VPN works well but domestic internet access via router

Similar Questions

• ASA 5505 VPN works great but can't access internet via the tunnel to customers

  We have an ASA 5505 ASA 8.2.1 running and using IPSec for Remote access clients in the main office.  Remote access is a lot of work, with full access to network resources in the main office and the only thing I can't get to work is access to internet through the tunnel.  I don't want to use split tunneling.  I use ASDM 6.2.1 for configuration.  Any help is appreciated.  I'm probably missing something simple and it looked so much, I'm probably looking at right beyond the error.  Thanks in advance for your time and help!    Jim

  Add a statement of nat for your segment of customer on the external interface

  NAT (outside) - access list

  then allow traffic routing back on the same interface, it is entered in the

  permit same-security-traffic intra-interface

  *

  *

  * more than information can be found here:

  http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a00807...

  On Wednesday, 27 January 2010, at 23:12, jimcanova

• Hi, I have Internet data in my package and I just switched to iPhone 5 4 s, I have to change my number to my new sim card and all is works well but when I go out I do not receive my internet, No 4 G or 3 G appears in the corner, everything is turned on?

  Hi, I have Internet data in my package and I just switch to an iPhone a 4S 5, I have to change my number to my new sim card and all is works well but when I go out I do not receive my internet, No 4 G or 3 G appears in the corner, everything is turned on?

  Contact your carrier and make sure that your account is configured correctly. Then go to settings/general/to comments and press the network name; This will cause the exceptional carrier updates to install (you will see a dialog box saying if an update is needed). In addition, go to settings/general/reset - Reset network settings if none of these fix. You will lose the WiFi passwords, but nothing else.

• T510 - wireless question - connects to the local network but no Internet access

  Hi all

  I have a laptop Lenovo T510 with Windows 7.

  Network adapter: Intel Centrino Advanced - N 6200 AGN with the version of the driver 13.2.0.30.

  I am facing problem seroius in wireless connection at home, I am able to connect wireless instead of office and friends.

  Wireless Networks are detected and I can connect to WiFi by the way of the key. And the status is indicated and is connected but no internet access.

  Please help me to get this resolved.

  Thank you

  Pavan K

  Thank you all for your support and your help... its working fine after re-starting the router

• just installed wireless com-cast, printer works well, but now I can not fax.

  just installed wireless com-cast, printer works well, but now I can not fax. When I do a fax of the SEZ of reading test, "no phone" I tried the direct link 'wall of fax' (or printer) I lose my phone connection?

  Tuesday, October 9, 2012 17:30:39 + 0000, Dimas_888 wrote:

  just installed wireless com-cast, printer works well, but now I can not fax. When I do a fax of the SEZ of reading test, "no phone" I tried the direct link 'wall of fax' (or printer) I lose my phone connection?

  You must connect to the terrestrial telephone line - outlet. But
  You can buy cheaply something that fits into the wall
  taking current and made the two simple output Sockets.

  Ken Blake, Microsoft MVP

• Satellite L455-S5045 laptop Realtek8187B wireless 802. 11b / g connects to a d-link router, but not internet access.

  PC laptop Toshiba Satellite L455-S5045, Realtek8187B wireless 802. 11b / g connects to a d-link router, but not internet access. go to google.com and States page cannot be displayed, I ran diagnostics and reports, everything is configured properly. the wireless signal that d-Link has is 802.11n with a WiFi Code and running XP, I have WIN 7. Do I need to driver 802.11n, if I do, why I can not download it

  Hello

  To help you better, please answer these questions.

  1. don't you say no Internet access in the notification bar?

  2. what diagnosis you have to run?

  3 did you do changes on the computer before the show?

  To solve your problem, try the provided items.

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  You can check the link:

  Troubleshooting Wizard

  Reference (my computer can not connect to Internet)

  http://support.Toshiba.com/support/troubleshootSelfService?PRDTYPE=computers

  If you need help with the Windows operating system, just tell me and we will be happy to help you.

• 8 win having address IP & gateway, but not Internet access

  This laptop is IPv4 address 192.168.1.13 (valid for my setup) and gateway 192.168.1.1 (even), but no Internet access? What is going on??

  I've implemented a number of victory 8 machines, but this laptop that I just got and win update 8, now, will not connect to the internet?

