VPN client using the certificate self-signed on SAA

Similar Questions

• Use the certificate self-signed on TS 2008R2

  Hello reader,.

  We use Firefox on a Terminal server with about 20 servers server farm environment.
  We use a lot of intranet sites for which we have the certificate self-signed by our domain controller.

  In Firefox users get prompt security sec_error_unknown_issuer. As much as I red that Firefox does not check for local free self-signed certificates.
  Is there a way we could set up for all users, they do not see the above error-> specific <-websites (intranet)?

  We do not want the users to add the Security (certificate) as exception 20 times for EACH intranet website on 20 servers dispute.
  It is something that I can edit in mozilla.cfg on each server or is there another solution?

  Thanks in advance,
  Kind regards
  Martijn

  I solved the problem with manual below:

  http://community.Spiceworks.com/how_to/15158-Firefox-trust-a-local-certificate-authority-for-all-users-and-computers

• See imprint SHA of the certificate self-signed client webvpn ASA?

  When connecting to an ASA with certificate self-signed, using Cisco AnyConnect Secure Mobility Client 3.1 (10010), the AnyConnect client presents the big red warning box, which is good.  The user must turn off "Block for unknown servers connections" in the preferences in order to complete the connection.

  Is it possible for the user to view the fingerprint SHA1/SHA3 cert self-signed, before disabling the safety block?  I could have sworn that older versions of the AnyConnect client allow the user view the certificate details and fingerprints before choosing to accept and connect.

  You can't make AnyConnect 3.x or 4.x as far as I know. Even a set of Diagnostics and Reporting Tool (DART) does not include this information.

  It is quite easy to inspect although if you simply browse to the ASA to almost any browser interface. From there, you can review the site certificate (ASA), including the footprint of the RSA public key.

• Authentication IPsec VPN Client using the digital certificate

  Hello

  Please I need some clarification and help to set up my ASA 5540 with IOS 8.3 x for client certificate authentication remote.

  I have my certificate root from the Microsoft CA, but not quite sure if the steps described in the following cisco Web sites are exactly what I need since the firewall seems to generate the certificate to use.

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080930f21.shtml

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a008073b12b.shtml

  My setup is such that the CA will issue certificates to remote clients and the ASA firewall, and remote clients will authenticate and connect with their certificates which the firewall is constantly updating using the Revocation list updated by the certification authority.

  The dhcp pool must be issued by the DC inside network and not on the firewall.

  Are there any examples or best practices to achieve steps will be really appreciated.

  Thank you

  Hi Josh,.

  Let me explain briefly how Auth PKI:

  In a public key infrastructure configuration, devices trust not each other directly, but they have a certification authority, which is the one who issues the certificate. We call this root CA (there may be a more complex configuration WHERE intermediate are involved, but that's another story). So when the root CA issues a certificate, he signs it with its private key. To be able to verify this signature, we should have the CA public key, which is included with the certification authority.

  So for certificate authentication, you must create a trustpoint, that defines the parameters of the root certification authority.

  Then you will authenticate this trustpoint, which basically means that you will get the certificate of the root CA and store locally.

  After that, you sign up to this CA, which means that you will ask for (and get) your own certificate.

  Other users will do the same and have the same root CA Cert, but different personal (identity) certificates.

  So what happens on authentication is that both ends send their certificate to the other, and they will use the public key contained in the root CA to validate the signature of the certificate received from the remote peer. If the signature is correct, this means that the certificate authority root actually issued the certificate, and this remote peer can be trusted (or not)

  Hope this is clear.

• How to match tunnel-group with auth ASA 8.2 and IPSec VPN Client using digital certificates with Microsoft CA

  Hello

  I set up a lab for RA VPN with a version of the ASA5510 8.2 and VPN Client 5 software using digital certificates with Microsoft CA on a Windows 2003 server. I did the configuration based on this document from Cisco's Web site:

  http://www.Cisco.com/en/us/partner/products/ps6120/products_configuration_example09186a0080930f21.shtml

  Now, the vpn works fine, but now I need to configure a tunnel-different groups so I can provide different services to different users. The problem I have now is that I don't know how to set it up for the certificate is the name of tunnel-group. If I do an ASA debug crypto isakmp I get this error message:

  % ASA-713906 7: IP = 165.98.139.12, trying to find the group through OR...
  % 3 ASA-713020: IP = 165.98.139.12, no group found by matching well payload ID: unknown
  % ASA-713906 7: IP = 165.98.139.12, trying to find the group via IKE ID...
  % 3 ASA-713020: IP = 165.98.139.12, no group found by matching well payload ID: unknown
  % ASA-713906 7: IP = 165.98.139.12, trying to find the group via IP ADDR...
  % ASA-713906 7: IP = 165.98.139.12, trying to find the group using default group...
  % ASA-713906 7: IP = 165.98.139.12, connection landed on tunnel_group DefaultRAGroup

  So, basically, when using certificates I connect always VPN RA only with the group default DefaultRAGroup. Do I have to use a model of different web registration for application for a certificate instead of the user model? How can I determine the OU on the user certificate so that match tunnel-group?

