Volume seems quiet on P10 - 573

When you use the headset on my P10-573, the volume seems not very strong even when the volume control is set to max.

The same thing seems to be the case regardless of the media player I use. Is anyone aware of all hotfixes? Thank you.

Dave

Hi Dave

Sorry, but I you must ask this simple question. Have you checked all the possible settings for the audio and audio devices?

Tags: Toshiba

Similar Questions

  • My computer volume gets quiet, even at maximum volume, without apparent reason.

    Sometimes without reason tanks of volume on my computer and I cannot understand why. I'll change the main volume up, but nothing changes, and I will increase the volume of what I'm listening (it is more than a program, it does so it is not question of the program, but I mostly listen to Netflix or talking on Skype).

    Finally, it corrects itself, but it's very, very quiet to the point where I can't hear who I'm talking about and turn on the subtitles on Netflix.
    I don't know much about computers, this could be my sound card is going bad or something?

    Hello

    1. have you made changes on the computer before this problem?

    2. do you get any error code or error message?

    This problem usually causes due to driver problems. I would suggest trying the following methods and check if it helps.

    Method 1:

    Run the utility of game audio troubleshooting and check.

    Open the Audio playback troubleshooting utility:

    http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

    Method 2:

    Try the steps in the following Microsoft Help article and check if the problem persists.

    No sound in Windows:

    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

    Please respond with more information so that we could help you more.

  • My phone, when I try to call, the volume seem to be so slow than normal, what happens after I have updated my phone, whenever I wear my scarf that I barely hear anything... Any solution? Thanks in advance

    My phone, when I try to call, I could barely hear the voice of the speaker, even turning on the Mono Audio, I rebooted the phone but nothing, this problem occurs after I updated the ios 9.3.5 aka the recent, so any solution pls response asap thx in advance

    Hello, dzharun!

    Thank you for joining the communities Support from Apple! It seems that you encounter to the appellants the hearing in question on your iPhone. I know how important it is, you are able to hear callers. Restart the phone and adjusting the audio are very advanced! Read this article If you hear not a person on an appeal or a voice messageor if the sound is not clear on your iPhone. Since you have tried reboot, find out exactly as follows:

    Turn off the receiver

    The receiver of the iPhone will not work properly if it is blocked or dirty.

    Follow these steps, after each:

    • Make sure that nothing is blocking the receiver, such as a case or a movie.
      If you have a new iPhone, remove the plastic on the front and the rear of the unit.
    • Check the receiver opening to see if it is blocked or dirty. If necessary, clean the receiver opening with a clean brush, dry, soft.
    • While you're online, turn on the speaker. If you still do not hear, then your network or the reception might be the issue. Try calling again later or somewhere else.

    Also, check out this article with links to learn more: get help with hardware on your iPhone, iPad, and iPod touch features. It has links to articles for several steps to help with issues with the receiver and the speaker.

    See you soon!

  • Bluetooth microphone seems quiet

    I was really convinced that the problem was with my Bluetooth headset, but after you test it with another phone and my PC (in both cases, the Microphone works fine) I can only conclude that my Droid Mini is the problem (also I realize that this is the forum of MAXX 2 but there is no place for Droid Mini stuff so...).

    Is there a way to fix this? Y at - it a bluetooth microphone volume control? Thank you!

    This is often caused by a conflict with another application (defective). First of all, restart your phone test and safe mode. If the audio BT returns to normal, you must reactivate the apps one by one to isolate the one that creates the problem, then, even if it's one of your Favorites, disable and remove your phone. Re-download the latest version of the app store. This usually fixes the problem.

  • cannot hear volume.seem as audio device was accidentally delete/sond and music

    I can still hear not no matter what volume is deleted or rather audio device volume, how can I hear again. have no sound on youtube or facebook.

    Hello

    1 when was the last time it was working fine?

    2. what happens when you try to play a music file?

    3. do you receive any error messages?

    4. are you able to hear its native Windows?

    5. what browser you use to visit Web sites?

    6 did you a recent software or changes to the material on the computer?

    If you use Internet Explorer, I suggest you go through the steps and check.

    Try the following steps to resolve the problem:

    Method 1:

    a. open Internet Explorer. Go to tools, click on Internet Options.
    (b) switch to the tab 'Advanced'.
    c. scroll down to the 'multimedia' heading
    d. make sure that "play sounds in web pages" is checked. Click on 'ok'. Restart Internet Explorer. A test to see if you can hear sounds online.

    If you are facing problems with Windows itself, then I suggest you to run the FIXIT and check if it helps.

    Method 2:

    Run the fixit from the link below and.

    Diagnose and automatically repair audio playback problems:

    http://support.Microsoft.com/mats/AudioPlayback/

    Hope this helps and provide us more information if you need more assistance.

