void / vi based on the Boolean value

Similar Questions

• How to determine the Boolean value selected in a mouse down event pane?

  I have a lot of Boolean controls and indicators in my VI and I would determine what boolean is selected (left click) on a mouse down event pane.  Can I do this without having to specify each of the Boolean in the case of event configuration?

  Thank you.

  Jim

  If you get a ref to your Boolean all they have properties that define it location and size. Compare the location click with the limits of each boolean and where

  Left< click=""><>

  AND

  Back to top< click=""><>

  you have found the Boolean value that ended the click.

  It may be easier to use the Boolean refs table to create a dynamic event and then use the ref returned by the mouse down to get the label of the Boolean value that has been clicked.

  Have fun

  Ben

• How the Boolean value off the coast in the system bell auto College after 5 seconds?

  How the Boolean value off the coast in the system bell auto College after 5 seconds?... and also the Bell has to ring only the days... Please help me

  basically take the time, times of beginning and end, including the days of the weeks...

• based on the prompt value see the FDF anayasis

  Hello
  
  I have a situation like this
  I use obiee 11g
  
  Based on the prompt value in him would like to show 3 different analayses.
  I mean that if the value of guest in the page has as abc data it should show the anlaysis1
  If the prompt value data as def it should show the anlaysis2
  If the prompt value data as the IGS, it should show the anlaysis3
  If the prompt value data as jkl it should show the anlaysis3
  
  Why 3 diff analysis is because I have my list 2 columns in each anayaiss and they are 3 different tables.
  
  One more thing
  
  Obiee do we have a show and a return value for a radiobutton/drop-down list. As show us abc how invites and returns 1. is possible?
  
  Thank you
  
  Published by: user123 on July 12, 2011 12:29

  You can have n number of reports, simply use the union all in the dash prompt sql results and this will give you the choice to select any report you want.

• How to find the bpel instance in 11 g based on the index values

  We have 10 GB BPEL processes where we define the 4 index values for all instances. Whenever the support request comes, ask us the values of index and based on what we're looking for the process instance.
  
  We have now migrated bpel 10g and 11g process. How to find the bpel instance in 11 g based on the index values?

  You can go there. http://soasphere.blogspot.com/2011/04/how-to-Serch-composites-for-index.html. Do a join on the cube_instance and ci_indexes tables.

• How to turn on the flat Structure of sequence based on a Boolean value?

  Hello

  I try to write a (attached) VI who enjoy an analog voltage that crosses one analog multiplexer. I am using a flat sequence structure to change the output of select signals to change the channel to be sampled. I wonder if I can turn on the structure when my Boolean input of the sample is TRUE?

  Based on the image (I can't watch the VI himself), he doesn't seem to be a necessity for the sequence at all. There is data connections Wizard DAQ to two scalar indicators, which implies that you are taking a single sample. No need to acquire multiple samples and throw all but one. The second sequence is certainly unnecessary.

• How to pass the Boolean values of a façade in other block?

  Hi all

  I have a main façade with several Boolean button for example:

  N1-dncc-01

  N1-dncc-02

  N1-dncc-03

  -

  -

  -etc. And for each option, I event structure that calls the other program of labview in subgroup of experts.

  So now that my problem is when I pressed the button dncc-n1-01 its Boolean values should be passed to the program which I am calling the Sub-group of experts.

  So, it is possible? I tried with ref and property of node, but I failed. I guess that I am not on the correct path.

  Thanks in advance

  Pals

  
  

• the Boolean value 'specify by the expression' in the call of the sequence

  Hello

  Is it possible to set the checkbox "Specify by the expression" in a statement?

  The statement should be in the cleanup.

  If Yes, what is the line of code to write? because this variable is not

  the window variable so I have no idea on how to fix this Boolean value.

  Thank you

  An expression similar to the following should work:

  "" "RunState.Sequence.Main ["myseqcall"]." Module.AsSequenceCallModule.SpecifyByExpr = true

  -Doug

• Change the text displayed, based on the threshold value

  Hi users of Labview,.

