Void screws and writing custom

Similar Questions

• dv7 6000 memory can't remove has no screws and do not want to damage and custom slide off

  Hey, I bought a new dv7 6000 but hard disk/memory cache cannot be delete does no screws and don't want to damage and wont get any ideas, the manual says screw but it is y not here... new model?

  What is this type of coverage?

  http://support.HP.com/us-en/document/c02062583

• simultaneous reading and writing files TDMS

  A customer had a program written in 8.6; the programmer is no longer available and I'm looking to debug intermittent problems.

  N - channels of data is acquired and streamed to a PDM file. The operator can select a channel to view data in real time, but the display is one scope table displaying 15 seconds worth of data and when switching of channels the program "returns" display with the last 15 seconds of a data value of the new string (barrier data extracted from the TDMS file).

  What I notice here, aside from using sloppy cluster error, is that both references are open in the file - one for writing data and the other for recovery data. Is this a good practice? is it necessary or one reference supports the reading and writing? Is this a possible source of problems?

  

  thanx

  lmd2

  You can do the same thing with a single file reference.

  The issue of not being able to see the data that was written after the reading of reference has been opened is known for having refnums to open in two different processes, but not in the same executable or VI.

  Herbert

• I have reset Firefox and now I've lost the Favorites and the custom toolbar.

  I can't restore my custom toolbar. Got back bookmarks by following the instructions found. I can not understand how to restore the toolbar... I go to the "Troubleshooting" information and I click on the "view files", but the only 'local' in my opinion, is not dated before I reset Firefox and I do not understand ' click on Firefox and while it repairs... etc. ". I am pretty good at following instructions, but these baffle me. Help, please!

  I haven't seen that pop up...

  If you want to try to roll back the clock I can describe a procedure to do this. In short, it would be to create a new folder of parameters (a new Firefox profile), deletion of the contents of this folder and copy the contents of your old data from Firefox on the desktop file.

  Does not take long, if you are interested, but then you have to troubleshoot why the old profile was slow. Here's how:

  Resucitating your profile before reset

  (1) create a new Firefox profile:

  Close Firefox and starts in the Profile Manager, as described in this article:

  Use the Profile Manager to create and delete profiles Firefox

  Any time want spending profiles, close Firefox and come back to this dialog box. When you create a new profile, I recommend that you use the suggested default location, not to delete all profiles without first making backups. For quick reference, name the 12 profile so you can easily recognize.

  (2) when you start in the new profile, it is almost empty. Open the profile folder using

  Help > troubleshooting information > "view file" button.

  The bar of Windows Explorer should show a name combining random characters with 12.

  (3) keep this folder open, exit Firefox. Allow a few moments for Firefox complete update of the files in the profile folder. Then delete the contents of the folder new profile. This will leave you with a profile folder 12 vacuum.

  (4) in a separate window, open the folder of old data from Firefox on your desktop. Copy all the data of this file in the profile folder 12 vacuum.

  (5) run Firefox. It is expected to launch in which looks exactly like your discount to zero prior configuration.

  Now on troubleshooting. If Firefox feels slow, I suggest starting with Safe Mode. It is a standard diagnostic tool in order to avoid interference by extensions (and some custom settings). More info: questions to troubleshoot Firefox in Safe Mode.

  You can restart Firefox in Mode safe help

  Help > restart with disabled modules

  In the dialog box, click on 'Start mode safe' (not Reset)

  Any difference?

• RDXV60KB - photo and writing are RED

  Just bought 3 RDXV60KB recorder 1 to replace the old model, but when I put it to the top of the photo and writing were RED.
  Check all the wires, they seem to be in appropriate places, but can't seem to find what is wrong

  Originally posted by Danimar
  

  Just bought 3 RDXV60KB recorder 1 to replace the old model, but when I put it to the top of the photo and writing were RED.
  Check all the wires, they seem to be in appropriate places, but can't seem to find what is wrong

  Sorry, but would you please explain more precisely what you mean by: "but when I put it to the top of the image and writing were RED"...? ! ?

• Need help for reading in parallel on the same interface and writing XNET

  Hello. I need help to configure CAN interface to write and read from the same interface.

  I use NI PXI-8513/2. I use CAN1 as interface.