  • Maximum volume of quieter sound levels - Windows 7

    I saw that other people have this problem and I've not found a good answer on how to solve this problem online.

    My speakers do not sound too strong when everything is maxed out, as it was in the past.

    Someone suggested that I connect the Green wire to the plug of headphones before instead of 3-wire in the back... that helped make much stronger but not as strong as it used to be.

    Anyone know WHY this is happening and is there a SOLUTION for this?

    GRRRRRRR

    I sometimes wonder whether companies do such things for you force to buy the latest software.

    Thanks for trying to help me. It is greatly appreciated. You won't believe what broke. I went to the sounds playback devices, clicked on the speakers and their DEFAULT value. Somehow something has changed the parameters? I don't know how it happened. In addition, he showed Real Tek, which is now gone. Weird? But thank you!

  • Microsoft Lifechat LX - 3000 Volume is very quiet

    Good evening everyone,

    I am running windows 7 ultimate 64-bit edition.

    I recently bought this headset, its works very well, but even with the default volume very quiet sound max value.

    I tried uninstalling and reinstalling with own drivers, also I ran the Audio playback software to diagnose problems with no luck.

    The material looks very good, just the volume itself is very quiet.

    Hello

    Step 1: Check if the article helps you.
    http://support.Microsoft.com/kb/921334

    Step 2: Try to adjust the microphone volume

    a. Click Start, type mmsys.cpl in the search box and press ENTER
    b. in the recording tab, click on Microphoneand then clickProperties.
    (c) in the custom tab, click to clear the Microphone - 20dB
    d. in the levels tab, adjust the slider for the volume to the desired level and then clickOK.
    e. click OK to confirm the sound settings.
     
    Check the Linkhttp://support.microsoft.com/kb/969275

    Thanks and greetings
    Umesh P - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • Early 2011 MacBook speakers appear quieter this usual, easy fix?

    Hello

    I have a MacBook 2011 beginning El Capitan (version 10.11.2) running. The speakers on my mac have been quiet for awhile, but sometimes they seem to generate in life and give me the original strong output, what they did when I came to the computer.

    As they can occasionally give me the power output I don't think it's an ongoing problem, but I'm at a loss on how to solve this problem, maybe some needs bit cleaning but its really difficult to get access to the speakers.

    This problem affects the sound regardless of the application, I use for example iTunes or iPlayer and I tried to play in the system preferences and check that the volume is full enough, but the max volume seems to come and go, as it's easier to listen to the TV shows frequently with headphones to make sure that I can hear them properly.

    The headphone output seems not affected by this problem and I run Apple Hardware test and it came not with all the problems.

    Quick solutions or I need to see the guys at the genius bar or is it irreparable?

    Thank you

    Reset NVRAM could solve the problem.

  • Volume of the Satellite A80-127, reading

    I recently bought an SA80 and sometimes use it to stream audio, but its volume seems to be quite low. I tried using all options available through volume control the volume.

    So, can someone please confirm if that is the case with all laptops or y at - it maybe a problem with mine.

    Best regards

    Hello

    Have you checked for a physical volume on your SA80 (knob or button) control?

    He can control the volume regardless of the volume of software controls.

    HTH >)

  • Question about volume adjust the volume knob - Satellite Pro U300

    Hello

    I have a problem with the volume control. When I adjust the volume using the button on the left side of the laptop, I can only choose 3 levels of "loudness":

    No volume, very quiet volume and maximum volume (from rabies).

    Is this normal, is not anyone have problems with this?
    I hope that the problem is because of the digital volume adjustment screw. The adjuster does not record the exact position of the volume button. Every time when I get a phone call at work (I listen to internet radio), I turn off the radio by using the adjustment screw on the side of the laptop. When I end the phone call, I always need to open the laptop and the volume on the windows task bar, because when I use the device volume control on the left side of the laptop, it will just immediately at maximum volume.

    Welcome them

    Hello

    It s very strange that your volume control contains only 3 levels of volume
    I noticed that Toshiba has released a new driver (v. 6.0.1.5473) sound on the European driver page.

    How about if the update driver sound?
    Audio driver certainly controls the volume sound and in my opinion it s worth a try.

    Good luck

  • El Capitan utility disk first aid fails - unable to unmount the volume for repair

    Question: Given the following error with Disk Utility first aid and success with diskutil check volume, I should consider my drive damaged or volume?

    After a crash of the system on my Mac mini (end 2012) running that OS X El Capitan 10.11.3 has experienced a kernel panic induced by the adapter USB Wi - Fi, I dutifully ran first aid utility disk on each volume on the disk, in order to ensure the integrity of system files.

    What I feel with disk utility (GUI) first aid:

    First aid process has failed. If it is possible to backup the data on this volume.  Click OK to continue.