  Please help me!

  Kind regards

  Fernando Aguirre

  You can use the group certificate mapping feature to map to a specific group.

  This is the configuration for your reference guide:

  http://www.Cisco.com/en/us/partner/docs/security/ASA/asa82/configuration/guide/IKE.html#wp1053978

  And here is the command for "map of crypto ca certificate": reference

  http://www.Cisco.com/en/us/docs/security/ASA/asa80/command/reference/C5.html#wp2186685

  Hope that helps.

• ASA uses that certificates self-signed after upgrade to 9.4.1

  I came across a strange issue after upgrade to 9.4.1... (from 9.3)

  However I access the ASA (browser, Anyconnect, etc.), it offers only a self-signed certificate even if an appropriate SSL certificate installed.

  I checked:

  SSL-trust VPN_Portal_TP point
  SSL-trust outside VPN_Portal_TP point
  SSL certificate authentication CAF-timeout 5
  interface outside port 443 SSL certificate authentication

  is configured.

  • CA is installed, too.
  • Reinstalled all certififcates.
  • Reassign the Trustpoints

  Any ideas would be greatly appreciated... Thank you!

  I did have time to test this out on my laboratory unit yet, but there's a thread related here.

  I'm not positive on the standard resolution immediately - it will bring close watch.

  Perhaps the first person to prosecute TAC may share the resolution.

• Replace the certificate self-signed prominent 5.3

  Select a certificate:

  1 Subject: C = US, S = CA, L = CA, O = VMware Inc., unit of ORGANIZATION = VMware Inc., CN = VVVDCVDID03, [email protected]
  Valid from: 31/12/2013-15:56:35
  Valid until the: 31/12/2015-15:56:35
  Footprint: E93EDE1797C55BC61E95DF625AC33EC8D30DD089

  2 object: CN = .net, OR default certificate of VMware View = VVVDCVDID03.mydomain, O = "VMware, Inc.."
  Valid from: 12/30/2013 15:24:20
  Valid until the: 28/12/2023-15:24:20
  Footprint: 671E847CA3A55FC31AA62034174B29EC37D4DF38

  3 object: CN = * .mydomain .net, O is my company Holdings LLC, L = Grant Park, S = Illinois, C = US
  Valid from: 01/08/2014-19:00
  Valid until the: 14/01/2015-07:00
  Footprint: 1D976E97E9B9C55A02470F45618F7E2CD8763B43

  Enter the choice (0-3, 0 to abort): 3
  Remove the link to certificate successfully 18443 port.
  Bind the new certificate to the port.
  ReplaceCertificate successful operation.

  Yet the certificate still shows as invalid and self-signed view Admin and when I join on the site.  It's showing that ranked #2 in the SVICONFIG.

  In addition to this SVICONFIG does not appear to be installed facing the connection to the server at the point 5.3. Or at least I can't.  5.3 documents do not appear to exist. 5.2 only.

  How can I replace the self-signed certificate in my servers connection and security now?

  http://pubs.VMware.com/view-51/index.jsp?topic=%2Fcom.VMware.view.installation.doc%2FGUID-5ED2A8AB-0D5F-495F-B2F7-D7C64C7A021E.html

  http://pubs.VMware.com/view-51/index.jsp?topic=%2Fcom.VMware.view.installation.doc%2FGUID-5ED2A8AB-0D5F-495F-B2F7-D7C64C7A021E.html

  The solution in the end was that the self singing and new cert had the same friendly name of "vrm".  Changed the name of the car to "oldcert" sign and restarted the server connection.  That solved.

• How do I configure the iPad2 to synchronize the iPad-Mailclient with Exchange 2010 via Active Sync using the certificate SSL client and name of user and password?

  Active Sync iPad ssl Client certificate

  How do I configure the iPad2 to synchronize the iPad-Mailclient with Exchange 2010 via Active Sync using the certificate SSL client and name of user and password?

  Hi Ewoki,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the TechNet Exchange forum. Please post your question in the Forums TechNet in Exchange Server.

• 3.5.1 to 506th Pix VPN Client using IPsec over TCP

  Is it possible to do when there is a device in the path of the VPN tunnel that will make the static NAT?

  The reason is that the external interface of the Pix will have a private address, and it is the endpoint of the tunnel. The performance of NAT device has a public address, who thinks that the VPN client is the end of the tunnel, the static NAT will result the incoming packets on port UDP 500 for a destination of the Pix.

  Thank you.

  The Pix can not do TCP encapsulation. He can do UDP encapsulation.

