Volume goes up and down during playback on Qosmio G55-Q802 MP3

I just bought a new laptop from Toshiba with Vista Home premium.

When I'm playinh of MP3 files, the volume goes up and down.

When there is a soft part in the song the volume increases and when instruments of start to play more strong volume goes down.

Can anyone help me please with this problem?

Hello

First of all, it would be really interesting to know which laptop model you have

In addition, I would like to know if you have tested the MP3 files using different actors

Have you noticed the same sound problem using WinAmp or another free software?

Check it!

Tags: Toshiba

Similar Questions

  • Why my volume goes up and down during playback of music on YouTube?

    I listened to a few songs on YouTube channel & the volume goes up and down by itself.  How can I stop this? My computer is Lenovo & its pretty new, nothing wrong with it.  Are there other buttons that I miss?  Do not use to be like this, please help?  I want to just listen to my music without having irritated by this problem :(

    Hello

    1 did you do changes on the computer before the show?
    2. not this problem only occurs when you play music on YouTube?
    3. what browser you use to access YouTube?

    Method 1:
    You can update the latest version of the flash player and check:
    http://get.Adobe.com/flashplayer/

    Method 2:
    You can open Internet Explorer, preferably to a page that needs to play sounds.
    a. click on the volume icon in the windows system tray (in the lower right corner of the taskbar) and then click on the link titled "Mixer".
    (b) a panel will open showing the levels of individual volume of applications running that play sounds (you may need to scroll right to see all of them).
    c. ensure that belonging to Internet Explorer volume level is set correctly.
     
    Method 3:
    If the problem persists you can perform the clean boot, this problem may occur if a third-party program, the origin of the problem. Placing the computer in a place clean start State and resolve the problem. You can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/kb/929135
    Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the Knowledge Base article.

    Method 4:
    Alternatively, you can perform the steps in knowledge base article:
    The video problems with Internet Explorer
    http://support.Microsoft.com/kb/2532294

    You can also visit the links:
    http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems
    http://Windows.Microsoft.com/en-us/Windows7/adjust-the-sound-level-on-your-computer

  • I get this error every time I open LR, "Lightroom encountered and error during playback of sound preview cache and need to stop smoking" and the application does not open. He said LR would try and correct this error the next time I opened it, but the erro

    I get this error every time I open LR, "Lightroom encountered and error during playback of sound preview cache and need to stop smoking" and the application does not open. He said LR would try and correct this error the next time I opened it, but the error remains. I tried uninstalled and installed the application and the error remains. I use Windows 8.

    Manually delete the cache of the preview of your user folder.

    Mylenium

  • Premiere Pro CC (V.8.0) slow and crashes during playback

    Question:

    Premiere Pro CC (V.8.0) extremely slow and crashes during playback. My video will not play unless I make (which is not a problem). I made all my clips and try to read. It usually allow me to watch the first time around. After that, the program hangs or becomes extremely slow. I even had a blank green screen pop up on my screen. Sometimes, the program will generate the message "a serious error has occurred" and stop. Other times, the program just locks himself. I'm not under all programs except by email.

    Here is what I tried:

    Cleared all my cache files

    The value of my reading of mercury 'software only '.

    After doing the above, restarted the program and the computer.

    Don't made sure I had no RGB curves effect (as I saw it was a question of other threads)

    Remove all unused images

    Delete all files rendering and a new rendering.

    I'm editing of images requiring a Ultra key. I use a Three-Way color corrector. My video is not even 1 minute long, so I think it would be easy return and reading.

    Here's what I'm trying (I know I need an upgrade - hoped after this client project):

    MacBook Pro 2008

    Processor 2.4 GHz Intel Core 2 Duo

    Memory 4 GB 667 MHz DDR2 SDRAM

    Graphics  NVIDIA GeForce 8600M GT 256 MB

    Software  OS X 10.9.3

    Help! This is seriously slowing my workflow and my project is due tomorrow. Any advice would be appreciated.

    I am Windows but I saved some Mac links that can help

    -Next link says After Effects, but check YOUR permissions.

