Volume up button does not work like the shutter of the camera

Similar Questions

• "back" button does not work and the home page does not display on startup

  My buttons next and previous no longer work. They show just gray and I cannot click on them.
  Also my home page does not appear when I launch firefox.
  I reinstalled firefox 4 and then I went back to firefox 3.6.16 and have the same problem in both versions.
  Don't know what to do anymore
  I just found out that when I opened a second window everything works well in the second window, but it still does not work in the first window.
  The same thing happens when I close both windows. The first window of my home page does not appear and the back button does not work, but the second window is operating normally. Including my home page.

  Try:

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.

  See:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• Why not Firefox 4.0 back button does not work since the homepage or google search?

  I've just upgraded to firefox 4.0 tonight, and the back button is not working properly of my homepage or certain types of google searches.

  I can reproduce this problem every time by following these steps:

  (1) open a new tab, and I get a blank page.
  (2) select the Home button. I find myself at http://www.google.com/ig
  (3) go to the address bar type in a new URI, and press return

  Now, I leave my home page and go to the new page, but I can't go back to my home page.

  Similar behavior happens if I do a search on google for the address of quick search in the upper right.

  (1) start a new tab.
  (2) enter a search term and press enter
  3) click on one of the links to research and you transition to the new page, but the back button does not work.

  It works fine if I do something like:
  (1) open a new tab.
  (2) enter google.com in the address bar and press to enter.
  (3) do a GOOGLES search arae.
  4) click a search result link.

  This works very well for me.

  In my case, I turn off the Add McAfee SiteAdvisor 3.3.1 and the problem goes away.

• "Back" button does not work with the latest version of any help?

  Hi, I use the latest version. When I go through the pages, I can not be able to return to previous pages. The back button does not work. When I click the back button, the same page, it's not coming back... Any help would be much appreciated!

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode

  You can click right back or front button to open the history list.
  
  You can hold down the left button of the mouse either back or next to the history tab list opens.
  
  The current active entry has a bullet in front of it.
  
  
  
  If you place an entry in the historic session with the mouse tab, so you see an arrow to the left pointing (rear) left or right (forward) to show the direction.
  
  You can left click on an item to open it in the tab active or middle-click or Ctrl, click on an entry in this list to open that link in a new tab, just as you can with the other links.

• CLOSE first button does not work, but the second is

  Hi, I'm working on a new web site using Flex 3, but I have a weird problem where I got no information yet on the issue. I opened a TitleWindow to display a full-size image where I want to show a close button at the top and bottom of the image, a close button (some images are very huge and it is the purpose of the TitleWindow). The close button in the button works fine, but one upstairs work not at all (but it appears correctly). What I tried to do was to create 2 HBox inside an HBox. The two HBox are called hbox1a and hbox1b. In the hbox1a, I put a tag that contains the title of the image. In the hbox1b, I put the close button. But the "close" button down is not inside an hbox, pay only the next component in the TitleWindow.
  
  If anyone can help me to understand why the first close the (top) button does not work, I appreciate to understand.
  
  Thanks for any help!
  

  Well! It is always good to be able to respond to ourselves, but it was fast! Maybe because to explain on this forum has been a good thing to clean the idea!

  In any case, I decided to create a new function to close the TitleWindow where I decided to pass the ID (name) of the TitleWindow instead of the event.currentTarget.parent and it works! So I think that I can reduce this to a single function and use my second function for the two close button.

• The Touchpad right button does not work on the Satellite Pro L series

  The icon in the taskbar indicates that the right button is permanently pressed, if it is not.
  So I can't right click at all. A radio mouse works fine, but there are times I want to use the touchpad.

  In addition, the screen does not turn off, and the computer goes to sleep after the hours set in the options of energy saving.
  I listen to the radio a lot and do not want to display on.

  > The icon on the task bar shows that the right button is permanently pressed, if it is not.
  > So I can't right click at all. A radio mouse works fine, but there are times I want to use the touchpad.

