failed to Googles servers.

    See this: Bug: iPhoto 9.4 crashing when viewing the scene

  • I get this error message 'The URL is not valid and cannot be loaded' when I try to go to Firefox home. I uninstalled the modules, uninstaleed and reinstalled a new fresh firefox which did not help

    I get the following error message 'The URL is not valid and cannot be loaded' when I try to go to firefox home. I uninstalled modules, uninstalled Firefox and then install a new version. Still have the problem.
    Thanks for the help

    This problem may be caused by a corrupt installation of Visual C++ or incomplete (several versions can be installed-by-side; SxS) it lacks certain runtime components (redistributable Packages), which depends on Firefox (problem with an embedded manifest file that specifies a specific runtime version).

    You need to install the missing components (for example, Redistrbutable end 2005 ++).

    • bug 713167 - Microsoft.VC80.CRT SideBySide errors, browsercomps.dll
  • When I try to update to Firefox, I get a window saying that it cannot be loaded because I don't have all the necessary permissions. What do this mean and what do I do?

    When I try to update to Firefox, I get a window saying that it cannot be loaded because I don't have all the necessary permissions. What do this mean and what do I do?

    If he has problems with the update or the permissions then simpler is to download the full version and trash the version currently installed to do a clean install of the new version.

    Download a new copy of the Firefox program and save the file on the desktop DMG

    • Trash the present application Firefox to do a clean (re-) install
    • Install the new version you downloaded

    Your profile data is stored in the Firefox profile folder, so you will not lose your bookmarks and other personal data.

  • your user profile was not loaded correctly! you have been logged on with a temporary profile. Changes to this profile will be lost when you log out. Please, check your log of events for more information or contact your administrator

    Desperately need help.  I'm supposed to use my computer to type a HUGE Affidavit today and its buggered! Oh no.! Get started with my kids have been playing on my computer and install different games.  So I thought that I do the big thing non-technical MOM and start cleaning up the programs!  Well I accidently deleted NIVIDA and probably something else (I think) and totally messed up my computer!  I have re-uploaded NIVIDA and now my computer "looks like" back to normal, but it throws this error message

    "your user profile was not loaded correctly! you have been logged on with a temporary profile. Changes to this profile will be lost when you log out. Please, check your log of events for more information or contact your administrator"

    and now I can't save anything or find my pictures that I'm desperate for! Can someone please give me a helping hand.  Not technically minded, to take me on as a challenge!  Thanks bunch :) Sarah

    Desperately need help.  I'm supposed to use my computer to type a HUGE Affidavit today and its buggered! Oh no.! Get started with my kids have been playing on my computer and install different games.  So I thought that I do the big thing non-technical MOM and start cleaning up the programs!  Well I accidently deleted NIVIDA and probably something else (I think) and totally messed up my computer!  I have re-uploaded NIVIDA and now my computer "looks like" back to normal, but it throws this error message

    "your user profile was not loaded correctly! you have been logged on with a temporary profile. Changes to this profile will be lost when you log out. Please, check your log of events for more information or contact your administrator"

    and now I can't save anything or find my pictures that I'm desperate for! Can someone please give me a helping hand.  Not technically minded, to take me on as a challenge!  Thanks bunch :) Sarah

    Here is the tutorial to solve this problem. It is very involving. Please read the step by step.
    http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

    t-4-2

  • When I try to turn on my PC it reads windows not load correctly

    When I try to turn on my PC it reads windows did not load correctly.  Go ahead and load up but it will do several times before of icons appear on the desktop.  When I try to go to the internet and the fact many times.  Sometimes it can show dupping 100 files.  Do I need another computer or if I can do something that will help stop this?

    Original title: hard to load PC

    Hello

    Perform the steps from the link below and see if it helps.

    What to do if Windows does not start correctly

    Hope this information helps.

  • Error message "User profile Service is a not the user of the connection profile cannot be loaded" when you try to connect using the Administrator profile

    Original title: cannot use my administrator profile

    When loging on my laptop, I get this error when I click on my profile administrator "user profile Service is not the user of the connection profile cannot be loaded. This comes after the password is accepted. The only way I can connect to my computer is one of my accounts of comments. I can't change anything because I can't sign as an administrator. How can I fix? I have a Compacq laptop running Windows Vista

    Original title: cannot use my administrator profile

    When loging on my laptop, I get this error when I click on my profile administrator "user profile Service is not the user of the connection profile cannot be loaded. This comes after the password is accepted. The only way I can connect to my computer is one of my accounts of comments. I can't change anything because I can't sign as an administrator. How can I fix? I have a Compacq laptop running Windows Vista

    If you cannot connect to your admin account, no tutorials can help you because they need you to connect to an administrator account to carry out the instructions.

    See if the following can get an admin account...

    Go to Safe Mode...

    Restart your computer > immediately and repeatedly pressing the F8 key until you see a black and white screen. The top/down arrow and select Mode safe mode with networking.

    Now, while in safe mode, you perform one of the following?

    1 can connect to your account admin without the error message?
    If so, do. Then do a system restore. Choose a date when you were free to login to your account admin as your restore point.

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    If the system restore does not slove the problem, then use this tutorial

    http://support.Microsoft.com/kb/947215

    2. If you are unable to log in to your account administrator in safe mode, you see another administrator next to your account?
    If so, you are lucky. This is the built-in Administrator account.
    There is, by default, no password.
    It could connect and do the system restore.

    If the system restore is not enough, then perform the tutorial even as above:
    http://support.Microsoft.com/kb/947215

    If you can't do or of what precedes, I'm afraid you will have to re - install your Vista.

Maybe you are looking for

  • join a new existing email

    I created a new message so I could join an email I had already received. I'm not finding such a function in the logic (for me anyway) of places to check: join tools command, right-click on existing position to attach to new mail from command. Thank y

  • What card WiFi for Equium A100-549

    As a bit of a novice I need some advice from people more experienced than me!I am currently using the router broadband wireless G Linksys and the adapter for my wireless home connection, however, I have the adapter connected to a usb port for connect

  • M30X 129: problem of battery or power management road

    Hi all I had a lot of trouble with my laptop recently; When using just the battery I can watch it unloads and a minute, he can read about 30% or more, depending on the laptop will be beep like crazy and then go into hibernation. I put it to Hibernate

  • display volume control

    The volume works on my PC, but there is no display on the screen when I adjust the volume?

  • need graphic card

    I have Compaq SG3153IL desktop. I have install need for speed Hot Pursuit 2010 in my pc. But there is an error in video graphics card because I have no graphics card. So please tell me what graphics card hould I have to install in my pc. My budget is