vpn server 2012 problem
I downloaded the 2012 standard test server on my server set up as a file server. We use it for is in and out of the office network drives. I had trial set up works correctly with network drives via VPN for remote access and the office on the local network. I bought a copy of windows server 2012 with 5 CAL license and reinstalled the program everything works. I have the updated VPN in place and it connects, but when I type in the location of the shared folder by using the name of the server that it will not conclude it, but it will be on the local network and using the external server IP address when connected to the VPN. Any idea what my problem is? This network does not use DNS or a domain.
Much better if you can transfer this issue to this... http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
Tags: Windows
Similar Questions
-
Installation of Windows Server 2012 problem
I tried with different configurations, install Windows Server 2012 as operating system prompted but still got the error attached.
Someone knows why?Hello and welcome to the communities.
What version of VMware Player are you using?
-
After moving to Windows server 2012 VPN connection error
Hello world!
Recently, I upgraded my Windows Server 2003 SB server to a new server running Windows Server 2012.
I started from scratch by creating a new domain, user, accounts etc.
The new server is using the same IP address as the old server.
Since then, I can't connect through the VPN. I have already added the role of remote access on the new server.
When I try to connect to my Windows 7 laptop, I get this error:
"Error 800: the remote connection does not because attempts VPN tunnels failed." The VPN server is maybe inaccessible. "If this connection tries to use an L2TP/IPsec tunnel, the security settings required for IPsec negotiation is may not configured properly."
Any help with this is appreciated.
Hello
The question you posted would be better suited in the TechNet Forums. We have a separate team working on the server problem, so I would recommend posting your query in the TechNet Forums.
TechNet Forum
http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itprovirtHope this information is useful.
-
Hello team HP,
We used the driver 32 bit printer "HP Color LaserJet 4600 PS" to write the PDF file using Acrobat Distiller in Windows server 2003 operating system.
But now, we have migrated our production environment for Windows Server 2012 R2 64-bit operating system and using the 32-bit printer "HP Color LaserJet 4600 PS" driver in the operating system Windows Server 2012.
Is the driver support 32 bit printer "HP Color LaserJet 4600 PS" Windows Server 2012 R2 64-bit operating system?
If it is not supported then what printer driver will support the Windows Server 2012 R2 64-bit operating system?
Help us to this problem as soon as POSSIBLE and its very high priority for us.
Kind regards
Gaudin. B
Hello
CLJ 4600 is not supported on Windows Server 2012. However, you can use HP Universal Print Driver (UPD) for print on CLJ 4600 of Win Server 2012.
Here is a list of the printers supported with the UPD: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04324001#N106AD
Specification of the UPD: http://h20564.www2.hp.com/hpsc/doc/public/display?docId=emr_na-c04380141
Thank you
-
Windows Server 2012 Foundation and SMB problems with older equipment
Hello
My problem would be resolved if I had Windows Server R2 2012 but I have Windows Server 2012 Foundation.
This article describes the problem exactly: https://support.microsoft.com/en-us/kb/2896636
But of course, the solution does work with my version of the server.
Does anyone know if there is a similar fix available? I got my hunting.
This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
If you give us a link to the new thread we can point to some resources it -
Windows Server 2012 BEX problem
Hello, I got Windows Server 2012 and VPS, I am connected by DRC, turned on my Tibia & Bot and 'close this window of DRC' after... 20 ~ minutes...
Problem signature: Problem Event Name: BEX Application Name: Tibia.exe Application Version: 10.9.3.0 Application Timestamp: 5726e97b Fault Module Name: Tibia.exe Fault Module Version: 10.9.3.0 Fault Module Timestamp: 5726e97b Exception Offset: 00362276 Exception Code: c0000409 Exception Data: 00000007 OS Version: 6.3.9600.2.0.0.16.7 Locale ID: 1033 Additional Information 1: e6cc Additional Information 2: e6cc222ab84bf53679fea9a972cf2b2b Additional Information 3: 996a Additional Information 4: 996a8ba1334d6fb9f6300d6752909e6d Read our privacy statement online: http://go.microsoft.com/fwlink/?linkid=280262 If the online privacy statement is not available, please read our privacy statement offline: C:\Windows\system32\en-US\erofflps.txt
Can U help me?