  My had TO send status messages CAN every 100ms. I have to read in order to return akntoowlege to keep DUT CAN interface happy and not make mistakes.

  So, I want to open Strim Session and readall frames in the loop. At the same time, I need to be able to write in a frame HAD at the time...

  I only need to read one picture at a time too, but since I know the ID, I can pull it from the stream.

  What I'm confusing all is how to put in place the same CAN1 interface to be able to write and read in parallel.

  I think I would get errors that interface is already in use.

  Since I'm new to CAN, I was read and write only when necessary. But, sometimes I was getting errors on my messages. Sometimes I get message, sometimes miss me. But, when I run CAN test criminal as sniffer he sends and written every time. I was told it's because it recognizes all messages.

  I opened to suggestions of how best to implement the interface.

  I guess I can use CAN2 and separator to work around this problem, but I would use an interface if possible.

  Thank you

  Hi Rus,

  The XNET hadrware takes care of most of the low level of detials for you. The reading and writing of the circuits are both connected to the bus at any time. When you write to the hardware it will try to put a frame on the bus at the first opportunity he can. If the frame loses arbitration material re - will attempt to send the frame up is successful. Reception equipment monitor activity on the bus, regardless of what it conveys. The material received will usually throw a framework that was sent by communication equipment, but there is an Echo property pass to circumvent this behavior too.

  Take a look at the example of the expedition: MAY-> NI - XNET-> Sessions-> multiple Sessions Intro-> CAN even exit entry framework Port unique Point.vi. Keep in mind that this example you will need to use a second CAN interface to recognize frames, it transmits. I would recoment against the example CAN output Frame Single Point which would mimic your ECU if you choose a type of cyclic frame running this example.

• VI Analyzer "a few screws and/or essays have been added or removed from your file system because you have saved changed this configuration file."

  When I run VI analyzer and open our standard configuration file, the message "some screws and/or essays have been added or removed from your file since changed record system this file of configuration." appears. By clicking OK, choose something to analyze and move to the VI Analyzer - select the Tests, the selection of testing control dialog box is completely empty and the Analyze button is grayed out.

  I'm runing LabVIEW 2013 on Windows 7, VI Analyzer worked before and I tried repairing and uninstalling the LabVIEW program (then reinstalling) already. If I do not select a config file or try to reset all the test configurations, control of the Tests remains empty.

  Is it possible to restore the tests or difficulty just the VI Analyzer toolkit?

  The only thing I remember to change since I ran last parser is that I installed the tiara.

  Most likely someone accidentally moved the test record THROUGH by accident

  VIA installs like a Toolbox and would not repair with just a LabVIEW installation

  You could re - install Media Developer Suite if you have that in the opposite case:

  Or the other

  Change > getting started window or

  Tools > find a LabVIEW Addons

  will launch the search VIPM tool

  Search for VI Analyzer

  Download and install

• Void screw connecting renamed main VI

  Hello

  I added a prefix for the names of all the screws and controls in my project.

  After renaming when I try to open the main VI, he couldn't find the sub screws so I'm browsing screw manually.

  I have over 200 screws. so, is there a way to sectarian handle this?

  
  

• simultaneous reading and writing on a PDM file

  I found similar discussions on here, but none that satisfied my problem. I'm running several loops within a vi, which writes data in a permanently .tdms file. Another loop to finish its task from the start in a test, and I want to transition this loop so that it accesses the file writing and started writing on a network. It also enables me to check that the data is being stored in the file and that it is corrupt.

  I started with just the basics, but when I pass the second loop to read the file that is is always written off mistakes, saying that she met at the end of the file. It does if I put the count 1, -1 or anything in between. It illuminates, however, the end of the file output.

  I have the entry in the file tdms on PDM read wired to a local variable, just as I do writing PDM, they all have both read the same thing and I get an iterations of a data value of the reading, so, apparently, file access is no problem. And I have to someone who cringed to local variables, ensure that reading and writing are not activated until the local variable is updated.

  Try to set the "group name" entry on «TDMS read» If you write more than one group, you can use "View the contents of the DDHN" in order to get a list of groups.

  Herbert

• How to start my subscription abroad with the foreign language and writing unknown?

  How to start my subscription abroad with the foreign language and writing unknown?

  These can also be useful:

  FAQ: Is creative cloud available in my country?

