Volume on my Aspire M3970 on HDMI AMD desktop computer is too low.

Similar Questions

• XP SP3 install problem on my presario SR1550NX with proc AMD desktop computer.

  When installing service pak 3 full and is restarting my system will go up only in safe mode, no error message that I can understand.  It lasts for quite awhile and I've tried several things without success.  Everything works well with SP2 but want to install some latest updates for some of my programs, which often need SP3.

  Here is a support article of MS

  I suggest that you download the SP3, then burn it to a CD.

  PS > I did successfully this SP3 update on many computers by using a CD.

• Very high Volume TOO low; How to increase?

  The largest volume I can get with the wheel turn, the level is too low to hear it on the machines, the YMCA, when doing the exercises.  I have the latest firmware update (I'm in the U.S. region.).  Y at - it a setting I can use to enhance the level of noise?

  Phil

  PRPluta wrote: I'm reading the forum that the EU sets lower volume, but I put the settings for the region of the USA.  I have updated the firmware... bought yesterdaya you laatest Fuze yesterday so this is my first experience of rocket.

  Phil

  There is a setting you may have missed.  On the "rocket", go to settings / system settings / Volume and make sure it is set on high.  This is the setting that the EU region is not available.

• Activate the integrated graphics controller (Acer Aspire M3970)

  Hi all

  I hope someone is able to tell me if it is possible to activate the graphics controller embedded on the Acer Aspire M3970.
  When I bought the pc, there was already an external graphics card in one of the slots. It contains only a HDMI and a DVI port, and the integrated graphics card has the possibility to use a HDMI and VGA port.
  I was wondering if it is possible to use both the external graphics card and the integrated graphic card so I can use 2 HDMI ports, the VGA port and DVI port.

  I know that most of the BIOS have an option to choose between what graphics card to use, but I can't seem to find it.
  I thought I'd find in: BIOS > ADVANCED > Integrated Peripherals, but I don't have options:

  Hi poepsmurf2

  As far as I know, you cannot use the graphics card and the edge together. You can buy a card with 2 HDMI or VGA and DVI ports.

  I hope this helps!

• Satellite L50 - A - headset volume is too low

  Windows 64-bit of 8.1

  The volume is too low when using a headset. I tried headphones and two different types of headphones on ear, both with no result. Office volume is set to maximum, as is iTunes and VLC.
  I also DTS enabled, which has stimulated a little volume, but it is still too quiet.

  Google search suggested the so-called "Compensation of volume" (playback devices > properties > improvements > Loudness equalization), which seems to be the generally accepted the problem solution, but that has not helped me at all.

  I am a student in music that makes a fair bit of audio processing for the good sound is important to me and it makes me crazy, does anyone have any suggestions?

  Thank you

  Eh, it's really hard to tell what the problem is here. As far as I know there is not much difference in how he works with internal or connected speakers earphones/headphones.

  I have two Toshiba laptops and there is absolutely no any kind of difference. When I change the sound level, it reacts as usual, regardless if headphones are connected or not.
  When you start some application open the volume mixer and check if the noise level is identical with a sound level for the speaker.

• Satellite A200 - 14 d - the internal microphone volume is too low

  Hello, I installed the latest version of bios and drivers, but the problem with the internal mic has not changed: the volume is too low (levels the MAX value)-> unusable.

  And when the AC is plugged in, a heavy background noise appears in the hip or trendy helmet speakers.
  In addition, in the mic plugged in too... :(

  Hello

  I found similar topic where the user called Andrej wrote:

  Try this please:
  1. the right of the mouse, click on its icon in the task bar choose sound option
  2. change in the recording tab
  3. mark the front mic and click Properties
  4. change in the last tab named advanced
  5. in exclusive mode, uncheck the box first one

  Please test now and give me some feedback.

• Volume too low check on iPad.

  I tried to record that I play on my electronic keyboard. The level of the microphone on my iPad 4 seems to be too low. There is no way to settle either. Even after put the volume of the keyboard to the max, and by setting the iPad on the speaker with the microphone down in the speaker, the recorded sound is extremely quiet. It is not a hardware problem since I can use FaceTime, Dictation or record audio with other applications without problem.