    -http://blogs.adobe.com/aftereffects/2014/06/permissions-mac-os-start-adobe-applications.ht ml

    -Mac 10.9.3 workaround https://forums.adobe.com/thread/1489922

    -more than Mac 10.9.3 https://forums.adobe.com/thread/1491469

    - and https://forums.adobe.com/thread/1507936

    -Activate the user Root Mac https://forums.adobe.com/thread/1156604

    -l' Root user more http://forums.adobe.com/thread/879931

    - and more user root http://forums.adobe.com/thread/940869?tstart=0

  • Windows Media Player-video stops and starts during playback

    video

    during playback of a video clip online it continuously stops and starts. I have windows media player.

    What is your internet connection. If the connection is not fast enough, it will happen.

  • Update graphics and photos during playback from the timeline

    This problem appeared all of a sudden, and I can't understand why or how to fix it. Here's the situation:

    • I have a video clip on track 1 and a graphic or a photo on track 2 (the problem occurs with any kind of graphic file or photo).
    • The graphic or photo is in its correct position when there is no activity on the timeline, but it suddenly shifts its position during playback and scrubbing.
    • Once I stop playback or rub the graphic or photo is in its place.
    • The same thing if I drag the position or the value of the scale values in the effect controls panel.
    • If I exit the chronology, the graphics in the output video are in their correct place.

    Here is a video screenshot showing what is happening: https://youtu.be/4vbrwEDsjS4

    I tried dumping the preview files, and this makes the problem go away for a few minutes. Then the same problem reappears.

    Any help with this problem would be greatly appreciated!

    -Ken M.

    I'm not at my computer editing now, but I think it's project > settings > General in the menu.  Choose the only rendering software.

  • while shooting pool on directory, use the pointer to draw the ball, that the screen goes up and down

    When I use the pointer that the screen moves up and down I want to trun off

    Hello ron crabtree,.

    This thread has been created in the Feedback forum. the Microsoft moderation team has moved this thread to the Performance and maintenance Forum.

  • Try to get a clip at a time going up and down depending on which button is clicked

    Hello

    I have a file with 5 video clips inside. I have a button that when it clicks, play each other. One of the film clips must also well up and down and I'm having a lot of trouble with that.

    Stop();

    function showVenue(Event:MouseEvent):void

    {

    mc_speaker. Play();

    }

    function showSpeaker(Event:MouseEvent):void

    {

    mc_compliance. Play();

    }

    function showCompliance(Event:MouseEvent):void

    {

    mc_strategic. Play();

    mc_data. Play();

    }

    function showStrategic(Event:MouseEvent):void

    {

    mc_data.gotoAndPlay ("Down");

    }

    function showData(Event:MouseEvent):void

    {

    mc_data.gotoAndPlay ("up");

    }

    btn_viewMore_Venue.addEventListener (MouseEvent.CLICK, showVenue);

    btn_viewMore_Speaker.addEventListener (MouseEvent.CLICK, showSpeaker);

    btn_viewMore_Complinace.addEventListener (MouseEvent.CLICK, showCompliance);

    btn_viewMore_Strategic.addEventListener (MouseEvent.CLICK, showStrategic);

    btn_viewMore_Data.addEventListener (MouseEvent.CLICK, showData);

    Y at - it to attach my file here for someone to look at anyway?

    Thank you!
    Babs

    to control the visibility of a movieclip, you can set its visible property to true/false...

    mc_data. Visible = true;  Show it

    mc_data. Visible = false;  hide it

  • Sound goes up and down in the HP Envy m6-1105dx laptop bat

    Yes, Hello.

    I just bought a hp envy m6-1105dx (windows 8) yesterday and I was put in place, I realized that the volume of the music in winamp told fort suddenly and they went there. It happens with all the songs. I downloaded the new drivers but the problem is still there. I've read about this problem in other types of laptops want to, but I don't see anything about my portable individual. Any help will be appreciated. This problem is started to irritate me.
    I hope someone can help me. Thank you.