  FAQ: Why my purchase showing the wrong currency?

  FAQ: How can I view Adobe web pages in another language?

  FAQ: How can I change the country associated with my Adobe ID?

  FAQ: How can I change the language that appears in my creative cloud app?

• Remove Help Menu and toolbar Custome from Excel

  I uninstalled Creative Suite 5 and longer version 4 stand alone products. I ran the creative cloud cleaner. But I still have the Help Menu command and the custom toolbar in Excel visible on the add-ins tab. I'm puzzled. I can't understand how to remove them. They are inactive, is no longer functional due to Contribute is uninstalled. Someone has an idea? Thank you.

  them.

  

  Next, you need to remove Excel and install it again.

  Kind regards

  Rajeev.

• FM 11 and SharePoint - custom columns support?

  We are using FM10, DITA-FMX, and SharePoint 2010 and DITA topics.

  We have created a "topic" in SharePoint column, fill us with the type of subject (concept, task, reference) when you check in a DITA document.

  In CMS FM10 connector, advanced search, this column is not available for searching. IN FM11, it seems that maybe (http://help.adobe.com/en_US/framemaker/using/WS92ce23f8a8bab2f3-289f19b113749faafac-8000.h tml), but I'm not completely sure.

  If we improve for FM11, will we be able to find the Type of subject and other custom fields in the advanced search of CMS connector?

  Solved. You must use the literal name of the column. This is not necessarily the same as the name in "Column (click to edit)" in the library settings page.

  To find the literal name, click on the apparent name (as if to edit the column) and then refer to the URL in the address bar of browser for the value of the field. In my case it read "field = TopicTitle", without the space.

  NOTE: The error I mentioned is generated by SharePoint. See for example e-not-installed-properly-go-to-the-list-settings-page-to-delete-these-fields/ http://hazaa.com.au/2012/06/26/microsoft-sharepoint-spexception-one-or-more-field-types-ar

• difference between Instant and complete customer oracle

  Everyone,
  
  I had read a PDF of goldengate lines below. Someone please explain to me what is the difference between Instant and complete customer oracle?
  
  What is the purpose of the XDK libraries. ?
  
  "The full Oracle client must be used with the GoldenGate so GoldenGate programs"
  have access to the Oracle XDK libraries. Do not use the Oracle Instant Client, who has not
  These libraries. You can download the full client from Oracle's Web site. »
  
  Kind regards
  Santini

  The dealio is the following:

  When you install the client software, you have several options as to the degree of what you get/install. The big chicken dinner is administrator, so you get all sorts of additional features, modules, libraries, utilities, etc. Candy hard end of Christmas is instantaneous, and has just enough features for, as you can guess now, connect a customer and that's about it. Several libraries have the feature in what that extra is needed. An example is FAN, or fast application notification, used the shift in Data Guard. A FAN API (Java) detects a failover and redirect a new client connection to the primary. GG use XDK for (in particular) is not important to a user, just the fact that it is available to connect to Oracle.

• Reading and writing Excel File

  Hi all. I need your help. I need to know how to read EXCEL FILE and insert it into a table of some. Also, can someone tell me how to write in an EXCEL FILE?
  
  Thank you in advance.

  READING EXCEL
  There are several options how read file - ODBC, excel on a fly--> conversion to CSV excel (if you have 11.2 and you want to use tables external preprocessor),... I put (I think all) of the options on my BLOG http://jiri.wordpress.com/2010/01/04/load-ms-excel-file-to-oracle-database/

  WRITING IN EXCEL
  Writing in excel is delicate because there is no direct way of Oracle, here are a few tips

  1 JAVA - you can create java stored procedure, I did not test this, but it's probably doable http://www.java-tips.org/other-api-tips/jexcel/how-to-create-an-excel-file.html

  2. XML Excel format - you can use UTL_FILE and writing to XML Excel can read http://blogs.msdn.com/b/brian_jones/archive/2005/06/27/433152.aspx

  3 Excel also reads the CSV files, but it's file plan text without formatting. You can use UTL_FILE to easily create a CSV (comma-delimited) file and read from excel, I have some examples on my blog http://jiri.wordpress.com/2009/03/18/oracle-fast-parallel-data-unload-into-ascii-files/

• Define and raise custom events

  I am designing and building a library of reusable Cast that can be included in a variety of other Director projects. This library will provide an interface to joint Code readers barcode that appear as a keyboard on the computer and also provides interfaces for interacting with external software.
  