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
Configuration VPN windows server 2012 essencial
What policy I need to add in the game until I will configure the VPN in windows server 2012 essential? because when I install the remote access roles I received a message when done that mention me politics. later I activate access and remote access and I can't access the internet, I disable access and remote access to I can connect to internet from my server.
There is no forums for Windows Server community. Windows Server forums are on the Technet site. http://social.technet.Microsoft.com/forums/en-us/home?category=WindowsServer
-
Color LaserJet 200 M251 and Windows Server 2012 R2 installation problem
I have a problem installing with the M251 printer on a clean install of windows server 2012 R2.
I want to connect the printer via USB only.
I tried installing the driver package and with the complete package. I turned on the printer of the smart install feature.
But every time the same problem occurs.
The printer driver is correctly installed, but the printer HP (LEDM) driver failed.
The debugging information:
Installed the device.
hpbuio25l.inf _amd64_85c42d890fc & dc10\hpbuio35l .inf for the device USB \VID_03F0&PID_132A&MI_01\6&3AB71850&6&0001 instance ended up with the following status: 0xE0000219
If I want to reinstall the driver again, I received the message:
Setup error
An entry in the Inf file is missing, the file may be Windows 95...
Could you please help me, how to solve this problem?
I need to activate the visual experience of Windows Server 2013, then the USB works
-
SDM &; easy VPN server problem
I'm having a problem setting up an easy VPN server using Cisco Security
Device Manager Version 2. 0a on a router in 1711 with IOS 12.3 (7) XR3.
I have reset the router to the factory defects since the opening screen of SDM.
Connect to 10.10.10.1
User: cisco
Password: Cisco
Start SDM for the initial router configuration dialog box.
Don't use CNS
On basic configuration screen:
Hostname set to router
Domain: test.com
Synchronize time with local PC
Change the user name
New user name: root
password: xyzzy123
password: xyzzy1234
The LAN Interface Setup screen
IP address set to 10.1.1.1
Subnet: 255.255.255.0
Active DHCP server
Start IP: 10.1.1.50
End IP: 10.1.1.70
DNS Configuration screen
Primary: 45.45.45.45
Secondary: 45.45.45.46
Use for DHCP Clients
WAN Configuration screen
Ethernet selected without Encapsulation PPOE
No dynamic (DHCP Client) host name
Advanced options screen
Selected for VLAN1 port address translation
After reading the summary, I chose the FINISH. Asked if dialog box I have
you want to set up a basic firewall, I selected YES. I left all the
secure by default items selected. I clicked FINISH. SDM detected that the
DHCP client on the untrusted external interface and asked if I wanted to
allow DHCP traffic through the firewall. I selected YES. The configuration
has been delivered.
Save the running-config startup-config and reloaded the router.
Released and renewed my ip address and then reconnected in 1711 from new
user name and password. SDM restarted.
Has begun the task of configuration and choose to set up an easy VPN server.
The opening screen had a command prompt to enable AAA. I launched the selected task
After that the AAA commands have been delivered to the router.
I chose the interface FastEthernet0 menu drop-down
IKE proposals - selected default all the
Transform set - selected default all the
Group authorization / policy research - Selected Local only
Add the user name: User1
Password: local1
Encrypt with MD5
Privilege: 2
Group permission/User Group Policies
Add political group: tunnel
Preshared key: sharedkey
Selected new address Pool: 10.1.1.80 to 10.1.1.90
Test after you have configured the selected button.
Exit this screen, there was a warning SDM on the NAT with ACL rules
have to be converted into NAT rules with course maps. I clicked YES to let
SDM convert rules.
Tests successful Easy VPN Server and client screen displays a warning
on the "crypto ipsec df - bit clear' needing to be defined." He was not a
way to put it in SDM and the search function had no success.
