VPN problem when local lan IP is IP LAN Corp.

Similar Questions

• VPN Local lan access

  I have set up a cisco 861 as a vpn server. Could I help you if someone can tell what is the problem? Clients can connect, but cannot access local resources from lan for subnet 10.0.10.0

  Building configuration...

  Current configuration: 9770 bytes
  !
  version 12.4
  no service button
  tcp KeepAlive-component snap-in service
  a tcp-KeepAlive-quick service
  horodateurs service debug datetime msec localtime

  Show time-zone
  Log service timestamps datetime localtime show msec.

  time zone
  encryption password service
  sequence numbers service
  !
  hostname RT861W
  !
  boot-start-marker
  start the flash c860-universalk9 - mz.124 - 24.T3.bin system
  boot-end-marker
  !
  forest-meter operation of syslog messages
  logging buffered 4096 warnings
  recording console critical
  enable secret 5 xxxxxxxx
  !
  AAA new-model
  !
  !
  AAA authentication login default local
  AAA authentication login userauthen local
  AAA authorization groupauthor LAN
  !
  !
  AAA - the id of the joint session
  iomem 10 memory size
  clock timezone IS - 4
  clock save interval 24
  !
  Crypto pki trustpoint TP-self-signed-3796206546
  enrollment selfsigned
  name of the object cn = IOS-Self-signed-certificate-

  3796206546
  revocation checking no
  rsakeypair TP-self-signed-3796206546
  !
  !
  chain pki crypto TP-self-signed certificates.

  3796206546
  certificate self-signed 01
  30820259 308201 2 A0030201 02020101 300 D 0609