  All my other machines, phones, computers, iPad, android tablet, all to connect to the router and have internet access.

  I searched this problem and tried a few suggestions to no effect:

  1. drivers of device updated for lan and WiFi and restarted and still NOGO!
  2. has run a few commands cmd for ipconfig

  What is going on??

  Thank you very much for any help you might be able to provide!

  -Brian

  Brian

  Please download this app from the
  Run it
  Download output to a drive or any file sharing service
  Put a link to them in your next post
  Please enter each of them in a command prompt high after you run the above and save the file

  ipconfig/flushdns

  ipconfig/registerdns

  ipconfig/release

  ipconfig / renew

  NETSH winsock reset catalog

  NETSH int ipv4 reset reset.log

  NETSH int ipv6 reset reset.log

  Output

• I have the free cc that I would try to LR but it will download not advice? PS has worked well but no luck with LR.

  I have the free cc that I would try to LR but it will download not advice? PS has worked well but no luck with LR.

  When you ask a question you will need to provide some basic information

  -Forum quick start https://forums.adobe.com/docs/DOC-5601

  Mac or Windows and EXACTLY what version of the operating system?

  Recent Mac AND Windows operating systems have been known to cause problems "weird."

  Using a full account of computer administrator with read/write permission?

  This error message you see?

• I use PS extended 6. It works well, but it will not be updated. I'll take a notice in my application creative cloud he has an update waiting. I'll click on the UPDATE button and it works 100% and then give me a update failure message.

  I use PS extended 6. It works well, but it will not be updated. I'll take a notice in my application creative cloud he has an update waiting. I'll click on the UPDATE button and it works 100% and then give me a update failure message.

  I fixed the old-fashioned way. Uninstall - reinstall. Works fine now.

• My desktop version of my site works well but the mobile and tablet versions have any overlap and the entire page. If I can't pin things that it stops?

  My desktop version of my site works well but the mobile and tablet versions have any overlap and the entire page. If I can't pin things that it stops?

  Hi Pedro,

  Make sure that when you design the phone and tablet version to keep in mind the limits of dimensions.

  Please share the url of your site for further analysis.

  Kind regards

  Akshay

• No Internet access - network/router wireless connection problem

  I can't connect to the internet after installing Windows 7 64 bit. I can see the router wireless/network from my computer, but it has sometimes limited connectivity or it says connected but no internet access. I used Windows diagnostic tools to try to fix it but it does not work, and my router connects without a doubt to the internet such that I now use on a portable computer that is on the same network. I would like to know if anyone else has this problem and if they fixed. I tried to change the physical address of the connection to the local network, but it didn't work, I guess because I connect via radio and no cable, and I heard similar stories on other forums that this can be a problem more common I suspect. Thanks in advance for your answer, and all the details you need I'll try my best to provide.

  OK I finally got to work, all we needed was for me to download the latest drivers (Realtek 8185 wireless card) off-site and install in compatibility mode, and then he worked all of a sudden. I hope this will help someone suffering from a similar problem!

• VPN client works well, but I am not able to open the desktop remotely

  Hi all

  I configured a router 877 with features of firewall and VPN and DDNS, when the user connects his WAN pc via VPN all works well (mail, telnet, ping, LAN access) but the Remote Desktop feature is not available. I traced with wireshark and saw that the request to port 3389 was correctly sent to the destination server, but the response to the VPN client has been abandoned by the router... and I have no idea how to solve this problem.

  Can someone help me...? Thank you very much.

  Ilaria.

  In room router attached.

  Your problem is the NAT-config. First of all, the next line is not necessary that RDP does not have UDP ober:

  IP nat inside source static udp 192.168.10.136 3389 3389 Dialer0 interface

  Then, the following command causes problems:

  IP nat inside source static tcp 192.168.10.136 3389 3389 Dialer0 interface

  With which the router assumes that the server 192.168.10.136 must always be reached through the IP address of dialer0 and made a translation.

  There are two ways to solve the problem, but they all have some disadvantages...

  (1) only access the server through VPN. For that you can just remove the NAT statement above (the one with tcp) and you should be able to reach the server via VPN.

  (2) restrict the NAT for not doing a translation if a VPN-peer's access to the server.

