VPN and fixup protocol smtp 25

yet another VPN question... Sorry!

I have a VPN site-to-site running between 2 515E, everything works fine... but I have to disable the function of mail-Guard of two pix if I want the 2 servers exchange to send the email to one of the other.

is there anyway I can turn on this feature and always allow exchange servers to send e-mail?

Thank you

We have several sites with disabled mail Guard, and so far there is no drama.

I was wondering why you want to reactivate.

Tags: Cisco Security

Similar Questions

  • Fixup protocol smtp 25

    Exchange e-mail servers run ESMTP.

    The only way that the PIX firewall allows ESMTP is to disable the correction of SMTP 25.

    Does that not create security expsoures on the firewall for SMTP.

    Is there a way to customize mailguard to protect SMTP and still allow ESMTP through.

    regds

    Johnny

    This is a free update if you have a smartnet contract on your PIX. A Smartnet contract gives you the software updates on the material covered. Hope that this helps explain the issues.

    Scott

  • VPN and static

    Unable to connect to the VPN, when I remove the entry satic I can connect, but if I remove entry static I can't recive email...

    Help, please

    6.3 (4) version PIX

    interface ethernet0 car

    interface ethernet1 100full

    ethernet0 nameif outside security0

    nameif ethernet1 inside the security100

    enable password xxxx

    passwd xxx

    pixfirewall hostname

    domain ciscopix.com

    fixup protocol dns-length maximum 512

    fixup protocol ftp 21

    fixup protocol h323 h225 1720

    fixup protocol h323 ras 1718-1719

    fixup protocol http 80

    fixup protocol rsh 514

    fixup protocol rtsp 554

    fixup protocol sip 5060

    fixup protocol sip udp 5060

    fixup protocol 2000 skinny

    fixup protocol smtp 25

    fixup protocol sqlnet 1521

    fixup protocol tftp 69

    names of

    inside_outbound_nat0_acl ip access list allow any 192.168.0.192 255.255.255.224

    Note to outside_access_in to access list incoming EMAILS

    outside_access_in list access permit tcp any host 192.168.1.3 eq smtp

    Comment from outside_access_in-incoming access POP list

    outside_access_in list access permit tcp any host 192.168.1.3 eq pop3

    Comment from outside_access_in-list of remote desktop access

    outside_access_in list access permit tcp any any eq 3389

    pager lines 24

    Outside 1500 MTU

    Within 1500 MTU

    outdoor IP 192.168.1.2 255.255.255.0

    IP address inside 192.168.0.10 255.255.255.0

    alarm action IP verification of information

    alarm action attack IP audit

    pool of local IP KMCBVPN 192.168.0.200 - 192.168.0.210

    location of PDM 192.168.0.192 255.255.255.224 outside

    location of PDM 192.168.0.1 255.255.255.255 inside

    PDM logging 100 information

    history of PDM activate

    ARP timeout 14400

    Global 1 interface (outside)

    NAT (inside) 0-list of access inside_outbound_nat0_acl

    NAT (inside) 1 192.168.0.0 255.255.255.0 0 0

    static 192.168.1.2 (indoor, outdoor) 192.168.0.5 netmask 255.255.255.255 0 0

    Access-group outside_access_in in interface outside

    Route outside 0.0.0.0 0.0.0.0 192.168.1.1 1

    Timeout xlate 0:05:00

    Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

    H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

    Timeout, uauth 0:05:00 absolute

    GANYMEDE + Protocol Ganymede + AAA-server

    AAA-server GANYMEDE + 3 max-failed-attempts

    AAA-server GANYMEDE + deadtime 10

    RADIUS Protocol RADIUS AAA server

    AAA-server RADIUS 3 max-failed-attempts

    AAA-RADIUS deadtime 10 Server

    AAA-server local LOCAL Protocol

    Enable http server

    http 192.168.0.0 255.255.255.0 inside

    No snmp server location

    No snmp Server contact

    SNMP-Server Community public

    No trap to activate snmp Server

    enable floodguard

    Sysopt connection permit-pptp

    Telnet timeout 5

    SSH timeout 5

    Console timeout 0

    VPDN PPTP-VPDN-group accept dialin pptp

    VPDN group PPTP-VPDN-GROUP ppp authentication chap

    VPDN group PPTP-VPDN-GROUP ppp mschap authentication

    VPDN group PPTP-VPDN-GROUP ppp encryption mppe auto

    VPDN group configuration client PPTP-VPDN-GROUP address local KMCBVPN

    VPDN group VPDN GROUP-PPTP client 192.168.0.1 dns configuration

    VPDN group VPDN GROUP-PPTP pptp echo 60

    VPDN group VPDN GROUP-PPTP client for local authentication

    VPDN username user1 password *.