  2A 864886 F70D0101 04050030
  2 060355 04031326 494F532D 53656 C 66 31312F30

  2 536967 6E65642D 43657274
  69666963 33373936 32303635 6174652D 3436301E

  170 3130 30363130 32323534
  33395A 17 0D 323030 31303130 30303030 305A 3031

  06035504 03132649 312F302D
  65642 43 65727469 5369676E 656C662D 4F532D53

  66696361 74652 33 37393632
  3630819F 30363534 300 D 0609 2A 864886 F70D0101

  01050003 818 0030 81890281
  81009C 68 0509FEBA BA0D4251 52AA3F1C DBB7CACB

  138D0D3D 8017AB75 04AABD97
  16DE7A44 31B18A6C 5DE8F289 CF5D71EA AF9BA2F6

  EB32858B 4385DE6C 3ED11616
  2B997D14 C6C86431 9A 956161 2D0581F4 767D60E1

  82FF426A 911D503E 8995A69B
  6F7A4D9A 9AEA14DE 8A62570E C9C3A913 25E5E464

  E6DA7E06 44F94B16 3EA57809
  5B 710203 010001 HAS 3 8180307E 300F0603 551D 1301

  01FF0405 FF302B06 30030101
  11 04243022 82205254 38363157 2E636F6C 03551D

  6C696E73 2E316661 6D696C79
  756E6974 65642E63 6F6D301F 0603551D 23041830

  1680142C 21E7314B D28AFE1A
  26115A1B F53AFB03 1 060355 1D0E0416 0ED1A830

  04142C 21 E7314BD2 8AFE1A26
  115A1BF5 3AFB030E D1A8300D A 06092, 86 4886F70D

  01010405 00038181 008CC48F
  6A1BFB52 0F268B05 B977AE8E CA450936 8272 D 889

  B46DE9FB 5680782C 59DA2354
  04CE6AD2 F280FB20 32B3897B CF0919F9 C0719F22

  C7BED922 73C35C32 54696F37
  89E424C2 561FFF54 99573AC6 713E58D8 E3B67064

  295 4331 845FCDEC F6CD8017 D
  58006 58 F94A8771 78217788 FE63AA11 0E5DF6B1

  1A8D0111 CDD87A1D CC
  quit smoking
  no ip source route
  no ip free-arps
  chip-Relay IP dhcp
  ignore the IP dhcp bootp
  DHCP excluded-address IP 10.0.1.1 10.0.1.10
  DHCP excluded-address IP 10.0.10.1 10.0.10.10
  !
  dhcp VLAN_10 IP pool
  Network 10.0.10.0 255.255.255.224
  router by default - 10.0.10.1
  Domain xxxxxx
  10.0.10.1 DNS server
  !
  dhcp VLAN_1 IP pool
  Network 10.0.1.0 255.255.255.224
  default router 10.0.1.1
  Domain xxxxxx
  10.0.1.1 DNS server
  !
  !
  IP cef
  inspect the IP log drop-pkt
  IP inspect high 1100 max-incomplete
  IP inspect 1100 max-incomplete bass
  IP inspect a high minute 1100
  IP inspect a minute low 1100
  inspect the IP udp idle time 60
  inspect the IP dns-timeout 10
  inspect the name firewall tcp timeout IP 3600
  inspect the name firewall udp timeout 15 IP
  inspect the name firewall ftp queue time 3600 IP
  inspect the name firewall rcmd timeout IP 3600
  IP inspect alert firewall smtp name on timeout 3600
  inspect the name firewall sqlnet timeout IP 3600
  inspect the IP name firewall tftp timeout 30
  inspect the name firewall icmp time 15 IP
  inspect the name firewall ssh timeout 15 IP
  IP inspect name Connection Firewall audit trail on
  inspect the name webster firewall IP
  IP inspect skinny firewall name
  inspect the router IP firewall name
  inspect the IP firewall cifs name
  inspect the name cuseeme firewall IP
  IP inspect the dns name of the firewall
  inspect the name realaudio firewall IP
  inspect the name firewall rtsp IP
  inspect the name streamworks firewall IP
  inspect the name vdolive firewall IP
  inspect the IP sip firewall name
  inspect the name firewall pop3 alert on reset IP
  inspect the name ftps firewall IP
  inspect the name isakmp firewall IP
  inspect the IP name of firewall ipsec-msft
  inspect the name ntp FIREWALL IP
  inspect the IP name firewall imap
  inspect the name imaps firewall IP
  inspect the name imap3 FIREWALL IP
  inspect the name pop3s firewall IP
  no ip bootp Server
  IP domain name xxxxxxxxx
  8.8.8.8 IP name-server
  IP-server names 8.8.4.4
  name-server IP 208.67.222.222
  IP-server names 208.67.220.220
  name of the IP-server 74.128.19.102
  name of the IP-server 74.128.17.114
  !
  !
  notify licensing agent

  http://10.0.10.11:9710 / clm/servlet/HttpListenServlet

  dummy dummy 2.0
  !
  !
  username privilege 15 secret 5 xxxx xxxxxx
  username xxxxx xxxxx secret 5
  !
  !
  crypto ISAKMP policy 3
  BA aes 256
  preshared authentication
  Group 2
  ISAKMP crypto nat keepalive 3600
  !
  ISAKMP crypto client configuration group xxxxx
  key xxxxxx
  DNS 10.0.10.5
  domain xxxxxxxx
  pool vpnpool
  include-local-lan
  netmask 255.255.255.224
  !
  !
  Crypto ipsec transform-set esp esp - aes 256 RIGHT-

  model of hmac-SHA-lzs
  !
  Crypto-map dynamic dynmap 10
  Set transform-set RIGHT
  market arriere-route
  !
  !
  list of card crypto clientmap client authentication

  userauthen
  card crypto clientmap isakmp authorization list

  groupauthor
  client configuration address map clientmap crypto

  initiate
  client configuration address map clientmap crypto

  answer
  10 ipsec-isakmp crypto map clientmap Dynamics dynmap
  !
  Crypto ctcp port 6000
  Archives
  The config log
  hidekeys
  !
  !
  synwait-time of tcp IP 10
  property intellectual ssh time 60
  property intellectual ssh authentication-2 retries
  Bridge IRB
  !
  !
  !
  interface Loopback0
  IP 10.100.100.1 255.255.255.0
  IP nat inside
  IP virtual-reassembly
  !
  Null0 interface
  no ip unreachable
  !
  interface FastEthernet0
  switchport access vlan 10
  !
  interface FastEthernet1
  switchport access vlan 10
  !
  interface FastEthernet2
  switchport access vlan 10
  !
  interface FastEthernet3
  switchport access vlan 10
  switchport mode trunk
  !
  interface FastEthernet4
  WAN description $ FW_OUTSIDE$
  address IP dhcp client id FastEthernet4
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  penetration of the IP stream
  stream IP output
  inspect the firewall on IP
  NAT outside IP
  IP virtual-reassembly
  automatic duplex
  automatic speed
  clientmap card crypto
  !
  wlan-ap0 interface
  description of the Service interface module to manage the

  Embedded AP
  IP unnumbered Vlan1
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  penetration of the IP stream
  IP virtual-reassembly
  ARP timeout 0
  !
  interface GigabitEthernet0 Wlan
  description of the Service interface module to manage the