  You can create IPSec tunnels to the external of the Pix even if address he addresses NATted provided that it is NOT of PAT and NAT.

• vSphere client using the name Netbios on ESXi host does not connect using the credentials of a Windows session

  I have 3 ESXi 5.5 hosts, all connected to a single server vCenter, where we try to authenticate directly to the host by using the windows logon credentials. I have installation of the Administrators group of ESX and filled with the admin accounts that I want to be able to authenticate to the host. The Netbios name of the domain is tstdomain (for example) where the domain name is tstdomain.com. If I connect directly to a host and check the checkbox 'Use Windows Session Credentials', the vSphere client will default by using the Netbios name of tstdomain\adminusername and the connection will fail indicating that the username and/or password is incorrect. If I enter the domain name of tstdomain.com\adminusername, I am able to connect to the host without error.

  Does anyone know how get past that this matter have the vSphere client uses the domain name or to use the Netbios name and connect with the credentials to active directory? I looked by editing the file/etc/hosts and checked that the SPN of the host is correct in active directory with the command hostname setspn - l, with no luck on one. I also tried to change the field of research for the Netbios name of tstdomain rather than the tstdomain.com domain name, also did not work.

  Thanks in advance for your suggestions on how to correct the problem.

  Seems that this issue was due to a slow network and the connection timeout when you try to talk to the domain controller. I am able to connect with windows creds now, but the connection is very slow. I increased the default period of 30 to 60 seconds to help work around the problem.

• When you modify a form in the DC or Pro Player I can enter text etc., save, close, and return later to change it. However, once I use the function "Fill &amp; Sign" and save the document, it locks the file and all other fields are not editable. Is there a

  Hi guys,.

  When you type information in a form in the DC or Pro Player I can enter text with fields of text etc and then save, close and return later to change the form. However once I use the function "Fill & Sign" to sign the document, and then save, it locks the file and all other fields become editable. Is there a way around this to remove this feature where it becomes locked and instead allows me to change the form after a signature is applied and saved. All the security properties of the form are on 'admitted', there is no restriction. Even though the document is locked all the properties remain still as 'authorized '.

  The signing is FINAL.  You cannot sign a PDF paper advance. Complete and save, do not sign.

• Is my client using the web browser editor can change the position of text and images, the site was built with muse

  Is my client using the web browser editor can change the position of text and images, the site was built with muse and at first, tell him that he could change the text and images, but he can't change the location of contents of Th.

  Now he wants to paste and copy directly from the web browser Publisher Word and wants to change all of the place itself.

  Does someone have an answer or another solution?

  Philippe

  First of all, to answer your question about moving content. No, that is not supported.

  Then, never advised him to stick to Word what for the web. Word adds a lot of very strange code that can break your page completely. Tell him if he has a Word to add to the site to paste into Notepad or any other text editor, copy and paste to Muse.

• Certificate self-signed for remote VPN CLIENT access

  Hi people,

  I am trying to achieve two-factor authentication, first with RADIUS & 2nd with self-signed certificate. If I generated of self-signed certificate & trying to import this certificate but error 39 that occur. Only obstacle that authenticate with certificate. I saw some documents for separate setting certifcate servers (CA) & then to import in the clients but I m curious about a certificate automatically generated can be used to authenticate the remote access client.

  ASA additional server failover mode is Local CA is not supported. Is there a way to support local CA.

  Thank you

  Are you talking about using self-signed client certificates? I guess that it will not work. At least it is not scalable. You must use an internal CA for this task. As the local certification authority cannot be used with failover, you can take a Windows Server 2 k 3 or 2 k 8. Another option is to use a router IOS as CA-server. But what take something else as a second factor? I'm a big fan of the use of smartphones with the www.duosecurity.com service.

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• Unable to connect to SMTP using TLS with a certificate self-signed on OSX 10.10.1 (T31.3 &amp; 24.6)

  I can't connect to my server SMTP with TLS on port (send 465 or 587 / 995 receive) using Thunderbird 31.3 or my OS X 10.10.1 24.6 (Didier) MacBook Pro.

  However, I am able to send and receive mail from the same account on my Windows 7 machine using Outlook 2007, using the same settings I configured in Thunderbird. I added the certificate etc.

  http://img.Photobucket.com/albums/v631/Napoleon_BlownApart/ScreenShot2014-12-16at121323pm.PNG (Taken when using 24.6)

  I am the admin of the server and the password and other settings on the side Server are correct! (I'll take a look at the evolution at the same time. I am already back to an earlier version of Firefox because of sloppy coding and broken features).

  Any ideas?

  If the server name is a secret, how you expect to receive mail. Please, we have pretty bad without guessing. Seriously what you are done using a self signed certificate, they are free by https://www.startssl.com/

  My guess is it of OSX who dislikes the self-signed certificate, how Thunderbird to deal with Windows. As you have a copy install Thunderbird and see if it is a question of OSX.

