VPN connection settings

Similar Questions

• Add a vpn connection in ios 10, method chosen in IKEv2, but I don't have the remote ID. My VPN is created in Sonicwall

  Add a vpn connection in ios 10, method chosen in IKEv2, but I don't have the remote ID. My VPN is created in Sonicwall, waiting for quick reply

  Hi cmscan,

  Thank you for using communities of Apple Support.

  I see that you add a VPN connection using IKEv2, but you do not have the remote ID. I know it's important to be able to set up a virtual private network, you can connect using your iPhone. I'm happy to help you with this.

  You must contact your system administrator to ensure that the settings that you must configure the VPN connection. Please see the iPhone user Guide for more information.

  Have a great day!

• Mac OS El Capitan cannot share a VPN connection that is type of IKEv2

  I have a few VPN connections, I share via Wi - Fi on my mobile device. Here's what I do:

  I have a Macbook Pro with Ethernet port, I have some work VPN connections (some type of IPSec, some IKEv2). First I plug the cable to the Ethernet port, then I start a VPN (settings-> network-> Connect) connection, finally, I share the VPN (settings-> sharing-> Internet sharing) via Wi - Fi connection so that my mobile device can connect and use the VPN connection.

  This work really well for me with IPSec VPN connections. But today, I tried to switch to an IKEv2 VPN connection, the VPN works well, but I can't share it on a mobile device via Wi - Fi, because I couldn't see the connection in the list "share your connection from" (Preferences-> sharing-> Internet sharing system)

  Are there any technical problem that IKEv2 cannot be shared? Or is there that all parameters must be made so that all VPN connections must appear in the list to share?

  evpn https://support.purevpn.com/IKEv2-Configuration-Guide-for-OS-x-El-Capitan-by-pur

• VPN connection: An unexpected error has occurred.

  I am suddenly unable to get my built-in VPN connection works on my iMac with OS X 10.11.5.  I get the VPN connection message: an unexpected error has occurred.  I have been using this VPN configuration to connect to work for several months with success.

  But last week (and I do not know if it had nothing to do with it), I went on vacation and used a free wi - fi setup of Tim Hortons.  I had a LOT of trouble getting the next login page, and I checked all playing with different settings of network without success.  When a change did not work, I put it to its original setting.  Finally, I learned to use Safari to access the free WiFi connection page of Tim.  Then once connected, everything was OK.

  But when I returned a week later and if necessary, to start my VPN connection to access the work, it wouldn't start.  I checked and recheck all my settings preferably of different network, but did not find those who were wrong.  I even deleted and re-entered my VPN service definition without solving the problem.

  Thinking that the problem could be the newly installed ISP of Bell equipment (we went from Rogers while I was away), I used my BlackBerry smartphone (issued by my employer) to create a wi - fi hotspot and accessed to the internet using this connection which completely ignored my home ISP equipment.  But still, I was unable to establish a VPN connection.

  I then tried my iPad VPN connection, and it worked!  Then, I defined a VPN service on the iMac to my wife and the iMac to my daughter and was able to successfully establish a VPN connection to my work very well, using exactly the same VPN configuration.  This led me to the conclusion, it was a problem on my iMac (and not with my new ISP or VPN system of my work that had none of the changes you made), but I still can't find what is "broken".  I run Onyx for my iMac OS X 10.11.5 and repaired permissions and clean the cache and all the rest she is doing to "solve" problems.  But the problem persisted.

  Is there a preference file corrupted somewhere (scan option is no longer on the current version of the Onyx for a reason any)?

  I still have a network setting wrong somewhere I need to go back to the system is correct value?

  Here is the attempt to VPN from the file system.log (with some hidden values in the case where they display my work VPN access):

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: received an order to start SystemUIServer [257]

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: changed to connecting status

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: IPSec connection to server nnn.nnn.n.n

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: phase 1 of the IPSec from.

  26 June at 16:13:48 Myrons-iMac raccoon [520]: agreed to the takeover of vpn connection.

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IPSec connection to server nnn.nnn.n.n

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: connection.

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IPSec Phase 1 started (initiated by me).