I copied the running-config to the startup-config and tested the router from a
connect remotely using a different ISP.
The results:
The SDM monitor shows the client connection, but the client cannot ping
any host on the LAN of the router. No one on the LAN can easy ping of VPN client
Assigned IP of VPN, but they can ping the client using the asigned IP ISP
address.
It seems that SDM not correctly configures the 1711 to route of the
VPN interface to the local network.
I enclose my 1711 Running Configuration generated by SDM.
Hello
I think that the reason why the ping is not successful is that your LAN IP address (connected to the VLAN interface) and the pool of IP addresses assigned to the client are in the same network.
You can try assigning a pool of IP addresses for VPn clients that is in another subnet (say 10.1.2.80 to 10.1.2.90) and then try to ping?
You can change the pool by means of configure-> additional tasks-> local swimming pools.
You can then disconnect the client on the Monitoring page and connect again.
Kind regards
Ravikumar
-
Problems installing OBIEE11.1.1.9.0 on MS Windows Server 2012 SP2
Hello Experts,
We install OBIEE11.1.1.9.0 on MS Windows Server 2012 SP2. He was installing (install the business - create a new BI system) smoothly, but in the last configuration Page progression at 27%, he was stuck. In accordance with the recommendation of oracle.
It is a problem with WebLogic Server installation on Windows 2012 R2. That is documented in the unpublished bug 16844206 WLST IMPOSSIBLE GET ENV ON WINDOWS SERVER 12 WITH ENV MINIMAL
MDG action plan-
Install Java 1.7.
Installation of WebLogic Server 10.3.6.
Patch WebLogic Server with Patch 16844206 .
Perform a software installation of OBIEE 11.1.1.9.0.
Configure OBIEE
Following the same thing we did it-
(a) installed weblogic 10.3.6
(b) Dowbloaded the patch and ran GUI and command line.
1. When was held from the GUI
Downloaded Patch_16844206. copied the content of this file zip, except the file Readme in your cache directory SmartUpdate (MW_HOME/utils/bsu/default cache_dir). Ran the bsu.cmd file located in the folder WM_HOME/Middleware/utils/bsu to open the Smart Update utility Oracle - and then 'downloaded Patches' table ffound Patch Id SRSV Bug 16844206 and then clicked on apply.
However after doing a "running Validation" popup appears and he is blocked for 90 minutes at this same position. (see screenshot)
2. When ran from command line-
D:\app\Oracle\Middleware\utils\bsu > bsu.cmd-prod_dir=D:\app\Oracle\Middleware\wlserver_10.3-patch_download_dir = D:\app\Oracle\Middleware\utils\bsu\cache_dir-statut = downloaded - discovers - verbose
Exception in thread "Main Thread" means
D:\app\Oracle\Middleware\utils\bsu > bsu.cmd-prod_dir=D:\app\Oracle\Middleware\wlserver_10.3 - patchlist = 23698-verbose - install
Exception in thread "Main Thread" means
Any solution?
Thank you very much
Benoit
Hi all
According to Oracle advises has resolved it as follows.
It is a failure with OutOfMemory. Increase the memory allocated for the process of the bsu. Change the following line in bsu.cmd
MEM_ARGS =-Xms256m-Xmx512m set
TO
Set MEM_ARGS =-Xms1024m-Xmx1024m
Basically, you will need to open bsu.cmd in Notepad, and then change the setting above. And then again run. And it will work.
Thank you very much
Benoit
-
Debugging in kernel mode on network problem Windows Server 2012 R2 or Windows 8.1 comments
Hi all!
I tried the kernel debugger of network installation of client Windows Server R2 2012 on article according to VMware Workstation 10.0.1:
http://msdn.Microsoft.com/en-us/library/Windows/hardware/hh439346 (v = vs. 85) .aspxBut I can't connect to guest with WinDBG. I have set up bcdedit, restart and see that boot OS comments very slow.