  I need help with display and editing text in labview.

  The text should display and change according to the following conditions:

  0 volt - "no power".

  1 volt - "controller ON".

  2 Volt - "Rotor Running"

  3 volt - "Rotor stopped".

  Based on the voltage read by the channel, the text must be displayed and modified on the same area of the front panel. For example, initially it will be 0 Volt and the text "No power" should appear as an indicator of text (and not as a warning message). He needs to change ' controller we ' when the chages of voltage from 0 to 1 volt. The canal reads the analog input voltage (range 0 - 5V).

  I'm relatively new to labview. So please give me pointers or from suggestions on how can be done. Any help is greatly appreciated.

  Thank you

  REDA

  Hello

  Thanks for the crossrulz of notes, have not used the front threshold.  For this simple example, it is "symmetrical", but I can see how the values in the table have been does not correspond to the index position that is so true useful.  Learn something every day, I could not resist, wanted to try.

  OK, here's a sample VI that puts a custom message based on the crossing of a threshold.  Home work is to study the components before asking to :-)

  The dice are the analog signal of 0 to 6.   He rounded to the whole number to provide the index number.  Power is the index number in the index table, the table being hard-coded text messages.

  Two additional indicators may be deleted, useful to see what is happening.

  And get rid of the value 0 if you want the text to match the number, he he he

  Enjoy.

  

• ListView, title change to header based on the stored value.

  Hello

  I'm new to native development, always trying to get a hang of how things are done in QML. I was wondering how it was possible to format the header in the ListView based on the value of the header. For example, the datamodel is sorted by name and status. Status is stored as an integer 0,1,2,3,4,5 in the database. Whenever the ListView displays the headers, I want to show the actual title of the State (for example in progress, completed) instead of display 0 or 1.

  Thank you for your help.

  If... else if... else must have worked well, please send your code.

• Increment sequence based on the existence value

  Hello
  
  I have a requirement,
  I need the value sequence based on the values exist in the database.
  Let me explain with an example of a column, I have values such as 1,2,3,4,5,6,7,8,10,12,14, etc...
  
  Here I have to generate the value of the sequence 9,11,13 follows...
  
  
  Logically it please suggest me... I try with While loop I could not reach again.
  
  We want to help you.
  
  Concerning
  Rambeau

   select  level missing_values
     from  dual
     connect by level <= (select max(your_column) from your_table)
  minus
   select  your_column
     from  your_table
  /
  

  For example:

  with t as (
             select level n from dual connect by level < 9 union all
             select 10 from dual union all
             select 12 from dual union all
             select 14 from dual
            )
  -- end of on-the-fly data sample
   select  level missing_values
     from  dual
     connect by level <= (select max(n) from t)
  minus
   select  *
     from  t
  /
  
  MISSING_VALUES
  --------------
               9
              11
              13
  
  SQL> 
  

  SY.

• Conditional display in the text box based on the calculated value

  Hello

  I have radio buttons that each have a numerical value. For example = 1 A = 2 C = 0. In the example below, the total is equal to 5.
  

  The sum is displayed at the bottom of the document and is passed to another text box:

  

  Instead of '5' displayed in the text box on the right, it should display a "Control" Word like this:
  

  The displayed word is based on the totals through this range:

  1-2 = 'absorbing '.

  3-4 = 'practitioner '.

  5 to 6 = "control".

  The script I used to pass the value from the left to the right text box in the chart above is:

  name of the field to text box;

  var cTextBox = 'Cabinet Talent strategy knowledge - total';

  get the value of the field with the name in cTextBox;

  var sTextBox = this.getField ("cTextBox") .value;

  Set the value of this field;

  Event.Value = sTextBox;

  That I need to add to this script to show one of the words, such as "control" above?

  I am a complete novice to scripting. I found the above script online and somehow got it to work.

  I thank very much for any help or pointers, you can provide.