  My problem is finding how to set and trigger custom of this Cast library events. Currently I set him up in a Global Script within the library. However, all it seems I can do the script is call a predefined function that implemented the film container. He can't really have several event listeners.
  
  There are two events that I am trying to define and raise:
  1. the notification when a label barcode is scanned
  2. the notification when a server database search ends
  
  The typical application flow is that a film's Director parent will sit idle waiting for a TagScan event mode is triggered. After the TagScan event, a request is sent to a central server to retrieve the associated information in the barcode that has been analyzed. Because we don't want UI suspended pending data to return, there was an another event notification when data are available for use.
  
  So my question is really in two parts:
  1. is my approach to the use of a global script in an external library to Cast the best way to put in place a reusable module?
  2. is there a way to define and trigger custom since a global script events?
  
  Thanks in advance,
  Shawn.

  1. the best way to create reusable code is to use behaviors and parent scripts. Some 98% of your code should be one of these two types - not movie scripts.

  2. by "global script" I assume you mean a set of functions in a movie script. If so, then it is not a good approach.

  Here is the skeleton of how I would approach. A system of events at its basic level is nothing more reminders with an object that queries the status set up other objects. A reminder is when an object passes a reference on behalf of one of its names of Manager to another object. This allows the second object to make a call to the first object. When he made that call, belongs to the second object.

  What you need is an object that monitors stocks asynchronous data recovery and drive barcode from the server. Create a Parent script with the following code.

  -Barcode monitor

  property pEvents - list of events and the saved objects that is called when an event occurs.
  property pTimeOb - timeout object used for the periodic polling/verification of the status of various asynchronous actions.

  the new me
  pEvents = [#BarcodeScanned: [], #DataReady: []]
  pTimeOb = timeout () .new ("BarcodeMonitor", 200, #CheckAsyncStatus, me)-means "200" we check five times per second.
  return to me
  new end

  on addEventListener, CallbackObject, CallbackHandler, event - script instance, symbol, symbol
  -can add validation of argument here.

  CallBackInfo = [#CallbackObject:CallbackObject, #CallbackHandler:CallbackHandler]
  pEvents [Event] .add (CallBackInfo)
  end addEventListener

  on me, removeEventListener CallbackObject, CallbackHandler, event - script instance, symbol, symbol
  -code that walks the list and deletes all corresponding combinations object and handler for the specified event.
  end removeEventListener

  on CheckAsyncStatus me, Timeob
  -check the status of various asynchronous barcode things happening.

  -Callback sample
  -At this point, some data is ready and has been recovered
  Data = "everything data".
  EventCallBacks = pEvents.DataReady
  Repeat with CallBackInfo in EventCallBacks
  call (CallBackInfo.CallbackHandler, CallBackInfo.CallbackObject, data)
  end repeat
  end CheckAsyncStatus
  ----------------------------------------------------------------------

  The above code sets up a mechanism for registering callbacks with the subject "bar code monitor" and uses a timeout object to periodically check the State of the asynchronous actions.

  Now any object who wishes to be notified of an event fits simply by using the addEventListener method. Or let's say that we want our object of global struggle to listen to the returned data. The next Parent script would be created things.

  -control

  global gBarCodeMonitor

  the new me
  gBarCodeMonitor.addEventListener (I, #processData, #DataReady)
  return to me
  new end

  processData me, given
  -do something with the data
  end processData
  -------------------------------------------------------------------------

  You then create your objects in preparemovie.

  global gBarCodeMonitor
  global gControl

  on prepareMovie
  -installation Global Singletons

  If gBarCodeMonitor.voidP then
  gBarCodeMonitor = script ("Monitor Bar Code") .new)
  end if

  If gControl.voidP then
  gControl = script("Control").new)
  end if
  end prepareMovie
  ---------------------------------------------------------------------

  With this configuration, you can have several objects to register for an event and a unique object with several events.

  If you are not familiar with the scripts of Parent. So take the time to learn. The programming of your life will become much easier the day you're going to OOP.

  I have not test the code, so there may be a typo or something. But the basic idea is there.