VPN using hotspot with ios 10 does not

Similar Questions

• screenshot with ios 10 does not

  .

  Just updated to 10.0.1 iOS and the screenshot does not...

• I try to use Lovefilm with Silverlight, but does not work. Also how to make a permision in Silverlight for Lovefiulm box

  Siverlight I give permissions. How can I Lovefilm in this box, so I can use it to watch movies like this will not work in Loveilm.

  Hi MayflyQT,

  1. what browser do you use?

  2. What is the exact error message that you receive?

  You can follow this link & check if the problem persists:

  https://www.LOVEFiLM.com/help/dyn_faqs.html?editorial_id=40849

  Hope the helps of information.

• Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."

  Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."  How can this be repaired?

  Hi rebick,.

  Try the troubleshooting steps presented by spirit X in this thread.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Bluetooth/Hotspot tethering without cable does not work

  Hello world

  We have a weird put in place where Bluetooth does not (entirely).

  iPhone is last 9.3.3

  OSX is 10.11.4

  Setting up Personal Hotspot on the iPhone and then connecting via Wi - Fi laptop does not work. Error message "Unable to connect" standard and suggestion of using Wi - Fi diagnostics (also does not help).

  Go to Bluetooth prefs on OSX and the connection it does not work. Matching does not work, but we CAN see the iPhone. The WiFi scanner captures also the iPhone.

  If connect us the iPhone via the cable and then put in place a personal Hotspot, it does not.

  Surfing on the web, everything works. Disconnect the cable, and it stops again.

  I succeeded in pairing my iPhone to the laptop, so it seems apparent to another iPhone. I'm leaving work via cable uses a direct route via the cable which is a different connection method than live bluetooth signal?

  We have removed the Bluetooth of OSX preferences > no change.

  Reset us the iOS network settings > no change.

  Any ideas?

  Best regards, F.

  Have you looked at these?

  Share your Internet connection with Personal Hotspot - Apple Support

  iOS: System requirements for Personal Hotspot - Apple Support

  Get help with Personal Hotspot iOS - Apple Support

  Barry

• Unlock with Apple Watch does not

  Hello

  I'm running a MacBook Air mid-2013 with macOS Sierra, with a 2nd Gen Apple Watch watchOS3 running. I'm on the same Apple for my Air ID, see and iPhone (6 s).

  But unlock with Apple Watch does not work on my Air. I activated 2 factor authentication. I checked the box that allows to unlock with Apple Watch. Everything seems to be kosher.

  When I close and reopen my Air, "Unlock with Apple Watch" appears for about 10 seconds, and then I type my password.

  Help? Thank you!

  I also have this problem. I have 2 accounts on my Macbook. One is the first account that I don't use, second my regular account. On my Second account, it of the same problem, but with the Admin account... It works.

  I Don t know why.

  Do you use also two accounts?

• drop between mid-2009 and IOS device does not

  Mid 2009 Macbook Pro running El Capitan. Bluetooth and wifi on. When I opened Airdrop I see only the symbol of release with message "drop we will share you instantly... to share with someone using a Mac, ask them to go to Airdrop in the Finder. I don't see my IOS device on my Mackbook Pro, or I see my MackBook Pro on my IOS device in parachuting. Tech Genius Bar said that I had to add more storage for MacBook Pro. Made with a new SSD. Still not able to use Airdrop with IOS.

  It works as expected. Drop between iOS devices and Mac requires that the Mac is a 2012 model or newer.

  (140277)

• Last night, I did a scan on my computer. He went only 3% when it froze with the server does not.

  Last night, I did a scan on my computer. He went only 3% when it froze with the server does not.

  Can you please explain the concept of what a server is and how can I ensure this does not happen.

  Thank you very much

  original title: Server

  Last night, I did a scan on my computer. He went only 3% when it froze with the server does not.

  Can you please explain the concept of what a server is and how can I ensure this does not happen.

  Thank you very much

  Launched a scan with which product (be specific, up to the exact version)?

  What version and architecture of Windows are you using?

• I'm opening a JPEG in Adobe Photoshop, but 'Open with' dialog box does not Photoshop

  I'm opening a JPEG in Adobe Photoshop, but the 'Open with' dialog box does not Photoshop in the list of available programs. I have attempte

  Original title: file association

  When Adobe Photoshop is installed it is automatically added to the open with command and usually it is the editor who is added, okay, so in your case, it is not added.

  Right click of your peak, point to open with, click on choose program.

  Put a check mark in the box, always use... If you wish.

  Click on browse, it opens the program files, double-click Adobe, double-click on Photoshop Elements.

  PhotoShopElementsEditor.exe-click, and then click Open

• I currently have an ad - one that I use frequently on IE8 which does not work on IE9. How can I stop to get a message that I have new updates when IE9 is the only update?

  I currently have an ad - one that I use frequently on IE8 which does not work on IE9.  How can I stop to get a message that I have new updates when IE9 is the only update?

  Hi altak38,
   
  -What is the add-on which you speak?
  -Are you referring to Windows Update with Internet Explorer 9 update several times even if it has been installed?
   
  If so, follow the steps in the following article to resolve this problem.
   
  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
   
  Post back with more information for the issuance of the add-on - to help you help.

• Error code 0 xC0000001 on Asus Vivo tab Rt with RT Windows does not start

  Error code 0 xC0000001 on Asus Vivo tab Rt with RT Windows does not start

  Hi guys,.

  I hope you can help, I bought an Asus Vivo tab RT with month windows RT 13 there, I used it only for the first two weeks after I bought and then travel. I went back to find he does not start and going to a blue with 0 xC0000001 error screen after several attempts of the operating system on your PC could not start, so it needs to be repaired.