  Embedded AP
  switchport mode trunk
  !
  interface Vlan1
  VLAN_1 description $ FW_INSIDE$
  IP 10.0.1.1 255.255.255.224
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  penetration of the IP stream
  IP nat inside
  IP virtual-reassembly
  IP tcp adjust-mss 1452
  !
  interface Vlan10
  VLAN_10 description $ FW_INSIDE$
  IP 10.0.10.1 255.255.255.224
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  penetration of the IP stream
  IP nat inside
  IP virtual-reassembly
  IP tcp adjust-mss 1452
  !
  interface BVI1
  Description $FW_INSIDE$
  in the form of address IP WAPB dhcp host name
  no ip redirection
  no ip unreachable
  no ip proxy-arp
  penetration of the IP stream
  no ip-cache cef route
  no ip route cache
  !
  router RIP
  version 1
  10.0.0.0 network
  !
  IP local pool vpnpool 197.0.0.1 197.0.0.5
  no ip forward-Protocol nd
  IP route 0.0.0.0 0.0.0.0 dhcp
  IP route 0.0.0.0 0.0.0.0 FastEthernet4 dhcp
  IP http server
  access-class 2 IP http
  local IP http authentication
  IP http secure server
  !
  The dns server IP
  IP nat inside source list 1 interface FastEthernet4

  Overload
  IP nat inside source list 2 interface FastEthernet4

  Overload
  IP nat inside source static tcp 10.0.10.3 3389

  interface FastEthernet4 3389
  IP nat inside source static tcp 10.0.10.3 1723

  interface FastEthernet4 1723
  IP nat inside source static tcp 10.0.10.3 80

  interface FastEthernet4 80
  !
  record 10.0.10.1
  access-list 1 permit 10.0.1.0 0.0.0.31
  access-list 2 permit 10.0.10.0 0.0.0.31
  access-list 199 permit any one
  access-list 199 permit tcp any any eq 1723
  access-list 199 permit tcp a whole Workbench
  access-list 199 permit udp any any eq 3389
  access-list 199 permit udp any any eq ntp
  access-list 199 permit udp any any gt 1023
  access-list 199 tcp refuse a whole
  access-list 199 tcp 10.0.0.0 refuse 0.255.255.255 everything
  access-list 199 tcp 172.16.0.0 refuse 0.15.255.255

  any
  access-list 199 tcp 192.168.0.0 refuse 0.0.0.255 any
  access-list 199 refuse udp 10.0.0.0 0.255.255.255 everything
  access-list 199 refuse udp 172.16.0.0 0.15.255.255

  any
  access-list 199 refuse udp 192.168.0.0 0.0.0.255 any
  access-list 199 refuse icmp no echo
  access-list 199 deny udp any how any eq 135
  access-list 199 deny udp any any eq netbios-ns
  access-list 199 deny udp any any eq netbios-ss
  access-list 199 deny udp any any eq isakmp
  access-list 199 tcp refuse any any eq telnet
  access-list 199 tcp refuse any any eq smtp
  access-list 199 tcp refuse any any eq nntp
  access-list 199 tcp refuse any any eq 135
  access-list 199 tcp refuse any any eq 137
  access-list 199 tcp refuse any any eq 139
  access-list 199 tcp refuse any any eq www
  access-list 199 tcp refuse any any eq 443
  access-list 199 tcp refuse any any eq 445
  access-list 199 refuse an entire ip
  not run cdp

  !
  control plan
  !
  Bridge Protocol ieee 1
  1 channel ip bridge
  bridge 10 Protocol ieee
  IP route 10 bridge
  connection of the banner ^ CAuthorized access only!
  Unplug IMMEDIATELY if you are not authorized

  user! ^ C
  !
  Line con 0
  no activation of the modem
  telnet output transport
  line to 0
  telnet output transport
  line 2
  no activation-character
  No exec
  preferred no transport
  transport of entry all
  transportation out all
  line vty 0 4
  access-class 104 in
  transport input telnet ssh
  !
  max-task-time 5000 Planner
  Scheduler allocate 4000 1000
  Scheduler interval 500
  Server NTP 192.43.244.18
  end

