volume turned down low, what voice format

I like to fall asleep while listening to music, will be the Sansa Fuze 8 GB play at a very low volume. (I hope there is a sleep mode)

What format are recorded voice files.

Hoping that you can help as I don't own one yet.

Thanks for your info. Come Sansa Fuze 8 gb. and have not yet playing with it. Looks the biz, think I will need a case. Check the update of the firmware.

Tags: SanDisk Sansa

Similar Questions

  • What to do when ipod touch volume turns down by itself

    iPod touch 5 has started to turn down the volume in itself the sep 11.

    I have already restored like new, it did not work.

    Today it didn't turn... so I decided to connect it to the PC... I opened ITunes and you press the power button and open a whole... it turned on.

    Open ITunes window saying there was a problem and it should be updated... If it did not work it needs to be restored again.

    What should I do?

    I tried to make an appointment at the Genius Bar, but so far nothing

    Thank you

    -Do you have a case on the iPod that could be turned on the switch?

    -Is what the volume switch/look stuck?

    -If you have restored the factory settings successfully / new iPod via iTunes that indicates a hardware problem. Try the Genius Bar

  • Can I use my Apple Watch to turn down the volume on my iPhone?

    Hello. I am looking to buy a Apple Watch for my wife for her birthday. She wants it only if it is supported by a very specific scenario. She wants to be able to turn down the volume on his iPhone * of * his Apple Watch. Is this supported?

    To be very clear, the scenario is the use of the watch to change the volume on the phone.  I know how to change the volume of the phone from the phone. I know how to change the volume of the watch from the phone. I know how to change the volume of the watch on the watch.

    But what I can't find info on after looking through the help/product guides, it's that it can control the volume of your iPhone remotely, using the Apple Watch.

    Any help much appreciated!

    Hello

    No, this is not possible.

  • Sound seems to be decreasing after that I have used headphones, or turned down the volume.

    I have a HP G62 and he had a GOOD volume, but after that I have to use headphones or turn down the volume, he seems to do something for the volume and when I want to play sound after headphones are disabled you can hardly hear it.
    I turned the volume up on top of everything I can find, but it is so weak, it is not worth listening to!

    Hello

    1. What is the operating system installed on the computer?

    2. were there any changes (hardware or software) to the computer before the show?

    Perform the steps in the article, and check whether the problem is resolved or not.

    No sound in Windows (Windows 7)

    Note: this also applies to Windows Vista and Windows XP

    Hope that helps.

  • Turn down the volume on the tone and ringing for HP Laserjet Pro M1536dnf

    We recently bought a Laserjet Pro M1536dnf.  I went through all the menus as well as the user's guide.  How do you turn down the volume for outbound faxes?  The tone and the call for ringtone is too loud and disturbing for the workers in the room where the fax.

    Hey Candlmc,

    If you press the key on the front panel of the M1536dnf, then you will be presented with the configuration menu.  Highlight the menu of system configuration and select it.  Scroll down the menu for the Volume settings and select it.

    This is the section that will allow you to change the ring volume and the volume of the phone line.

    Hope this helps,

    Jason

  • Satellite A100-532: the microphone volume is extremely low

    I just bought Satellite A100-532 and I have a problem with the audio input. I can't use the microphone to chat with my friend on msn or even record my voice on the hard drive because the volume is extremely low.

    I tried to turn the volume on the desktop and on the RealTek HD audio Manager, but nothing helped. Microphone works perfectly fine, as I hear myself on the speakers.

    Normally, with my old laptop (M30 series) I could use sound recorder to record the music that I play using Winamp or WinMediaPlayer, but for this new laptop it detects all the sounds at all... just silence.

    Please notify.

    Hello

    You should also check the volume controls in the "Audio & Sound devices" in the Panel.
    In the 'Volume' tab it please go to "Advanced".
    Then a "Volume control" should appear.
    Check if all controls are set at a high level.
    In addition, enter the 'options' and 'properties' and activate all volume controls.
    Also change to "recording" and activate here also all the controls.
    Additional you must check if the "check" is set to high.

    Use the 'Advanced' mic option and play with thrust mic settings.
    I'm sure that you will find the best settings for your mic record

  • Acer Switch 10 i. put powered w / power cord, power button + volume Up/Down ii. No LED light

    Problem:

    Power does not illuminate. 75% battery charge. A tried
    a. power switch button
    b. power button + volume Up/Down button for 60 seconds (technique of being able to be in hibernation mode)
    c. a/c power cord... light to show load or power not turn on AND the Tablet does not become hot... in other words, Tablet accepts no power coming from being plugged into an electric outlet

    Solutions to be able to put it back on

    1. perhaps central card mother battery died... Well, in the past my LAPTOP would work with single power supply and no battery... but... it is a tablet that works maybe like a mobile phone because if the battery is dead, then unit does not work until the Central battery has sufficient charge

    2. maybe an electrical circuit problem?

    3. may reset a deep sleep mode?   ... but already there is a technique of this situation and I tried it.

    4 perhaps, software power settings but if are unable to start. can't get to the BIOS.

    Thanks much for any help.

    Solution... it was an electrical problem, capacitor w / low-Volt charge had gone below this threshold to function, voltage decay over time.  Replaced.  Laptop as it has done before does not.

  • Media playback volume goes down when any usb device is inserted (REPORT of BUG)

    Whenever I have plug in a USB device (iPhone / USB key) and I media play (video in the browser / media player / music etc.) device that plays the media has the volume automatically turned down to very low volume.