  I noticed a lot of comments in the app store to complain of the same show. It seems to be mostly from the iPads. There are people who specifically referred to problems with the iPad 4, iPad 2, iPad mini 2 and iPad Air. Some have said that they do not have the same problem when using their iPod Touch or iPhone 6. Any ideas or suggestions?

  I've seen several reports, that the problem has been resolved after updating to iOS 9.2.1.   Is this the version you are using on your iPad?

• Pavilion 15-p027tx: Audio volume too low on Pavilion 15-p027tx with beatsaudio

  The laptop comes with a beatsaudio system.

  Even if the volme is at its maximum, it is still too low.

  I tried reading devices > Speaker > properties > and then the enhancements tab is missing, so I can't change volume equalization.

  Help, please.

  Hi @MayurJoshi,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion Notebook 15-p027tx and the game its too low. Here is a document on the sounds troubleshooting.

  Please ensure that your edits were made on the laptop. In under his right click Device Manager and update driver. This is another step to try.

  1. right click the speaker icon in the lower right corner of your time.
  2. click on playback devices.
  3. click on speakers/headphones.
  4. click on properties.
  5. click on the Advanced tab in the Properties window.
  6. change the default menu Format in the highest quality.
  7. apply properties.
  8. click OK to close the Properties window.
  9. click OK to close the playback devices.

  What browser do you use? I would check to make sure that the browser is up-to-date.

  This occurs during playback of a DVD or CD?

  Make sure that you don't have other things running in the back when a video plays as open Windows Explorer perform streaming.

  Hope that helps you with the sound.

  Thank you.

• How to install old firmware? The volume is too low!

  I bought a rocket about 2 months ago, very happy with it when I bought it. He had the Firmware 1.00000000000000001 or something on it (an old anyway). I installed the new firmware 1.02.3F.

  The first thing I noticed: volume max came down. MASSIVELY.

  His way now too quiet, too quiet for car trips or train. I don't understand why it is not more discussion about this, its criminal. The EU removed ruin fun for everyone with their legislation deleted.

  Anyway, nobody knows where I could find an old firmware which is not the volume cap and how to install it? I would be a happy Bunny.

  P.S. tell me to buy a better helmet, I already have!

  It is a forum for use by people of all ages. Please do not forget to clean your comments when posting

   

  The Forum Admin

  slotmonsta

  You need not install old Firmware. Simply reset to the factory settings and to set the region at the "rest of the world', then you get a 'volume' option in Control Panel that you can set to high.

• Volume too low

  I have the volume, but it is too low.  It used to be high enough to hear, but somewhere along the way, he has changed.  I clicked on the volume and triggered the slider all the way to the top.  I clicked on "Mix" and raised the bar all the way to the top.  Is there something else I can do?

  Hi Wadella,

  1. are you referring to the internal speakers or external speakers?

  2. when the question is is produced?

  3. you remember to make changes to your machine before the problem?

  4. on which the application is too low volume?

  5 are you referring to the volume of a particular saved file is too low?

  I suggest that you follow these steps and check if it works to solve the problem.

  Step 1:

  Activate hidden Audio devices:

  a. right click on speaker near the clock-

  b. playback - made devices right click in the boxes area.

  c. check 'view turned off and disconnected devices '.

  d. Select speaker, then on the right click lower properties check the settings for the active device usage and so on.

  Also do same thing to configure at the bottom left of this box.

  Step 2:

  Update of your sound card driver and check if the problem persists.

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  Step 3:

  Follow all the steps from the article below and check if it can help solve the problem.

  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  (Click on fixit firstly for the AutoCorrect)

  See also:

  http://support.Microsoft.com/kb/948481

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Xperia Z5 too low ring volume

  Hi all

  I used Xperia Z5 almost 3 months and was very happy with my phone until I get 6.0.1. Now I have a very big problem with my phone, it's no longer stereo speakers.

  When I listen to music or watch the volume video game or the game is normal but it not balanced lounder very pregnant top speakers low and worse, is that when someone calls me my ringtone is really really too low it is not possible to hear it.

  I try to repair my phone with Sony comp. it did not work.