    VPDN username user2 password *.

    VPDN username password user3 *.

    VPDN username hilal password *.

    VPDN allow outside

    dhcpd address 192.168.0.11 - 192.168.0.42 inside

    dhcpd lease 3600

    dhcpd ping_timeout 750

    dhcpd outside auto_config

    Terminal width 80

    Cryptochecksum:xxxx

    : end

    pixfirewall (config) #.

    I forgot to mention, you could also do clear xlate after orders to have to clean up.

  • The host 'SMTP' could not be found. Please check that you have entered the server name correctly. _ subject 'Report issue', account: 'POP3', server: 'SMTP', Protocol: SMTP, Port: 25, secure (SSL): no, Socket error: 11001, error number: 0x800CCC0D

    The host 'SMTP' could not be found. Please check that you have entered the server name correctly.
    'Report issue', account: 'POP3', server: 'SMTP', Protocol: SMTP, Port: 25, secure (SSL): no, Socket error: 11001, error number: 0x800CCC0D.
    I'm answering an ad on craigslist and Windows Live continues to appear, but will not send my email I can be reached at * address email is removed from the privacy * or 614-499-1541.
    Thank you
    Stephen lawless

    Your post has nothing to do with Windows Update.

    You're not even close to have properly configured your e-mail account in Windows Live Mail.

    You will find support for Win7 e-mail Clients in this forum: http://social.answers.microsoft.com/Forums/en-US/w7network/threads

    You will find support for Windows Live Mail in this public newsgroup:
    http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Windows.live.mail.desktop

    Through your News Reader:
    News://msnews.Microsoft.com/Microsoft.public.Windows.live.mail.desktop

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • I get an error of Protocol SMTP Port 465 0x800CCC0F on Live Mail using 2 separate Yahoo accounts

    I transferred my two yahoo email accounts in Windows Live Mail. One account works well but the other shows send the above error when I type:

    I get an error of Protocol SMTP Port 465 0x800CCC0F on Live Mail using 2 separate Yahoo accounts

    Hello

    The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

     

    Windows Live Mail

    Windows Live Hotmail

    Windows Live Messenger

    Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

  • When I try to reply to messages on some websites via Outlook, I get: "no socket error 11001 protocol smtp port 25 google host was not found."

    When I try to reply to messages on some Internet sites via outlook, I get, no socket error 11001 protocol smtp port 25 google host cannot be found.  also when attempt to send from outlook, I get, google found 3 error socket port 110 Protocol pop 0X800CCC0D.i am not very good at such things but can follow directions if they are not complicated to. A few years ago someone set up my computer and I remember their delete something with outlook, because I was going to use google to e mail.but I'm not sure. This problem became a big drawback.

    original title:, not socket error11001 protocol smtp port 25 host not found google, google can't find ox8oocccod

    Hello

    see this link:

    http://www.FixYa.com/support/t2859101-cannot_get_or_send_mail_error

  • I get errors saying found protocols SMTP port 25. I am unable to use Outlook Express but navigation works very well.

    original title: ERROR MESSAGE not FOUND PROTOCOLS SMTP / PORT 25, ETC. don't CAN NOT USE OUTLOOK exp. reg.. INTERNET WORKS FINE

    SOME SELLERS AND MUNICIPAL SITES INSIST YOU USE 'OUTLOOK EXPRESS' THAT MY COMPUTER does not RECOGNIZE no - NO PROBLEMS WITH INTERNET REGULAR, cable INTERNET, etc - ERROR MESSAGE ABREVIATED: "host not found, server pop3 - smtp port 25, @ 11001" Protocol ".

    computer is a HP 64 bit model "pavillion a1600n.
    Should I complain to comcast?
    Gordon Derman
    E-mail address is removed from the privacy *.