  Hello

  The problem is due to NAT configurations. Please, try the following:

  no nat ip within the source list 1 interface FastEthernet4 overload

  no nat ip inside the source list 2 interface FastEthernet4 overload

  access-list 101 deny ip 10.0.0.0 0.0.255.31 197.0.0.0 0.0.0.7

  access-list 101 deny ip 10.0.0.0 0.0.255.31 10.0.0.0 0.0.255.255

  access-list 101 permit ip 10.0.0.0 0.0.255.31 all

  Internet route map

  corresponds to the IP 101

  output

  IP nat inside source overload map route Internet interface FastEthernet4

  This will ensure that the VPN clients can access all internal

  resources. However, they will not be able to access to the 10.0.10.3 Server

  using its private IP address that you can not use the roadmap, when you use the

  keyword "interface." If you have a static IP address assigned to your FastEthernet4

  You can then use the interface by the ISP, the configuration below:

  access-list 102 refuse host ip 10.0.10.3 197.0.0.0 0.0.0.7

  access-list 102 refuse 10.0.10.3 ip host 10.0.0.0 0.0.255.255

  access-list 102 permit ip 10.0.10.3 host everything

  route server map

  corresponds to the IP 101

  output

  no nat ip inside source static tcp 10.0.10.3 interface FastEthernet4 3389

  3389

  no nat ip inside the source static tcp 10.0.10.3 1723 interface FastEthernet4

  1723

  no nat ip inside the 80 tcp static 10.0.10.3 source FastEthernet4 80 interface

  IP nat inside source static tcp 10.0.10.3 3389 "FastEthernet4 IP" 3389

  route server map

  IP nat inside source static tcp 10.0.10.3 1723 "FastEthernet4 ip" 1723

  route server map

  IP nat inside source static tcp 10.0.10.3 80 'FastEthernet4 ip' 80-route map

  Server

  I hope this helps.

  Kind regards

  NT

• DNS problems when VPN Client connection is Active

  Using the latest version of the Cisco VPN client. Support remote clients... when I VPN on client sites I lose connectivity to my local exchange server. The DNS client appears to become primary on a VPN connection, where he bring himself to the public address of our exchange server. In the Transport settings, I have "allow LAN access. Any help would be appreciated. Thank you.

  Whether or not the local lan access is allowed is a setting on the device remote, not only to your customer. To see if you get local lan access, look under the tab Details of statistics and the road.

• How to grant local LAN access when you are connected via a central-site

  I know how to activate the local LAN access in the properties for the client connection, but I don't know how to allow access to the central site

  Central site is a CISCO 1721 with module as well as IOS IPSEC VPN

  tanks for any help

  Hello

  This feature is only supported when you connect to a VPN3K box, its not available for PIX/IOS as a vpn server, allowing it on the client-side custom has no effect when you connect to a server of PIX/IOS.

  THX

  AFAQ

• I installed in my laptop XP - SP3 PersonalFirewall of Privacyware and I have this problem: when restarting, always internet access isn't available (WiFi/LAN).

  network adapter AutoDetect fails

  Hello:

  I installed in my laptop XP - SP3 PersonalFirewall of Privacyware and I have this problem: when restarting, always internet access isn't available (WiFi/LAN).
  Using the command ipconfig, I found that these cards are not detected. (Although without wireless/LAN icons do not display the modem connection). Also, if I go into Device Manager, I see network cards. BUT if I select "research material changes", then the other adapters will appear (those of Privacyware) and internet connection is reset and it will work then.  I wonder why windows does not detect this kind of cards automatically when I start it.

  This problem occurs only in my laptop - I installed the project Feederwatch on a laptop another XP and it worked, so Privacyware cannot provide a solution, since seems a very specific problem.

  Thanks for any idea!

  Seems that the solution was:

  1 - Open Device manager and view the hidden devices.
  2. then go into not connectable & play devices and manually delete all the remainers network software & security uninstalled (process antivirus, firewall, monitor).
  3. several reboots were required in order to know if the garbage problem has been removed.

• I'm having a problem when I try to establish a VPN connection

  I have a problem when I try to establish a VPN connection between a remote computer and my desktop computer that we use as a file server in our network of workplaces. It has a static IP address. The VPN connection was working until the person on the other side you have forgotten the password. We decided to set up a new connection with the new user name and password. The remote computer could not establish a VPN connection with the server, but when the person on the other side tried to open the files, she received a message indicating there is no permission to do so. I can't understand how to give the person permission to open folders. Can anyone help?

  Hello

  Thanks for posting in the Microsoft Community.

  The question you posted would be better suited in the TechNet community.
  http://social.technet.Microsoft.com/forums/en/w7itprogeneral/threads

  I hope this helps!