    Yes, thanks for the help, but I found a solution that works for me, thanks to KGB999

    http://h30434.www3.HP.com/T5/notebook-PC-sound-and-audio-e-g-Windows-8/volume-swings-during-songs-with-beats-audio-enabled/m-p/2292249#M32895

    If a lot, you have problems with you audio just follow these steps:

    Follow these steps:

    (1) press on [Windows] + [X] on your keyboard and go to Device Manager

    (2) go to the sound, video and game controllers

    3) click IDT High Definition Audio CODEC

    4) click on the driver tab

    5) click put updated driver

    (6) select Browse my computer for driver software

    (7) select Let me pick from a list of device driver on my computer

    (8) select it Audio device high definition

    (9) to read the warning and click Yes if you understand the risk

    (10) restart the computer

    When your computer restarts:

    1) click on the Control of the Volume (speaker) in the bottom right of the taskbar.

    2) click on speakers

    3) click on the enhancements tab

    (4) If you do not know a lot about audio and to help prevent speakers, earphones, ear lesions, click the Equalization of the volume and click settings, and then move the slider to 3/5-4/5 in the direction of Long, then click OK and apply

    5) enjoy its AWESOME.

    BE CAREFUL, the sound of unlocked chip IDT is VERY STRONG, and based on my experience in audio engineering, I wouldn't recommend listening to it more 45% volume without the Equalization of the volume turned on.  I'm listening to a modern CD and without the limiter and compressor, 50% by volume, border level EAR ENDOMMAGEANT level on my helmet.  Also, without the pre-installed, limiter high volume CAN DAMAGE YOUR SPEAKERS.

    A little bit of my solution:

    This solution essentially replaces the IDT pilot with a Microsoft driver.  If you damage your laptop using, your warranty may does not cover repairs, so please, please, please use the limiter or prudent.  On the same note, don't damage you either; hearing loss is very difficult to self-diagnose, because you lose hearing gradually by the loss of sensitivity to higher frequencies.  It is not 'feel' special, just somehow, you notice that you stopped to hear the singing of the birds and leaves rustling a day, in order not to blow your music.

    Finally, I'll probably revisit this solution some time, as I prefer to use the IDT pilot and have my EQ work.  This is possible through the IDT folder in Program Files and hacking essentially parameter files in a text editor, but it is rather tedious and complicated.

  • I have a blue line on the left side, going up and down my screen.

    I have an iMac 21.5 inch late 2009 model and running El Capitan V. 10.11.6. My problem is that I now have a blue line that extends from the top of my screen, starting to the right of 'File' and runs all the way down. The only thing I did recently was last updated iTunes on 18 July and I updated on July 20 of the OS that was yesterday.

    The single trouble shoot I did is off my computer for a few hours. However, the line is always there. Someone at - it this experience? I have attached the Image after reboot of my iMac.

    Have you tried a system management controller - reset?

    Reset the management system (SCM) controller on your Mac - Apple Support

    This reset also covers certain aspects of the resolution of the screen:

    How to reset the NVRAM on your Mac - Apple Support

    Not sure if the symptom is indicative of the material cause; using above

    Links may be able to solve the problems, and then decide if a visit to the CENTER or

    Apple Store (engineering) for inspection would be wise.

    I hope that a reset or other aid.

    Good luck & happy computing!

  • System slows down during playback of 3 channels simultaneously

    Hi all!

    I'm at the stage of beginning with Labview (7.0, old I know ;() and try to encode a routine that reads data force 3 - axis load cell (400 Hz sampling frequency), it filters with low-pass filter simple software (cut 100 Hz) and the future written down into a data file if I use Matlab for plotting.) I met strange delay when I read the three channels at the same time and I'm trying to understand what has hurt.

    Here are the steps in my code (I used > example as a base):

    (1) I've initialized global channels, in which I put across the voltage according to the diagrams provided manufacturing

    LC is physically connected to SG23/SC-2345 combo, which, in turnes, connected to the PXI-6221 DAQ card

    (2) I've initialized a virtual channel for pxi-6221 so I can have control over its gain (+/-0 .5v, +/-1v, +/-5v, +/-10v) and the value of the gain for + / 1v, gives me the precision desired (at least I hope for that)

    (3) wired global channels to the block of PXI

    (4) set at 400 Hz sampling rate

    (5) acquisition of start-up

    (6) Split into three channels signal and connected a VI for filtering to one of them

    The thing is, once I have started the program, everything is "moving" so slow that made me wander if I do things right.

    Would be very happy comments

    My VI:

    The only thing you don't mention changing is the number of samples to be read. The VI you have posted a number of samples to read the value of 4000. If you change the sample rate of 400, then of course it will take 10 seconds to acquire as many samples.