    Take a look at this with Comcast links.

    Setting up email in Outlook Express servers:
    http://www.Microsoft.com/Windows/IE/community/columns/mailserver.mspx

  • RVL200 - SSL VPN and firewall rules

    Forgive my ignorance, but I have been immersed in the configuration of this device RVL200 to allow Remoting SSL VPN to a customer site, sight unseen.  I have the basics of the VPN set up in config, but now move the firewall rules.  We want to block all internal devices to access the Internet, but I don't want to cripple the remote clients that will be borrowed by blocking their return via the SSL VPN traffic.  This leads to my questions:

    (1) a rule of DENIAL of coverage for all traffic OUTBOUND will prevent the primary function of the VPN (to allow the administration away from machines on the local network)?

    (2) if the answer to #1 is 'Yes', what ports/services do I need to open the side LAN?

    (3) building # 2, configuring authorized outbound rules apply only for VPN clients, rather than all the hosts on LAN?

    (4) as the default INCOMING traffic rule is to REFUSE EVERYTHING, do I have to create a rule to allow the VPN tunnel, or guess that in the configuration of the router?

    Here are some other details:

    • The LAN behind the RVL200 is also isolated LAN in a manufacturing environment
    • All hosts on this network have a static IP address on a single subnet.
    • The RVL200 has been configured with a static, public IP on the WAN/INTERNET side.
    • DHCP has been disabled on the RVL200
    • Authentication to the device will use a local database.
    • There is no such thing as no DNS server on the local network
    • The device upstream of the RVL200 is a modem using PPPoE DSL, and the device has been configured for this setting.
    • Several database of local users accounts were created to facilitate the SSL VPN access.

    I worked with other aspects of it for a long time, but limited experience with VPN and the associated firewall rules and zero with this family of aircraft.  Any help will be greatly appreciated.

    aponikikay, there is no port forwarding necessary to the function of the RVL200 SSL - VPN.

    Topic 1. That is not proven. It shouldn't do. The router should automatically make sure that the SSL - VPN router service is functional and accessible.

    Re 2. No transfer necessary. In addition, never before TCP/UDP port 47 or 50 for VPN functions. The TCP 1723 port is used for PPTP. UDP 500 is used for ISAKMP. You usually also to transmit TCP/UDP 4500 port for IPSec encapsulation.

    Let's not port 47. ERM is an IP protocol that is used for virtual private networks. It is a TCP or UDP protocol. GRE has 47 IP protocol number. It has nothing to do with TCP or UDP port 47. TCP and UDP are completely different protocols of free WILL.

    It goes the same for 50: ESP is the payload for IPSec tunnels. ESP is the Protocol IP 50. It has nothing to do with TCP or UDP port 50.

    'Transfer' of the GRE is configured with PPTP passthrough option.

    'Transfer' of the ESP is configured with IPSec passthrough option.

  • When I try to email using Windows, I get: Acct: POP server: SMTP, Protocol: SMTP, Port: 25, secure: no, Socket error: 11101, ErrorNumber: 0X800CC0D. Does not send mail... Help!

    When I try to send an e-mail using Windows, I get the error message shows: account: POP. Server: SMTP; Protocol: SMTP; Port: 25; Safe: No; Socket error: 11101; Error number: 0X800CCCOD.

    Not surprising. Name of your server is not SMTP and your account name is not POP. You need get the settings appropriate to your mail server.

    Windows Mail: Setting up an account of end-to-end
    http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish

    A guide to setting up Windows Mail beginner
    http://www.SimpleHelp.NET/2007/02/07/a-beginners-guide-to-setting-up-Windows-Mail/

    Bruce Hagen MS - MVP [Mail]

  • Subject ' test 2', account: ' express.cites.uiuc.edu (1) ', server: ' express - smtp.cites.uiuc.edu', Protocol: SMTP, server response: ' 250 HELP ', Port: 25, secure (SSL): Yes, Server error: 250, error number: 0x800CCC7D

    Error message in Windows Mail and Vista Premium where can receive the mail, but cannot send:
    Error message:
    Subject ' test 2', account: ' express.cites.uiuc.edu (1) ', server: ' express - smtp.cites.uiuc.edu', Protocol: SMTP, server response: ' 250 HELP ', Port: 25, secure (SSL): Yes, Server error: 250, error number: 0x800CCC7D

    Please repost your question in the Forum program: http://social.answers.microsoft.com/Forums/en-US/vistaprograms/threads where the people who specialize in complementary programs such as Windows Mail will be more than happy to help you with your problem.  This looks like a server or configuration problem but these people are the experts and you should consult them.