• Looking for input on the replacement of certificates self-signed

  After many hours trying to find an answer, I now turn to the experts for assistance here.  I have Setup initially vcloud with a self-signed certificate and I am looking for help.  After some research, I was able to create a new key file with my CA-signed certificate.  However, I have problems beyond the portion of reconfigure.

  First off I am struck by the: 1433 bug I had when I initially configure vcloud where the configure script does not pick up the port number.  The workaround for this is to add: 1433 to the host name as it the entrance as the port number.  Now that I'm gone, I get an error NewInstall_preInit sql.  I don't understand not even why I need a "newInstall" as I already have a database works.  Here is my command output, maybe one of the guru here can point me in the right direction.

  [root@vcloud bin] # cd/opt/vmware/vcloud-director/bin/configure
  Welcome to the vCloud Director configuration utility.
  You will be asked to enter a number of parameters which are necessary for
  Configure and start the vCloud Director service.
  Please enter the path to the keystore of Java that contains your SSL certificates and
  private key: /opt/vmware/vcloud-director/cert.ks
  Please enter the password for the key file:
  Please enter the password for the private key for the certificate of "http":
  Please enter the password for the private key for the certificate of "consoleproxy":
  The following data types are supported:
  1 oracle
  2 Microsoft SQL Server
  Enter the type of database [default = 1]: 2
  Enter the host (or IP address) to the database: vmgmt1:1433
  Enter the database [Default = 1433] port: 1433
  Enter the name of the database [default = vcloud]: vcloud
  Enter the name of the instance [default = MSSQLSERVER]: vcloud
  Enter the database user name: his
  Enter the database password:
  Connection to the database: jdbc:jtds:sqlserver://vmgmt1:1433:1433 / vcloud; socketTimeout = 90; instance = vcloud
  loading /opt/vmware/vcloud-director/db/mssql/NewInstall_PreInit.sql
  [2 reports]
  Execution of SQL query error: ' IF ((SELECT is_read_committed_snapshot_on FROM sys.databases WHERE database_id = DB_ID()) <>1).
  BEGIN
  DECLARE @sql varchar (8000)
  SELECT @sql = '
  ALTER DATABASE ' ' + DB_NAME() + ' ' SET SINGLE_USER WITH IMMEDIATE RESTORATION.
  ALTER DATABASE ' ' + DB_NAME() + ' "ALLOW_SNAPSHOT_ISOLATION DEFINED;
  ALTER DATABASE ' ' + DB_NAME() + ' ' SET READ_COMMITTED_SNAPSHOT ON WITH NO_WAIT;
  ALTER DATABASE ' ' + DB_NAME() + ' ' SET MULTI_USER;
  '
  Exec (@SQL)
  END '.
  java.sql.SQLException: Option "SINGLE_USER" cannot be defined in database 'master '.
  at net.sourceforge.jtds.jdbc.SQLDiagnostic.addDiagnostic(SQLDiagnostic.java:368)
  at net.sourceforge.jtds.jdbc.TdsCore.tdsErrorToken(TdsCore.java:2816)
  at net.sourceforge.jtds.jdbc.TdsCore.nextToken(TdsCore.java:2254)
  at net.sourceforge.jtds.jdbc.TdsCore.getMoreResults(TdsCore.java:636)
  at net.sourceforge.jtds.jdbc.JtdsStatement.processResults(JtdsStatement.java:584)
  at net.sourceforge.jtds.jdbc.JtdsStatement.executeSQL(JtdsStatement.java:546)
  at net.sourceforge.jtds.jdbc.JtdsStatement.executeImpl(JtdsStatement.java:723)
  at net.sourceforge.jtds.jdbc.JtdsStatement.execute(JtdsStatement.java:1157)
  at com.vmware.vcloud.configure.Db.executeSqlBatch(Db.java:231)
  at com.vmware.vcloud.configure.Db.executeSqlScript(Db.java:190)
  at com.vmware.vcloud.configure.Db.createTables(Db.java:142)
  at com.vmware.vcloud.configure.Db.maybeInitialize(Db.java:301)
  at com.vmware.vcloud.configure.ConfigAgent.configureDatabase(ConfigAgent.java:1631)
  at com.vmware.vcloud.configure.ConfigAgent.start(ConfigAgent.java:396)
  at com.vmware.vcloud.configure.ConfigAgent.main(ConfigAgent.java:295)
  Communication with the database error: Option SINGLE_USER cannot be defined in the master database.

  Just a stab in the dark - the guides call say use a user for vcloud (named: vcloud) not "its".

  Our vcloud database user login has a default instance of the vcloud database.  Maybe this will get around the question (seems to me that THE default connection is master - and before the change of the "vcloud" database scripts he tries to put in single-user mode.