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: bind 1 (cannot assign requested address)

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: sendfromto failed

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: Phase 1 negotiation failed due to the error of sending. 94437eb7d5b1b6e8:0000000000000000

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: can not send packets

  26 June at 16:13:48 - last message repeated 1 time-

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IKE Packet: send failed. (Initiator, aggressive Mode 1 Message).

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: Controller IPSec: IKE FAILED. Phase 1, assert 0

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: status changed by disconnecting

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: IPSec disconnection from the server 142.201.5.6

  26 June at 16:13:48 Myrons-iMac raccoon [520]: IPSec disconnection from the server nnn.nnn.n.n

  26 June at 16:13:48 - last message repeated 3 times-

  26 June at 16:13:48 Myrons-iMac nesessionmanager [439]: NESMLegacySession [VPN works: 295091E5-xxxx-4B6A-xxxx-F7A7xxxxxxAA]: status changed to offline, terminus right no

  Any help or insight would be more useful and appreciated... so that I can work from home again.

  Thank you

  Myron VanderLaan

  I finally found my VPN problem.

  There is a 'racoon' file that is generated when I connect to the VPN to my work site.

  I have created a modified version of this file so that my connection does not expire in 3600 seconds (changed in 24 hours).

  Apparently, there are some slightly different settings (such as certain IP addresses other than VPN IP of my work) in this file under our new ISP Bell from the former FAI Rogers.

  And if I connect to the WiFi Hotspot from my BlackBerry, it does not once again because these settings in the file are different again.  I must return the file generated instead of my modified file.

  Bad luck!

• How to create vpn with vista home premium on basis of vpn xp settings?

  I can connect to the vpn with xp machine, but when I try to imitate xp setting with machine to vista Home premium I can't connect to the same vpn. What do you suggest me?

  How to create a vpn connection in Vista: http://techrepublic.com.com/2346-1035_11-61437-1.html?tag=content;leftCol.  NOTE: I don't know what you mean "based" vpn xp settings, but you will have to do the best you can with the options and settings available in Vista (that I n "' t know how they compare to XP, but I hope that you will be able to do so because).

  Here is another article on the procedure: http://www.publicvpn.com/support/Vista.php.

  Here is an article on how configure a VPN with an ISP in Vista: http://www.web-articles.info/e/a/title/How-to-create-a-VPN-connection-over-your-ISP-connection/.

  Here is an article with a number of different other items all on vpn in Vista (I don't know exactly what type of configuration you "AVIC - as a host, as a customer, on what type of connection,--but this article covers many different aspects and I hope that at least a couple will be a help for you: http://compnetworking.about.com/od/vpnsetup/VPN_Setup_How_to_Set_Up_a_VPN.htm.)

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• BlackBerry 10 auto-configuration VPN connection on Wifi networks

  Dear all

  Soon-to-be owner of a Z10, I try to have a smooth start once it arrives. How would I go about establishing an automatic VPN connection to connect to certain Wifi (public, non-free)? Is it still possible?

  The VPN connection offer me free access to these networks, but it is quite annoying to always have to manually open the VPN when one of them is in scope.

  Thank you, Florian

  Hi floriparate and welcome to the community of BlackBerry Support Forums!

  Settings > network connections > Wi - Fi > saved, select the saved network and then add the VPN profile to configure auto-connect when it is connected to this network.

  This article will provide more information on the creation of a VPN on your BlackBerry Z10 profile.

  KB13469 - setting up a VPN profile on the BlackBerry smartphone

  Thank you.

• RV180 VPN connects and allows you to browse the files, but falls when opening a file.

  Last week, we received our 300Mbps fiber connection. We bought the RV180 due to its high performance, and he manages the speed perfectly.

  However, when you set up VPN, I encountered a strange problem.

  Establishing a QuickVpn or PPTP is simple and connection is no problem. But I'll be fine. I can communicate with QuickVpn or PPTP and find a NAS or PC directory structure, but when I try to open a file the VPC connection drops.

  I activate the remote management.
  I can ping google.com f-l 1472 without fragmentation, so a WAN MTU of 1500 should be ok.
  I have tried disabling attack prevention firewall.

  I have install the following experience: the firmware update (1.0.2.6), restore the default settings.