• Very strange Vista problem when behind a switch

  I bought the router WRT610N along a LINKSYS EG008W 10/100/1000Mbps Gigabit Workgroup Switch. In my small office (4 closed offices and an area central + kitchen + room + storage + a bowl of chocolate for my pregnant wife), we were using our ISP (Bell) modem/router (Wi - Fi + 4 ports RJ-45) with switch 8 old ports. There are 3 Mackintosh a XP and a Vista workstations and a D - Link DNS-323 NAS on the local network, + XP/Vista/Mac laptop wireless now and then. I wanted to update our stuff for a flow rate of localized Gigabyte (still looking autour to build a Xeon server + file server), with Wireless N Dual-Band, and the following configuration has worked right away without installing anything same software-wise, nor the need to reset - restart a computer or device: all records shared Internet connection was available immediately which was very satisfying. I even bought Cisco Network Magic Pro 5.5 and I'm glad I did, this is a really well done and intuitive graphic interface to manage small business networks (one license for PC stations up to 8 + 8 Mac stations), if not the best out there for its target market niche and prices vary.

  However, there is a confused about Vista glitch: I have to fix directly on one of the ports on the WRT610N, it won't work if I try behind a switch box (although it works for all other operating systems), using the following network configuration:

  1. all the workstations are connected to the switch, focused on one of the ports of WRT610N
  2. The Internet WRT610N port Bell's DSL modem
  3. SIN D - Link DNS - 323 and the port 3 WRT610N
  4. EG008W Switch 4 port WRT610N 1 port
  5. Workstation to the switch EG008W 2 Vista port
  6. Workstation XP and switch EG008W 3 port
  7. Workstations Mac to switch EG008W ports 1, 5, and 6

  From the XP desktop, I see Macs and access the NAS. From a Mac, I can see + access the XP and the NAS. Vista station connects any behind the switch EG008W: I * must * plug into the router, WRT610N, something I don't want to because the switch is there to serve as a wall mounted RJ45 plugs into each office (where the Mac XP and Vista workstations are located)... Any help or link to a relevant reference would be greatly appreciated.

  Kevj, thanks for answer you, I came here to close the topic because I put the finger on the problem and it is resolved: the problem lies elsewhere, it is not the calbling or some other hardware problem. I have replace the Vista box by a mobile XP, using the same wiring right and everything worked well, he wasn't a wiring problem... Note that the workstation is a Dell Studio which comes with a Realteck Gigabit controller box (so I guess that many other models/brands also provide this same controller, which means that many other users can know this problem).

  Here's what I did:

  • I got rid of Vista by installing Windows 7 and everything worked fine!
  • I then published an update of Windows from the Microsoft site, which offered a patch for the familly Realteck GBE (among other patches) controller
  • After restarting the computer, the network was not accessible more while the Win7 box is behind the Swithcher: it behaved exactly as when it was Vista (indicating that the adapter was unplugged when behind the selector and then giving access while behind router WRT)!
  • So I restored the last just restore point prior to the update of the controller and got everything back to normal; I then did another session of MS Windows Update without the Realteck driver patch, and everything worked well.

  Conclusion: DO NOT update your controller driver Realteck GBE from Microsoft, whether for Vista or Windows 7, it has a bug which takes place whenever your Vista/Win7 box is behind a DMZ sub-segment of LAN using a blender (switch-router-router/DSL-ISP).

  Note: the WRT610N works like a charm! It is plugged with a RAID0 of DNS-323 1 TB NAS, one 8-port Gigabit switch power supply 3 macs, 1 XP and 1 Windows 7, Wi - FI works well enough (G mode, while the band n is open - I don't have a camera of 5 GHz yet so I can't say for this FREQUENCY range) and I left the own DSL access available Point. Which means that there are 3 Access Points: one directly on the DSL router that leaves the LAN in a DMZ (cannot be seen or accessed from the mobile) and 2 more on the WRT610N dual band access not only to the Internet but also for shared resources). Blue color for the port connected to the dwitcher, which means a Gigabit local LAN, and green port for the DNS-323 whitch works to 100 MB (unfortunately they still do not have a Gigabit NAS). I am very happy with the product, more when combined with Network Magic Pro.

• I have problems when sending emails on Outlook Express (Windows XP Home) told in the Outbox, even if they were sent. What can I do?

  I have problems when sending emails on Outlook Express (Windows XP Home) told in the Outbox, even if they were sent.  What can I do?