  Most likely, if I can't find a solution for this, I'm going to buy another phone and I buy never any phone Sony because I have exactly the same problem of my Xperia Z3 extracts + that is why I bought Z5, but I still have the same problem.

  Thank you

  BR

  I've tried change the ringer volume

• The volume on my MP3 player is too low after extraction and synchronization with windows media player. What can I do?

  I intend to play my MP3 in my car, but the volume is too low. I tried to adjust the volume on the car radio and the MP3 player, but the volume is still too low. I tore and synchronized through windows media player with MP3 and the speed of transmission of high-quality files. Also I tried to drag and drop in windows Explorer, but once again the volume is still too low.

  I tried also exactly the same with an IPOD shuffle, but again, the volume is too low.

  Try the steps in the article provided

  http://www.ehow.com/how_7464813_increase-DVD-rip-volume.html

• U2412M DisplayPort to HDMI to the computer port?

  I tried to connect my U2412M as a monitor using his DP port for my new laptop HP Envy, with its port HDMI CableMatters HDMI Cable of DP. Message on Monitor says cable DisplayPort No.. Tried a different cable and two other laptops with the same result. It should work, no? In addition, I tried with and without USB cable. How can I get this to work? Help please!

  HDMI from a computer cannot convert to DP on a monitor via a simple converter cable. The DP to HDMI cable standard will not work. These cables are made from a DP computer with a HDMI port monitor. Your options are as follows =

  Computer graphics card output HDMI--> HDMI to HDMI Cable--> HDMI converter Active DP --> DP cable on DP--> DP monitor in

  Card computer video output HDMI--> HDMI Câble DVI - D monitor DVI - D--> in

  Card computer video output HDMI--> HDMI to VGA Converter --> VGA cable VGA--> monitor VGA in

• Too low maximum volume in Windows 7

  I have upgraded to Windows 7 from Windows XP a few days ago, and the maximum volume is too low. All the settings are up, everything is correctly connected, all the drivers are up to date and Loudness equalization makes no difference. My software for speakers (Realtek HD Audio Manager) is not all the options that are not included in Windows 7 already. In Windows XP, I've been able to overcome that obstacle by adjusting the volume of wave, is there a way to do this at 7, or another way to increase the max volume?

  Hello

  I suggest you to follow the steps mentioned below:

  Method 1:

  Check volume settings. Follow these steps:

  a. right click on the speaker icon in the taskbar, then select volume control options.

  b. put a check mark on "all devices evolving sound.

  c. make sure you have "Default uncontrolled communication device".

  d. place a check on the speakers.

  Method 2:

  Open the troubleshooting of Audio playback and check if the problem occurs:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Method 3:

  If the previous step fails, follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Method 4:

  I understand that you have already tried updating the drivers, please to uninstall and reinstall the audio drivers completely as follows:

  a. click Start, type Device Manager in the Start Search box and press ENTER.

  b. click continue. The Device Manager dialog box appears.

  c. If you are prompted for an administrator password or a confirmation, type the password, or click continue.

  d. in r management device, right click on audio and its driver and click on uninstall.

  e. restart your computer and Windows 7 will reinstall the audio drivers automatically.

  You can also download and install the latest Realtek driver site:

  http://www.Realtek.com/

• An AMD Radeon 6970 graphics card will be compatible with my desktop computer?

  I own a HP Pavilion HPE h8xt series desktop computer.

  -INtel Core i7-2600 processor

  -16 GB of ddr3 RAM memory

  -460W power supply

  From now on, I have an AMD Radeon 6850 in my office, but I want to know that if I buy a 6970, if it will be compatible in my office and if not will work properly. Or if he simply does not work.

  Please answer as soon as possible because I need to know whether or not it is necessary to collect money for her for Christmas!

  Thank you!

  Hello

  Make sure that this AMD Sapphire 6970 will adjust.  It is 9.8 "length.  I also checked the length on the Sapphire site.  It's a card double slot.  This map requires a PCI-E power connector 8 pins.

  The Corsair CX600 is sufficient for the video card above.

  You can review the performance comparison between the 6850 and 6970 to this site.  Notice the power for the use of 6970 which means more heat inside your PC.