  Set up the RV180 as follows:

  IPv4 WAN (Internet)

  ------------------------------------------------------------------

  Internet connection type: Automatic Configuration - DHCP

  DNS Server Source: Get dynamically for ISP

  MAC address of the router: use the default address

  IPv4 LAN (local area network)

  ------------------------------------------------------------------

  Host name: RV180

  IP address: 192.168.75.1

  Subnet mask: 255.255.255.0

  Mode DHCP: DHCP Server

  Domain name: LCDVT

  From the IP address: 192.168.75.100

  End IP address: 192.168.75.254

  Rental time: 24

  DNS Proxy: enable

  Preventing attacks

  ------------------------------------------------------------------

  WAN (Internet) security controls

  Meet Ping on WAN (Internet): disabled

  Stealth mode: disabled

  Floods: disabled

  LAN (local area network) security controls

  Block UDP Flood: disabled

  Parameters of the ICSA

  Block the anonymous ICMP Messages: disabled

  Block fragmented packets: disabled

  Block multicast packets: disabled

  VPN users

  ------------------------------------------------------------------

  PPTP server: enabled

  From the IP address: 192.168.75.50

  End IP address: 192.168.75.99

  Table setting VPN Client:

  ---------------------------

  No: 1

  Enabled: enabled

  Username: lcdvt

  Password: *.

  Allow the user to change the password: NA

  Protocol: PPTP

  Web access

  ------------------------------------------------------------------

  Access on the LAN of HTTPS Web Interface: enabled

  Remote management: enabled

  Type of access: IP range

  Start of range: 192.168.75.1

  End of series: 192.168.75.254

  Port number: 443

  Remote SNMP: disabled

  The rest of the menu options are, except for logging policies where I have everything turned on by default.

  In this experiment, I connect from a remote location, start navigating among directories of the drive without any problems and then open a file, after which the VPN connection falls (or some process breaks down). After the transfer of a few 100 KB blocks the VPN connection.

  Error logs

  ------------------------------------------------------------------

  Thu Mar 20 00:39:18 2013(GMT+0100) [rv180] nimfNetIfaceTblHandler [System] [NIMF]: could not get LedPinId

  Thu Mar 20 00:39:25 2013(GMT+0100) [rv180] [System] [PROGRAM] IP: 62.45.238.236

  Thu Mar 20 00:39:25 2013(GMT+0100) [rv180] [System] [PROGRAM] BCAST: 62.45.239.255

  Thu Mar 20 00:39:25 2013(GMT+0100) [rv180] [System] [PROGRAM] subnet: 255.255.254.0

  Thu Mar 20 00:39:25 2013(GMT+0100) [rv180] [System] [PROGRAM] GW: 62.45.238.1

  Thu Mar 20 00:39:25 2013(GMT+0100) [rv180] [System] [PROGRAM] DNS1: 62.45.45.45

  Thu Mar 20 00:39:25 2013(GMT+0100) [rv180] [System] [PROGRAM] DNS2: 62.45.46.46

  Thu Mar 20 00:39:25 2013 (GMT + 0100) [rv180] [System] [PROGRAM] Interface: eth1

  Thu Mar 20 00:39:32 2013(GMT+0100) [rv180] nimfNetIfaceTblHandler [System] [NIMF]: could not get LedPinId

  Thu Mar 20 00:40:58 2013(GMT+0100) [rv180] nimfNetIfaceTblHandler [System] [NIMF]: could not get LedPinId

  Thu Mar 20 00:41:10 2013(GMT+0100) [rv180] [System] [PROGRAM] IP: 62.45.238.236

  Thu Mar 20 00:41:10 2013(GMT+0100) [rv180] [System] [PROGRAM] BCAST: 62.45.239.255

  Thu Mar 20 00:41:10 2013(GMT+0100) [rv180] [System] [PROGRAM] subnet: 255.255.254.0

  Thu Mar 20 00:41:10 2013(GMT+0100) [rv180] [System] [PROGRAM] GW: 62.45.238.1

  Thu Mar 20 00:41:10 2013(GMT+0100) [rv180] [System] [PROGRAM] DNS1: 62.45.45.45

  Thu Mar 20 00:41:10 2013(GMT+0100) [rv180] [System] [PROGRAM] DNS2: 62.45.46.46

  Thu Mar 20 00:41:10 2013 (GMT + 0100) [rv180] [System] [PROGRAM] Interface: eth1

  Thu Mar 20 00:41:19 2013(GMT+0100) [rv180] nimfNetIfaceTblHandler [System] [NIMF]: could not get LedPinId