  You have apparent dbx file corruption.

  Spend most of your messages out of the Inbox and then create new folders to send and sent items box after having moved the messages you want to save to a local folder that you create.

  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.

  In Windows XP, Win2K & Win2K3 the OE user files (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  With OE closed, find the DBX files for the items in the Outbox and sent and delete them.  New ones will be created automatically when you open OE.

  After you're done, followed by compacting your folders manually while working * off * and do it often.

  Click Outlook Express at the top of the the folder tree so no folders are open. Then: File | Work offline (or double-click on work online in the status bar). File | Folder | Compact all folders. Don't touch anything until the compacting is completed.

  General precautions for Outlook Express:

  Do not archive mail in the receipt or sent items box. Create your own user-defined folders and move messages you want to put in them. Empty the deleted items folder daily. Although the dbx files have a theoretical capacity of 2 GB, I recommend all a 300 MB max for less risk of corruption.

  Information on the maximum size of the .dbx files that are used by Outlook Express:
  http://support.Microsoft.com/?kbid=903095

  Disable analysis in your e-mail anti-virus program. It is a redundant layer of protection that devours the CPUs, slows down sending and receiving and causes a multitude of problems such as time-outs, account setting changes and has even been responsible for the loss of messages. Your up-to-date A / V program will continue to protect you sufficiently. For more information, see:
  http://www.oehelp.com/OETips.aspx#3

  Why you don't need your anti-virus to scan your email
  http://thundercloud.NET/infoave/tutorials/email-scanning/index.htm

  Note that for some AV programs, it may be necessary to uninstall the program and reinstall in custom Mode and uncheck analysis when the option is the result of e-mail messages.

  Compact often as specified above.

  And backup often.

  Outlook Express Quick Backup (OEQB Freeware)
  http://www.oehelp.com/OEBackup/default.aspx

• I m get problem when running IE, Chrome or firefox

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: rundll32.exe

  Application version: 6.0.6000.16386

  Application timestamp: 4549b0e1

  Fault Module name: sprote ~ 1.dll

  Fault Module Version: 0.0.0.0

  Timestamp of Module error: 50212e17

  Exception code: c0000005

  Exception offset: 00079aed

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 16393

  Additional information 1 c: 649

  More information 2: 2d993315539d1b4488dfdd4c43482412

  3 more information: bde9

  Additional information 4: e8c962f1cadf8af02e768e3862dcb56c

  Read our privacy statement:

  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: iexplore.exe

  Application version: 9.0.8112.16450

  Application timestamp: 503723f6

  Fault Module name: ntdll.dll

  Fault Module Version: 6.0.6002.18541

  Timestamp of Module error: 4ec3e3d5

  Exception code: c0000005

  Exception offset: 00039487

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 16393

  Additional information 1: c453

  More information 2: abcc8f7853b48d9807d6d51eb1fa5df9

  Additional information 3: c453

  Additional information 4: abcc8f7853b48d9807d6d51eb1fa5df9

  Read our privacy statement:

  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

   

  Signature of the problem:

  Problem event name: BEX

  Application name: chrome.exe

  Application version: 21.0.1180.89

  Application timestamp: 503ebf10

  Fault Module name: StackHash_2d77

  Fault Module Version: 0.0.0.0

  Fault Module Timestamp: 00000000

  Exception offset: 2028ad6b

  Exception code: c0000005

  Exception data: 00000008

  The system version: 6.0.6002.2.2.0.768.3

  Locale ID: 16393

  Additional information 1 / 2d 77

  More information 2: 0f87f8924e80c4cc111b410bf65df663

  Information has additional 3: 408

  Additional information 4: a747d84ca122d3999f6adb84ba0cb3d8

  Read our privacy statement:

  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409

  These are the messages of problem I m get... Please help me what I have to do...

  Thank you

  Hi Raja DSP,

  1. what version of IE are you using?

  2 did you do changes on the computer before the show?

  Follow the suggestions below for a possible patch with Internet Explorer:

  Method 1: I suggest you to run the fix - it and check if the problem still persists.

  Troubleshoot Internet Explorer to IE quick, safe and stable

  http://support.Microsoft.com/mats/ie_performance_and_safety/

   

  Method 2: If the method above is not enough you can follow the steps in the article mentioned below and check.

   

  Tips for solving problems when Internet Explorer hangs or stops working

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-Internet-Explorer

  Warning: Please note that the reset Internet Explorer (IE) resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.