  • What is going on??? MY screen goes up and down control when I move the cursor and extends and shrinks when I move the cursor on the screen.

    When I move the cursor to the top or the bottom of the screen literally flies upwards or downwards. When I move the cursor through the scree, it expands or shrinks.

    Try disabling hardware acceleration in Firefox.

    You may need to also a (hardware) problem with the mouse or the mouse driver.

  • Satellite P100-188: his stuttering & distortion during playback of DVD and CD

    Hello

    My laptop has developed for the second time, what I can only describe as "stuttering and distorting" during playback of dvd and cd try to burn or rip a cd does not work either.

    The first time this has happened was a few months ago and PC World did a reinstall of windows that solved the problem. It is now again.

    Any help would be much appreciated.

    and why you n t try to reinstall the OS again?
    Seems to some operating system files or registry entries are corrupted.

  • 2015.3 mac - video disappears, executives dropped during playback

    Looks like Adobe precipitated another set of applications that were not ready.  My problem is different and less severe than the others, which is why I started a new thread.

    My sequence monitor goes black occasionally and regularly during playback.  Quit and restart the application bring him temporarily.

    I also have a jerky video playback on sequences that played well in the 2015.2 version.

    Related issue: bridge CC 2015.3 crashes at startup.  Bug report page is an endless loop.  Forum messages flooded in constant crash reports on Mac and Windows.  No option in the Setup program CC to roll back to 2014 CC or CC 2015.2 CS6 does work, however.

    OSX 10.10.5 - GRAM MacPro3 32, 1 - Quadro K5000

    Kevin, I'm almost 100% certain my KPs are caused by the NVidia driver from the Web, I posted above.    I am not as convinced the CUDA latest driver is a culprit as well, but when I installed it, got a KP and immediately back to a previous version, I have not had since.

    My crash logs have NVidia in the first 10 lines, which to my knowledge, are usually the extension or the processes involved.  I don't remember see GPUSniffer on any of them, but I can keep an eye on, if it happens again.

    BTW, I've worked on Pr 2013.3 for these last two days, and the question I posted on seems to have disappeared.  No black screens and frames do not fall on the playback of the sequence.  I don't have an explanation why.

    Thank you.

    Jim

  • When opening my e-mail address, the E-mail entire table up and down for about 5 seconds. Because of the motion, I opened that badly. How to stop this movement?

    I use ASUS computer laptop and windows 7. When I opened my e-mail, the whole e-mail message table continues to move vertically for about 5 seconds and would then become immobile. Then only I can select a message and open. When I'm done with the reading of a message, and close it, it goes up and down motion again. Because of this instability, sometimes I open or delete the wrong message. What is the problem, can anyone help?

    First of all, update Firefox 16.0.1. Update Firefox to the latest version

    Then, try to read Web sites look bad or appear differently than they should and Refresh Firefox – reset settings and Add-ons. This could be just pictures of loading slowly, you have a slower internet connection with this computer?

Maybe you are looking for

  • unknown plugin

    Some plugins are marked as unknown when checking for the correct versions, do I have to remove them.

  • FireWire compatibility

    I need to know if there is a firewire which can connect to two Mac models that are 10 years apart. My iMac, bought in January 2007, has finally konked off. It lights correctly. I am able to turn it on BUT it remains in the initial start-up when the s

  • No devices and Interface in MAX

    Hi all I recently installed the evaluation version of LabVIEW and I try to communicate with a dynamometer of Mark-10 series 5. The problem, however, is that MAX doesn't detect the device or any other instrument. It's not even a tree device and Interf

  • Cannot install XP - 982311 KB, 980373, 982157, 982122, 982134, 976382, 982133, 2202122

    Former title: updates do not install__ Critical 976382 of eight updates KB982311, 980373, 982157, 982122, 982134, 982133, 2202122 keep appearing in the small icon of updates to golden color. Any of them don't install - failed. Looks like it is maybe

  • wmlp file on my Web site

    I run a website for a company, adding photos and stories. Under xp, I was able to generate the html code to go with the generated slideshow. Now I have windows 7, I find myself with a wmlp file of HTML for access. Can I do this automcatially that I u