  Warning logs

  ------------------------------------------------------------------

  Thu Mar 20 00:39:13 2013(GMT+0100) [rv180] [System] [DHCPC] dhcpcDisable: removed dhclient.leases

  Thu Mar 20 00:40:54 2013(GMT+0100) [rv180] [System] [DHCPC] dhcpcDisable: removed dhclient.leases

  Sat 1 Jan 01:02:43 2011 (GMT + 0100) [rv180] [Kernel] [KERNEL] [23.090000] /home/aruns/rv180w/updated_dec19_final/beta-v1/rv180w-common/comps/gpl/ipset/src/ipset/kernel/ip_set.c: ip_set_create: no type set 'nethash', 'setPublicNet' has not created value

  What I am doing wrong? Or the device?

  I am interested in what the solution to these problems.  Research on get a rv180...

  First car of Huntsville and bike e-magazine: www.huntsvillecarscene.com

• I have created a VPN connection and it worked but you can't see how to remove Windows 7.

  Delete the VPN connection

  I have created a VPN connection and it worked but you can't see how to remove Windows 7.  I tried rt-click but no delete option.

  Open network and sharing Center. On the left side, click on change adapter settings. You will get all VPN connections that have been created and you can delete what you don't need.

• Disable ipsec for l2tp vpn connection?

  Hello

  How can I disable ipsec for l2tp vpn connection? I use a linux vpn that offers only l2tp. I remember doing this with winxp in regedit.

  [HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Services/RasMan/settings] "ProhibitIpSec" = DWORD: 00000001

  How is it possible in win7?

  Thank you.

  Thank you for visiting the Microsoft answers community site. The question you have posted is related to Linux and would be better suited to the community network. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• RV042 VPN connection issues

  Hello

  I've successfully connected two RV042s to establish a VPN gateway to connect to a VPN gateway. I have follow up questions, please comment:

  1. I want to keep the time of indefinite VPN tunnel connection. Is it enough by ticking the 'Keep-Alive' on the VPN-> gateway-to-gateway-> page in advance? Or, I ping the RV042 periodically?

  2. the "Phase 1/Phase 2 times of HIS life" (on-> page from gateway to gateway VPN) settings have no impact on the maintenance of indefinite time of VPN connection? What are the optimal values for them?

  3. is there an API, command or a script to replace a manual by clicking on the button "CONNECT" to establish the VPN to VPN tunnel-> summary page? Or, is there a way to achieve the power upward?

  4. is there a way to establish a VPN tunnel bypassing the connection and clicking on the button "CONNECT"? (Auto connect to power up)?

  Thank you in advance for the comments.

  Steve

  Hello Stephen

  I have a question as well. We have a RV042 that does not restore the connection

  unless we hit the Connect button. Then everything is fine - after a while he gave up the connection

  Yet once and we have to connect and log in again

  Still having the problem?

  Mike

• I created a vpn connection, but can I create a shortcut to connect every time?

  I created a vpn connection, but can I create a shortcut to connect every time?

  I created a vpn connection, but can I create a shortcut to connect every time?

  Open network and sharing Center, go to the Edit card settings window and drag the VPN icon on your desktop.

• VPN connection error - pppd limited

  Hi I think I have a problem with OX, the captain and the networks, I sail perfectly with the team but since update stops running the VPN, I tried the possibility to go to recovery mode to 'disable csrutil' then ' sudo chmod u + s / usr / sbin / pppd "but it does not work when you use Netextender or FortiClient." I have another Mac with Lion and works properly the only difference I notice in the file 'pppd' Captain makes me 'limited, compressed' and only 'compressed' Lion I put a photo and a newspaper of netextender:

  15/09/2016 10:15:59.271 [603 General info] NetExtender 8.1.788 for Mac OS X initialized

  15/09/2016 path of the bundle app NetExtender 10:15:59.299 [General info 603] = /Applications/NetExtender.app

  15/09/2016 createLogPanel() 10:16:01.045 [gui info 603]

  15/09/2016 10:16:01.730 [config info 603] loading saved profiles...