Then I run regedit, go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\kdnet and see that
KdInitResultString value is 'InitializeNetwork could get the Ethernet address of the host debugger.".
KdInitStatus value is "c00000b5".I tried:
-change of hardware to 9 version
-change the comments to e1000 Ethernet card
-disable the DHCP (debugger comments must use APIPA)
-change the type of connection (bridge NAT, host-only)and every time I get the error "Failure of InitializeNetwork get the Ethernet address of the host debugger.". Guest 8.1 Windows x 64 and x 86 Windows 8.1 I get the same result.
But I can debug comments Windows Server 2012 and Windows 8 on network without any problems. Also I can debug Windows Server R2 2012 on Oracle VirtualBox network.Is this a problem of VMware Workstation? Anyone can debug comments WIndows Server 2012 R2 or Windows 8.1 on network in VMware Workstation?
Thank you!
Have you tried the Workstation Technology Preview July 2014? (https://communities.vmware.com/community/vmtn/workstation/vmware-workstation-technology-preview-2014) I think that this problem has been resolved.
-
Installation of Win Server 2012 9 desktop problems
I have a 64 bit Windows 7 with 9 Workstation installed host computer.
I am trying to create a virtual machine for Win Server 2012, but I get a license error. There are other posts on this topic, but it relates to the work station 8. I tried the solutions in these messages, but I still have a problem.
I downloaded the ISO file using Internet Explorer twice. Once I used the ISO to create the virtual machine and once I burned the ISO to a DVD and tried. It always gives me this error when installing:
"Windows cannot find the Microsoft software license agreement. Make sure that the installation sources are valid, and restart the installation. »
The problem is that I tried the installation of 5-6 times and I can't spend.
All the world did this with success?
Thank you
Stem
Try this:
When you create a new virtual machine
-Choose the option: I'm going to install the operating system later. (The virtual machine will be created with a blank hard drive.)Do not type the path to the ISO file
-After the creation of new virtual machine also set the path to the ISO file (VM / parameters / CD-DVD.../Use ISO image file)
-After the execution of the new VM to install automatically saved (if not run probably on purpose = error) -
Problema al add UN nodo adicional al Cluster Windows Server 2012 con VMware Workstation 9 en
Hola Buenas,
Ante todo decir este are a Québec fallo he revisado y las responses in different los don't post han well para help me, good os.
El caso are that I have 2 servers DELL PowerEdge R420 fisicos identicos, cada uno con ellos 3 VMs sober instaladas VMware Workstation 9. The first virtual machine are an image of Kerio control, a second virtual machine to Windows Server 2012 con dominio Controladora, is the third VM con WS2012're donde quiero crear el cluster con dominio usuario. ESTOS servidores knew vez esta una cabina data via iSCSI connected.
Add tambien when performed the tests of validation led Cluster, todo lo tengo OK. El caso are so creo el cluster con el Nodo 1 y 2 Nodo (sugar Québec cada uno fisica Máquina distinta ellos y bajo mismo Dominio) me error UN da has the el crear hora cluster. In cambio, if creo el Cluster con este nodos if any to crea, pero el fallo viene a hora of connect UN nodo adicional (ya sea o 1 Nodo Nodo 2). Este fallo viene cuando el nodo TR checks are completely funcional in el Cluster, is is "pensando" y da fallo por tiempo sold.
He revisado problemas similar y he visto that el antivirus can be una causa e caso no lo're are only aun no he wont any AV... There comprobado red devices (utilizamos 4, 2 iSCSI, 1 red LAN y otra heart rate), he desactivado los red el protocolo IPv6 devices, he probado connect los nodos con el Kerio Offline, el desactivado firewall of Windows, exportar components del registro TCPIP6, capture las conexiones iSCSI...
El cluster is as en Máquinas Office instalacion del WS2012 y is ha hecho manera person, no mediante VMWare del injerto.