    While I can increase the volume for the single device that is quite annoying... I have disabled the option of mixer to allow other apps to control the sound, but it continues to impose...
    I think it of more of a bug than anything else, but happy to try and proposed the solution

    Eeek just figured it out

    Sound > playback devices > Communications tab
    Change option to reduce the amount other noises of 80% nothing to do...
    I think that Windows thought my iPhone was a communication device, even if I tried to load ;)
  • Volume code reset button, what is its role?

    My phone was stuck in a boot loop (BLoD) after that I misplaced it and the battery is dead. I tried reset soft, factory resets and replace the battery. Nothing would get my phone to power. Then I read a post somewhere that the people have had luck with the volume key down while the apple logo appears on the screen. I tried the procedure and that's the phone starts! Why? I have no idea.

    At this point, the phone was for more than 5 hours, and now he has left on me. The phone will not answer what it is. Any thoughts?

    You are jailbroken?

    If you are jailbroken by holding down the up button starts the unit with disabled substrate.  If you are in essence start without active substrate. It will work if you are jailbroken.

  • My laptop volume is very low, even with the maximum setting. It also has a very annoying echo

    I tried every setting available on this laptop, go all together if not try several changes in all settings. The volume is still low and has a very annoying reverberation and echo effect, even with these settings turned off. I got it for a week, and I was very happy with any other accept the audio. The reasons for buying this model were media processing and so far I have and become more disgusted daily with her. It is a Pavilion dv6 and it has beat audio software. If anyone has a solution, it would be much appreciated.

    Hello

    One thing that can help is the following.  Do a right-click the speaker icon in the taskbar and select "playback devices".  Left click the device once to highlight default (it is usually 'speakers and headphones') and then click the properties button.  Click the enhancements tab and put a check mark in the box "Loudness equalization.  Click on apply to save the changes and then click OK in all other windows and see if allowed at all.

    Kind regards

    DP - K

  • Why the volume is so low when I use Google on my iPhone 6?

    Why the volume is so low when I use Google on my iPhone 6?

    When you use Google to do what? Are how much you referring?

  • Satellite L50 - A - headset volume is too low

    Windows 64-bit of 8.1

    The volume is too low when using a headset. I tried headphones and two different types of headphones on ear, both with no result. Office volume is set to maximum, as is iTunes and VLC.
    I also DTS enabled, which has stimulated a little volume, but it is still too quiet.

    Google search suggested the so-called "Compensation of volume" (playback devices > properties > improvements > Loudness equalization), which seems to be the generally accepted the problem solution, but that has not helped me at all.

    I am a student in music that makes a fair bit of audio processing for the good sound is important to me and it makes me crazy, does anyone have any suggestions?

    Thank you

    Eh, it's really hard to tell what the problem is here. As far as I know there is not much difference in how he works with internal or connected speakers earphones/headphones.

    I have two Toshiba laptops and there is absolutely no any kind of difference. When I change the sound level, it reacts as usual, regardless if headphones are connected or not.
    When you start some application open the volume mixer and check if the noise level is identical with a sound level for the speaker.

  • My new MacBook Pro unresponsive during the whole upward. Waited 30 minutes and turn again. What now?

    LLE MacBook Pro unresponsive during the implementation. Checked the online help and followed the advice to wait for 30 minutes, but always turn. What should I do now? Very impressed!

    Stopping and restarting. If necessary, stop by pushing and holding the power button down until what it disable and then release press to reboot.

  • The recorded sound volume is very low

    the recorded sound volume is very low... previous, it was good... Suddenly don't know why, he fell it please help

    the recorded sound volume is very low... previous, it was good... Suddenly don't know why, he fell it please help

    I tried to verify that levels under manage audio devcies... even all checked... but still not found a solution to this... Please help with several steps... I'll try each... Thank you

    Hi navnyu,

    (a) what software do you use to record audio? Using Sound Recorder in Windows Vista or any other third-party application?

    (b) what device you use to record audio? Micro analog video camera, CD player and DVD player

    You can check the volume settings on the device itself for the volume levels.

    Also check the settings of volume (if available) in the recording software

    Run the FIXIT available in the link below and check if that helps

    Tips for solving common audio problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

    Troubleshoot audio recording

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-audio-recording-problems

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • What video formats Journe Air 1000 is supported

    1. what video formats can be played on it?
    2. is it necessary to convert the video using SW closed or not

    Thank you

    Hello

    I discovered that the Toshiba Journe supports 1000 air than this media formats:
    JPEG, BMP, MOV (Motion JPEG), MP3, WMA

    If your movie supports other formats, then you will need to convert this video.

Maybe you are looking for

  • have iPod nano old - how to restore the default settings?

    My 2009 iPod Nano must be reset to the default value. How to do this? Want to start over with him (unlike computer - win now Mac; take no more music, etc..) Thank you. Mac Book Pro El Capitan 10.11.6

  • How can you find your restrictions password if you remember?

    How can you find your restrictions password if you do not remember?

  • Can satellite A300 - 15 M - I install a second HDD?

    Hello. I have a SatelliteA300 - 15M. 2 years ago, I bought the laptop. I have the 250 GB hard drive that came with the laptop. Recently, I received my laptop in service of the local store. I noticed that there was an additional location to another ha

  • Windows updates keep repeating

    I use XP Home Edition on a laptop HP Pavilion. There are 4 updates to Windows that keep install every time I turn on my computer, but there is always an icon on the taskbar that says that there are updates ready to install. As you can imagine, it's a

  • Error codes: 641, c1 & 80070641 (cannot install updates)

    Original title: Hi, I have problems with windows update. It says I have 5 important updates, but they do not work. I get error code 80070641, 3 641, c1. Can someone help me with this. Thank you Problems with Windows Update. 641, 80070641 and C1 error