  If you have problems with Google Chrome and Mozilla Firefox, you see the following link for their respective forums:

  Google Chrome

  http://www.Google.com/support/chrome/

   

  Mozilla Firefox

  http://support.Mozilla.com/en-us/home

  Let us know if that helps.

• Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 43.

  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 43.

  Signature of the problem:
  Problem event name: PnPDeviceProblemCode
  Architecture: x 86
  Hardware ID: PCI\VEN_10DE & DEV_0428 & SUBSYS_110B1734 & REV_A1
  Configure the class GUID: {4d36e968-e325-11ce-bfc1-08002be10318}
  PnP problem code: 0000002B
  Driver name: nvlddmkm.sys
  Driver version: 8.17.13.142
  Driver date: 15/05/2012
  OS version: 6.0.6001.2.1.0.768.2
  Locale ID: 1033

  Hi, Senga,

  Start > right click on computer

  Select manage

  Click on continue in the UAC window

  Click on Device Manager

  Click on the + sign next to the device

  Right click on driver and select rollback

  If the cancellation is dimmed, select uninstall

  Close Device Manager

  Back to zero computer and Windows will reinstall the driver

  Go to the manufacturer website, download the updated driver to update and save it to the desktop

  Double-click the .exe file to install

  You can also try booting in safe mode with network.  Download the following tool and run a scan complete to rule out malware.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16

• How can I get Vista "Windows Mail" to check mail using my connection local (LAN) internet?

  How can I get Vista "Windows Mail" to check mail using my connection local (LAN) internet?

  It allows only wants to "connect" using dial-up, wireless or wired ISP (type PPP) requiring a UID and password, of which none seem to allow me to select a LAN (ISP) simple (without a password).

  I know that the Ethernet connection works Ok, because I can use it with a standard Web browser; only the mail tool can't seem to see or use.

  Whenever I tell the Windows Mail email 'Send and receive', he wants to 'connect' for remote access or one of his three choices (listed above and direct exclusion of any connection to the local network).  It works with remote access, so once I have spend that I should be Ok. but I can't make it work directly.

  Help.

  In Windows Mail, go to select Tools, accounts, your account email, properties, connection.  It shows for the connection?  You
  should leave this setting not selected, in which case Windows Mail will use the IE connection uses.
   
  In addition, under Tools, Options, connection, the first checkbox must be checked, and the second box unchecked.
   
  If everything which withdraws, but you still have the problem, the account may be damaged.  Remove account, restart Windows Mail,.
  then recreate the account.
   
  Gary van, Microsoft MVP (Mail)
  ------------------------------------------------------
   
  "W6NCT" wrote in the new message: * e-mail address is removed from the privacy... *
   
  How can I get Vista "Windows Mail" to check mail using my connection local (LAN) internet?
   
  They don't allow that wants to "connect" using dial-up, wireless or wired ISP (type PPP) requiring a UID and password.
  which none seems to allow me to select a LAN (ISP) simple (without a password).
   
  I know that the Ethernet connection works Ok, because I can use it with a standard Web browser; is not only the messaging tool
  to see or use.
   
  Whenever I tell the Windows Mail email 'Send and receive', he wants to "connect" to remote access or one of his three choices (listed
  above and to the exclusion of any direct connection to the local network).  It works with remote access, so once I have spend that I should be Ok. but I just
  cannot operate directly.
   
  Help.
   
   

  Gary van, Microsoft MVP (Mail)

• Problem when using bb-ant-tools to create a multi-module application

  I am trying to redesign an application prototype into something more adapted to our needs. The prototype was built with the first version of the Eclipse plugin, but I've converted successfully to the current version.

  I have same configuration Ant with bb-ant-tools for it and have successfully build the application and the executable running on the real device.

  But this prototype had code to put them all in a single module, even the source to a third party library with support for managing messages JSON ('J2ME JSON").

  We need to build several slightly different applications from the same code base (differing mainly in aspects of the customer specific look and wording etc.).

  So I want to divide the code into several distinct modules, each providing it is build own artifacts and have a top-level project for each variant you want to produce.

  So at the beginning I want to have these three modules:

  • J2ME-json - the third party lib
  • Code base - the largest part of the source code and default localization resources
  • my-app - the main class, icon resources (and in the future some property files and resources specific to the customer location)

  I have Ant generate files for each module, which compiles and signs packages resulting - seems ok so far, no problem when executing the task of sigtool. The build for 'j2me-json' file and 'code base' defines the product as a type = "library".