  To do this, you must attach a roadmap to the NAT statement. But who does not work with the "interface" - keyword in the NAT Statement. But you can use it if you get a fixed IP address from your provider.

  (3) assign a second IP address to the RDP server. The period of the original INVESTIGATION that is used in the NAT statement is used to access the server without VPN, the second IP address is used to access the server through VPN.

  --
  Don't stop once you have upgraded your network! Improve the world by lending money to low-income workers:
  http://www.Kiva.org/invitedBy/karsteni

• Wireless connected but no Internet access

  I have a new (5 months) Acer Aspire 5732Z which works in Windows 7. Wireless connection shows that it is connected (full bars) but I have no internet access (there is a signal of yellow exclamation over bars error). I have another laptop running Windows XP which connects well to the same wireless router and wireless for Acer worked very well so far. I was on the phone with my ISP and they said, because it shows that the computer is connected to the wireless, they cannot help me. Anyone has any ideas that can help me?

  Thank you. I decided to call my Internet provider again and this rep was able to solve the problem without delay. From what I learned, if you get a representative who was not helpful, call again...

• It would work for a WLAN internet access?

  Hi, everyone, I have a few questions about how to implement public access to Internet in our workplace that would not allow access to our local network.  We have several access points 2702 and 2504 WLAN controller.  Two of the four interfaces on the 2504 have intellectual property in the ranks of our LAN subnets.  I assigned a VLAN for public access to the Internet, but do not know how I would implement on our infrastructure past.  Instead, I was thinking about a cable connected to one of the unused interfaces on the 2504 to a port on our DMZ switch and having traffic for the public Internet, out across the demilitarized zone.  If I had to do this way, but also created a scope DHCP for the public Internet, and the DHCP scope were on an interface that had an address on the local corporate network, customers would always get the address?  What is the best way to do it?

  A second question I have is about how the traffic between the access points and the controller is managed.  When a client connects to the access point, their traffic get dug to the controller and then thrown on the LAN, or the traffic goes to the local network directly from the access point?  The reason why I ask is that we have a remote office that we would like to manage the access point of the controller in the Office at home, but we do not want necessarily all their traffic going back or the office, if it was intended for office network at home, or if it is intended for the Internet.  The remote desktop has its own local internet connection and is just VPN'ing to the desktop at home for internal network traffic.  DHCP for clients at the remote office is managed by a DHCP server on the router on this effect.  A remote desktop access point connected to the controller in the head office would be able to use the DHCP server on the router to the remote desktop?  I test that out in a lab environment and I couldn't get it to work this way.  Remote desktop access point is currently running in mode independent and done a good job.  In the future, this site will also get on our MPLS and finally all traffic going to get dug towards the Home Office, including Internet access, so perhaps at that time, attach the remote AP to the controller would be better.

  Thank you!

   A second question I have is regarding to how traffic is handled between the access points and the controller. When a client connects to the access point, does their traffic get tunnelled to the controller and then dumped onto the LAN, or does the traffic go to the LAN directly from the access point? 

  In local mode APs switch always centralized traffic, that is to say CAPWAP tunnel established between AP & WLC. If all traffic comments terminate at WLC connected switch.

  In your case, if you map the traffic comments-SSID to the physical port connects to the DMZ switch, guest SSID users end traffic to DMZ switch. You must ensure that traffic vlan is not go on any other connected WLC trunk ports.

  If AP mode FlexConnect, then traffic will end at the switch where AP connected locally.

  HTH

  Rasika

  Pls note all useful responses *.

• Ethernet or wireless is connected but no Internet access

  My laptop OS is Win 7 64 bit. My laptop able to connect to the internet, but it suddenly can't connect to the internet via the Ethernet or wireless. I tried to system restore and it worked fine, but after I stopped, the problem was took place again. I don't know if because of the McAfee antivirus or window updates because it has some errors (to McAfee) and Skype has been updated before I had this problem (no internet access).

  McAfee has been updated at the same time as the last batch of updates from Windows 7 and this is the cause of problems of internet connection for most, if not all, users of McAfee.

  See the communication from this "criticism" - McAfee

  Some customers may experience a loss of network connectivity and/or errors in McAfee Security Center after a recent update

  You should make the fix McAfee, if necessary. There are corresponding communications for their enterprise products.