  15/09/2016 10:16:16.507 [connect info 603] user: "prueba".

  15/09/2016 10:16:16.507 [connect info 603] domain: "abcd.hos."

  15/09/2016 10:16:16.509 [connect info 603] Server: 'vpn.abcd.es:444 '.

  15/09/2016 10:16:16.581 [603 general notice] connection to vpn.abcd.es:444...

  15/09/2016 10:16:16.820 [General error 603] ERROR: SSL_connect: Undefined error: 0 (0)

  15/09/2016 10:16:16.821 [General notice 603] retry...

  15/09/2016 10:16:16.822 [General error 603] ERROR: SSL_connect: Undefined error: 0 (0)

  15/09/2016 10:16:16.823 [General error 603] authentication failed: connection failed. See the log for more details.

  15/09/2016 10:16:16.823 [General error 603] NetExtender connection failed.

  15/09/2016 10:16:16.823 [General notice 603] SSL VPN disconnect...

  15/09/2016 10:16:17.058 [General error 603] ERROR: SSL_connect: Undefined error: 0 (0)

  15/09/2016 10:16:17.058 [General notice 603] retry...

  15/09/2016 10:16:17.060 [General error 603] ERROR: SSL_connect: Undefined error: 0 (0)

  15/09/2016 10:16:17.061 [General error 603] disconnect command failed

  15/09/2016 10:16:17.063 [General notice 603] SSL VPN connection is completed.

  15/09/2016 10:16:17.063 [config info 603] loading saved profiles...

  15/09/2016 10:16:17.065 [gui info 603] connection failed. See the log for more details.

  

  I think that the problem is a network file or because I put the wrong password and I cannot detect this error. as I said the VPN working properly with another MAC using the same network.

  Help...

  You shouldn't be messing with the security features of the operating system.

  Problems may have to do with the network, or client software that you use.

  I start by making sure all the software are updated and then create a new entry, vpn, double control system that everything has been entered correctly.

  FWIW, I use the built-in features of VPN on El Capitan to connect to my University regularly and without problem.

  I'm not familiar with "Fortinet", and I suspect that you may need to be updated, or simply use the built-in VPN.

• Connection settings are greyed out - cannot set the proxy.

  In my role, I'm running Win 7 images from an outside source, change them to our org and create new images to our specifications. Recently, I received a new image of the provider. They forced THE 10 on the image, so the tool IEM that I previously used to define proxies no longer exists. My client needs Firefox as default browser. When I try to configure the proxy settings in the connection settings page, all items are grayed out. Topic: config watch network.proxy.type is (0) and locks. I modified prefs.js a different value, but it never works. I think there was a registry or group policy that prevents this from working. Any ideas? Thank you, in advance.

  Hello, you might try to check if the settings are locked as described in this article: http://kb.mozillazine.org/Locking_preferences

• Cannot change connection settings

  Firefox 34.0 (Waterfox actually) after the new update doesn't let me save the connection settings. The radio of the proxy used to be on no proxy; I deleted prefs.js and now it is stuck on the proxy for the use system settings. Now the no proxy for field is filled for localhost and 127.0.0.1 and I cannot click OK if I enter the manual configuration of the proxy. Safe mode does not work.

  solved: https://www.waterfoxproject.org/fullnews/74.html

• It is a way to password protect the Panel options of access, including the connection settings?

  Is there a way that access to the Options panel can be locked by an administrator. In particular, I would like to block a user to change the proxy settings in tools > Options > advanced > network > connection settings. I would like to be able to lock the settings to (use the system proxy settings). The OS is windows 7 standard user account controlled by a small business to windows 2008 Server.

  If you get the α error reading failure then it means that there is a problem with the file to mozilla.cfg or Firefox can't find the file that you may have created mozilla.cfg.txt where you saved the file as a text file (check the type in the properties using the context menu to see if it is a CFG file).
  
  The mozilla.cfg file must be in the main folder of the Firefox program where also the firefox.exe file is located.

  You should have at least two lines in mozilla.cfg.
  
  The first line must always be a comment (/ /) because this line is ignored.
  
  The pref value depends on what you want to use for the connection parameters for the use of the system use 5 proxy settings.

  //
  lockPref("network.proxy.type", 5);