  It is now one month out of warranty and ASUS refuse to provide support for me, I used the recovery media to reset the Tablet, but still he starts to this message.

  I'm not sure what I can do, I'm totally stuck. Can anyone offer some advice on what I can try? anything via the command prompt?

  At this point I have an expensive paper weight.

  Thanks in advance

  Joel

  Hello Joel,
   
  Usually, the error code 0 xC0000001 indicates that winload.exe in C:\Windows\System32\Boot could not be found or is corrupted. This could be the result of a corrupted download, before the creation of the operating system.

  Since Windows RT came pre-installed and require installation media to retrieve the device, you may need to contact Asus support for assistance.

  http://support.ASUS.com/ServiceHome.aspx?SLanguage=en

  I'm really sorry not to be useful in this regard.

  Please do not hesitate to contact us for any further assistance on Windows.

• Do not use Bus catalyst - typekit exporting does not html

  I read the forums and the so-called solutions. I tried to download directly to can of site that I'm the ftp host. Nothing seems to work.

  If I export the HTML on my local drive and try to download again, it does the same thing. He used to work very well what has changed? I need to go live now! I have all the wrong fonts!

  When I exported to HTML, I used my domain URL name. That did not work. (My domain name is one that is licensed to adobe and I understand that we can host multiple websites with dialing under the license agreement).  So I tried my Client Domain I'm hosting. That no longer works. I tried to post and entered the ftp path that I installed on my hosted client manually.

  What happens here? Please explain how to get this done correctly. I am not using Business Catalyst so it does not apply.

  Ben

  Well now, I guess I should post this as well. It took only 5 tries to do the same thing again and again. He finally works correctly.

  I don't understand why I have a headache. Oh wait, yes I do.

  Problem solved. (this one at least)

  B

• Adobe Edge (with video) + Sizmek does not load on the first attempt in Firefox

  We tried to get a series of Adobe Edge HTML5 with video to work with Sizmek and Firefox and have had no luck.  We did a series of works autour and nothing seems to work.

  But if we do a sequence of basic Adobe Edge it works fine, but as soon as that video is attached it crashes and does not do anything (on initial load).

  We found this banner of Adobe Edge with video works with all browsers except Firefox unique.

  So far, we tried the following solution.

  What has not worked

  • Move the code of compositionReady edge of Sizmek at the head of the document.
  • Mix video load order in the file edge.js
  • Reduces the size of the video thinking it could be a weight of file problem.

  What worked

  • Deleted the video in the Edge file and have basic animation and it works very well.
  • Removed the Sizmek EB codes and it is loaded with videos, but is of no use to us because it does not respect the framework of ad Sizmek platform.
  • Re-build the banner using only the model Sizmek with greensock and works perfectly.

  Have contacted us the support of Sizmek and crossed a few developers and they said that the issue is in the ship's library and the compositionReady event is not dispatched to the first loading of Firefox.

  They have also done a few tests and think it might be a big problem with Adobe Edge and asked that contact us Adobe to find a solution.

  Can someone please point us in the right direction or other solutions of workaround to get the edge work "reliable . ” with Sizmek and Firefox?

  We know that we can build with just all the code, but our digital designers are not coders and need a solution to animation of timeline as opposed to a text editor. (With "Edge animate the logical progression of Adobe Flash for them")

  
  

  Thanks in advance!
  

  My current configuration of the system: MacPro (end 2013)

  Operating system: OSX Yosemite 10.10.4

  Animated adobe Edge Version: Adobe Edge CC 2015

  Version of Firefox: 38.0.1

  
  

  Here is a preview link:

  http://platform.mediamind.com/Eyeblaster.Preview.Web/default.aspx?previewID=9tJlNivoKiW3dH KTuk0LbbCgEiv2EIykKfVwKNgMDykKfuZrA44UDg % 3D % 3D & AdID = 31080610 & lang = en - us

  
  

  Link of the Adobe Edge sample file:

  Dropbox - 970 x 250-video - standard.zip

  .. .on investigated further. including an ogv version seem to fix this problem for some reason any (FF should play mp4s without problem).

  The VGO must be first in the order of the source. I think that this must be done manually in code.

• I need to export contacts as vCard iCloud to able to use android phone, but it does not work

  I need to export contacts as vCard iCloud to able to use android phone, but it does not work

  Help, please

  We need more than "does not work" to be useful.

  How do you try? Is there an error message?

• I have problems with my DNS does not. It happens every day.

  I'm having problems recently with the DNS does not.  However, it is not a constant problem.  I have access to internet, and then a few hours later will have no access.  It went back and just 3 times in more than a few days., I do not have anything to temporarily solve the problem, it only happens on its own. This occurs regardless wireless or direct.  Thank you...

  original title: DNS is not responding

  Hello

  
  1. what operating system is installed on the computer?
  2. were there any changes (hardware or software) to the computer before the show?
  
  Method 1: Perform the steps mentioned below and see if the problem persists.
  a: click on the button "Start".
  b. in the search box, type "invite."
  c. in the list of results, right-click Guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  d. at the command prompt, type ipconfig/flushdns.
   
  Method 2: Click on the link below and see if the problem occurs.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/i-keep-getting-this-message-your-computer-appears/7b1f225b-5936-495e-be3d-9ec1d074d3b5
   
  Method 3: Click on the link below and see if the problem resolves.
  http://support.Microsoft.com/kb/928152
   
  
  Hope this information helps.