    Good luck! Lorien - a - MCSE/MCSA/network + / A +.

  • Difference between webVPN, SSL vpn and ipsec client

    Hello

    We just bought an ASA5510 and I am trying to understand the difference of the possibilities mentioned VPN. Can anyone describe the differences and use scenarios of all types of remote access vpn of the asa?

    Thanks in advance.

    Rgds,

    Rasmus

    Hi Rasmus,

    They use different SSH and IPSEC protocols, and there is also of course in terms of security.

    SSL is easy to deploy than ipsec. Imagine that you have 200 + users and to connect to the vpn, you must give them the pcf file and client software, which is not required in the case of SSL.

    Kind regards

    ~ JG

    Please note if assistance

  • WLM has stopped sending after power failure. Error 0x800ccc0D #; Server: NULL; Protocol: SMTP; Secure (SSL): No; Socket error: 11004

    No problem until the blackout of 55 hours.  Provider, Windstream, said it is a matter of Microsoft.

    Error 0x800ccc0D #;

    Server: NULL;

    Protocol: SMTP;

    Secure (SSL): No;

    Socket error: 11004

    Something is wrong with your account settings, because the address of the server disappeared. You will need to delete the account and add it back again. Right-click on the account name, and then select remove account. Read the warning appears and act accordingly before continuing, because all traces of the account - account settings, folders, and the messages in them - will be permanently deleted. Press Ctrl-Shift-T to start the Add your e-mail accounts Wizard and finish to add the account back again.

  • remote VPN and vpn site to site vpn remote users unable to access the local network

    As per below config remote vpn and vpn site to site vpn remote users unable to access the local network please suggest me a required config

    The local 192.168.215.4 not able ping server IP this server connectivity remote vpn works fine but not able to ping to the local network vpn users.