  The build for "my-app" file collects the artifacts to build (* .jar, * .cod, etc.) and copy them to a local directory "dependencies", where they will be extracted for the compilation of the actual application. After compiling and signing all are copied to a deployment directory.

  Deploy the application on the device via the 'Desktop Manager' but when I run it on the device I get the error message:

  Error at startup MyAppId: Module ' code$ 2dbase ' attempts to access a secure API.

  The strange thing is, that the "Tool of Signature" window shows demand of signature of all modules during the phase of signature of the request, not only for the request form itself as the error message suggests. And I even sign the modules separately because of this message - but it does not help...

  So, what's wrong here?

  Here is the definition of the actual target of the relevant elements:

  The *.alx file that looks like this:

           My App Name      1.2.1.35               MyAppId.codj2me-json.codcode-base.cod         
  

  I'd appreciate any help with this problem! Thanks in advance...

  Horst Weber.

  Found!

  My mistake was that I thought that I can mix attribute and property file inclusion statements in the task of jdp bb-ant-tools. My actual task for libraries looked like this:

  Obviously, the author didn't want to handle the ambiguity when someone sets the same property as an attribute, and in the file. So you should use either one or the other: If you use properties files, then declare all your properties here.

  So this message "Module attempts to access an API secured." seems to be very misleading: it disappered after correction of the generation of files and I now have a common application.

• A problem when authentication via Radius ASA

  Hi all

  Please give me a helping hand. I have a problem when through ASA 5520 via Radius Authentication for ACS 4.0 via the VPN device. I need to configure secure authentication and NAC for remote user VPN. It simply does not work, but it works when you use Ganymede so all the connection seems to be ok as ACS succesfully authenticate a remote via MS AD VPN user when you use Ganymede. But I read that I can not use NAC when Ganymede using, I'm good? ASA and ACS journals indicate a problem with the shared key but I already double checked the key on both sides, the IP address is correct on SAA and I also tried all possible methods of RADIUS on SAA. Any idea where might be a problem?

  Hello

  When you use ACS 4.0, then make sure that the AAA Client for ASA entry you created on GBA, if under a NDG, then make sure that there is no key to the NDG level.

  Otherwise, pass entry client ASA as RADIUS ACS in NDG (Unassigned) on ACS.

  Kind regards

  Prem

• I have problem when downloading Skype installation.

  original title: problem downloading Skype

  Hello

  I have problem when downloading Skype installation. I tried to download it form Skype site and filehippo.com. I also tried downloading in different browsers such as chrome, firefox and internet explorer 9 (with and without using IDM). and also I tried it on different systems is to say my office as well as the laptop (both running windows 7) .i have tried on different internet connections, that is to say wifi and LAN as well.
  The problem is that, in case of downloading online (i.e. about 600 KB install size), it keeps downloading and ultimately we mean the link gives the complete download of installation and when I try to download the complete configuration (IE 24.5 MB) it continues to download well until it reaches 24.3/24.5 MB downloaded. After that it stops just to make progress. What can possibly be the problem.
                          
  Thank you.

  Skype download successfully if your Internet connection is stable.  How does this PC connects to the Internet:

  (1) to a router:
  (a) wireless (wifi)
  (b) wired Ethernet LAN

  (2) directly on the Internet:
  (i) wired cable modem or xDSL (telephone line)
  (II) mobile phone style - 3 / 4 G wireless connection

  You may need to try a different computer and it download full installer of Skype:

  http://community.Skype.com/T5/general-discussion/alternative-download-links/m-p/122344

  However, Skype still seems to need a fully functional Internet during the installation process.

• Problems when you do a lot of landfills

  Hirt,

  Thanks for your help. With the changes, you suggested that he now works with jmx authentication as well.

  However, I had another question. I can't make JFlow work. I installed the plugin and whenever I have right click on my tab use remotely of the JAVA virtual machine and click the Dump of the heap, it opens popup system for me to select where to save the dump. But as soon as I select and click OK, it throws this error

  Problems when you perform the Dump heap for JOverflow analysis

  Problems when you perform the Dump heap for JOverflow analysis

  When you've got the system file selection popup,

  have you selected a location that is writable (by the same path) to your local machine and the remote JVM?

  JOverflow send any data over the network, simply of creates a heap dump in a local file to the profiled JVM (in this case your remote JVM) and opens the way for the same file in the JMC client.