  This could be linked to defective button. If you cannot use the right button, and the button appears to be clicked down, then I suppose that its hardware malfunction.
  In this case it must be replaced.

  > In addition, the screen does not turn off, and the computer goes to sleep after the hours set in the options of energy saving. I listen to the radio a lot, and don t want the display on.

  Have you chosen the right power Plan? In Control Panel-> power options you have to choose the diet plan and should click: change plan settings. Here, you can change the time when the display must be disabled.
  If this does not work, then I guess that this feature does not work because you press the button of the touchpad and the windows OS think that the notebook is in use

• Windows Media Player 12 volume up-down does not work with the mouse scrolling

  Windows media high-low Player volume does not work with mouse scroll... why?

  It is a simple function just add this option... plse something... wish...

  Hello

  I suggest you submit your feedback using the link below.

  http://mymfe.Microsoft.com/Windows%207/feedback.aspx?formid=195

• Firefox button does not work since the installation of 16.01 for win7 64-bit.

  Even if the button does not appear, there is no answer to the click of the mouse

  Hello ken, perhaps an add-on is involved here. can you try to start firefox in safe mode once and see if the problem occurs there too? Thank you

  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• Enter the button does not work in the address bar.

  After entering an address of site in the address bar, type either the AutoComplete history, pressing enter me does not send to the page, and I manually click on the button go to the right.
  Deactivating all my plugins makes no difference.

  This problem may be caused by the AVG Safe Search extension.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

• Why push button and stop button does not work in the structure of the casing and buckle my VI? (code attached)

  I am a beginner. I'm trying to create a simple VI only switches beetween two types of signals like sine and triangle when someone press on the push button and at the same time, save the data in the file to my desktop. I also have a stop button which no longer record data.  Here are my questions and dproblems:

  1. when I press the button, it does not the true and false in the structure of the case so that I can see the triangle wave stops and begins the sine waveform table.

  2 when I press the stop button, I want the program still running, but the process of writing data in time the loop stops. I don't mind if the graph of the wave stops too but it would be better for the user to see the wave form is running, but the data will stop recording.

  3. Although the condition of the loop did not accept the local variable for the stop button inside the loop or within the structure of the case, so I put the button outside all the loops and the structure.  (I know that this is a problem, I do not know how to use a single button several times in a single code. The local variable did not work the world premiere? I have to?)

  4. the data file it creates hase a lot of lines and columns. I expect a time column and a column of mixed signals based on the push button amplititude this user press every time.  I did that with the acquisition of data and a sensor, it automatically gives me the voltage and time in a column. I tried 2D and 1 d and it has not changed anything.

  Thank you for your help

  

  

  Like you said, you read only your entries at the beginning, then whatever value they had before you hit run is worth to be seen by the rest of the code. Programming LabVIEW is based entirely on the data flow and parallelism. It is incredibly powerful and has led to its success over the years (coupled with graphical programming), but is usually one of the first things the new developers stumble on. This is a simple resource to familiarize themselves with its functioning. The function to highlight execution is a great way to watch how your application uses data streams.

  

  Simple code goes like this:

  • Containing the main code of while loop
    • Inside of the whole loop is all user interaction code or modify the code entry
    • Stop the terminal loop is attached to stop certain criteria or user selection of a stop button
  • Loop initialization above all if necessary
  • Closing referrals and communications, etc after all loop

  It's very simple code. If you want to watch in more advanced architectures that are scalable, Google "LabVIEW State Machine" or "LabVIEW producer consumer."

  If you are just starting, you should do a free training have the capabilities of LabVIEW.

  "Give me six hours to chop down a tree and I will spend the first four sharpening the axe.  -Abraham Lincoln

  Here are some free training focused mainly on LabVIEW and hardware tools to help get started.