    ASA Version 8.2 (2)
    !
    host name
    domain kunchevrolet
    activate r8xwsBuKsSP7kABz encrypted password
    r8xwsBuKsSP7kABz encrypted passwd
    names of
    !
    interface Ethernet0/0
    nameif outside
    security-level 0
    PPPoE client vpdn group dataone
    IP address pppoe
    !
    interface Ethernet0/1
    nameif inside
    security-level 50
    IP 192.168.215.2 255.255.255.0
    !
    interface Ethernet0/2
    nameif Internet
    security-level 0
    IP address dhcp setroute
    !
    interface Ethernet0/3
    Shutdown
    No nameif
    no level of security
    no ip address
    !
    interface Management0/0
    Shutdown
    No nameif
    no level of security
    no ip address
    management only
    !
    passive FTP mode
    clock timezone IST 5 30
    DNS server-group DefaultDNS
    domain kunchevrolet
    permit same-security-traffic intra-interface
    object-group network GM-DC-VPN-Gateway
    object-group, net-LAN
    access extensive list ip 192.168.215.0 sptnl allow 255.255.255.0 192.168.2.0 255.255.255.0
    192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0
    tunnel of splitting allowed access list standard 192.168.215.0 255.255.255.0
    pager lines 24
    Enable logging
    asdm of logging of information
    Outside 1500 MTU
    Within 1500 MTU
    MTU 1500 Internet
    IP local pool VPN_Users 192.168.2.1 - 192.168.2.250 mask 255.255.255.0
    ICMP unreachable rate-limit 1 burst-size 1
    enable ASDM history
    ARP timeout 14400
    NAT-control
    Global 1 interface (outside)
    NAT (inside) 1 0.0.0.0 0.0.0.0
    Route outside 0.0.0.0 0.0.0.0 59.90.214.1 1
    Timeout xlate 03:00
    Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
    Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
    Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
    Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
    timeout tcp-proxy-reassembly 0:01:00
    dynamic-access-policy-registration DfltAccessPolicy
    the ssh LOCAL console AAA authentication
    AAA authentication LOCAL telnet console
    AAA authentication http LOCAL console
    AAA authentication enable LOCAL console
    LOCAL AAA authentication serial console
    Enable http server
    x.x.x.x 255.255.255.252 out http
    http 192.168.215.0 255.255.255.252 inside
    http 192.168.215.0 255.255.255.0 inside
    No snmp server location
    No snmp Server contact
    Server enable SNMP traps snmp authentication linkup, linkdown cold start
    Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT
    life crypto ipsec security association seconds 28800
    Crypto ipsec kilobytes of life - safety 4608000 association
    Crypto-map dynamic dynmap 65500 transform-set RIGHT
    card crypto 10 VPN ipsec-isakmp dynamic dynmap
    card crypto VPN outside interface
    card crypto 10 ASA-01 set peer 221.135.138.130
    card crypto 10 ASA - 01 the transform-set RIGHT value
    crypto ISAKMP allow outside
    crypto ISAKMP policy 10
    preshared authentication
    3des encryption
    sha hash
    Group 2
    life 86400
    crypto ISAKMP policy 65535
    preshared authentication
    the Encryption
    sha hash
    Group 2
    lifetime 28800
    Telnet 192.168.215.0 255.255.255.0 inside
    Telnet timeout 5
    SSH 0.0.0.0 0.0.0.0 outdoors
    SSH timeout 5
    Console timeout 0
    management-access inside
    VPDN group dataone request dialout pppoe
    VPDN group dataone localname bb4027654187_scdrid
    VPDN group dataone ppp authentication chap
    VPDN username bb4027654187_scdrid password * local store
    interface for identifying DHCP-client Internet customer
    dhcpd dns 218.248.255.141 218.248.245.1
    !
    dhcpd address 192.168.215.11 - 192.168.215.254 inside
    dhcpd allow inside
    !
    a basic threat threat detection
    Statistics-list of access threat detection
    no statistical threat detection tcp-interception
    Des-sha1 encryption SSL
    WebVPN
    allow outside
    tunnel-group-list activate
    internal kun group policy
    kun group policy attributes
    VPN - connections 8
    Protocol-tunnel-VPN IPSec
    Split-tunnel-policy tunnelspecified
    Split-tunnel-network-list value split tunnel
    kunchevrolet value by default-field
    test P4ttSyrm33SV8TYp encrypted password username
    username kunauto password bSHrKTGl8PUbvus / encrypted privilege 15
    username kunauto attributes
    Strategy Group-VPN-kun
    Protocol-tunnel-VPN IPSec
    tunnel-group vpngroup type remote access
    tunnel-group vpngroup General attributes
    address pool VPN_Users
    Group Policy - by default-kun
    tunnel-group vpngroup webvpn-attributes
    the vpngroup group alias activation
    vpngroup group tunnel ipsec-attributes
    pre-shared key *.
    type tunnel-group test remote access
    tunnel-group x.x.x.x type ipsec-l2l
    tunnel-group ipsec-attributes x.x.x.x
    pre-shared key *.
    !
    class-map inspection_default
    match default-inspection-traffic
    !
    !
    type of policy-card inspect dns preset_dns_map
    parameters
    maximum message length automatic of customer
    message-length maximum 512
    Policy-map global_policy
    class inspection_default
    inspect the preset_dns_map dns
    inspect the ftp
    inspect h323 h225
    inspect the h323 ras
    Review the ip options
    inspect the netbios
    inspect the rsh
    inspect the rtsp
    inspect the skinny
    inspect esmtp
    inspect sqlnet
    inspect sunrpc
    inspect the tftp
    inspect the sip
    inspect xdmcp
    inspect the icmp
    !
    global service-policy global_policy
    context of prompt hostname
    call-home
    Profile of CiscoTAC-1
    no active account
    http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address
    email address of destination [email protected] / * /
    destination-mode http transport
    Subscribe to alert-group diagnosis
    Subscribe to alert-group environment
    Subscribe to alert-group monthly periodic inventory
    monthly periodicals to subscribe to alert-group configuration
    daily periodic subscribe to alert-group telemetry
    Cryptochecksum:0d2497e1280e41ab3875e77c6b184cf8
    : end
    kunauto #.