    Check the storage system

    Volume control

    disk4s2: search Volume headers

    disk4s2: search for disc labels

    12EB36F7-A2FD-450B-AB5A-DA2D430BA3B2 group of logical volumes on 1 device

    disk4s2: search the Volume metadata

    Logical volume group has a Volume of metadata 24 MB with double redundancy

    Start the analysis of the metadata for a valid checkpoint

    Load and check the Segment headers

    Load and check the payload control point

    Load and check the Transaction Segment

    Incorporate 0 most recent checkpoint operations of no

    Load and check the virtual address Table

    Load and check the use Table Segment

    Load and check the Metadata Superblock

    Load and check the volume logic B-trees

    Logical Volume group contains 1 Logical Volume

    Load and check 3D8DB35F-FA41-4A58-BA33-84A2C08FEE93

    Load and check 1CD6382C-9DF5-44E6-8C66-1CDC3DE5DB8A

    Load and check the summary of Freespace

    Load and check the accounting of block

    Load and check out virtual addresses live

    New control point of transaction commit is valid

    Load and check the Segment cleaning

    The 12EB36F7-A2FD-450B-AB5A-DA2D430BA3B2 volume seems to be OK

    Checking storage system exit code is 0

    Updated support for the volume partition that

    Impossible to disassemble for repair volume

    Operation failed...

    (underlining)

    Additional information: I didn't have any problems with this disk volume. I use it only as a Time Machine backup destination. It is an encrypted volume OS X Extended (respect for case-sensitive). My concern involves only disk utility complaint that its "first aid process has failed."

    After reading the complaints in other forums that utility disk on El Capitan has been "dumbed down" and can not perform many of the functions that the utility of the same name used to be able to perform in previous versions of Mac OS (complaints, I can't confirm because I'm relatively new to MacOS - although extremely in computing with Windows, UNIX and Linux) (, so I didn't get to use disk utility a lot, before El Capitan), I decided to do the same "check the volume" that I knew first aid was trying to perform with the diskutil command-line app.  Guess what? No error!:

    What I have experienced with command-line diskutil:

    sudo diskutil verifyvolume disk9

    Audit file system began on disk9 6TBMacOS_1_Archive

    Check the storage system

    Volume control

    disk4s2: search Volume headers

    disk4s2: search for disc labels

    12EB36F7-A2FD-450B-AB5A-DA2D430BA3B2 group of logical volumes on 1 device

    disk4s2: search the Volume metadata

    Logical volume group has a Volume of metadata 24 MB with double redundancy

    Start the analysis of the metadata for a valid checkpoint

    Load and check the Segment headers

    Load and check the payload control point

    Load and check the Transaction Segment

    Incorporate 0 most recent checkpoint operations of no

    Load and check the virtual address Table

    Load and check the use Table Segment

    Load and check the Metadata Superblock

    Load and check the volume logic B-trees

    Logical Volume group contains 1 Logical Volume

    Load and check 3D8DB35F-FA41-4A58-BA33-84A2C08FEE93

    Load and check 1CD6382C-9DF5-44E6-8C66-1CDC3DE5DB8A

    Load and check the summary of Freespace

    Load and check the accounting of block

    Load and check out virtual addresses live

    New control point of transaction commit is valid

    Load and check the Segment cleaning

    The 12EB36F7-A2FD-450B-AB5A-DA2D430BA3B2 volume seems to be OK

    Checking storage system exit code is 0

    Check the file system

    Using the live mode

    Perform direct verification

    Logged more HFS volume control

    Detected a case-sensitive volume

    Checking extents overflow file

    Check the extended attribute file

    Checking volume bitmap

    The 6TBMacOS_1_Archive volume seems to be OK

    File system check exit code is 0

    Finished on disk9 6TBMacOS_1_Archive file system check

    I will finish success of diskutil verifyvolume that my disk volume is not serious and that Disk Utility first aid simply does not correctly?

    Thank you!

    -IlDavo-

    I think you might be able to do a repair of first aid, after you have disassembled the drive first:

    1. Run OS X by an external device (ex: USB mode, or external hard drive or disk target from another Mac)
    2. Launch the Terminal and run the following command umount f /Volumes/ (ex: umount f/Volumes/Macintosh\ HD)
    3. Then run disk utility first aid.

    I had this problem on a Macbook Air, I tried to recreate the image to work, so I didn't need to get anything off the drive. I tried to format the drive and reinstall OS X. So I don't know if first aid work after disassembly, but it worked without a doubt after that I did the first two steps above and then deleted from the disk. Not sure if this will help, but worth a try, I guess.

  • Default setting of call Volume?

    I think remember on my D2G there was a setting of the sounds or the settings of the phone that allows you to set a default value in the volume of calls. I can't seem to conclude that, on the D4 and it would be nice to have as default value for the phone in call volume seems to be 100% which brings me to turn endlessly down the volume on each call. Most annoying...