  Training center of NOR

  NEITHER start-up

  -Hardware Basics

  -Guide of MyRIO project Essentials (a lot of good simple circuits with links to youtube events)

  -LabVEW databases

  -DAQ Application tutorials

  -CRIO Developer's guide

  Learning OR training videos resources

  Introduction to LabVIEW for 3 hours

  Introduction to LabVIEW for 6 hours
  Paced self-study for students
  Self Paced Training beginner to advanced, required SSP
  LabVIEW training Wiki

• Volume control button does not work as it should on Satellite P

  Hello.

  I flip the button that controls the volume, and I realize that he is not following me!
  I have the volume and it decreases with a funny way irregular (very little)...
  I have the volume and even it does, or it does nothing!

  Can someone help me with this?

  What model of laptop do you have?

  I have a U400 and I ve got the same volume control.
  I read here in the very similar topic forum and the guy has solved this problem to clean the contacts.
  There was mud and dust which affected the volume control feature.
  Volume control level jumped around.

  I put t know how he did it, but I think that a jet of compressed air should help you.

• What to do if the reset button does not work on the Airport extreme a1408 w / Password lost?

  What to do if will not work the Reset button on Airport Extreme a1408? The password is lost (bought used). I spent several hours trying every method I could find anywhere on how to reset; soft, hard and default. Airport utility doesn't let me do anything without the previous owner password. I can't get him.

  Can anyone help?

  At this point, your only hope is to open the AirPort Extreme to try to repair the reset button... If possible. This link provides some tips on the process to open the unit.

  https://www.iFixit.com/device/Apple_Airport_Extreme_Model_A1408

  Honestly, it isn't easy, unless you're a guy real DIY, you can buy an A1408 used on Amazon for about $35-40.

• When I open a new tab, the back button does not work on the second page, I discover - never the second page, regardless of the site.

  When I opened a new tab - or when I first open a browser - as soon as I go to a second page, I can't go back to the first. Thus, for example, I opened a new tab. I go to a news site. I click on a title. I can not then go back to the first page of the new site. If I go back to the first page manually (by typing the url, or by opening a bookmark) and then click on the same heading, I'll be able to go back.

  The inability to return only ever happens on the second page opens in a new tab or window. At any time, I can go back as normal - but the first page I was on that tab / in this window is erased from history.

  This isn't something that's happened only with FF4, either. I first noticed a couple of weeks, but I upgraded shortly after, assuming it was a bug that would set the new browser. But it's always like that. He still refuses to back the second page of the first.

  This problem may be caused by an extension (McAfee SiteAdvisor) that is not working properly.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.

  See:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• Exit button does not work in the browser window - 8 Captivate

  Someone at - he found a way to get the button leave on the 8 Captivate toolbar to work in the browser window?  I saw that he did not work in previous versions of Captivate. Is there a way to operate in 8 Captivate?  Alternatively, Adobe is working on a fix to get the button work?

  Yes, the close X works in 100% of the time. This is because the browser itself is just a window in the operating system. And you're dominating the window to close.

  And you might wonder why this works while the Exit button fails back. And it would be that it is a security issue. Safety prevents the window from closing because if a web site has been bad, he could actually trick you by change and quickly close the window and prevents you from browsing.

  It is easy to disable the button Exit. Just click Project > Skin Editor and erase the close box.

  

  See you soon... Rick

• Search button does not work on the start page

  When I get home the point I want to search i.e. Griffin vulture in the search bar in the center of the home page and then click on the button Search to the right of the bar, that nothing happens

  Try to use the extension SearchReset reset preferences to default values.

  • https://addons.Mozilla.org/firefox/addon/SearchReset/

  Note that the SearchReset extension runs only once and then uninstalls automatically, so it will not appear on the page "> Firefox Add-ons" (topic: addons).

  You can also check if you have the XML files including Google's default search engine in the searchplugins folder in the Firefox program folder.

  If this isn't the case, then you need to reinstall Firefox.

  • http://KB.mozillazine.org/Unable_to_search_or_add_new_engines