    Hello

    Looking at the configuration, there is an access list this nat exemption: -.

    192.168.215.0 IP Access-list extended sheep 255.255.255.0 allow 192.168.2.0 255.255.255.0

    But it is not applied in the States of nat.

    Send the following command to the nat exemption to apply: -.

    NAT (inside) 0 access-list sheep

    Kind regards

    Dinesh Moudgil

    P.S. Please mark this message as 'Responded' If you find this information useful so that it brings goodness to other users of the community

  • PIX-to-client VPN and how to reach on other interfaces systems

    Hi all

    I've implemented a Pix-to-Client VPN and it seems works ok.

    As you can see, customer gets the same inside the class address (192.168.100.x) so I can reach across systems.

    My questions are:

    If I give different subnet pool addresses, how can 1 I still reach inside systems?

    2 if I have other systems on these interfaces such dmz1 (192.168.10.0) dmz2 (192.168.20.0) how to get to these systems of the

    even the client vpn access?

    Concerning

    Alberto Brivio

    IP local pool vpnpool1 192.168.100.70 - 192.168.100.80

    access-list 102 permit ip 192.168.100.0 255.255.255.0 192.168.100.0 255.255.255.0

    NAT (inside) - 0 102 access list

    Permitted connection ipsec sysopt

    Crypto ipsec transform-set esp - esp-md5-hmac trmset1

    Crypto-map dynamic map2 10 set transform-set trmset1

    map map1 10 ipsec-isakmp crypto dynamic map2

    map1 outside crypto map interface

    ISAKMP allows outside

    ISAKMP identity address

    part of pre authentication ISAKMP policy 10

    encryption of ISAKMP policy 10

    ISAKMP policy 10 md5 hash

    10 2 ISAKMP policy group

    ISAKMP life duration strategy 10 86400

    vpngroup address vpnpool1 pool test

    vpngroup split tunnel 102 test

    vpngroup test 1800 idle time

    test vpngroup password *.

    It is generally preferable to use another range of IP addresses. The PIX will know that the VPN Client uses that vary and route it properly whitch is not the case when you are using the same IP range as the inside interface.

    To access another interface use the SHEEP (your ACL 102) access list which disables NAT between the VPN and the neworks to which you want to connect.

    Example of config:

    access-list allowed SHEEP Internalnet ISubnetMask VPN-pool 255.255.255.0 ip

    access-list allowed SHEEP DMZnet DMZSubnetMask VPN-pool 255.255.255.0 ip

    NAT (inside) 0 SHEEP

    AAA-server local LOCAL Protocol

    AAA authentication secure-http-client

    Permitted connection ipsec sysopt

    Crypto ipsec transform-set esp-3des esp-md5-hmac TRANS

    Crypto-map dynamic outside_dyn_map 20 game of transformation-TRANS

    card crypto 65535 REMOTE ipsec-isakmp dynamic outside_dyn_map

    REMOTE client authentication card crypto LOCAL

    interface card crypto remotely outside

    ISAKMP allows outside

    ISAKMP identity address

    ISAKMP nat-traversal 20

    part of pre authentication ISAKMP policy 10

    ISAKMP policy 10 3des encryption

    ISAKMP policy 10 md5 hash

    10 2 ISAKMP policy group

    ISAKMP life duration strategy 10 86400

    IP pool local VPNPool x.y.z.1 - x.y.z.254

    vpngroup VPNGroup address pool VPNPool

    vpngroup VPNGroup dns-server dns1 dns2

    vpngroup VPNGroup default-domain localdomain

    vpngroup idle 1800 VPNGroup-time

    vpngroup VPNGroup password grouppassword

    username, password vpnclient vpnclient-password

    sincerely

    Patrick

  • Blocking of the internal services of VPN and Proxy

    Hello

    I have some users with Windows 7 and MAC laptops inside my network domestic who is protected by the R7000.

    I'd like know if its possible to block sessions VPN and Proxy, initiated from these internal, to communicate with Internet computers.

    Thank you

    Try VPN Service to block.

Maybe you are looking for