    Appreciate the pointers.

    I've never seen this setting on this phone or any Droid before... maybe there is, but never saw it. But once I put in the volume of calls during a call, it remains at that level on each call until I have adjust again. It never sets the Max on any subsequent appeals.

  • Volume of the Satellite A300D going low-high-low-high

    Hello

    I have a Toshiba Satellite A300D and I was listening to music through the built-in speakers and the volume seemed to go low-high-low-high (as a pulse)

    It is not that noticeable, but now I know about it.
    I'm quite get irritated with it. (I'm playing music via iTunes)

    In addition, this also happens when I use headphones, and when I play through external speakers.

    Anyone have any ideas on how to solve this problem?

    In addition,

    The button of the Player multimedia music button on the laptop itself opens Windows Media Player.

    Does anyone know how to change it to iTunes?

    Thank you!

    > I get quite irritated with it. (I'm playing music via iTunes)

    Have you noticed what playing music with MS Media Player, Win Amp or other applications?
    Do you have this notice without installation of software 3rd party such as iTunes for example?

    To be honest I have never heard of this issue, and I think that this could be linked to the gift of pre-installed software 3rd party laptop.

    > The button of the Player multimedia music button on the laptop itself opens Windows Media Player.
    > Is anyone knows how to change it to iTunes?

    As far as I know that's not possible. I use my mind Winamp buttons because I could activate this software WinAmp but it s doesn't know only not for me, it would be iTunes software supports the extension of the networks too.

  • Turbo - Pandora and MP3 too low volume w / Bluetooth

    Hi all

    I hope that the forum can help, I have spent the weekend looking for this and other forums and still can not find a solution to my problem.

    I have a Turbo that I've been using listening to Pandora, IHeartRadio, Google Music and Amazon music player, but also to play MP3 Poweramp and the app Amazon (for local files) and it worked without problem with an accessory Belkin auto Conenct Bluetooth via the aux on the RAV4, and it worked pretty well for the last 2 years (Droid Maxx before the Turbo words)

    This weekend I bought a Hyundai Tucson to 2013 with Bluetooth factory, and while volumes for the phone and for notifications are fine, when I try to play any kind of music, MP3 streaming either stored locally, the volume seems to be half that of other sources. CDs play fine and I burned some MP3 files on a disc and they play very well this way, so it isn't a problem with the MP3 files themselves.

    I read that there are problems with the Turbo, with the Tucson, but I've also read of this same problem happening with other brands of phone and the car if she can't be unique for the Turbo or HYundai, but of something inherent in Android. All I know is that I use my phone as a source of music a little and it's embarrassing.

    Yes, I made sure the volume of BT is set while the device is streaming, the volume of the media is set as high as possible, I uninstalled everything that can affect the volume with the exception of profile of Volume, which I use with Tasker to ensure my phone not to ring too loudly at work (I have a trigger defined for the SSID of the network to the office which uses a setting saved to breast Profile of volume, when not in the office, I have a reverse rule set to use the 'Normal' setting Thinking that maybe that's the problem I checked and it had been set at 10 on a scale of 15 but put at 15 did not improve the situation.

    I tried Volume +, which is supposed to hang on the API and volume boost beyond the normal max level, but this had no effect, either.

    Anyone encountered this, or have ideas or suggestions? (I know that the last update release notes indicate that a change was made to the volume of Bluetooth but a) it does not seem to affect the profile of audio BT and b) it worked well after the update with my Belkin BT accessory.

    I'm very grateful for any help, thank you!

    Matt

    Hello

    I'm no longer Hunt the Turbo as the culprit of this issue, I've now matched my phone with several other vehicles (including another Hyundai, an Elantra 2013) and it has well in other cases... at this stage, it cannot be the vehicle.

    I'll pull the fuse for the audio system see if I can reset by providing sufficient volume, and I am also pursuing a resolution through my dealer, either via some sort of update or replacement of the radio under my warranty Platinum.

    Thank you for your help,

    Matt

  • volume and eq setting

    I was set my custom eq and with different settings, I adjust the volume for the same level. How does this affect battery life? I mean a more dynamic eq setting with smaller volume would result in a longer battery life than a flatter frame with higher volume?

    CSP wrote:

    No matter what the setting is? Another thing I noticed that when you set custom EQUALIZER, volume increases significantly when all the bars are set to 0, and if this is an amendment to one of the bars, upwards or downwards, the volume goes down.

    Given all the bars to 0 is like 'Normal' setting and will give the best battery life. This drop in volume seems to be a symptom of the extra power under development by customizing the EQ. I think that the presets are different, but... of course, most of them suck the only one I've ever used on occasion has been the setting of 'Jazz', which seem to help a pair of headphones, I have had.

Maybe you are looking for