Una nueva prueba as hoy he ha hecho sido realize el cluster 2 maquinas office in una misma Máquina física y to ha s con exito, pero cuando intento realize el 2 nodos cluster (2 machines virtual cada una fisica diferente Máquinas) cuando me da el error. Esto deduzco raiz Quebec are a VMware o red, no lo o problema se, he probado use tan solo 1 switch (infrastructure utilizaria 2), changing IPs, pero igual sigo as can be? contacts? Alguna especifica VMware config?
El caso're llevo several days ago that don't con este problema y no se a what can deber, agradeceria muchisimo the the comunidad ayuda.
MUCHAS Gracias
Buenas
Between 2 workstation are posible realize ese tipo configs of forma limpia.
El problema're (sniffer lo of UN pones veras TR), Los nodos assume ip-spoofing y arp spoofing cuando salen por tarjeta of Red led host.
Para hacer eso as pides, deberias workstation pasar an esxi.
Saludos
-
Cf11 install problem on WIndows server 2012 R2
We have a new installation of windows server 2012 R2 with a new installation standard CF11 installed on the C drive. Everything is 64-bit. The CF Administrator site and the connection works fine. cfm files will not upwards in the default directory, but IIS displays htm thin files. CF Administrator works fine.
Web server configuration tool will only show "None" in the box of the IIS Web Site. The usual CGI, APS, etc. were installed on IIS. IIS and CF11 have in fact been re-installed. Manual run wsconfig.exe shows no errors.
The problem is that any call to a model cfm results an error (html pages serve very well):
Error HTTP 500.0 - internal server error
The page cannot be displayed because an internal server error has occurred.
Detailed error information:
Module IsapiModule
Notification ExecuteRequestHandler
Manager cfmHandler
Error 0x8007007f
URL requested http://localhost: 80 / default.cfm
Physical path C:\inetpub\wwwroot\default.cfm
Can anyone give suggestions for troubleshooting? No newspaper appears to show all information that helps.
Solved the problem... it is not a problem of one CF but and especially an IIS problem...
(1) remove IIS... including the inetpub directory... Remove extensibility .NET Server under the Application Development Manager inetpub misuse this... inetpub should be deleted.
(2) restart
(3) reinstall IIS and enable all the usual stuff, that is to say, CGI, ISAPI, .NET, ASP, WebSocket Protocol, etc. in the application development
(4) restart IIS and CF
(5) Web Server Config set to 'all '.
60 restart IIS and CF
The thing completely reinstall IIS and which is only done if you can delete the folder under the root of the drive-inetpub.
-
Windows Server R2 2012 domain server has problem of tombstone
8614 directory service cannot replicate with this server because the time since the last replication with this server has exceeded the tombstone lifecycle.
I have a primary domain server and five additional domain controller (all servers running windows server 2012 R2), each in the other location. In that four of them works fine. but a single additional DC because of the headstone, because of server has long downtime (more than one year). I also try to demote the domain controller, but unable to it. So is there a solution
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
Maybe you are looking for
-
Spectrogram of base to acquire his VI
Hello Recently, I started to dive into LabView, and I what I imagine to be a pretty basic question here. I'm using LabVIEW 8.5. I use the VI of its acquisition to get data from an external microphone, and I can convert a waveform display this wavefor
-
IT also included [error number: 0x800704DD]
-
OK, so all the USB ports worked very well, but a yellow exclamation appeared recently on ( ) Intel (r) 6 Series/C200 Series Chipset Family controller USB - 1 26 improved host) in the Device Manager, and my PC has no pop up any USB device I plug, so I
-
Application of F1 / reset the date and time
OK could not hang out long so here my problem feel free to move it if you must. Hi everyone I'm new here and I'm looking for the answer to what should be a simple question, but I can't find the answer, anywhere, not even after much research on the in
-
U330 Switchable Graphics Driver Windows 7?
Hi all Just got my new switchable u330 with switchable ATI Radeon HD 3450 graphics. Made the switch to Windows 7 last night and just published in a bunch of problems, especially the lack of access to the switchable graphics. I have checked the Web si