  Best regards

  Chris

  Sorry, there were some errors in the code that I provided above. Try this:

  If (sTextBox > = 1 & sTextBox)<= 2)="">

  Event.Value = "absorbing";

  } ElseIf (sTextBox > = 3 & sTextBox)<= 4)="">

  Event.Value = "practitioner";

  } ElseIf (sTextBox > = 5 & sTextBox)<= 6)="">

  Event.Value = "master";

  } else {}

  Event.Value = "";

  }

  If it still does not respond, you can send me the file at [email protected] and I'll check...

• Make visible subform based on the dropdown value

  I use this script successfully.

  Form1. #subform [0]. typeOfIncidentDdl::change - (JavaScript, client)
  assocInfoSubform.presence = 'hidden ';
  custInfoSubform.presence = 'hidden ';

  If (xfa.event.newText == "associate injuries") {}

  assocInfoSubform.presence = "visible";

  
  } else {}
  custInfoSubform.presence = "visible";
  
  }

  But I would like to know how can I use numeric values in the object palette instead. For a drop-down list in the object > tab link, I click on the checkbox 'specify item values', where the values are, by default, the numbers, and the text is something I've specified in the tab field under "Items in the list." What is the syntax for the use of these numerical values instead of text? Here's what I tried without success.

  If xfa.resolvNode(form1.#subform[0].typeOfIncidentDdl).value = "1"; {
  [fields become visible and required with error messages]

  
  } else {}
  [fields are hidden and not required]
  }

  And this:

  var oSubform = xfa.resolveNode("form1.#subform[0].typeOfIncidentDdl.Value");
  If (oSubform = 1); {

  etc.

  And this:

  var oSubform = xfa.resolveNode("form1.#subform[0].typeOfIncidentDdl.rawValue");
  If (oSubform = 1); {

  etc.

  I need to be close, but I don't quite have the correct syntax. Thank you for pointing me in the right direction.

  Hello

  Good man Jono, I cracked switch statements based on his examples

  I suspect that this is part of the reverse lookup that explained Paul.

  My understanding (now):

  • xfa.event.newText is the new value, but it is not yet fully committed to the value of the drop-down list.
  • With the help of this.boundItem (xfa.event.newText); you use this newly modified (but not yet posted) value and it controls against known display items.
  • The switch statement then uses this display element, rather than the uncommitted newText.

  I still think I have uses the event exit and rawValue, but "if it ain't broke, don't fix it!"

  Good luck

  Niall

• Popup is not refreshing based on the current value of the row in a table

  Hi all
  
  1.I have created an entity object View for the Table Emp
  
  2. then I created an editable view object based on the EMP table
  
  3. create a Page like jspx
  
  4 drag and drop the View object as read-only Table in this homepage
  
  5 drag and drop the view even object as in this homepage
  
  6 goto the shape and dressing with Popup
  
  7. then create a dialog inside the pop-up window
  
  8. then, go to the Table and then surround with a collection of panels
  
  9. create a button in the toolbar of the collection Panel name it as edit
  
  10. drag and drop the showpopupbehaviour the button change
  
  When I run the application. It displays all records in the emp table. If I'm in line 6. It shows the values of line 6 in the pop-up window, but if I moved to the next line which is the 7th and then press the button to change is to always show the 6th place of the values only.how to display the values in the pop-up window based on the cursor line .pls guide me in this.
  
  Thanks in advance
  C.Karukkuvel

  Hello

  Make sure you use contentDelivery = "lazyUncached" in the context menu

  Gabriel

• Passing DB values to the text based on the Select Value box

  Hello
  
  I'm very big thing back to the Oracle APEX. In my project, I have a requirement in which I need to pass different values for the corresponding text boxes on a different page based on the value I select in the item "Select Value".
  
  I tried using processes calling for demand, but could not get the desired result.
  
  Please suggest!

  Hello

  Can you repeat your scenario on apex.oracle.com? It will be easier to fix it this way.

  Kind regards